|
Bend performance-enhanced photonic crystal fibers with anisotropic numerical aperture: errata |
Optics Express, Vol. 20, Issue 7, pp. 7966-7972 (2012)
http://dx.doi.org/10.1364/OE.20.007966
Enhanced HTML 
Acrobat PDF (1452 KB)
Abstract
An error was made in converting the units of bend radius within the computer program used to obtain the reported results. This caused the calculated values of the bending induced stress to be significantly smaller than their true value. Corrected results for stress within the fiber and bend losses are reported. Since bending-induced stresses cause a relatively small correction to the refractive index profile, these corrections result in no changes in the main conclusions of this work.
© 2012 OSA
OCIS Codes
(060.2280) Fiber optics and optical communications : Fiber design and fabrication
(060.2310) Fiber optics and optical communications : Fiber optics
(060.2320) Fiber optics and optical communications : Fiber optics amplifiers and oscillators
(140.3510) Lasers and laser optics : Lasers, fiber
(230.7370) Optical devices : Waveguides
(060.5295) Fiber optics and optical communications : Photonic crystal fibers
ToC Category:
Photonic Crystal Fibers
History
Original Manuscript: March 19, 2012
Published: March 21, 2012
Citation
Benjamin Ward, "Bend performance-enhanced photonic crystal fibers with anisotropic numerical aperture: errata," Opt. Express 20, 7966-7972 (2012)
http://www.opticsinfobase.org/oe/abstract.cfm?URI=oe-20-7-7966
Sort: Year | Journal | Reset
References
- B. G. Ward, “Bend performance-enhanced photonic crystal fibers with anisotropic numerical aperture,” Opt. Express16(12), 8532–8548 (2008). [CrossRef] [PubMed]
- M. Koshiba and Y. Tsuji, “Curvilinear hybrid edge/nodal elements with triangular shape for guided-wave problems,” J. Lightwave Technol.18(5), 737–743 (2000). [CrossRef]
- B. G. Ward, “Solid-core photonic bandgap fibers for cladding-pumped Raman amplification,” Opt. Express19(12), 11852–11866 (2011). [CrossRef] [PubMed]
Cited By |
 Alert me when this paper is cited |
OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.
Figures
|
|
|
|
| Fig. 1 | Fig. 2 | Fig. 3 |
|
|
|
|
| Fig. 4 | Fig. 5 | Fig. 6 |
|
|
|
|
| Fig. 7 | Fig. 8 | Fig. 9 |
|
|
|
|
| Fig. 10 | Fig. 11 | Fig. 12 |
|
|
||
| Fig. 13 | ||
Related Journal Articles 
- Mode-area scaling of helical-core, dual-clad fiber lasers and amplifiers using an improved bend-loss model (JOSAB)
- Mode scalability in bent optical fibers (OE)
- Bend performance-enhanced photonic crystal fibers with anisotropic numerical aperture (OE)
- Mode-area scaling of helical-core, dual-clad fiber lasers and amplifiers using an improved bend-loss model: erratum (JOSAB)
- High-power very large mode-area thulium-doped fiber laser (OL)
Related Conference Papers
- Robust Single-Mode High Average Power Very Large Mode Area Fiber Amplifiers
- Single-Frequency Photonic Bandgap Fiber Amplification
- Fabrication and Characterization of Ultra-large Core Size (>100μm) Kagome Fiber for Laser Power Handling
- Impact of Draw Inhomogeneitites on the Loss and Mode Content of Large-Mode-Area Fibers
- 53.6 W, 1178 nm Yb-doped Photonic Bandgap Fiber Oscillator
« Previous Article | Next Article »
OSA is a member of 