Double clad tapered fiber for high power applications
Optics Express, Vol. 16, Issue 3, pp. 1929-1944 (2008)
http://dx.doi.org/10.1364/OE.16.001929
Enhanced HTML
Acrobat PDF (386 KB)
Abstract
We report a novel type of active fiber – tapered double clad fiber suitable for pumping by low brightness sources with large beam parameter product of 50÷300 mm×mrad. Ytterbium double clad all-silica fiber (core/1st clad/2nd clad diameters 27/834/890 µm, NAcore=0.11, NAclad=0.21), tapered down by a factor 4.8 for a length of 10.5 m was drawn from a preform fabricated by plasma chemical technologies. At a moderate Yb-ion concentration and 1:31 core/cladding ratio, the tapered double clad fiber demonstrates 0.9 dB/m pump absorption at 976 nm and excellent lasing slope efficiency. An ytterbium fiber laser with 84 W of output power and 92% slope efficiency, a 74 W superfluorescent source with 85% slope efficiency and amplifiers operating both in CW and pulsed regimes have been realized. All devices demonstrated robust single mode operation with a beam quality factor of M2=1.07.
© 2008 Optical Society of America
OCIS Codes
(060.2280) Fiber optics and optical communications : Fiber design and fabrication
(060.2320) Fiber optics and optical communications : Fiber optics amplifiers and oscillators
(060.3510) Fiber optics and optical communications : Lasers, fiber
ToC Category:
Fiber Optics and Optical Communications
History
Original Manuscript: November 9, 2007
Revised Manuscript: December 20, 2007
Manuscript Accepted: January 14, 2008
Published: January 28, 2008
Citation
V. Filippov, Yu. Chamorovskii, J. Kerttula, K. Golant, M. Pessa, and O. G. Okhotnikov, "Double clad tapered fiber for high power applications," Opt. Express 16, 1929-1944 (2008)
http://www.opticsinfobase.org/oe/abstract.cfm?URI=oe-16-3-1929
Sort: Year | Journal | Reset
References
- www.ipgphotonics.com
- Y. Jeong, J. K. Sahu, D. N. Payne, and J. Nilsson, "Ytterbium-doped large-core fiber laser with 1.36 kW continuous-wave output power," Opt. Express 12, 6088-6092 (2004). [CrossRef] [PubMed]
- D. Young and C. Roychoudhuri, "Results and comparison of a cladding pumped fiber simulation using a decagon-shaped fiber," Opt. Express 11, 830-837 (2003). [CrossRef] [PubMed]
- J. J. Koponen, M. J. Soderlund, H. J. Hoffman, and S. K. Tammela, "Measuring photodarkening from single-mode ytterbium doped silica fibers," Opt. Express 14, 11539-11544 (2006). [CrossRef] [PubMed]
- B. Morasse, S. Chatigny, E. Gagnon, C. Hovington, J-P. Martin, and J-P. de Sandro, "Low photodarkening single cladding ytterbium fiber amplifier," Proc. SPIE 6453, 64530H-1-64530H-9 (2007). [CrossRef]
- S. Yoo, C. Basu, A. J. Boyland, C. Sones, J. Nilsson, J. K. Sahu, and D. Payne, "Photodarkening in Yb-doped aluminosilicate fibers induced by 488nm irradiation," Opt. Lett. 32, 1626-1628 (2007). [CrossRef] [PubMed]
- J. Kirchhof, S. Unger, V. Reichel, and A. Schwuchow, "Background loss and devitrification in Nd-doped fiber laser glass," Optical Fiber Conference Technical Digest, 60-61 (1996).
- P. Koplow, D. Kliner, and L. Goldberg, "Single-mode operation of a coiled multimode fiber amplifier," Opt. Lett. 25, 442-444 (2000). [CrossRef]
- J. Limpert, N. Deguil-Robin, I. Manek-Honninger, F. Salin, F. Roser, A. Liem, T. Schreiber, S. Nolte, H. Zellmer, A. Tunnermann, J. Broeng, A. Petersson, and C. Jacobsen, "High-power rod-type photonic crystal fiber laser," Opt. Express 13, 1055-1058 (2005), http://www.opticsinfobase.org/abstract.cfm?URI=oe-13-4-1055 [CrossRef] [PubMed]
- J. Limpert, O. Schmidt, J. Rothhardt, F. Roser, T. Schreiber, A. Tunnermann, S. Ermeneux, P. Yvernault, and F. Salin, "Extended single-mode photonic crystal fiber lasers," Opt. Express 14, 2715-2720 (2006). [CrossRef] [PubMed]
- A. Liu and K. Ueda, "The absorption characteristics of circular, offset, and rectangular double-clad fibers," Optics Commun. 132, 511-518 (1996). [CrossRef]
- P. Leproux, S. Fevrier, V. Doya, P. Roy, and D. Pagnoux, "Modeling and optimization of double-clad fiber amplifiers using chaotic propagation of pump," Opt. Fiber Technol. 6, 324-339 (2001). [CrossRef]
- V. Doya, O. Legrand, and F. Mortessagne, "Optimized absorption in a chaotic double-clad fiber amplifier," Opt. Lett. 26,872-874 (2001). [CrossRef]
- D. Kouznetsov, J. Moloney, and E. Wright, "Efficiency of pump absorption in double-clad fiber amplifiers. I. Fiber with circular symmetry," J. Opt. Soc. Am. B 18, 743-749 (2001). [CrossRef]
- D. Kouznetsov and J. Moloney, "Efficiency of pump absorption in double-clad fiber amplifiers. II. Broken circular symmetry," J. Opt. Soc. Am. B 19, 1259-1263 (2002). [CrossRef]
- D. Kouznetsov and J. Moloney, "Efficiency of pump absorption in double-clad fiber amplifiers. III. Calculation of modes," J. Opt. Soc. Am. B 19, 1304-1309 (2002). [CrossRef]
- H. Po, "Ring core fiber," PCT patent WO 02/079829 A1.
- H. Po, "Optical fiber," PCT patent WO 03/010578 A1.
- A. Carter, K. Tankala, and N. Jacobson, "Cladding-pumped optical fiber," US patent 6.625.363 B2
- M. Fermann, "Single-mode excitation of multimode fibers with ultrashort pulses," Opt. Lett. 23,52-54 (1998). [CrossRef]
- A. Carter, K. Tankala, and M. Seifert, "Double-clad optical fiber for lasers and amplifiers," US patent 6.687.445 B2.
- D. Marcuse, "Coupled power equations for lossy fibers," Appl. Opt. 17, 3232-3237 (1978). [CrossRef] [PubMed]
- J. Nilsson, S.-U. Alam, J. A. Alvarez-Chavez, P. W. Turner, W. A. Clarkson, and A. B. Grudinin, "High-power and tunable operation of erbium-ytterbium co-doped cladding-pumped fiber lasers," IEEE J. Quantum Electron. 39, 987-994 (2003). [CrossRef]
- D. Marcuse, Light Transmission Optics, (Van Nostrand Reinhold Company, New York, 1972), Chap. 9.
- E. M. Dianov, K. M. Golant, V. I. Karpov, R. R. Khrapko, A. S. Kurkov, V. N. Protopopov, S. L. Semenov and A. G. Shebuniaev, "Application of reduced-pressure plasma CVD technology to the fabrication of Er-doped optical fibers," Opt. Mater. 3, 181-185 (1994). [CrossRef]
- A. C. Boucouvalas and G. Georgiou, "External refractive-index response of tapered coaxial couplers," Opt. Lett. 11, 257-259, (1986). [CrossRef] [PubMed]
- K. Kieu and M. Mansuripur, "Tuning of fiber lasers by use of a single-mode biconic fiber taper," Opt. Lett. 31, 2435-2437 (2006). [CrossRef] [PubMed]
- S. A. Kingsley and D. E. N. Davies, "Multimode optical-fibre phase modulators and discriminators: I-Theory," Electron. Lett. 14, 322-324 (1978). [CrossRef]
- V. B. Veinberg and D. K. Sattarov, Waveguide Optics, (Mashinostroenie, Leningrad, 1977), Chap.5 (in Russian).
- N. S. Kapany and J. J. Burke, Optical Waveguides, (Academic Press, New York, 1972).
- P. Wang and W. A. Clarkson, "High-power, single mode, linearly polarized, ytterbium-doped fiber superfluorescent source," Opt. Lett. 32, 2605-2607 (2007). [CrossRef] [PubMed]
- O. G. Okhotnikov and J. M. Sousa, "Flared single-transverse-mode fiber amplifier," Electron. Lett. 35, 1011-1013, (1999). [CrossRef]
- A. Liem, J. Limpert, H. Zellmer, and A. Tunnermann, "100-W single-frequency master-oscillator fiber power amplifier," Opt. Lett. 28, 1537-1539, (2003). [CrossRef] [PubMed]
- Y. Jeong, J. Nilsson, J. Sahu, D. Payne, R. Horley, L. Hickey, and P. Turner, "Power scaling of single-frequency ytterbium-doped fiber master-oscillator power-amplifier sources up to 500W," IEEE J. Sel. Top. Quantum Electron. 13,546-551 (2007). [CrossRef]
- V. I. Kovalev and R. G. Harrison, "Suppression of stimulated Brillouin scattering in high-power single-frequency fiber amplifiers," Opt. Lett. 31, 161-163 (2006). [CrossRef] [PubMed]
- J. Hansryd, F. Dross, M. Westlund, P. A. Andrekson and S. N. Knudsen, "Increase of the SBS threshold in a short highly nonlinear fiber by applying a temperature distribution," J. Lightwave Technol. 19,1691-1697 (2001). [CrossRef]
- K. Shiraki, M. Ohashi, and M. Tateda, "Suppression of stimulated Brillouin scattering in a fiber by changing the core radius," Electron. Lett. 31, 668-669 (1995). [CrossRef]
- http://www.laserline.de/
Cited By |
OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.
Figures
|
|
|
|
| Fig. 1. | Fig. 2. | Fig. 3. |
|
|
|
|
| Fig. 4. | Fig. 5. | Fig. 6. |
|
|
|
|
| Fig. 7. | Fig. 8. | Fig. 9. |
|
|
|
|
| Fig. 10. | Fig. 11. | Fig. 12. |





OSA is a member of 