OSA's Digital Library

Journal of Optical Technology

Journal of Optical Technology

| SIMULTANEOUS RUSSIAN-ENGLISH PUBLICATION

  • Vol. 79, Iss. 12 — Dec. 1, 2012
  • pp: 769–774

Method of synthesizing hologram projectors based on breaking down the structure of an object into typical elements, and a software package for implementing it

S. N. Koreshev, O. V. Nikanorov, and A. D. Gromov  »View Author Affiliations


Journal of Optical Technology, Vol. 79, Issue 12, pp. 769-774 (2012)
http://dx.doi.org/10.1364/JOT.79.000769


View Full Text Article

Acrobat PDF (1010 KB)





Browse Journals / Lookup Meetings

Browse by Journal and Year


   


Lookup Conference Papers

Close Browse Journals / Lookup Meetings

Article Tools

Share
Citations

Abstract

A method is proposed for synthesizing Fresnel hologram projectors, based on breaking down the structure of an object into typical elements. The possibility provided by this method of substantially reducing the volume of required computations is pointed out as one of the main advantages of the proposal. A software package for synthesizing and reconstructing Fresnel hologram projectors is described that implements this method. The results of an experimental study of the package are presented, obtained in the process of a comparative analysis of the proposed method and a traditional method of synthesizing hologram projectors.

© 2012 OSA

History
Original Manuscript: July 25, 2012
Published: December 31, 2012

Citation
S. N. Koreshev, O. V. Nikanorov, and A. D. Gromov, "Method of synthesizing hologram projectors based on breaking down the structure of an object into typical elements, and a software package for implementing it," J. Opt. Technol. 79, 769-774 (2012)
http://www.opticsinfobase.org/jot/abstract.cfm?URI=jot-79-12-769


Sort:  Author  |  Year  |  Journal  |  Reset

References

  1. S. N. Koreshev and V. P. Ratushnyĭ, “Using the method of holography to obtain images of two-dimensional objects when solving problems of high-resolution photolithography,” Opt. Zh. 71, No. 10, 32 (2004). [J. Opt. Technol. 71, 673 (2004)].
  2. S. N. Koreshev and V. P. Ratushnyi, “Holographic method for obtaining images with limiting high resolution for extreme short-wave lithography problems,” Proc. SPIE 5290, 221 (2004). [CrossRef]
  3. F. Clube, S. Gray, D. Struchen, J. Tisserand, S. Malfoy, and Y. Darbellay, “Holographic microlithography,” Opt. Eng. 34, 2724 (1995). [CrossRef]
  4. S. N. Koreshev and V. P. Ratushnyĭ, “Focused image holograms in high-resolution holographic projection photolithography,” Opt. Spektrosk. 101, 1038 (2006). [Opt. Spectrosc. 101, 976 (2006)]. [CrossRef]
  5. C. Jacobsen and M. Howells, “Projection x-ray lithography using computer-generated holograms: a study of compatibility with proximity lithography,” J. Appl. Phys. 71, 2993 (1992). [CrossRef]
  6. P. P. Naullenau, F. Salmassi, E. M. Cullikson, and J. A. Liddle, “Design and fabrication of a high-efficiency extreme-ultraviolet binary phase-only computer-generated hologram,” Appl. Opt. 46, 2581 (2007). [CrossRef]
  7. S. N. Koreshev, O. V. Nikanorov, and V. P. Ratushnyĭ, “Reconstruction of synthesized holograms fresnel projectors at angles of incidence of reconstructing wave that exceed the angle of incidence of the reference wave in hologram synthesis,” Opt. Spektrosk. 111, 156 (2011). [Opt. Spectrosc. 111, 134 (2011)]. [CrossRef]
  8. S. N. Koreshev, O. V. Nikanorov, Yu. A. Ivanov, and I. A. Kozulin, “Program system for synthesis and digital reconstruction of holograms-projectors: synthesis parameters effect on image reconstruction quality,” Opt. Zh. 77, No. 1, 42 (2010). [J. Opt. Technol. 77, 33 (2010)].
  9. T. Shimobaba, H. Nakayama, N. Masuda, and T. Ito, “Rapid calculation algorithm of Fresnel computer-generated hologram using look-up table and wavefront-recording plane methods for three-dimensional display,” Opt. Express 18, 19504 (2010). [CrossRef]
  10. M. Lucente, “Interactive computation of holograms using a ‘look-up table’,” J. Electron. Imaging 2, No. 1, 28 (1993). [CrossRef]
  11. S. C. Kim and E. S. Kim, “Effective generation of digital holograms of three-dimensional objects using a novel ‘look-up table method’,” Appl. Opt. 47, No. 19, D55 (2008). [CrossRef]
  12. S. C. Kim and E. S. Kim, “Fast computation of hologram patterns of a 3D object using run-length encoding and novel look-up table methods,” Appl. Opt. 48, 1030 (2009). [CrossRef]
  13. S. N. Koreshev, O. V. Nikanorov, and I. A. Kozulin, “Choosing the synthesis parameters of hologram-projectors for photolithography,” Opt. Zh. 75, No. 9, 29 (2008). [J. Opt. Technol. 75, 558 (2008)].

Cited By

Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.

« Previous Article  |  Next Article »

OSA is a member of CrossRef.

CrossCheck Deposited