OSA's Digital Library

Energy Express

Energy Express

  • Editor: C. Martijn de Sterke
  • Vol. 19, Iss. S6 — Nov. 7, 2011
  • pp: A1250–A1264

Top-emitting organic light-emitting diodes

Simone Hofmann, Michael Thomschke, Björn Lüssem, and Karl Leo  »View Author Affiliations


Optics Express, Vol. 19, Issue S6, pp. A1250-A1264 (2011)
http://dx.doi.org/10.1364/OE.19.0A1250


View Full Text Article

Enhanced HTML    Acrobat PDF (2373 KB)





Browse Journals / Lookup Meetings

Browse by Journal and Year


   


Lookup Conference Papers

Close Browse Journals / Lookup Meetings

Article Tools

Share
Citations

Abstract

We review top-emitting organic light-emitting diodes (OLEDs), which are beneficial for lighting and display applications, where nontransparent substrates are used. The optical effects of the microcavity structure as well as the loss mechanisms are discussed. Outcoupling techniques and the work on white top-emitting OLEDs are summarized. We discuss the power dissipation spectra for a monochrome and a white top-emitting OLED and give quantitative reports on the loss channels. Furthermore, the development of inverted top-emitting OLEDs is described.

© 2011 OSA

OCIS Codes
(160.4890) Materials : Organic materials
(220.0220) Optical design and fabrication : Optical design and fabrication
(230.3670) Optical devices : Light-emitting diodes
(250.0250) Optoelectronics : Optoelectronics
(310.6860) Thin films : Thin films, optical properties
(310.6845) Thin films : Thin film devices and applications

ToC Category:
Light-Emitting Diodes

History
Original Manuscript: August 1, 2011
Manuscript Accepted: October 8, 2011
Published: November 7, 2011

Virtual Issues
Organic Light-Emitting Diodes (2011) Optics Express

Citation
Simone Hofmann, Michael Thomschke, Björn Lüssem, and Karl Leo, "Top-emitting organic light-emitting diodes," Opt. Express 19, A1250-A1264 (2011)
http://www.opticsinfobase.org/oe/abstract.cfm?URI=oe-19-S6-A1250


Sort:  Author  |  Year  |  Journal  |  Reset  

References

  1. C. W. Tang and S. A. VanSlyke, “Organic electroluminescent diodes,” Appl. Phys. Lett.51(12), 913–915 (1987). [CrossRef]
  2. J.-S. Yoo, S.-H. Jung, Y.-C. Kim, S.-C. Byun, J.-M. Kim, N.-B. Choi, S.-Y. Yoon, C.-D. Kim, Y.-K. Hwang, and I.-J. Chung, “Highly Flexible AM-OLED Display With Integrated Gate Driver Using Amorphous Silicon TFT on Ultrathin Metal Foil,” J. Disp. Tech.6, 565–570 (2010). [CrossRef]
  3. S.-K. Hong, J.-H. Sim, I.-G. Seo, K.-C. Kim, S.-I. Bae, H.-Y. Lee, N.-Y. Lee, and J. Jang, “New Pixel Design on Emitting Area for High Resolution Active-Matrix Organic Light-Emitting Diode Displays,” J. Disp. Tech.6, 601–606 (2010). [CrossRef]
  4. J. Blochwitz, M. Pfeiffer, T. Fritz, and K. Leo, “Low voltage organic light emitting diodes featuring doped ph-thalocyanine as hole transport material,” Appl. Phys. Lett.73(6), 729 (1998). [CrossRef]
  5. L. H. Smith, J. a E. Wasey, and W. L. Barnes, “Light outcoupling efficiency of top-emitting organic light-emitting diodes,” Appl. Phys. Lett.84, 2986 (2004). [CrossRef]
  6. R. Meerheim, M. Furno, S. Hofmann, B. Lüssem, and K. Leo, “Quantification of energy loss mechanisms in organic light-emitting diodes,” Appl. Phys. Lett.97, 253305 (2010). [CrossRef]
  7. C. J. Lee, R. B. Pode, D. G. Moon, J. I. Han, N. H. Park, S. H. Baik, and S. S. Ju, “On the problem of microcavity effects on the top emitting OLED with semitransparent metal cathode,” Phys. Stat. Sol.201, 1022–1028 (2004). [CrossRef]
  8. G. E. Jabbour, B. Kippelen, N. R. Armstrong, and N. Peyghambarian, “Aluminum based cathode structure for enhanced electron injection in electroluminescent organic devices,” Appl. Phys. Lett.73, 1185 (1998). [CrossRef]
  9. L. S. Hung, C. W. Tang, M. G. Mason, P. Raychaudhuri, and J. Madathil, “Application of an ultrathin LiF/Al bilayer in organic surface-emitting diodes,” Appl. Phys. Lett.78, 544 (2001). [CrossRef]
  10. C.-W. Chen, P.-Y. Hsieh, H.-H. Chiang, C.-L. Lin, H.-M. Wu, and C.-C. Wu, “Top-emitting organic light-emitting devices using surface-modified Ag anode,” Appl. Phys. Lett.83, 5127 (2003). [CrossRef]
  11. S. Chen, R. Song, J. Wang, Z. Zhao, Z. Jie, Y. Zhao, B. Quan, W. Huang, and S. Liu, “Improved performances in top-emitting organic light-emitting diodes based on a semiconductor zinc oxide buffer layer,” J. Luminescen.128, 1143–1147 (2008). [CrossRef]
  12. X. Zhu, J. Sun, X. Yu, M. Wong, and H.-S. Kwok, “Investigation of Al- and Ag-Based Top-Emitting Organic Light-Emitting Diodes with Metal Oxides as Hole-Injection Layer,” Jap. J. Appl. Phys.46, 1033–1036 (2007). [CrossRef]
  13. C.-C. Wu, C.-L. Lin, P.-Y. Hsieh, and H.-H. Chiang, “Methodology for optimizing viewing characteristics of top-emitting organic light-emitting devices,” Appl. Phys. Lett.84, 3966 (2004). [CrossRef]
  14. V. Bulović, G. Gu, P. E. Burrows, S. R. Forrest, and M. E. Thompson, “Transparent light-emitting devices,” Nature380, 6569 (1996). [CrossRef]
  15. L.-S. Hung and J. Madathilb, “Radiation damage and transmission enhancement in surface-emitting organic light-emitting diodes,” Thin Solid Films410, 101–106 (2002). [CrossRef]
  16. C.-H. Chung, Y.-W. Ko, Y.-H. Kim, C.-Y. Sohn, H. Y. Chu, and J. H. Lee, “Improvement in performance of transparent organic light-emitting diodes with increasing sputtering power in the deposition of indium tin oxide cathode,” Appl. Phys. Lett.86, 093504 (2005). [CrossRef]
  17. H.-K. Kim, K.-S. Lee, and J. H. Kwon, “Transparent indium zinc oxide top cathode prepared by plasma damage-free sputtering for top-emitting organic light-emitting diodes,” Appl. Phys. Lett.88, 012103 (2006). [CrossRef]
  18. S. Han, X. Feng, Z. H. Lu, D. Johnson, and R. Wood, “Transparent-cathode for top-emission organic light-emitting diodes,” Appl. Phys. Lett.82, 2715 (2003). [CrossRef]
  19. G. Parthasarathy, P. E. Burrows, V. Khalfin, V. G. Kozlov, and S. R. Forrest, “A metal-free cathode for organic semiconductor devices,” Appl. Phys. Lett.72, 2138 (1998). [CrossRef]
  20. G. Parthasarathy, C. Adachi, P. E. Burrows, and S. R. Forrest, “High-efficiency transparent organic light-emitting devices,” Appl. Phys. Lett.76, 2128 (2000). [CrossRef]
  21. A. Yamamori, S. Hayashi, T. Koyama, and Y. Taniguchi, “Transparent organic light-emitting diodes using metal acethylacetonate complexes as an electron injective buffer layer,” Appl. Phys. Lett.78, 3343 (2001). [CrossRef]
  22. H. Riel, S. Karg, T. Beierlein, B. Ruhstaller, and W. Rieß, “Phosphorescent top-emitting organic light-emitting devices with improved light outcoupling,” Appl. Phys. Lett.82, 466 (2003). [CrossRef]
  23. Q. Huang, K. Walzer, M. Pfeiffer, V. Lyssenko, G. He, and K. Leo, “Highly efficient top emitting organic light-emitting diodes with organic outcoupling enhancement layers,” Appl. Phys. Lett.88, (2006). [CrossRef]
  24. H. Riel, S. Karg, T. Beierlein, W. Rieß, and K. Neyts, “Tuning the emission characteristics of top-emitting organic light-emitting devices by means of a dielectric capping layer: An experimental and theoretical study,” J. Appl. Phys.94, 5290 (2003). [CrossRef]
  25. S. Hofmann, M. Thomschke, P. Freitag, M. Furno, B. Lüssem, and K. Leo, “Top-emitting organic light-emitting diodes: Influence of cavity design,” Appl. Phys. Lett.97, 253308 (2010). [CrossRef]
  26. E. F. Schubert, N. E. J. Hunt, R. J. Malik, D. L. Sivco, A. Y. Cho, and G. J. Zydzik, “Highly Efficient Light-Emitting Diodes with Microcavities,” Science265, 12 (1994). [CrossRef]
  27. D. G. Deppe, C. Lei, C. C. Lin, and D. L. Huffaker, “Spontaneous Emission from Planar Microstructures,” J. Mod. Opt.41, 325 (1994). [CrossRef]
  28. J.-H. Lee, K.-Y. Chen, C.-C. Hsiao, H.-C. Chen, C.-H. Chang, Y.-W. Kiang, and C. C. Yang, “Radiation Simulations of Top-Emitting Organic Light-Emitting Devices With Two- and Three-Microcavity Structures,” J. Disp. Tech.2, 130 (2006). [CrossRef]
  29. Q. Wang, Z. Deng, and D. Ma, “Realization of high efficiency microcavity top-emitting organic light-emitting diodes with highly saturated colors and negligible angular dependence,” Appl. Phys. Lett.94, 233306 (2009). [CrossRef]
  30. A.W. Lu and A.D. Rakić, “Design of microcavity organic light emitting diodes with optimized electrical and optical performance,” Appl. Opt.48, 2282 (2009). [CrossRef] [PubMed]
  31. A. B. Djurišić and A. D. Rakić, “Organic microcavity light-emitting diodes with metal mirrors: dependence of the emission wavelength on the viewing angle.,” Appl. Opt.41, 7650 (2002). [CrossRef]
  32. X. Zhu, J. Sun, X. Yu, M. Wong, and H.-S. Kwok, “High-Performance Top-Emitting White Organic Light-Emitting Devices,” Jap. J. Appl. Phys.46, 4054–4058 (2007). [CrossRef]
  33. X. W. Chen, W. C. H. Choy, S. He, and P. Chui, “Comprehensive analysis and optimal design of top-emitting organic light-emitting devices,” J. Appl. Phys.101, 113107 (2007). [CrossRef]
  34. D.-S. Leem, S.-Y. Kim, J.-H. Lee, and J.-J. Kim, “High efficiency p-i-n top-emitting organic light-emitting diodes with a nearly Lambertian emission pattern,” J. Appl. Phys.106, 063114 (2009). [CrossRef]
  35. T. W. Canzler, S. Murano, D. Pavicic, O. Fadhel, C. Rothe, A. Haldi, M. Hofmann, and Q. Huang, “Efficiency Enhancement in White PIN OLEDs by Simple Internal Outcoupling Methods,” SID Digest11, 975–978 (2011). [CrossRef]
  36. C. J. Yang, S. H. Liu, H. H. Hsieh, C. C. Liu, T. Y. Cho, and C. C. Wu, “Microcavity top-emitting organic light-emitting devices integrated with microlens arrays: Simultaneous enhancement of quantum efficiency, cd/A efficiency, color performances, and image resolution,” Appl. Phys. Lett.91, 253508 (2007). [CrossRef]
  37. W. L. Barnes, “Fluorescence near interfaces: the role of photonic mode density,” J. of Mod. Opt.45, 661–699 (1998). [CrossRef]
  38. M. Furno, R. Meerheim, M. Thomschke, S. Hofmann, B. Lüssem, and K. Leo, “Outcoupling efficiency in small-molecule OLEDs: from theory to experiment,” Proc. SPIE7617, 761716 (2010). [CrossRef]
  39. K. G. Sullivan and D. G. Hall, “Enhancement and inhibition of electromagnetic radiation in plane-layered media. I.Plane-wave spectrum approach to modeling classical effects,” J. Opt. Soc. Am. B14, 1149 (1997). [CrossRef]
  40. C. Adachi, M. Baldo, M. E. Thompson, and S. R. Forrest, “Nearly 100% internal phosphorescence efficiency in an organic light-emitting device,” J. Appl. Phys.90, 5048 (2001). [CrossRef]
  41. H. Kanno, Y. Sun, and S. R. Forrest, “High-efficiency top-emissive white-light-emitting organic electrophosphorescent devices,” Appl. Phys. Lett.86, 263502 (2005). [CrossRef]
  42. C.-C. Liu, S.-H. Liu, K.-C. Tien, M.-H. Hsu, H.-W. Chang, C.-K. Chang, C.-J. Yang, and C.-C. Wu, “Microcavity top-emitting organic light-emitting devices integrated with diffusers for simultaneous enhancement of efficiencies and viewing characteristics,” Appl. Phys. Lett.94, 103302 (2009). [CrossRef]
  43. L. Smith and W. Barnes, “Using a low-index host layer to increase emission from organic light-emitting diode structures,” Org. Electron.7, 490 (2006). [CrossRef]
  44. S. Wedge, A. Giannattasio, and W. Barnes, “Surface plasmon–polariton mediated emission of light from top-emitting organic light-emitting diode type structures,” Org. Electron.8, 136–147 (2007). [CrossRef]
  45. J. Feng, T. Okamoto, and S. Kawata, “Highly directional emission via coupled surface-plasmon tunneling from electroluminescence in organic light-emitting devices,” Appl. Phys. Lett.87, 241109 (2005). [CrossRef]
  46. Q. Wang, Z. Deng, and D. Ma, “Highly efficient inverted top-emitting organic light-emitting diodes using a lead monoxide electron injection layer,” Opt. Express17, 17269–17278 (2009). [CrossRef] [PubMed]
  47. K. H. An, M. Shtein, and K. P. Pipe, “Surface plasmon mediated energy transfer of electrically-pumped excitons,” Opt. Express18, 4041 (2010). [CrossRef] [PubMed]
  48. K. C. Tien, M. S. Lin, Y. H. Lin, C.-H. Tsai, M. H. Shiu, M. C. Wei, H. C. Cheng, C. L. Lin, H. W. Lin, and C. C. Wu, “Utilizing surface plasmon polariton mediated energy transfer for tunable double-emitting organic light-emitting devices,” Org. Electron.11, 397–406 (2010). [CrossRef]
  49. J. Frischeisen, D. Yokoyama, A. Endo, C. Adachi, and W. Brütting, “Increased light outcoupling efficiency in dye-doped small molecule organic light-emitting diodes with horizontally oriented emitters,” Org. Electron.12, 817 (2011). [CrossRef]
  50. P. Freitag, S. Reineke, S. Olthof, M. Furno, B. Lüssem, and K. Leo, “White top-emitting organic light-emitting diodes with forward directed emission and high color quality,” Org. Electronics11, 1676–1682 (2010). [CrossRef]
  51. M. Thomschke, R. Nitsche, M. Furno, and K. Leo, “Optimized efficiency and angular emission characteristics of white top-emitting organic electroluminescent diodes,” Appl. Phys. Lett94, 083303 (2009). [CrossRef]
  52. T. Feng, T. A. Ali, E. S. Ramakrshnan, R. Campos, and W. E. Howard, “Structure and characterization of a white up-emitting OLED on silicon for microdisplays,” Proc. SPIE4105, 30–36 (2001). [CrossRef]
  53. S.-F. Hsu, C.-C. Lee, S.-W. Hwang, and C. H. Chen, “Highly efficient top-emitting white organic electroluminescent devices,” Appl. Phys. Lett.86, 253508 (2005). [CrossRef]
  54. S.-J. Lin, H.-Y. Ueng, and F.-S. Juang, “Effects of Thickness of Organic and Multilayer Anode on Luminance Efficiency in Top-Emission Organic Light Emitting Diodes,” Jap. J. Appl.Phys.45, 3717–3720 (2006). [CrossRef]
  55. M. Lee and M. Tseng, “Efficient, long-life and Lambertian source of top-emitting white OLEDs using low-reflectivity molybdenum anode and co-doping technology,” Curr. Appl. Phys.8, 616–619 (2008). [CrossRef]
  56. W. Ji, L. Zhang, R. Gao, L. Zhang, W. Xie, H. Zhang, and B. Li, “Top-emitting white organic light-emitting devices with down-conversion phosphors: theory and experiment,” Opt. Express16, 15489–94 (2008). [CrossRef] [PubMed]
  57. Q. Wang, Z. Deng, J. Chen, and D. Ma, “Realization of blue, green, and white inverted microcavity top-emitting organic light-emitting devices based on the same emitting layer,” Opt. Lett.35, 462–464 (2010). [CrossRef] [PubMed]
  58. G. Xie, Z. Zhang, Q. Xue, S. Zhang, L. Zhao, Y. Luo, P. Chen, B. Quan, Y. Zhao, and S. Liu, “Highly efficient top-emitting white organic light-emitting diodes with improved contrast and reduced angular dependence for active matrix displays,” Org. Electron.11, 2055–2059 (2010). [CrossRef]
  59. S. Chen and H.-S. Kwok, “Top-emitting white organic light-emitting diodes with a color conversion cap layer,” Org. Electron.12, 677–681 (2011). [CrossRef]
  60. “ENERGY STAR ® Program Requirements for Solid State Lighting Luminaires Eligibility Criteria – Version 1.1,” 1–23 (2008) http://www.energystar.gov .
  61. W. Ji, J. Zhao, Z. Sun, and W. Xie, “High-color-rendering flexible top-emitting warm-white organic light emitting diode with a transparent multilayer cathode,” Org. Electron.12, 1137–1141 (2011). [CrossRef]
  62. J. Ma, X. Piao, J. Liu, L. Zhang, T. Zhang, M. Liu, T. Li, W. Xie, and H. Cui, “Optical simulation and optimization of ITO-free top-emitting white organic light-emitting devices for lighting or display,” Org. Electron.12, 923–935 (2011). [CrossRef]
  63. S. Pimputkar, J. S. Speck, S. P. DenBaars, and S. Nakamura, “Prospects for LED lighting,” Nature Photonics3, 180–182 (2009). [CrossRef]
  64. S. Reineke, F. Lindner, G. Schwartz, N. Seidler, K. Walzer, B. Lüssem, and K. Leo, “White organic light-emitting diodes with fluorescent tube efficiency,” Nature459, 234 (2009). [CrossRef] [PubMed]
  65. P. Freitag, S. Hofmann, M. Furno, T. C. Rosenow, B. Lüssem, S. Reineke, S. Mogck, T. Wanski, C. May, and K. Leo, “Novel Approaches for OLED Lighting,” SID Digest11, (2011).
  66. S. Chen, L. Deng, J. Xie, L. Peng, L. Xie, Q. Fan, and W. Huang, “Recent Developments in Top-Emitting Organic Light-Emitting Diodes,” Adv. Mater.22, 5227–5239 (2010). [CrossRef] [PubMed]
  67. V. Bulović, P. Tian, P. E. Burrows, M. R. Gokhale, S. R. Forrest, and M. E. Thompson, “A surface-emitting vacuum-deposited organic light emitting device,” Appl. Phys. Lett.70, 2954–2954 (1997). [CrossRef]
  68. T. Dobbertin, O. Werner, J. Meyer, A. Kammoun, D. Schneider, T. Riedl, E. Becker, H.-H. Johannes, and W. Kowalsky, “Inverted top-emitting organic light-emitting diodes using sputter-deposited anodes,” Appl. Phys. Lett.82, 284–286 (2003). [CrossRef]
  69. K.-H. Kim, S.-Y. Huh, S.-M. Seo, and H. H. Lee, “Inverted top-emitting organic light-emitting diodes by whole device transfer,” Org. Electr.9, 1118–1121 (2008). [CrossRef]
  70. C.-W. Chen, C.-L. Lin, and C.-C. Wu, “An effective cathode structure for inverted top-emitting organic light-emitting devices,” Appl. Phys. Lett.85, 2469–2471 (2004). [CrossRef]
  71. W. Song, S. K. So, J. Moulder, Y. Qiu, Y. Zhu, and L. Cao, “Study on the interaction between Ag and tris(8-hydroxyquinoline) aluminum using x-ray photoelectron spectroscopy,” Surf. Interface Anal.32, 70–73 (2001). [CrossRef]
  72. S. Scholz, Q. Huang, M. Thomschke, S. Olthof, P. Sebastian, K. Walzer, K. Leo, S. Oswald, C. Corten, and D. Kuckling, “Self-doping and partial oxidation of metal-on-organic interfaces for organic semiconductor devices studied by chemical analysis techniques,” J. Appl. Phys.104, 104502 (2008). [CrossRef]
  73. H. Lee, I. Park, J. Kwak, D. Y. Yoon, and C. Lee, “Improvement of electron injection in inverted bottom-emission blue phosphorescent organic light emitting diodes using zinc oxide nanoparticles,” Appl. Phys. Lett.96, 153306 (2010). [CrossRef]
  74. C. Yun, H. Cho, H. Kang, Y. Mi Lee, Y. Park, and S. Yoo, “Electron injection via pentacene thin films for efficient inverted organic light-emitting diodes,” Appl. Phys. Lett.95, 053301 (2009). [CrossRef]
  75. X. Zhou, M. Pfeiffer, J. S. Huang, J. Blochwitz-Nimoth, D. S. Qin, A. Werner, J. Drechsel, B. Maennig, and K. Leo, “Low-voltage inverted transparent vacuum deposited organic light-emitting diodes using electrical doping,” Appl. Phys. Lett.81, 922–924 (2002). [CrossRef]
  76. H. W. Choi, S. Y. Kim, W.-K. Kim, and J.-L. Lee, “Enhancement of electron injection in inverted top-emitting organic light-emitting diodes using an insulating magnesium oxide buffer layer,” Appl. Phys. Lett.87, 082102 (2005). [CrossRef]
  77. J. Meyer, T. Winkler, S. Hamwi, S. Schmale, H. H. Johannes, T. Weimann, P. Hinze, W. Kowalsky, and T. Riedl, “Transparent Inverted Organic Light-Emitting Diodes with a Tungsten Oxide Buffer Layer,” Adv. Mater.20, 3839–3843 (2008). [CrossRef]
  78. K. Hong, K. Kim, and J.-L. Lee, “Enhancement of electrical property by oxygen doping to copper phthalocyanine in inverted top emitting organic light emitting diodes,” Appl. Phys. Lett.95, 213307 (2009). [CrossRef]
  79. M. Pfeiffer, S. R. Forrest, X. Zhou, and K. Leo, “A low drive voltage, transparent, metal-free n-i-p electrophosphorescent light emitting diode,” Org. Electr.4, 21–26 (2003). [CrossRef]
  80. M. Thomschke, S. Hofmann, S. Olthof, M. Anderson, H. Kleemann, M. Schober, B. Lüssem, and K. Leo, “Improvement of voltage and charge balance in inverted top-emitting organic electroluminescent diodes comprising doped transport layers by thermal annealing,” Appl. Phys. Lett.98, 083304 (2011). [CrossRef]
  81. P.-S. Wang, I.-W. Wu, and C.-I. Wu, “Enhancement of current injection in inverted organic light emitting diodes with thermal annealing,” J. Appl. Phys.108, 103714 (2010). [CrossRef]

Cited By

Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.


« Previous Article  |  Next Article »

OSA is a member of CrossRef.

CrossCheck Deposited