OSA's Digital Library

Optics Express

Optics Express

  • Editor: Michael Duncan
  • Vol. 13, Iss. 19 — Sep. 19, 2005
  • pp: 7374–7379
« Show journal navigation

A high efficiency input/output coupler for small silicon photonic devices

Goran Z. Masanovic, Graham T. Reed, William Headley, Branislav Timotijevic, Vittorio M. N. Passaro, Raghied Atta, Graham Ensell, and Alan G. R. Evans  »View Author Affiliations


Optics Express, Vol. 13, Issue 19, pp. 7374-7379 (2005)
http://dx.doi.org/10.1364/OPEX.13.007374


View Full Text Article

Acrobat PDF (117 KB)





Browse Journals / Lookup Meetings

Browse by Journal and Year


   


Lookup Conference Papers

Close Browse Journals / Lookup Meetings

Article Tools

Share
Citations

Abstract

Coupling light from an optical fibre to small optical waveguides is particularly problematic in semiconductors, since the refractive index of the silica fibre is very different from that of a semiconductor waveguide. There have been several published methods of achieving such coupling, but none are sufficiently efficient whilst being robust enough for commercial applications. In this paper experimental results of our approach called a Dual-Grating Assisted Directional Coupler, are presented. The principle of coupling by this novel method has been successfully demonstrated, and a coupling efficiency of 55% measured.

© 2005 Optical Society of America

1. Introduction

Silicon Photonics has recently received considerable interest for low cost applications in communications and interconnect, becoming significantly more interesting with the report of a fast silicon modulator [1

1. A. Liu, R. Jones, L. Liao, D. Samara-Rubio, D. Rubin, O. Cohen, R. Nicolaescu, and M. Paniccia, “A highspeed silicon optical modulator based on a metal-oxide-semiconductor capacitor,” Nature 427, 615–618 (2004). [CrossRef] [PubMed]

], optical gain [2

2. A. Liu, H. Rong, M. Paniccia, O. Cohen, and D. Hak, “Net optical gain in a low loss silicon-on-insulator waveguide by stimulated Raman scattering,” Opt. Express 12, 4261–4267 (2004), http://www.opticsexpress.org/abstract.cfm?URI=OPEX-12-18-4261. [CrossRef] [PubMed]

,3

3. O. Boyraz and B. Jalali, “Demonstration of 11dB fiber-to-fiber gain in a silicon Raman amplifier,” IEICE Elect. Express 1, 429–434 (2004). [CrossRef]

] and silicon lasers [4

4. O. Boyraz and B. Jalali, “Demonstration of a silicon Raman laser,” Opt. Express 12, 5269–5273 (2004),http://www.opticsexpress.org/abstract.cfm?URI=OPEX-12-21-5269. [CrossRef] [PubMed]

,5

5. H. Rong, R. Jones, A. Liu, O. Cohen, D. Hak, A. Fang, and M. Paniccia, “A continuous-wave Raman silicon laser,” Nature 433, 725–728 (2005). [CrossRef] [PubMed]

]. There is also a trend to reduce the dimensions of silicon devices to improve the packing density [6

6. V. R. Almeida, C. A. Barrios, R. R. Panepucci, and M. Lipson, “All-optical control of light on a silicon chip,” Nature 431, 1081–1084 (2004). [CrossRef] [PubMed]

], and to enhance the performance of silicon photonic circuits [7

7. C. E. Png, S. P. Chan, S. T. Lim, and G. T. Reed, “Optical phase modulators for MHz and GHz modulation in silicon-on-insulator (SOI),” J. Lightwave Technol. 22, 1573–82 (2004). [CrossRef]

]. Cross sectional dimensions of silicon waveguide-based devices reported recently are ~ 1 μm or less. Whilst this reduction enhances the performance of the photonic circuit, it makes coupling of light to/from the circuit very difficult, particularly to/from standard optical fibres that typically have a core dimension of ~ 9 μm. Consequently several devices have been proposed for efficient coupling to/from the silicon photonic circuit [8–12

8. J. J. Fijol, E. E. Fike, P. B. Keating, D. Gilbody, J. J. LeBlanc, S. A. Jacobson, W. J. Kessler, and M. B. Frish, “Fabrication of silicon-on-insulator adiabatic tapers for low-loss optical interconnection of photonic devices,” in Photonics Packaging and Integration III, R. A. Heyler, D. J. Robbins, and G. E. Jabbour, eds., Proc. SPIE 4997, 157–170 (2003). [CrossRef]

] but none have yet produced satisfactory performance. We have previously presented theoretical work of an alternative device entitled the Dual Grating Assisted Directional Coupler (DGADC) [13

13. G. Z. Masanovic, V. M. N. Passaro, and G. T. Reed, “Dual grating-assisted directional coupling between fibres and thin semiconductor waveguides,” IEEE Photonics Technol. Lett. 15, 1395–1397 (2003). [CrossRef]

,14

14. G. Z. Masanovic, V. M. N. Passaro, and G. T. Reed, “Coupling to nanophotonic waveguides using a dual grating-assisted directional coupler,” IEE Proc. Optoelectron. 152, 41–48 (2005). [CrossRef]

] that predicted efficiencies as high as 97%. Whilst this was very promising, other methods also have high efficiencies in theory. It is when these devices are measured experimentally that they fail to fulfill their promise. Here we present experimental results of the DGADC, and we show that the experimental coupling efficiency is within a few percent of the theoretical value.

In reference [15

15. S. J. McNab, N. Moll, and Y. A. Vlasov, ”Ultra-low loss photonic integrated circuit with membrane-type photonic crystal waveguides,” Opt. Express 11, 2927–2939 (2003), http://www.opticsexpress.org/abstract.cfm?URI=OPEX-11-22-2927. [CrossRef] [PubMed]

], which reports a loss of 0.5 dB per interface, the total insertion loss was measured, and the waveguide loss subtracted, leaving the coupling loss. However, the waveguide loss was measured by a rather inaccurate technique, the authors quoting an uncertainty of +70%, although the data suggests perhaps even more. Furthermore, subtraction of waveguide loss implies removal of scattering loss, which is compounded in the taper section. Taking these issues together, this means that the quoted loss of 0.5 dB per interface could easily be substantially higher, but the accuracy of the data makes it impossible to say definitively.

Another promising approach for coupling to ~ 1/4 μm silicon waveguide is the inverted prism [12

12. Z. Lu and D. W. Prather, “TIR-Evanescent coupler for fiber to waveguide integration of planar optoelectronic devices,” Opt. Lett. 29, 1784–1750 (2004). [CrossRef]

] producing an experimental efficiency of 45% as compared to 87% theoretically, but this requires external affixing of the prism to the waveguide.

To date, very few investigations have considered grating-based solutions for the problem. Prior to our work the most successful paper on grating-assisted coupling between a large glass waveguide and a thin semiconductor waveguide was that of Butler et al. [16

16. J. K. Butler, N.-H. Sun, G. A. Evans, L. Pang, and P. Congdon, “Grating-assisted coupling of light between semiconductor and glass waveguides,” J. Lightwave Technol. 16, 1038–1048 (1998). [CrossRef]

], in which the maximum theoretical coupling efficiency for TE polarisation, was only 40% for optimised waveguide and grating parameters. For a change in the grating period of just 0.3 nm, the coupling efficiency dropped to only 20%, making the fabrication of this device impractical for commercial applications. Recently, experimental coupling efficiency of 50% has been reported using an AntiResonant Reflection Optical Waveguide (ARROW) incorporating a grating-assisted optical coupler [17

17. R. Orobtchouk, N. Schnell, T. Benyattou, J. Gregoire, S. Lardenois, M. Heitzmann, and J. M. Fedeli, “New ARROW optical coupler for optical interconnect,” in Proceedings of IEEE International Conference on Interconnect Technology (2003), pp 233–235.

]. However, the waveguide dimensions presented were 3 μm and 0.3 μm respectively for a wavelength of 1.3 μm, all much more restricted than presented here. Generally, the main disadvantages of grating-assisted couplers are relatively narrow bandwidth and significant polarisation dependence. We have already proposed a polarisation independent device [14

14. G. Z. Masanovic, V. M. N. Passaro, and G. T. Reed, “Coupling to nanophotonic waveguides using a dual grating-assisted directional coupler,” IEE Proc. Optoelectron. 152, 41–48 (2005). [CrossRef]

] and work is underway to broaden spectrum of the device.

2. Dual Grating-Assisted Directional Coupling

We have developed the Dual Grating-Assisted Directional Coupler (DGADC) [13

13. G. Z. Masanovic, V. M. N. Passaro, and G. T. Reed, “Dual grating-assisted directional coupling between fibres and thin semiconductor waveguides,” IEEE Photonics Technol. Lett. 15, 1395–1397 (2003). [CrossRef]

,14

14. G. Z. Masanovic, V. M. N. Passaro, and G. T. Reed, “Coupling to nanophotonic waveguides using a dual grating-assisted directional coupler,” IEE Proc. Optoelectron. 152, 41–48 (2005). [CrossRef]

] that offers highly efficient coupling between a fibre and a thin Silicon on Insulator (SOI) waveguide. A schematic of an example design is shown in Fig. 1. The top layer is 5 μm thick with refractive index close to the refractive index of optical fibre, resulting in insertion loss ≤ 0.05 dB from the fibre to this waveguide. Therefore a fibre could be butt coupled to the thick SiON waveguide and subsequently the light coupled to the Si3N4 waveguide using the first grating, and to the thin SOI waveguide via the second grating. The silicon nitride waveguide is crucial for the operation of the device, because it enables highly efficient coupling at both gratings, consequently forming an efficient DGADC. This waveguide bridges the gap between SiON and Si layers in both refractive index and thickness. The buried oxide layer serves as the lower cladding layer, for isolation from the substrate, hence removing any leakage loss.

We have analysed the design in Fig. 1 using the Transfer Matrix Method (TMM) [18

18. W. Huang and J. Hong, “Transfer matrix approach based on local normal modes for coupled waveguides with periodic perturbation,” J. Lightwave Technol. 10, 1367–1375 (1992). [CrossRef]

] and Floquet-Bloch Theory (FBT) [19

19. V. M. N. Passaro, “Optimal Design of grating-assisted directional couplers,” J. Lightwave Technol. 18, 973–984 (2000). [CrossRef]

] to ensure accuracy. For shallow gratings (≈ 20 nm) such as those in our design, both methods agree well. It has been shown [14

14. G. Z. Masanovic, V. M. N. Passaro, and G. T. Reed, “Coupling to nanophotonic waveguides using a dual grating-assisted directional coupler,” IEE Proc. Optoelectron. 152, 41–48 (2005). [CrossRef]

] that for the following design parameters: surface SiON waveguide thickness = 5 μm, refractive index = 1.478; upper SiON layer thickness = 0.15 μm, refractive index = 1.467; Si3N4 waveguide thickness = 0.5 μm, refractive index = 1.97; lower SiON layer thickness = 0.2 μm, refractive index = 1.467; silicon waveguide thickness = 230 nm, refractive index = 3.476, maximum coupling efficiency can reach ~93%. Whilst this is very encouraging, other approaches have also resulted in high theoretical efficiency but have produced inferior experimental results. Hence we have attempted to fabricate the device in Fig. 1 and measure it experimentally.

Fig. 1. Dual grating-assisted directional coupler in SOI [13]

3. Fabrication and experimental results

Unibond four inch wafers with 3 μm buried oxide layer and a 230 nm silicon overlayer were used for the fabrication of our devices. Both ‘single’ (Fig. 1) and ‘double” DGADCs (Fig. 2) were fabricated. Obviously, the former was less convenient for measurement of the coupling efficiency than the latter because of a highly divergent beam coming out from the thin silicon waveguide. ICP etching was used to define the silicon waveguide. Gratings with a period of 1.3 – 1.4 μm and 10 nm height were then patterned by plasma etching on the top of this waveguide. Plasma Enhanced Chemical Vapour Deposition (PECVD) was used for the fabrication of SiON layers. The films were deposited at 300°C with varying flow of nitrous oxide, and constant flows of 50 sccm (standard cubic centimeters) of ammonia and 155 sccm of 5% silane in nitrogen. Silane and ammonia were used as reactants for the Si3N4 deposition process; ammonia instead of nitrogen was chosen as a reactant gas because it provides better thickness and refractive index uniformity [20

20. V. S. Nguyen, S. Burton, and P. Pan, “The variation of physical properties of plasma-deposited silicon nitride and oxynitride with their compositions,” J. Electrochem. Soc. 131, 2348–2353 (1984). [CrossRef]

]. The pressure was 0.5 Torr, and silane gas flow five times as large as that in the SiON deposition. The grating on this layer has a larger period (≈ 5 μm) and height of 20 nm. The top three layers were then etched in CHF3 plasma down to the second gap layer.

Figure 3 shows a typical scanning electron micrograph of the resultant device. The most striking thing about the figure is that the total height of SiON and Si3N4 layers is 4.4 μm instead of 6 μm which means that the surface SiON waveguide has been significantly over-etched and is only up to 3.8 μm in height, as opposed to 5μm in the design of Fig. 1. The width of the waveguides is also reduced to 8–9 μm compared to 10 μm which has been used in the design. Wider waveguides have been chosen to minimize scattering caused by the side-wall roughness, similarly to [9

9. A. Sure, T. Dillon, J. Murakowski, C. Lin, D. Pustai, and D. W. Prather, “Fabrication and characterization of three-dimensional silicon tapers,” Opt. Express 11, 3555–3561 (2003), http://www.opticsexpress.org/abstract.cfm?URI=OPEX-11-26-3555. [CrossRef] [PubMed]

]. Therefore we have recalculated the efficiency of the device as fabricated, and whilst the generic behaviour of the device remains the same, the maximum theoretical efficiency falls from 93% in the original design to 60% for the device as fabricated.

We have measured the efficiency of the device experimentally by fabricating the test structure in Fig. 2, which we refer to as the ‘double DGADC’ configuration. This enables light to be coupled into the thin silicon waveguide via the input SiON waveguide, and collected at the output via the output SiON waveguide, and the efficiency of two DGADCs evaluated. We assume that the efficiencies of each DGADC (at input and output) are equal. The efficiency was determined by normalising to the light transmitted through a straight surface SiON waveguide, which is almost identical to the ‘double’ DGADC structure, on the same chip. It is, however, continuous, unlike the ‘double’ DGADC which has an 800 μm long silicon waveguide in the central region, and it does not have gratings so no coupling occurs. This approach was adopted because this excludes the reduced input coupling efficiency to the surface SiON waveguide, due to the over-etched waveguide, but still demonstrates the enhancement due to the DGADC. This approach has been also used extensively by other authors (e.g. in [8

8. J. J. Fijol, E. E. Fike, P. B. Keating, D. Gilbody, J. J. LeBlanc, S. A. Jacobson, W. J. Kessler, and M. B. Frish, “Fabrication of silicon-on-insulator adiabatic tapers for low-loss optical interconnection of photonic devices,” in Photonics Packaging and Integration III, R. A. Heyler, D. J. Robbins, and G. E. Jabbour, eds., Proc. SPIE 4997, 157–170 (2003). [CrossRef]

,9

9. A. Sure, T. Dillon, J. Murakowski, C. Lin, D. Pustai, and D. W. Prather, “Fabrication and characterization of three-dimensional silicon tapers,” Opt. Express 11, 3555–3561 (2003), http://www.opticsexpress.org/abstract.cfm?URI=OPEX-11-26-3555. [CrossRef] [PubMed]

]). The total coupling loss from a fibre to silicon waveguide comprises the fibre to SiON waveguide loss (~ 0.7 dB) plus SiON to silicon waveguide loss (2.6 dB). However, if the surface SiON waveguide is 5 μm thick, the coupling loss from the fibre to SiON falls to ~ 0.1 dB and we expect the total coupling loss to be ~ 0.8 dB.

Fig. 2. ‘Double’ DGADC configuration.
Fig. 3. Typical SEM micrograph of a fabricated DGADC.

Figure 4 shows a typical experimental spectra of the coupler. It can be seen that the resonant peak is well defined with typical side lobe suppression of 9–15 dB (theoretical value is ~ 14 dB). Higher values of mark to space ratio of the gratings (0.6–0.65) give higher coupling efficiency and bandwidth of ~ 4 nm (Fig. 4). The maximum measured efficiency is 55% (Fig. 5), within 5% of the theoretical value for this coupler design. For different grating periods, the resonant peak can be shifted towards longer or shorter wavelengths still achieving high coupling efficiency (Fig. 5). If the experimental to theoretical coupling efficiency ratio translates pro-rata to our original design, we can expect to achieve a coupling efficiency in excess of 80% (<1 dB loss) per interface for a correctly fabricated device. This makes the DGADC arguably the most promising method of coupling to small silicon waveguides and devices, and is one of the only approaches that achieves an experimental efficiency close to the theoretical value.

Fig. 4. Typical output from a ‘double’ DGADC.
Fig. 5. Coupling efficiency of DGADC can be as high as 55% and resonant peak position can be changed for different grating periods still achieving high efficiency.

4. Conclusion

We have presented experimental results for the DGADC approach. With the coupling efficiency of 55%, the DGADC is the most efficient grating-assisted directional coupling method for coupling to small semiconductor waveguides reported to date. The DGADC has a range of applications. It will be useful in wavelength selective applications such as coarse wavelength division multiplexing (CWDM), or coupling the pump wavelength to recently demonstrated Raman lasers or amplifiers in silicon, or in single wavelength applications such as optical interconnect. It also uses materials that are CMOS compatible and removes the need for anti reflection coatings at the input and output facets. Furthermore, work is underway to broaden the spectrum of the devices by grating chirping and by varying the duty cycle of the gratings.

References and links

1.

A. Liu, R. Jones, L. Liao, D. Samara-Rubio, D. Rubin, O. Cohen, R. Nicolaescu, and M. Paniccia, “A highspeed silicon optical modulator based on a metal-oxide-semiconductor capacitor,” Nature 427, 615–618 (2004). [CrossRef] [PubMed]

2.

A. Liu, H. Rong, M. Paniccia, O. Cohen, and D. Hak, “Net optical gain in a low loss silicon-on-insulator waveguide by stimulated Raman scattering,” Opt. Express 12, 4261–4267 (2004), http://www.opticsexpress.org/abstract.cfm?URI=OPEX-12-18-4261. [CrossRef] [PubMed]

3.

O. Boyraz and B. Jalali, “Demonstration of 11dB fiber-to-fiber gain in a silicon Raman amplifier,” IEICE Elect. Express 1, 429–434 (2004). [CrossRef]

4.

O. Boyraz and B. Jalali, “Demonstration of a silicon Raman laser,” Opt. Express 12, 5269–5273 (2004),http://www.opticsexpress.org/abstract.cfm?URI=OPEX-12-21-5269. [CrossRef] [PubMed]

5.

H. Rong, R. Jones, A. Liu, O. Cohen, D. Hak, A. Fang, and M. Paniccia, “A continuous-wave Raman silicon laser,” Nature 433, 725–728 (2005). [CrossRef] [PubMed]

6.

V. R. Almeida, C. A. Barrios, R. R. Panepucci, and M. Lipson, “All-optical control of light on a silicon chip,” Nature 431, 1081–1084 (2004). [CrossRef] [PubMed]

7.

C. E. Png, S. P. Chan, S. T. Lim, and G. T. Reed, “Optical phase modulators for MHz and GHz modulation in silicon-on-insulator (SOI),” J. Lightwave Technol. 22, 1573–82 (2004). [CrossRef]

8.

J. J. Fijol, E. E. Fike, P. B. Keating, D. Gilbody, J. J. LeBlanc, S. A. Jacobson, W. J. Kessler, and M. B. Frish, “Fabrication of silicon-on-insulator adiabatic tapers for low-loss optical interconnection of photonic devices,” in Photonics Packaging and Integration III, R. A. Heyler, D. J. Robbins, and G. E. Jabbour, eds., Proc. SPIE 4997, 157–170 (2003). [CrossRef]

9.

A. Sure, T. Dillon, J. Murakowski, C. Lin, D. Pustai, and D. W. Prather, “Fabrication and characterization of three-dimensional silicon tapers,” Opt. Express 11, 3555–3561 (2003), http://www.opticsexpress.org/abstract.cfm?URI=OPEX-11-26-3555. [CrossRef] [PubMed]

10.

V. R. Almeida, R. R. Panepucci, and M. Lipson, “Nanotaper for compact mode conversion,” Opt. Lett. 28, 1302–1304 (2003). [CrossRef] [PubMed]

11.

K. Yamada, M. Notomi, I. Yokohama, T. Shoji, T. Tsuchizawa, T. Watanabe, J. Takahashi, E. Tamechika, and H. Morita, “SOI-based photonic crystal line defect waveguides,” in Proc. SPIE 4870, 324–338 (2002). [CrossRef]

12.

Z. Lu and D. W. Prather, “TIR-Evanescent coupler for fiber to waveguide integration of planar optoelectronic devices,” Opt. Lett. 29, 1784–1750 (2004). [CrossRef]

13.

G. Z. Masanovic, V. M. N. Passaro, and G. T. Reed, “Dual grating-assisted directional coupling between fibres and thin semiconductor waveguides,” IEEE Photonics Technol. Lett. 15, 1395–1397 (2003). [CrossRef]

14.

G. Z. Masanovic, V. M. N. Passaro, and G. T. Reed, “Coupling to nanophotonic waveguides using a dual grating-assisted directional coupler,” IEE Proc. Optoelectron. 152, 41–48 (2005). [CrossRef]

15.

S. J. McNab, N. Moll, and Y. A. Vlasov, ”Ultra-low loss photonic integrated circuit with membrane-type photonic crystal waveguides,” Opt. Express 11, 2927–2939 (2003), http://www.opticsexpress.org/abstract.cfm?URI=OPEX-11-22-2927. [CrossRef] [PubMed]

16.

J. K. Butler, N.-H. Sun, G. A. Evans, L. Pang, and P. Congdon, “Grating-assisted coupling of light between semiconductor and glass waveguides,” J. Lightwave Technol. 16, 1038–1048 (1998). [CrossRef]

17.

R. Orobtchouk, N. Schnell, T. Benyattou, J. Gregoire, S. Lardenois, M. Heitzmann, and J. M. Fedeli, “New ARROW optical coupler for optical interconnect,” in Proceedings of IEEE International Conference on Interconnect Technology (2003), pp 233–235.

18.

W. Huang and J. Hong, “Transfer matrix approach based on local normal modes for coupled waveguides with periodic perturbation,” J. Lightwave Technol. 10, 1367–1375 (1992). [CrossRef]

19.

V. M. N. Passaro, “Optimal Design of grating-assisted directional couplers,” J. Lightwave Technol. 18, 973–984 (2000). [CrossRef]

20.

V. S. Nguyen, S. Burton, and P. Pan, “The variation of physical properties of plasma-deposited silicon nitride and oxynitride with their compositions,” J. Electrochem. Soc. 131, 2348–2353 (1984). [CrossRef]

OCIS Codes
(050.2770) Diffraction and gratings : Gratings
(060.1810) Fiber optics and optical communications : Buffers, couplers, routers, switches, and multiplexers

ToC Category:
Research Papers

History
Original Manuscript: June 15, 2005
Revised Manuscript: August 31, 2005
Published: September 19, 2005

Citation
Goran Masanovic, Graham Reed, William Headley, Branislav Timotijevic, Vittorio Passaro, Raghied Atta, Graham Ensell, and Alan Evans, "A high efficiency input/output coupler for small silicon photonic devices," Opt. Express 13, 7374-7379 (2005)
http://www.opticsinfobase.org/oe/abstract.cfm?URI=oe-13-19-7374


Sort:  Journal  |  Reset  

References

  1. A. Liu, R. Jones, L. Liao, D. Samara-Rubio, D. Rubin, O. Cohen, R. Nicolaescu, and M. Paniccia, �??A high-speed silicon optical modulator based on a metal-oxide-semiconductor capacitor,�?? Nature 427, 615-618 (2004). [CrossRef] [PubMed]
  2. A. Liu, H. Rong, M. Paniccia, O. Cohen, and D. Hak, �??Net optical gain in a low loss silicon-on-insulator waveguide by stimulated Raman scattering,�?? Opt. Express 12, 4261�??4267 (2004),<a href=" http://www.opticsexpress.org/abstract.cfm?URI=OPEX-12-18-4261">http://www.opticsexpress.org/abstract.cfm?URI=OPEX-12-18-4261</a> [CrossRef] [PubMed]
  3. O. Boyraz and B. Jalali, �??Demonstration of 11dB fiber-to-fiber gain in a silicon Raman amplifier,�?? IEICE Elect. Express 1, 429-434 (2004). [CrossRef]
  4. O. Boyraz and B. Jalali, �??Demonstration of a silicon Raman laser,�?? Opt. Express 12, 5269-5273 (2004), <a href="http://www.opticsexpress.org/abstract.cfm?URI=OPEX-12-21-5269">http://www.opticsexpress.org/abstract.cfm?URI=OPEX-12-21-5269</a> [CrossRef] [PubMed]
  5. H. Rong, R. Jones, A. Liu, O. Cohen, D. Hak, A. Fang, and M. Paniccia, �??A continuous-wave Raman silicon laser,�?? Nature 433, 725-728 (2005). [CrossRef] [PubMed]
  6. V. R. Almeida, C. A. Barrios, R. R. Panepucci, and M. Lipson, �??All-optical control of light on a silicon chip,�?? Nature 431, 1081-1084 (2004). [CrossRef] [PubMed]
  7. C. E. Png, S. P. Chan, S. T. Lim, and G. T. Reed, �??Optical phase modulators for MHz and GHz modulation in silicon-on-insulator (SOI),�?? J. Lightwave Technol. 22, 1573-82 (2004). [CrossRef]
  8. J. J. Fijol, E. E. Fike, P. B. Keating, D. Gilbody, J. J. LeBlanc, S. A. Jacobson, W. J. Kessler, and M. B. Frish, �??Fabrication of silicon-on-insulator adiabatic tapers for low-loss optical interconnection of photonic devices,�?? in Photonics Packaging and Integration III, R. A. Heyler, D. J. Robbins, and G. E. Jabbour, eds., Proc. SPIE 4997, 157-170 (2003). [CrossRef]
  9. A. Sure, T. Dillon, J. Murakowski, C. Lin, D. Pustai, and D. W. Prather, �??Fabrication and characterization of three-dimensional silicon tapers,�?? Opt. Express 11, 3555-3561 (2003), <a href="http://www.opticsexpress.org/abstract.cfm?URI=OPEX-11-26-3555">http://www.opticsexpress.org/abstract.cfm?URI=OPEX-11-26-3555</a> [CrossRef] [PubMed]
  10. V. R. Almeida, R. R. Panepucci, and M. Lipson, �??Nanotaper for compact mode conversion,�?? Opt. Lett. 28, 1302-1304 (2003). [CrossRef] [PubMed]
  11. K. Yamada, M. Notomi, I. Yokohama, T. Shoji, T. Tsuchizawa, T. Watanabe, J. Takahashi, E. Tamechika, and H. Morita, �??SOI-based photonic crystal line defect waveguides,�?? in Proc. SPIE 4870, 324�??338 (2002). [CrossRef]
  12. Z. Lu and D. W. Prather, �??TIR-Evanescent coupler for fiber to waveguide integration of planar optoelectronic devices,�?? Opt. Lett. 29, 1784-1750 (2004). [CrossRef]
  13. G. Z. Masanovic, V. M. N. Passaro, and G. T. Reed, �??Dual grating-assisted directional coupling between fibres and thin semiconductor waveguides,�?? IEEE Photonics Technol. Lett. 15, 1395-1397 (2003). [CrossRef]
  14. G. Z. Masanovic, V. M. N. Passaro, and G. T. Reed, �??Coupling to nanophotonic waveguides using a dual grating-assisted directional coupler,�?? IEE Proc. Optoelectron. 152, 41-48 (2005). [CrossRef]
  15. S. J. McNab, N. Moll, and Y. A. Vlasov,�?? Ultra-low loss photonic integrated circuit with membrane-type photonic crystal waveguides,�?? Opt. Express 11, 2927-2939 (2003), <a href="http://www.opticsexpress.org/abstract.cfm?URI=OPEX-11-22-2927">http://www.opticsexpress.org/abstract.cfm?URI=OPEX-11-22-2927</a> [CrossRef] [PubMed]
  16. J. K. Butler, N.-H. Sun, G. A. Evans, L. Pang, and P. Congdon, �??Grating-assisted coupling of light between semiconductor and glass waveguides,�?? J. Lightwave Technol. 16, 1038-1048 (1998). [CrossRef]
  17. R. Orobtchouk, N. Schnell, T. Benyattou, J. Gregoire, S. Lardenois, M. Heitzmann, and J. M. Fedeli, �??New ARROW optical coupler for optical interconnect,�?? in Proceedings of IEEE International Conference on Interconnect Technology (2003), pp 233-235.
  18. W. Huang and J. Hong, �??Transfer matrix approach based on local normal modes for coupled waveguides with periodic perturbation,�?? J. Lightwave Technol. 10, 1367-1375 (1992). [CrossRef]
  19. V. M. N. Passaro, �??Optimal Design of grating-assisted directional couplers,�?? J. Lightwave Technol. 18, 973-984 (2000). [CrossRef]
  20. V. S. Nguyen, S. Burton, and P. Pan, �??The variation of physical properties of plasma-deposited silicon nitride and oxynitride with their compositions,�?? J. Electrochem. Soc. 131, 2348-2353 (1984). [CrossRef]

Cited By

Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.


« Previous Article  |  Next Article »

OSA is a member of CrossRef.

CrossCheck Deposited