OSA's Digital Library

Optics Express

Optics Express

  • Editor: Michael Duncan
  • Vol. 13, Iss. 25 — Dec. 12, 2005
  • pp: 10285–10291
« Show journal navigation

Dynamic switching of optical vortices with dynamic gamma-correction liquid crystal spiral phase plate

Q. Wang, X. W. Sun, P. Shum, and X. J. Yin  »View Author Affiliations


Optics Express, Vol. 13, Issue 25, pp. 10285-10291 (2005)
http://dx.doi.org/10.1364/OPEX.13.010285


View Full Text Article

Acrobat PDF (496 KB)





Browse Journals / Lookup Meetings

Browse by Journal and Year


   


Lookup Conference Papers

Close Browse Journals / Lookup Meetings

Article Tools

Share
Citations

Abstract

Generation and dynamic switching of optical vortices from charge 1 up to charge 6 at wavelength of 0.6328μm by one dynamic gamma-correction liquid crystal spiral phase plate are reported. The liquid crystal spiral phase plate comprises 46 slices, which are driven by a 16-channel voltage output card. The spiral phase plate was designed based on the relationship between the topological charge purity of an optical vortex generated by the spiral phase plate and the total number of slices. The calculation results show that a minimum slice number of 44 is required for generating optical vortices up to charge 6 with charge purity above 94%.

© 2005 Optical Society of America

1. Introduction

Optical vortices have been widely used in the study of optical tweezers [1–5

1 . N. B. Simpson , K. Dholakia , L. Allen , and M. J. Padgett , “ Mechanical equivalence of spin and orbital angular momentum of light: an optical spanner ,” Opt. Lett. 22 , 52 ( 1997 ). [CrossRef] [PubMed]

], trapping and guiding of cold atoms [6–8

6 . Y. Song , D. Milam , and W. T. Hill , “ Long, narrow all-light atom guide ,” Opt. Lett. 24 , 1805 ( 1999 ). [CrossRef]

], rotational frequency shift [9

9 . J. Courtial , D. A. Robertson , K. Dholakia , L. Allen , and M. J. Padgett , “ Rotational frequency shift of a light beam ,” Phys. Rev. Lett. 81 , 4828 ( 1998 ). [CrossRef]

, 10

10 . J. Courtial , K. Dholakia , D. A. Robertson , L. Allen , and M. J. Padgett , “ Measurement of the rotational frequency shift imparted to a rotating light beam possessing orbital angular momentum ,” Phys. Rev. Lett. 80 , 013601 ( 1998 ). [CrossRef]

] and entanglement states of photons [11

11 . A. Mair , A. Vaziri , G. Weihs , and A. Zeilinger , “ Entanglement of the orbital angular momentum states of photons ,” Nature 412 , 313 ( 2001 ). [CrossRef] [PubMed]

] etc.

There are several approaches to generate an optical vortex. The most common approach is the computer generated hologram [12

12 . N. R. Heckenberg , R. G. Mcduff , C. P. Smith , and A. G. White , “ Generation of optical phase singularities by computer-generated holograms ,” Opt. Lett. 17 , 221 ( 1992 ). [CrossRef] [PubMed]

, 13

13 . V. Y. Bazhenov , N. M. Burykin , M. S. Soskin , V. B. Taranenko , and M. V. Vasnetsov , “ Holographic spectral selectors and filters based on phase gratings and planar waveguides ,” in Optical Engineering , Proc. SPIE 1574 , 148 - 153 ( 1991 ). [CrossRef]

], in which an optical vortex can be obtained as a diffraction beam. The second approach is that, through an asymmetric structure inside a laser cavity, a high order Hermit Gaussian beam is generated, which is then converted into an optical vortex by two astigmatic lenses [14

14 . J. Courtial and M. J. Padgett , “ Performance of a cylindrical lens mode converter for producing Laguerre- Gaussian laser modes ,” Opt. Commun. 159 , 13 ( 1999 ). [CrossRef]

]. There are also papers on changing the structure inside laser cavity to obtain optical vortices without using cylindrical lens mode converter [15

15 . M. Harris , C. A. Hill , P. R. Tapster , and J. M. Vaughan , “ Laser modes with helical wave fronts ,” Phys. Rev. A 49 , 3119 ( 1994 ). [CrossRef] [PubMed]

]. The third one is using a spiral phase plate (SPP) to convert a Gaussian beam into an optical vortex.

The spiral phase plate approach has the merit of high conversion efficiency comparing with the hologram approach, and it can be easily handled comparing with the cylindrical lens mode converter. SPPs are not only used for generating optical vortices, it has also found applications in generating radially polarized beams [16

16 . S. C. Tidwell , D. H. Ford , and W. D. Kimura , “ Generating radially polarized beams interferometrically ,” Appl. Opt. 29 , 2234 ( 1990 ). [CrossRef] [PubMed]

] and edge contrast enhancement in microscopy [17

17 . S. Furhapter , A. Jesacher , S. Bernet , and M. Ritsch-Marte , “ Spiral phase contrast imaging in microscopy ,” Opt. Express 13 , 689 ( 2005 ), http://www.opticsexpress.org/abstract.cfm?URI=OPEX-13-3-689 . [CrossRef] [PubMed]

]. Various kinds of SPPs published hitherto are listed as follows, (1) a large pitch spiral phase plate dip into a refractive index matched solution [18

18 . M. W. Beijersbergen , R. P. C. Coerwinkel , M. Kristensen , and J. P. Woerdman , “ Helical-wavefront laser beams produced with a spiral phaseplate ,” Opt. Commun. 112 , 321 ( 1994 ). [CrossRef]

]; (2) fabricating multi-steps on the silica material though multi-etching process [19

19 . R. Oron , N. Davidson , A. A. Friesem , and E. Hasman , “ Efficient formation of pure helical laser beams ,” Opt. Commun. 182 , 205 ( 2000 ). [CrossRef]

]; (3) by use of excimer laser ablation to make multi-steps on polyimide substrate [20

20 . A. G. Peele , P. J. McMahon , D. Paterson , C. Q. Tran , A. P. Mancuso , K. A. Nugent , J. P. Hayes , E. Harvey , B. L. McNulty , and I. McNulty , “ Observation of an x-ray vortex ,” Opt. Lett. 27 , 1752 ( 2002 ). [CrossRef]

]; (4) employing a diamond tool on a high-precision computer driven lathe to make a mold at first, into the mold a polymer is cast, which is then UV cured [21

21 . S. S. R. Oemrawsingh1 , E. R. Elie , J. P. Woerdman , E. J. K. Verstegen , J. G. Kloosterboer , and G. W’t Hooft , “ Half-integral spiral phase plates for optical wavelengths ,” J. Opt. A: Pure Appl. Opt. 6 , S288 - S290 ( 2004 ). [CrossRef]

]; (5) using a deformed cracked plexiglass plate [22

22 . C. Rotschild , S. Zommer , S. Moed , O. Hershcovitz , and S. G. Lipson , “ Adjustable spiral phase plate ,” Appl. Opt. 43 , 2397 ( 2004 ). [CrossRef] [PubMed]

]; (6) electron-beam writing in photo resist [23

23 . X. C. Cheong , W. M. Lee , X.-C. Yuan , and L.-S. Zhang , “ Direct electron-beam writing of continuous spiral phase plates sin negative resist with high power efficiency for optical manipulation ,” Appl. Phys. Lett. 85 , 5784 ( 2004 ). [CrossRef]

]; (7) multi-stage vapor deposition [24

24 . K. Sueda , G. Miyaji , N. Miyanaga , and M. Nakatsuka , “ Laguerre-Gaussian beam generated with a multilevel spiral phase plate for high intensity laser pulses ,” Opt. Express 12 , 3548 ( 2004 ), http://www.opticsexpress.org/abstract.cfm?URI=OPEX-12-15-3548 . [CrossRef] [PubMed]

]; (8) using liquid crystal (LC) cell as a phase modulator [25

25 . K. Ganic , X. Gan , M. Gu , M. Hain , S. Somalingam , S. Stankovic , and T. Tschudi , “ Generation of doughnut laser beams by use of a liquid-crystal cell with a conversion efficiency near 100% ,” Opt. Lett. 27 , 1351 ( 2002 ). [CrossRef]

, 26

26 . Q. Wang , X. W. Sun , and P. Shum , “ Generating doughnut-shaped beams with large charge numbers by use of liquid-crystal spiral phase plates ,” Appl. Opt. 43 , 2292 ( 2004 ). [CrossRef] [PubMed]

]. In this paper, we shell present a specially designed LC SPP. Using only one of such SPP, optical vortices (at 0.6328 μm wavelength) of topological charge from 1 up to 6 with high quality are successfully generated and can also be dynamically switched by a multi-channel voltage output card. Comparing with other kinds of SPPs, the LC SPP presented here has advantages of high quality, low cost and easy to fabricate, being able to generate optical vortices with various charges (even if it is not an integer but a fraction) by only one SPP, adaptable to any visible wavelength, program controllable.

2. Relationship between beam purity and slice number

Multi-level SPP, comprising limited number of phase slices, is using discrete phase steps to imitate a continuous phase ramp. Apparently, it is an approximation. Using Fourier method, we shell show below the relationship between beam purity and the total slice number.

Denoting s as the total slice number of SPP, ϕ as the azimuthal angle, then the effect of SPP with charge m can be represented by:

f(ϕ)=eimod(sϕ2π)2mπs
(1)

where mod(sϕ2π) refers to the maximum integer less thansϕ2π, and 0≤ϕ≤2π. According to the Fourier transformation theory, f(ϕ) can be written as f(ϕ)=n=+cnexp(jnϕ), where n is an integer, -∞ < n < +∞

cn=12π02πf(ϕ)exp(jnϕ)dϕ=12π02πeimod(2π)2mπsexp(jnϕ)dϕ
(2)

Assuming a laser beam with an electric field of F(ρ, z) incidents on the SPP, the electric field of the emerged beam immediately after the SPP can be written as

u(ρ,ϕ,z)=F(ρ,z)n=+cnexp(jnϕ)
(3)

This is a combination of infinite Fourier components, each component represents an optical vortex with certain charge, cn is the amplitude of the charge n component. For a SPP with charge m, only the component cm exp(jmϕ) is desired, the others are unwanted. The percentage of all those unwanted components, R, can be written as

R=1cm2
(4)

Assuming R < 6% (Such a ratio should be good enough for most application, such as optical tweezers and cold atom guiding), from Eqs. 1 and 4, we can calculate the minimum requirement of the total slice number for a certain charge. The calculation results are tabulated in Table 1.

Table 1. Minimum slice number of a SPP and the corresponding topological charge of a vortex beam generated with over 94% purity.

table-icon
View This Table

It is worth measuring the beam purity experimentally. By measuring the beam purity, the orbital angular momentum spectrum of a light beam can be obtained [27~29]. However, the spectrometer must have high resolution to verify the high beam purity (94%) in our case. This work is in progress.

3. Liquid crystal spiral phase plate module

Using a cell gap of 18 μm, and LC with a birefringence of 0.23, we fabricated a LC SPP that can generate topological charge up to 6 for a 0.6328 μm He-Ne laser light beam. A total slice number of 46 was used, which satisfied the requirement of minimum slice number for generating a 94% pure beam with charge 6 in Table 1.

Figure 1 shows the relationship between phase retardation of the liquid crystal cell and the applied voltage. The measurement was done using a Michelson interferometer. By using polynomial curve fitting, the voltages applied to all slices for generating a vortex beam of a certain charge can be determined from Fig. 1.

The driving was realized by using a multi-channel analog voltage output card. To drive 46 slices, normally a 46-channel voltage output card is needed. However, it is possible to use a voltage output card with less channel number to achieve the same performance. Actually, we used only one 16-channel voltage card to drive it. If the whole dynamic region in Fig. 1 is evenly divided into 15 regions, then in each region, the retardation can be regarded as linearly dependent on driving voltage, and linearly distributed voltage across slices can be realized by connecting each pair of adjacent slices with a resistor, a series of resistors with the same resistance acts as a linear resistors voltage divider. These resistors can be fabricated by patterning ITO layer. By doing so, the 15 retardation regions with 46 slices can be driven by only one multi-channel output card with 16 channels.

Fig. 1. Phase retardation versus driving voltage of the LC cell.
Fig. 2. (a). Photograph of a LC SPP cell; (b). Photograph of an assembled LC SPP module.

It is worth mentioning that, in our experiment, especially thick cell gap up to 18 μm, and high birefringence (Δn = 0.23) liquid crystal material were used. Besides, anti-parallel alignment of liquid crystal molecules was employed.

The fabrication process of LC SPP cell is similar to the assembly process of a liquid crystal display cell. The fabricated LC SPP cell was assembled into a module for easy connection to multi-channel output card. The LC SPP cell and LC SPP module fabricated are shown in Figs. 2(a) and 2(b) respectively. The LC SPP proved to be robust, reliable and convenient in use. It is worth mentioning that we have developed a fabrication process in our lab to produce LC SPPs in batches with consistent quality.

4. Results and discussion

The direct method to verify an optical vortex is to interfere it with a plane wave [30

30 . A. G. White , C. P. Smith , N. R. Heckenberg , H. Rubinsztein-Dunlop , R. McDuff , C. O. Weiss , and Chr. Tamm , “ Interferometric measurements of phase singularities in the output of a visible laser ,” J. Mod. Opt. 38 , 2531 ( 1991 ). [CrossRef]

]. The experiment setup is actually a Mach-Zehnder interferometer, which is shown in Fig. 3.

By applying different voltage, optical vortex with various charges from 1 up to 6 can be obtained. Figure 4 shows the fork like interference patterns corresponding to optical vortices with different topological charges. A fork like interference pattern is formed when the two interference beams are at a small angle with each other. If the two beams are coaxial, the interference pattern will turn into a radial spokes pattern, which is shown in Fig. 5. We also observed the Fraunhofer diffraction pattern of Gaussian beam passing through LC SPP, the experiment setup is depicted in Fig. 6; the diffraction patterns are shown in Fig. 7. All these pictures were taken at the same focus length.

Fig. 3. The setup for verification of optical vortex.
Fig. 4. Fork like interference patterns corresponding to charges from 1 up to 6.
Fig. 5. (2.06MB) Movie of dynamic switching of radial spokes interference patterns from charges 1 to 6.
Fig. 6. Setup for observing Fraunhofer diffraction pattern of Gaussian beam passing through the LC SPP.
Fig. 7. (1.58MB) Movie of Fraunhofer diffraction patterns of Gaussian beams passing through LC SPP with charges from 1 to 6.

By properly coding the driving program, the charge of LC SPP can be dynamically switched. However, due to the thick cell gap and high viscosity LC used, change from one charge to another takes about one second. The dynamic switching of Laguerre-Gaussian beam of different charge is shown in the movies linked to Figs. 5 and 7, which show that the optical vortices are generated by the dynamic gamma-correction LC SPP with high quality.

Actually, in the center of the LC SPP, there is a small circle about 100 μm diameter in size, whose retardation cannot be controlled by applied voltage. However, this part of light beam is only a very small percentage of the total beam energy.

Generally, when a Gaussian beam passes though a spiral phase plate, the emerged beam is not a pure mode of Laguerre-Gaussian (LG) beam even though the topological charge of the SPP is an integer [31

31 . M. W. Beijersbergen , R. P. C. Coerwinkel , M. Kristensen , and J. P. Woerdman , “ Helical-wavefront laser beams produced with a spiral phaseplate ,” Opt. Commun. 112 , 321 ( 1994 ). [CrossRef]

]. Actually, if the topological charge of SPP is l , then the beam emerged is composed of LG modes with the same topological charge l but different radial index, and the largest weight mode is LG 0l . For the modes with non-zero index, the diffraction pattern presents more than one ring, which can be seen in Fig. 7, however, the figure shows that most of the energy is within the first ring. So the impurity will not be a problem in most applications, such as optical tweezers, frequency shifter and cold atom guiding.

The LC SPP can also be used to generate non-integer topological charge optical vortex, i.e., the l in the expression of exp(ilϕ) is no longer an integer but a fraction, the term of exp(ilϕ) represents the azimuth angle dependent wave front of an optical vortex. The photon of non-integer topological charge optical vortex possesses high dimensional entanglement, which may find applications in future optic communication [11

11 . A. Mair , A. Vaziri , G. Weihs , and A. Zeilinger , “ Entanglement of the orbital angular momentum states of photons ,” Nature 412 , 313 ( 2001 ). [CrossRef] [PubMed]

]. The LC SPP described here are especially suitable for generation of optical vortices with non-integer topological charge of any value and dynamically switching between them.

As the fabrication process is based on lithography and LCD cell assembly, it is possible to fabricate large slice number and large size SPP at low cost. According to aforementioned analysis, a SPP with large slice number can improve the beam purity of a certain topological charge. By expanding light beam, large size LC SPP is possible to work in the condition of high intensity laser pulses.

It is worth mentioning that the LC SPP only works for linearly polarized light.

5. Conclusion

We designed and fabricated a dynamic gamma-correction LC SPP. Using this kind of SPP, high quality optical vortices with topological charge from 1 to 6 can be generated by only one SPP. the charge of the optical vortex can be dynamically switched in about 1 second. The LC SPP is able to adapt to any visible wavelength. The fabrication process is quite similar to that of a normal LCD cell, so it is low cost and reliable. These advantages are distinct compared to other types of SPP.

Reference and links

1 .

N. B. Simpson , K. Dholakia , L. Allen , and M. J. Padgett , “ Mechanical equivalence of spin and orbital angular momentum of light: an optical spanner ,” Opt. Lett. 22 , 52 ( 1997 ). [CrossRef] [PubMed]

2 .

E. Santamato , A. Sasso , B. Piccirillo , and A. Vella , “ Optical angular momentum transfer to transparent isotropic particles using laser beam carrying zero average angular momentum ,” Opt. Express 10 , 871 ( 2002 ). http://www.opticsexpress.org/abstract.cfm?URI=OPEX-10-17-871 . [PubMed]

3 .

K. T. Gahagan and G. A. Swartzlander Jr. , “ Optical vortex trapping of particles ,” Opt. Lett. 21 , 827 ( 1996 ). [CrossRef] [PubMed]

4 .

L. Paterson , M. P. MacDonald , J. Arlt , W. Sibbett , P. E. Bryant , and K. Dholakia , “ Controlled rotation of optically trapped microscopic particles ,” Science 292 , 912 ( 2001 ). [CrossRef] [PubMed]

5 .

M. P. MacDonald , “ Revolving interference pattern for the rotation of optically trapped particles ,” Opt. Commun. 201 , 21 ( 2002 ). [CrossRef]

6 .

Y. Song , D. Milam , and W. T. Hill , “ Long, narrow all-light atom guide ,” Opt. Lett. 24 , 1805 ( 1999 ). [CrossRef]

7 .

Xinye Xu , K. Kim , W. Jhe , and N. Kwon , “ Efficient optical guiding of trapped cold atoms by a hollow laser beam ,” Phy. Rev. A 63 , 3401 ( 2001 ). [CrossRef]

8 .

T. Kuga , Y. T. Noritsugu Shiokawa , T. Hirano , Y. Shimizu , and H. Sasada , “ Novel optical trap of atoms with a doughnut beam ,” Phys. Rev. Lett. 78 , 4713 ( 1997 ). [CrossRef]

9 .

J. Courtial , D. A. Robertson , K. Dholakia , L. Allen , and M. J. Padgett , “ Rotational frequency shift of a light beam ,” Phys. Rev. Lett. 81 , 4828 ( 1998 ). [CrossRef]

10 .

J. Courtial , K. Dholakia , D. A. Robertson , L. Allen , and M. J. Padgett , “ Measurement of the rotational frequency shift imparted to a rotating light beam possessing orbital angular momentum ,” Phys. Rev. Lett. 80 , 013601 ( 1998 ). [CrossRef]

11 .

A. Mair , A. Vaziri , G. Weihs , and A. Zeilinger , “ Entanglement of the orbital angular momentum states of photons ,” Nature 412 , 313 ( 2001 ). [CrossRef] [PubMed]

12 .

N. R. Heckenberg , R. G. Mcduff , C. P. Smith , and A. G. White , “ Generation of optical phase singularities by computer-generated holograms ,” Opt. Lett. 17 , 221 ( 1992 ). [CrossRef] [PubMed]

13 .

V. Y. Bazhenov , N. M. Burykin , M. S. Soskin , V. B. Taranenko , and M. V. Vasnetsov , “ Holographic spectral selectors and filters based on phase gratings and planar waveguides ,” in Optical Engineering , Proc. SPIE 1574 , 148 - 153 ( 1991 ). [CrossRef]

14 .

J. Courtial and M. J. Padgett , “ Performance of a cylindrical lens mode converter for producing Laguerre- Gaussian laser modes ,” Opt. Commun. 159 , 13 ( 1999 ). [CrossRef]

15 .

M. Harris , C. A. Hill , P. R. Tapster , and J. M. Vaughan , “ Laser modes with helical wave fronts ,” Phys. Rev. A 49 , 3119 ( 1994 ). [CrossRef] [PubMed]

16 .

S. C. Tidwell , D. H. Ford , and W. D. Kimura , “ Generating radially polarized beams interferometrically ,” Appl. Opt. 29 , 2234 ( 1990 ). [CrossRef] [PubMed]

17 .

S. Furhapter , A. Jesacher , S. Bernet , and M. Ritsch-Marte , “ Spiral phase contrast imaging in microscopy ,” Opt. Express 13 , 689 ( 2005 ), http://www.opticsexpress.org/abstract.cfm?URI=OPEX-13-3-689 . [CrossRef] [PubMed]

18 .

M. W. Beijersbergen , R. P. C. Coerwinkel , M. Kristensen , and J. P. Woerdman , “ Helical-wavefront laser beams produced with a spiral phaseplate ,” Opt. Commun. 112 , 321 ( 1994 ). [CrossRef]

19 .

R. Oron , N. Davidson , A. A. Friesem , and E. Hasman , “ Efficient formation of pure helical laser beams ,” Opt. Commun. 182 , 205 ( 2000 ). [CrossRef]

20 .

A. G. Peele , P. J. McMahon , D. Paterson , C. Q. Tran , A. P. Mancuso , K. A. Nugent , J. P. Hayes , E. Harvey , B. L. McNulty , and I. McNulty , “ Observation of an x-ray vortex ,” Opt. Lett. 27 , 1752 ( 2002 ). [CrossRef]

21 .

S. S. R. Oemrawsingh1 , E. R. Elie , J. P. Woerdman , E. J. K. Verstegen , J. G. Kloosterboer , and G. W’t Hooft , “ Half-integral spiral phase plates for optical wavelengths ,” J. Opt. A: Pure Appl. Opt. 6 , S288 - S290 ( 2004 ). [CrossRef]

22 .

C. Rotschild , S. Zommer , S. Moed , O. Hershcovitz , and S. G. Lipson , “ Adjustable spiral phase plate ,” Appl. Opt. 43 , 2397 ( 2004 ). [CrossRef] [PubMed]

23 .

X. C. Cheong , W. M. Lee , X.-C. Yuan , and L.-S. Zhang , “ Direct electron-beam writing of continuous spiral phase plates sin negative resist with high power efficiency for optical manipulation ,” Appl. Phys. Lett. 85 , 5784 ( 2004 ). [CrossRef]

24 .

K. Sueda , G. Miyaji , N. Miyanaga , and M. Nakatsuka , “ Laguerre-Gaussian beam generated with a multilevel spiral phase plate for high intensity laser pulses ,” Opt. Express 12 , 3548 ( 2004 ), http://www.opticsexpress.org/abstract.cfm?URI=OPEX-12-15-3548 . [CrossRef] [PubMed]

25 .

K. Ganic , X. Gan , M. Gu , M. Hain , S. Somalingam , S. Stankovic , and T. Tschudi , “ Generation of doughnut laser beams by use of a liquid-crystal cell with a conversion efficiency near 100% ,” Opt. Lett. 27 , 1351 ( 2002 ). [CrossRef]

26 .

Q. Wang , X. W. Sun , and P. Shum , “ Generating doughnut-shaped beams with large charge numbers by use of liquid-crystal spiral phase plates ,” Appl. Opt. 43 , 2292 ( 2004 ). [CrossRef] [PubMed]

27 .

M. V. Vasnetsov , J. P. Torres , D. V. Petrov , and L. Torner , “ Observation of the orbital angular momentum spectrum of a light beam ,” Opt. Lett. 28 , 2285 ( 2003 ). [CrossRef] [PubMed]

28 .

X. Xue , H. Wei , and A. G. Kirk , “ Beam analysis by fractional Fourier transform ,” Opt. Lett. 26 , 1746 ( 2001 ). [CrossRef]

29 .

J. Leach , M. J. Padgett , S. M. Barnett , S. Franke-Arnold , and J. Courtial1 , “ Measuring the orbital angular momentum of a single photon ,” Phys. Rev. Lett. 88 , 257901 ( 2002 ). [CrossRef] [PubMed]

30 .

A. G. White , C. P. Smith , N. R. Heckenberg , H. Rubinsztein-Dunlop , R. McDuff , C. O. Weiss , and Chr. Tamm , “ Interferometric measurements of phase singularities in the output of a visible laser ,” J. Mod. Opt. 38 , 2531 ( 1991 ). [CrossRef]

31 .

M. W. Beijersbergen , R. P. C. Coerwinkel , M. Kristensen , and J. P. Woerdman , “ Helical-wavefront laser beams produced with a spiral phaseplate ,” Opt. Commun. 112 , 321 ( 1994 ). [CrossRef]

OCIS Codes
(230.3720) Optical devices : Liquid-crystal devices
(230.6120) Optical devices : Spatial light modulators

ToC Category:
Research Papers

Citation
Q. Wang, X.W. Sun, P. Shum, and X. J. Yin, "Dynamic switching of optical vortices with dynamic gamma-correction liquid crystal spiral phase plate," Opt. Express 13, 10285-10291 (2005)
http://www.opticsinfobase.org/oe/abstract.cfm?URI=oe-13-25-10285


Sort:  Journal  |  Reset  

References

  1. N. B. Simpson, K. Dholakia, L. Allen, and M. J. Padgett, "Mechanical equivalence of spin and orbital angular momentum of light: an optical spanner," Opt. Lett. 22, 52 (1997). [CrossRef] [PubMed]
  2. E. Santamato, A. Sasso, B. Piccirillo and A. Vella, "Optical angular momentum transfer to transparent isotropic particles using laser beam carrying zero average angular momentum," Opt. Express 10, 871 (2002). <a href="http://www.opticsexpress.org/abstract.cfm?URI=OPEX-10-17-871">http://www.opticsexpress.org/abstract.cfm?URI=OPEX-10-17-871</a>. [PubMed]
  3. K. T. Gahagan and G. A. Swartzlander, Jr, "Optical vortex trapping of particles," Opt. Lett. 21, 827 (1996). [CrossRef] [PubMed]
  4. L. Paterson, M. P. MacDonald, J. Arlt, W. Sibbett, P. E. Bryant, and K. Dholakia, "Controlled rotation of optically trapped microscopic particles," Science 292, 912 (2001). [CrossRef] [PubMed]
  5. M. P. MacDonald, "Revolving interference pattern for the rotation of optically trapped particles," Opt. Commun. 201, 21 (2002). [CrossRef]
  6. Y. Song, D. Milam, and W. T. Hill, "Long, narrow all-light atom guide," Opt. Lett. 24, 1805 (1999). [CrossRef]
  7. Xinye Xu, K. Kim, W. Jhe, and N. Kwon, "Efficient optical guiding of trapped cold atoms by a hollow laser beam," Phy. Rev. A 63, 3401 (2001). [CrossRef]
  8. T. Kuga, Y. T., Noritsugu Shiokawa, T. Hirano, Y. Shimizu and H. Sasada, "Novel optical trap of atoms with a doughnut beam," Phys. Rev. Lett. 78, 4713 (1997). [CrossRef]
  9. J. Courtial, D. A. Robertson, K. Dholakia, L. Allen, and M. J. Padgett, "Rotational frequency shift of a light beam," Phys. Rev. Lett. 81, 4828 (1998). [CrossRef]
  10. J. Courtial, K. Dholakia, D. A. Robertson, L. Allen, and M. J. Padgett, "Measurement of the rotational frequency shift imparted to a rotating light beam possessing orbital angular momentum," Phys. Rev. Lett. 80, 013601 (1998). [CrossRef]
  11. A. Mair, A. Vaziri, G. Weihs and A. Zeilinger, "Entanglement of the orbital angular momentum states of photons," Nature 412, 313 (2001). [CrossRef] [PubMed]
  12. N. R. Heckenberg, R. G. Mcduff, C. P. Smith, and A. G. White, "Generation of optical phase singularities by computer-generated holograms," Opt. Lett. 17, 221 (1992). [CrossRef] [PubMed]
  13. V. Y. Bazhenov, N. M. Burykin, M. S. Soskin, V. B. Taranenko and M. V. Vasnetsov, "Holographic spectral selectors and filters based on phase gratings and planar waveguides," in Optical Engineering, Proc. SPIE 1574, 148-153 (1991). [CrossRef]
  14. J. Courtial, and M. J. Padgett, "Performance of a cylindrical lens mode converter for producing Laguerre- Gaussian laser modes," Opt. Commun. 159, 13 (1999). [CrossRef]
  15. M. Harris, C. A. Hill, P. R.Tapster, and J. M. Vaughan, "Laser modes with helical wave fronts," Phys. Rev. A 49, 3119 (1994). [CrossRef] [PubMed]
  16. S. C. Tidwell, D. H. Ford, and W. D. Kimura, "Generating radially polarized beams interferometrically," Appl. Opt. 29, 2234 (1990). [CrossRef] [PubMed]
  17. S. Furhapter, A. Jesacher, S. Bernet, and M. Ritsch-Marte, "Spiral phase contrast imaging in microscopy," Opt. Express 13, 689 (2005), <a href="http://www.opticsexpress.org/abstract.cfm?URI=OPEX-13-3-689">http://www.opticsexpress.org/abstract.cfm?URI=OPEX-13-3-689</a>. [CrossRef] [PubMed]
  18. M. W. Beijersbergen, R. P. C. Coerwinkel, M. Kristensen and J. P. Woerdman, "Helical-wavefront laser beams produced with a spiral phaseplate," Opt. Commun. 112, 321 (1994). [CrossRef]
  19. R. Oron, N. Davidson, A. A. Friesem, and E. Hasman, "Efficient formation of pure helical laser beams," Opt. Commun. 182, 205 (2000). [CrossRef]
  20. A. G. Peele, P. J. McMahon, D. Paterson, C. Q. Tran, A. P. Mancuso, and K. A. Nugent, J. P. Hayes and E. Harvey, B. L. McNulty and I. McNulty, "Observation of an x-ray vortex," Opt. Lett. 27, 1752 (2002). [CrossRef]
  21. S. S. R. Oemrawsingh1, E. R. Elie, J. P. Woerdman, E. J. K. Verstegen, J. G. Kloosterboer and G. W't Hooft, "Half-integral spiral phase plates for optical wavelengths," J. Opt. A: Pure Appl. Opt. 6, S288- S290 (2004). [CrossRef]
  22. C. Rotschild, S. Zommer, S. Moed, O. Hershcovitz, and S. G. Lipson, "Adjustable spiral phase plate," Appl. Opt. 43, 2397 (2004). [CrossRef] [PubMed]
  23. X. C. Cheong, W. M. Lee, X.-C. Yuan, and L.-S. Zhang, "Direct electron-beam writing of continuous spiral phase plates sin negative resist with high power efficiency for optical manipulation," Appl. Phys. Lett. 85, 5784 (2004). [CrossRef]
  24. K. Sueda, G. Miyaji, N. Miyanaga, and M. Nakatsuka, "Laguerre-Gaussian beam generated with a multilevel spiral phase plate for high intensity laser pulses," Opt. Express 12, 3548 (2004), http://www.opticsexpress.org/abstract.cfm?URI=OPEX-12-15-3548. [CrossRef] [PubMed]
  25. K. Ganic, X. Gan, M. Gu, M. Hain, S. Somalingam, S. Stankovic, and T. Tschudi, "Generation of doughnut laser beams by use of a liquid-crystal cell with a conversion efficiency near 100%," Opt. Lett. 27, 1351 (2002). [CrossRef]
  26. Q. Wang, X. W. Sun, and P. Shum, "Generating doughnut-shaped beams with large charge numbers by use of liquid-crystal spiral phase plates," Appl. Opt. 43, 2292 (2004). [CrossRef] [PubMed]
  27. M. V. Vasnetsov, J. P. Torres, D. V. Petrov, and L. Torner, "Observation of the orbital angular momentum spectrum of a light beam," Opt. Lett. 28, 2285 (2003). [CrossRef] [PubMed]
  28. X. Xue, H. Wei and A. G. Kirk, "Beam analysis by fractional Fourier transform," Opt. Lett. 26, 1746 (2001). [CrossRef]
  29. J. Leach, M. J. Padgett, S. M. Barnett, S. Franke-Arnold, and J. Courtial1, "Measuring the orbital angular momentum of a single photon," Phys. Rev. Lett. 88, 257901 (2002). [CrossRef] [PubMed]
  30. A. G. White, C. P. Smith, N. R. Heckenberg, H. Rubinsztein-Dunlop, R. McDuff, C. O. Weiss, and Chr. Tamm, "Interferometric measurements of phase singularities in the output of a visible laser," J. Mod. Opt. 38, 2531 (1991). [CrossRef]
  31. M. W.Beijersbergen, R. P. C. Coerwinkel , M. Kristensen and J. P. Woerdman, "Helical-wavefront laser beams produced with a spiral phaseplate," Opt. Commun. 112, 321 (1994). [CrossRef]

Cited By

Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.

Multimedia

Multimedia FilesRecommended Software
» Media 1: AVI (2484 KB)     
» Media 2: AVI (2346 KB)     

« Previous Article  |  Next Article »

OSA is a member of CrossRef.

CrossCheck Deposited