OSA's Digital Library

Optics Express

Optics Express

  • Editor: Michael Duncan
  • Vol. 14, Iss. 8 — Apr. 17, 2006
  • pp: 3247–3254

Testing of steep convex aspheric surface with a Hartmann sensor by using a CGH

Ho-Soon Yang, Jae-Bong Song, In-Won Lee, and Yun-Woo Lee  »View Author Affiliations


Optics Express, Vol. 14, Issue 8, pp. 3247-3254 (2006)
http://dx.doi.org/10.1364/OE.14.003247


View Full Text Article

Enhanced HTML    Acrobat PDF (463 KB)





Browse Journals / Lookup Meetings

Browse by Journal and Year


   


Lookup Conference Papers

Close Browse Journals / Lookup Meetings

Article Tools

Share
Citations

Abstract

Most aspheric surfaces have been tested by interferometer with some null correctors. This approach, however, often fails when there are many aspherical terms or test surface is very steep because it is not easy to design the conventional null lens or CGH (Computer Generated Hologram). On the other hand, 3-D profilometer can measure aspheric surfaces without any null correctors; however, it takes some time to measure, which makes it unsuitable for the production line in the factory. In this paper, we apply the Hartmann test to the measurement of steep convex aspheric surfaces of which diameter is about 16 mm. In order to increase the measurement accuracy, we calibrated the test setup using a CGH that simulates the ideal test surface. We demonstrated that the significant amount of error in the test setup could be removed by this calibration process. The test results showed only 2 nm rms WFE (wave front error) difference even though the WFE of test setup was worsened by more than 0.13 μm rms. Since this method makes it possible to measure highly aspheric surface quickly and accurately, it can be used in the production line.

© 2006 Optical Society of America

OCIS Codes
(090.1760) Holography : Computer holography
(120.3930) Instrumentation, measurement, and metrology : Metrological instrumentation
(120.6650) Instrumentation, measurement, and metrology : Surface measurements, figure

ToC Category:
Instrumentation, Measurement, and Metrology

History
Original Manuscript: February 23, 2006
Revised Manuscript: March 31, 2006
Manuscript Accepted: April 11, 2006
Published: April 17, 2006

Virtual Issues
Vol. 1, Iss. 5 Virtual Journal for Biomedical Optics

Citation
Ho-Soon Yang, Jae-Bong Song, In-Won Lee, and Yun-Woo Lee, "Testing of steep convex aspheric surface with a Hartmann sensor by using a CGH," Opt. Express 14, 3247-3254 (2006)
http://www.opticsinfobase.org/oe/abstract.cfm?URI=oe-14-8-3247


Sort:  Author  |  Year  |  Journal  |  Reset  

References

  1. D. Malacara, "Null tests using compensators," in Optical shop testing (Wiley, New York, 1992), Ch. 12.
  2. D. Malacara, "Hartmann and other screen tests," in Optical shop testing (Wiley, New York, 1992), Ch. 10.
  3. J. H. Burge, "Fizeau interferometry for large convex surfaces," in Optical manufacturing and testing, V.J.Doherty, and H.P.Stahl, eds., Proc. SPIE 2536, 127-138 (1995). [CrossRef]
  4. T. H. Kim, J. Burge, Y. W. Lee, and S.S. Kim, "Null test for highly paraboloidal mirror," Appl. Opt. 43, 3614-3618 (2004). [CrossRef] [PubMed]
  5. V. A. Zverev, S. A. Rodionov, M. N. Sokol'skii, and V. V. Usoskin, "Testing of the primary mirror of the LAT (large azimuthal telescope) by the Hartmann method during its manufacture," Sov. J. Opt. Technol. 44, 127-129 (1977).
  6. H.-S. Yang, Y.-W. Lee, J.-B. Song, and I.-W. Lee, "Null Hartmann test for the fabrication of large aspheric surfaces," Opt. Exp., 1839-1847 (2005). [CrossRef] [PubMed]
  7. J. Pfund, N. Lindlein, and J. Schwider, "Misalignment effects of the Shack-Hartmann sensor," Appl. Opt. 37, 22-27 (1998). [CrossRef]
  8. J. Pfund, N. Lindlein, and J. Schwider, "Nonnull testing of rotationally symmetric aspheres: a systematic error assessment," Appl. Opt. 40, 439-446 (2001). [CrossRef]
  9. T. M. Jeong, M. Menon, and G. Yoon, "Measurement of wave-front aberration in soft contact lenses by use of a Shack-Hartmsnn wave-front sensor," Appl. Opt. 44, 4523-4527 (2005). [CrossRef] [PubMed]
  10. R. Diaz-Uribe, and M. Campos-Garcia, "Null-screen testing of fast convex aspheric surfaces," Appl. Opt. 39, 2670-2677 (2000). [CrossRef]
  11. M. Campos-Garcia, R. Diaz-Uribe, and F. Granados-Agustin, "Testing fast aspheric convex surfaces with a linear array of sources," Appl. Opt. 43, 6255-6264 (2004). [CrossRef] [PubMed]
  12. W. H. Southwell, "Wavefront estimation fromm wavefront slope measurements," J. Opt. Soc. Am. 70, 998-1006 (1980). [CrossRef]

Cited By

Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.


« Previous Article  |  Next Article »

OSA is a member of CrossRef.

CrossCheck Deposited