OSA's Digital Library

Energy Express

Energy Express

  • Editor: Christian Seassal
  • Vol. 21, Iss. S1 — Jan. 14, 2013
  • pp: A1–A6

GaN light emitting diodes with wing-type imbedded contacts

Ray-Hua Horng, Kun-Ching Shen, Yu-Wei Kuo, and Dong-Sing Wuu  »View Author Affiliations


Optics Express, Vol. 21, Issue S1, pp. A1-A6 (2013)
http://dx.doi.org/10.1364/OE.21.0000A1


View Full Text Article

Enhanced HTML    Acrobat PDF (914 KB)





Browse Journals / Lookup Meetings

Browse by Journal and Year


   


Lookup Conference Papers

Close Browse Journals / Lookup Meetings

Article Tools

Share
Citations

Abstract

A wing-type imbedded electrodes was introduced into the lateral light emitting diode configuration (WTIE-LEDs) to reduce the effect of light shading of electrode in conventional sapphire-based LEDs (CSB-LEDs). The WTIE-LEDs with double-side roughened surface structures not only can eliminate the light shading of electrode and bonding wire, but also increase the light extraction and light output power. Contrast to CSB-LEDs, a 79% enhancement of output intensity in the WTIE-LED was obtained at 100 mA injection current. Similarly, the output power of packaged WTIE-LEDs was enhanced 59% higher compared with the packaged CSB-LEDs at the same injection condition. Therefore, using the imbedded contact to reduce light shading would be a promising prospective for LEDs to achieve high output power.

© 2012 OSA

OCIS Codes
(230.3670) Optical devices : Light-emitting diodes
(250.0250) Optoelectronics : Optoelectronics

ToC Category:
Light-Emitting Diodes

History
Original Manuscript: September 5, 2012
Revised Manuscript: October 14, 2012
Manuscript Accepted: October 15, 2012
Published: November 7, 2012

Citation
Ray-Hua Horng, Kun-Ching Shen, Yu-Wei Kuo, and Dong-Sing Wuu, "GaN light emitting diodes with wing-type imbedded contacts," Opt. Express 21, A1-A6 (2013)
http://www.opticsinfobase.org/oe/abstract.cfm?URI=oe-21-S1-A1


Sort:  Author  |  Year  |  Journal  |  Reset  

References

  1. R. H. Horng, S. H. Huang, C. Y. Hsieh, X. Zheng, and D. S. Wuu, “Enhanced luminance efficiency of wafer-bonded InGaN-GaN LEDs with double-side textured surfaces and omnidirectional reflectors,” IEEE J. Quantum Electron.44(11), 1116–1123 (2008). [CrossRef]
  2. W. S. Wong, T. Sands, N. W. Cheung, M. Kneissl, D. P. Bour, P. Mei, L. T. Romano, and N. M. Johnson, “Fabrication of thin-film InGaN light-emitting diode membranes by laser lift-off,” Appl. Phys. Lett.75(10), 1360–1362 (1999). [CrossRef]
  3. Z. S. Luo, Y. Cho, V. Loryuenyong, T. Sands, N. W. Cheung, and M. C. Yoo, “Enhancement of (In, Ga)N light-emitting diode performance by laser liftoff and transfer from sapphire to silicon,” IEEE Photon. Technol. Lett.14(10), 1400–1402 (2002). [CrossRef]
  4. M. K. Kelly, O. Ambacher, B. Dahlheimer, G. Groos, R. Dimitrov, H. Angerer, and M. Stutzmann, “Laser processing for patterned and freestanding nitride films,” Appl. Phys. Lett.69(12), 1749–1751 (1996). [CrossRef]
  5. C. F. Chu, F. I. Lai, J. T. Chu, C. C. Yu, C. F. Lin, H. C. Kuo, and S. C. Wang, “Study of GaN light-emitting diodes fabricated by laser lift-off technique,” J. Appl. Phys.95(8), 3916–3922 (2004). [CrossRef]
  6. W. S. Wong, T. Sands, and N. W. Cheung, “Damage-free separation of GaN thin films from sapphire substrates,” Appl. Phys. Lett.72(5), 599–601 (1998). [CrossRef]
  7. S. H. Huang, R. H. Horng, S. L. Li, K. W. Yen, D. S. Wuu, C. K. Lin, and H. Liu, “Thermally stable mirror structures for vertical-conducting GaN/mirror/Si light-emitting diodes,” IEEE Photon. Technol. Lett.19(23), 1913–1915 (2007). [CrossRef]
  8. Y. S. Wu, J.-H. Cheng, W. C. Peng, and H. Ouyang, “Effects of laser sources on the reverse-bias leakages of laser lift-off GaN-based lightemitting diodes,” Appl. Phys. Lett.90(25), 251110 (2007). [CrossRef]
  9. O. B. Shchekin, J. E. Epler, T. A. Trottier, T. Margalith, D. A. Steigerwald, M. O. Holcomb, P. S. Martin, and M. R. Krames, “High performance thin-film flip-chip InGaN–GaN light-emitting diodes,” Appl. Phys. Lett.89(7), 071109 (2006). [CrossRef]
  10. R. H. Horng, Y. A. Lu, and D. S. Wuu, “Light Extraction Investigation for Thin-Film GaN Light-Emitting Diodes with Imbedded Electrodes,” IEEE Photon. Technol. Lett.23(1), 54–56 (2011). [CrossRef]
  11. S. Kim, J.-H. Jang, J.-S. Lee, and D. J. Duquette, “Stress behavior of electrodeposited copper films as mechanical supporters for light emitting diodes,” Electrochim. Acta52(16), 5258–5265 (2007). [CrossRef]
  12. T. Chen, Y. Wang, P. Xiang, R. Luo, M. Liu, W. Yang, Y. Ren, Z. He, Y. Yang, W. Chen, X. Zhang, Z. Wu, Y. Liu, and B. Zhang, “Crack-free InGaN multiple quantum wells light-emitting diodes structures transferred from Si (111) substrate onto electroplating copper submount with embedded electrodes,” Appl. Phys. Lett.100(24), 241112 (2012). [CrossRef]

Cited By

Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.

Figures

Fig. 1 Fig. 2 Fig. 3
 
Fig. 4 Fig. 5
 

Next Article »

OSA is a member of CrossRef.

CrossCheck Deposited