Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group
  • Journal of the Optical Society of Korea
  • Vol. 18,
  • Issue 6,
  • pp. 657-662
  • (2014)

Simulation and Experimental Validation of Gain-Control Parallel Hybrid Fiber Amplifier

Open Access Open Access

Abstract

We demonstrate a simulation of a parallel hybrid fiber amplifier in the C+L-band with a gain controlling technique. A variable optical coupler is used to control the input signal power for both EDFA and RFA branches. The gain spectra of the C+L-band are flattened by optimizing the coupling ratio of the input signal power. In order to enhance the pump conversion efficiency, the EDFA branch was pumped by the residual Raman pump power. A gain bandwidth of 60 nm from 1530 nm to 1590 nm is obtained with large input signal power less than -5 dBm. The gain variation is about 1.06 dB at a small input signal power of -30 dBm, and it is reduced to 0.77 dB at the large input signal power of -5 dBm. The experimental results show close agreement with the simulation results.

© 2014 Optical Society of Korea

PDF Article
More Like This
Wideband full double-pass serial hybrid fiber amplifier utilizing L-shape configuration

Aseel A. Khudhair, M. H. Ali, and A. K. Abass
Appl. Opt. 60(34) 10680-10683 (2021)

Low noise figure all-optical gain-clamped parallel C+L band Erbium-doped fiber amplifier using an interleaver

L. L. Yi, L. Zhan, C. S. Taung, S. Y. Luo, W. S. Hu, Y. K. Su, Y. X. Xia, and Lufeng Leng
Opt. Express 13(12) 4519-4524 (2005)

Cited By

Optica participates in Crossref's Cited-By Linking service. Citing articles from Optica Publishing Group journals and other participating publishers are listed here.


Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All Rights Reserved