OSA's Digital Library

Optics Express

Optics Express

  • Editor: Michael Duncan
  • Vol. 14, Iss. 1 — Jan. 9, 2006
  • pp: 361–368
« Show journal navigation

Integrated photonic switches for nanosecond packet-switched optical wavelength conversion

Onur Fidaner, Hilmi Volkan Demir, Vijit A. Sabnis, Jun-Fei Zheng, James S. Harris, Jr., and David A. B. Miller  »View Author Affiliations


Optics Express, Vol. 14, Issue 1, pp. 361-368 (2006)
http://dx.doi.org/10.1364/OPEX.14.000361


View Full Text Article

Acrobat PDF (727 KB)





Browse Journals / Lookup Meetings

Browse by Journal and Year


   


Lookup Conference Papers

Close Browse Journals / Lookup Meetings

Article Tools

Share
Citations

Abstract

We present a multifunctional photonic switch that monolithically integrates an InGaAsP/InP quantum well electroabsorption modulator and an InGaAs photodiode as a part of an on-chip, InP optoelectronic circuit. The optical multifunctionality of the switch offers many configurations to allow for different optical network functions on a single chip. Here we experimentally demonstrate GHz-range optical wavelength-converting switching with only ~10 mW of absorbed input optical power, electronically controlled packet switching with a reconfiguration time of <2.5 ns, and optically controlled packet switching in <300 ps.

© 2006 Optical Society of America

1. Introduction

Photonic network architectures in which optical data is sent from one node to another without being converted to electronic signals are drawing attention as current technologies that propagate high-speed electronic signals between discrete optoelectronic chips increase the packaging and component costs, size, power consumption, and heat dissipation. To date, a number of different photonic device architectures have been proposed for this purpose. In particular, photonic integrated circuits on a single substrate hold great promise for use in photonic networks [1

1. M.L. Mašanovic, V. Lal, J.A. Summers, J.S. Barton, E.J. Skogen, L.G. Rau, L.A. Coldren, and D.J. Blumenthal, “Widely tunable monolithically integrated all-optical wavelength converters in InP,” J. Lightwave Technol. 23, 1350–1362 (2005). [CrossRef]

, 2

2. J.M. Hutchinson, J. Zheng, J.S. Barton, J.A. Henness, M.L. Mašanovic, M.N. Sysak, L.A. Johansson, D.J. Blumenthal, L.A. Coldren, H.V. Demir, V.A. Sabnis, O. Fidaner, J.S. Harris, and D.A.B. Miller, “Indium Phosphide-Based Optoelectronic Wavelength Conversion for High-Speed Optical Networks,” Intel Technology Journal 8, 161–171 (2004).

]. These integrated switches can be made very fast, offering interesting time-domain applications [3

3. S. Kodama, T. Yoshimatsu, and H. Ito, “500 Gbit/s optical gate monolithically integrating photodiode and electroabsorption modulator,” Electron. Lett. 40, 555–556 (2004). [CrossRef]

]. On the other hand, multifunctionality of optical network nodes is also becoming increasingly a critical aspect for the development of future optical networks. The network nodes of the future should be capable of utilizing as many of the available physical domains as possible, i.e., wavelength, space, time, and code [4

4. S.J.B. Yoo, “Advanced Optical Components for Next Generation Photonic Networks,” Proc. SPIE 5246, 224–234 (2003). [CrossRef]

]. For that, it is desirable not only to map one channel to other channels within the same domain (such as wavelength conversion) but also to map one domain to another (such as wavelength-space mapping) within a reasonable reconfiguration time. Various devices have thus far been proposed by a number of research groups to realize one or more of these network functions, such as regeneration, fast switching, wavelength conversion, wavelength-division multiplexing (WDM) to time-division multiplexing (TDM) conversion, and packet switching [5–8

5. E. S. Awad, P. S. Cho, C. Richardson, N. Moulton, and J. Goldhar, ”Optical 3R regeneration using a single EAM for all-optical timing extraction with simultaneous reshaping and wavelength conversion,” IEEE Photonics. Technol. Lett. 14, 1378–1380 (2002). [CrossRef]

]. Our group has previously demonstrated multifunctional switches that are scalable into two-dimensional arrays [9

9. H. V. Demir, V. A. Sabnis, J.-F. Zheng, O. Fidaner, J. S. Harris Jr., and D. A. B. Miller, “Scalable wavelength-converting crossbar switches,” IEEE Photonics. Technol. Lett. 16, 2305–2307 (2004). [CrossRef]

] allowing for space switching along with other network functions such as all-optical wavelength conversion and broadcasting [10

10. H. V. Demir, V. A. Sabnis, O. Fidaner, J. S. Harris Jr., D. A. B. Miller, and J. Zheng, “Dual-diode quantum-well modulator for C-band wavelength conversion and broadcasting,” Opt. Express 12, 310–316 (2004). [CrossRef] [PubMed]

]. These approaches enable multifunctional node elements for next-generation optical networks [11

11. H. V. Demir, V. A. Sabnis, O. Fidaner, J.-F. Zheng, J. S. Harris Jr., and D. A. B. Miller, “Multifunctional Integrated Photonic Switches,” IEEE J. Sel. Top. Quantum Electron. 11, 86–96 (2005). [CrossRef]

]. These nodes, however, require active control for optimum use within the network. Hence, although it is undesirable to propagate data signals in the electronic domain, it is highly desirable to have electronic control over the data flow [12

12. O. Fidaner, H. V. Demir, V. A. Sabnis, J. S. Harris Jr., D. A. B. Miller, and J.-F. Zheng, “Electrically-reconfigurable multifunctional integrated phonic switches,” The 17th Annual Meeting of the IEEE LEOS Nov. 8-9, 2004 . 2, 455 – 456 (2004).

, 13

13. O. Fidaner, H. V. Demir, V. A. Sabnis, J. S. Harris Jr., D. A. B. Miller, and J.-F. Zheng, “Multifunctional integrated photonic switches for nanosecond packet-switched wavelength conversion,” Integrated Photonics Research (IPR) (OS A Technical Digest, Optical Society of America, San Diego, CA, 2005).

].

In this work we demonstrate the configurability of our integrated photonic switches and present switching results that exhibit nanosecond time-scale electronic reconfigurability for different optical network functions including all-optical wavelength conversion. Additionally, these switches can be reconfigured optically within <1ns, if desired. These reconfiguration times are compatible with the requirements of the current and future optical networks. In particular, we demonstrate the first optical wavelength conversion electrically packet-switched using a single integrated photonic switch.

2. Switch structure

Our device integrates a waveguide electroabsorption modulator (EAM) with a surface-normal photodetector (PD). The PD has a p-i-n diode structure with a 1.25 μm thick InGaAs absorber region, absorbing over the 1.3-1.6 μm wavelength range. The EAM is a waveguide p-i-n diode that incorporates an InGaAsP/InP multiple quantum well structure optimized for large optical modulation over the C-band. The PD drives the EAM directly through a TaN thin-film resistor integrated in the vicinity of EAM and PD on the photonic chip as sketched in Fig. 1. There are two optical inputs to the switch; one onto the PD and one into the EAM. There are also two electrical inputs, the PD bias and the EAM bias. By using these inputs in various configurations, different aspects of the output data stream from the modulator can be controlled and a multitude of applications can be realized using the same physical construction.

Fig. 1. A three-dimensional schematic of an integrated photonic switch incorporating a photodiode (PD) and an electroabsorption modulator (EAM). A thin film resistor is also integrated on the chip. There are two electrical voltage inputs (across the biasing pads of the EAM and the PD) and two optical inputs (onto the PD and into the EAM). There is one optical output (from the EAM).

3. Switch operation modes

Figure 2(a) shows the basic operation for which the EAM and the PD are both reverse biased; there are also local bypass capacitors (not shown on the diagram) in parallel with each of the bias voltage sources. The bias across the EAM is set such that its quantum wells initially absorb the light coupled into the modulator waveguide. The presence of an input signal (i.e., an optical binary “1”) at λ 1 on the PD results in a photocurrent, IPD, that generates a voltage drop across the resistor, R, and consequently across the EAM. With this optically-induced voltage swing across the modulator, the absorption band edge shifts due to the quantum-confined Stark effect. This results in optical transmission through the EAM, leading to an optical binary “1” at the output. In this way, the input data is transferred bit-by-bit to the output, which converts the signal wavelength from λ 1 to λ 2.

In the second configuration as shown in Fig. 2(b), the EAM is electrically enabled when reverse biased and disabled when slightly forward biased by the respective enabling and disabling periods of a biasing electronic signal that comes from the central network management system (CNMS). With the enabling signal, the DC operating point of the EAM is set as in the basic switch operation and the optical switching action is observed in a similar way. However, if the disabling CNMS signal is present across the EAM, then the optical data transfer is completely blocked despite the optical input data steam that may be present at the PD. In this way, the electronic CNMS signal gates the optical switching and the optical wavelength conversion is packet switched electronically.

Fig. 2. Simplified circuit diagram of the integrated photonic switch operated in different configurations. (a) Basic optical switching operation: Both the EAM and the PD are reverse biased with a DC signal. Input data stream on the PD is transferred to the output, converting the wavelength, (b) Electrical packet switching: The EAM bias is a signal from the central network management system (CNMS) which enables/disables the switching node. The input data stream is seen at the output only when there is the enabling signal. (c) Optical packet switching: The optical control signal from the CNMS is incident on the PD. The data stream is coupled into the EAM this time, instead of a cw beam. The PD gates the input data stream. (d) Simultaneous optical operations: Optical packet switching and wavelength conversion takes place simultaneously. Both the data and the control signal are incident on the photodiode and the optical input to the EAM is a continuous wave signal. EAM transmission occurs when both PD input signals are high.

In the third configuration of Fig 2(c), the EAM and the PD are constantly reverse biased as in the basic switch operation case (Fig. 2(a)). This time, the optical data stream is coupled into the EAM instead of the PD. The data is only transmitted when the optical control beam present on the PD is high. This optical control signal comes from the CNMS and it again gates the data channel. Note that, in this configuration, the input light beam on the EAM is transferred to the output without modulation, so it can be modulated with some other stream of information in a preceding or a subsequent switch if desired.

Thus, operating the same switch structure in different input configurations, a variety of network functionality can be achieved. Additionally, since this switch architecture is further scalable in two dimensions, it is possible to fabricate crossbar switches to offer space switching as well [9

9. H. V. Demir, V. A. Sabnis, J.-F. Zheng, O. Fidaner, J. S. Harris Jr., and D. A. B. Miller, “Scalable wavelength-converting crossbar switches,” IEEE Photonics. Technol. Lett. 16, 2305–2307 (2004). [CrossRef]

]. These structures can then convert any set of input wavelengths to any set of output wavelengths available. However, to exploit such a structure fully in a network, it is important to reconfigure the switch rapidly and electronically. Figure 3 shows an example of how the basic switch architecture can be put in a one dimensional optical bus structure such that only the data stream for which the switch is enabled is observed at the output. In such a one-dimensional architecture, the ability to toggle between two switches and enable the desired one rapidly while disabling the other one is critical to proper bus operation.

Fig. 3. One dimensional arrays of the switch. Only the input for which the corresponding switch is enabled is seen at the output. It is important to rapidly change the enabled switch for better network functionality.

4. Experimental results

Figure 4 shows a plan view of a fabricated integrated photonic switch. The structure consists of an EAM with a width of 2 μm, a length of 300 μm and a 0.5 μm thick i-region that contains ten strain-compensated InGaAsP/InP quantum wells. Integrated with the EAM is an InGaAs photodiode with a 30 μm x 30 μm mesa, a 1.25 μm thick absorbing region, a 1.46 μm thick i-region, and an on-chip TaN thin film resistor of 450 Ohms. This device is designed to have a bandwidth of 2.5 GHz. The fabricated device exhibits a 3-dB switching bandwidth of 2.26 GHz, slightly reduced from the targeted value due to parasitic contact resistances [11

11. H. V. Demir, V. A. Sabnis, O. Fidaner, J.-F. Zheng, J. S. Harris Jr., and D. A. B. Miller, “Multifunctional Integrated Photonic Switches,” IEEE J. Sel. Top. Quantum Electron. 11, 86–96 (2005). [CrossRef]

]. The photodiode and modulator are monolithically integrated using a new selective area growth technique [14

14. V. A. Sabnis, H. V. Demir, O. Fidaner, J. S. Harris Jr., D. A. B. Miller, J.-F. Zheng, N. Li, T.-C. Wu, and Y.-M. Houng. “Optically-switched dual-diode electroabsorption modulators,” Integrated Photonics Research (IPR) (OS A Technical Digest, Optical Society of America, Washington, DC, 2003).

] and a self-aligning polymer planarization and passivation technique [15

15. H. V. Demir, J.-F. Zheng, V. A. Sabnis, O. Fidaner, J. P. Hanberg, J. S. Harris Jr., and D. A. B. Miller, “Self-aligning planarization and passivation in the integration of III-V semiconductor devices,” IEEE Trans. on Semiconductor Manufacturing 18, 182 – 189 (2005). [CrossRef]

, 16

16. J.-F. Zheng, J. P. Hanberg, H. V. Demir, V. A. Sabnis, O. Fidaner, J. S. Harris Jr., and D. A. B. Miller, “Novel passivation and planarization in the integration of III-V semiconductor devices,” Proceedings of SPIE Photonics West Conference, San Jose, CA (January 24-29, 2004). Paper 5356-9.

].

Fig. 4. SEM picture of a fabricated photodiode-modulator switch.

All-optical unconstrained wavelength conversion and dual-wavelength broadcasting have been demonstrated previously at data rates of 2.5 Gb/s [17

17. V. A. Sabnis, H. V. Demir, O. Fidaner, J. S. Harris Jr., D. A. B. Miller, J.-F. Zheng, N. Li, T.-C. Wu, H.-T. Chen, and Y.-M. Houng, “Optically-controlled electroabsorption modulators for unconstrained wavelength conversion,” Appl. Phys. Lett. 84, 469–471 (2004). [CrossRef]

] and 1.25 Gb/s [10

10. H. V. Demir, V. A. Sabnis, O. Fidaner, J. S. Harris Jr., D. A. B. Miller, and J. Zheng, “Dual-diode quantum-well modulator for C-band wavelength conversion and broadcasting,” Opt. Express 12, 310–316 (2004). [CrossRef] [PubMed]

], respectively, across the entire C-band. In Fig. 5 we present experimental results of the configurations described in Fig. 2. In these configurations PD and EAM are typically reverse biased with 15 V and 6 V DC signals, respectively, except for the configuration in Fig. 2(b), where a square wave CNMS signal is applied to the EAM.

Figure 5(a) shows a representative eye diagram taken from the switch output in nonreturn-to-zero (NRZ) format at 3.5 Gb/s, during the basic switch operation depicted in Fig. 2(a). In this eye diagram the extinction ratio is >10 dB for an absorbed optical power of ~10 mW. The inset shows the eye diagram of the NRZ data at the input. In this representative optical wavelength conversion, the input wavelength is λ 1= 1551.7 nm and the output wavelength is λ 2= 1548.5 nm.

Fig. 5. Eye diagrams of optical outputs from the integrated switch. (a) Optical wavelength conversion (from 1551.7 nm to 1548.5 nm) at 3.5 Gb/s with >10 dB extinction ratio; inset shows the input NRZ eye diagram (50 ps/div horizontal and 185 μW/div vertical; inset: 50 ps/div horizontal and 344 μW/div vertical), (b) Electrical gating for packet switching of 1 Gb/s optical wavelength conversion (from 1551.7 nm to 1535.8 nm) at 62.5 MHz within a reconfiguration time of < 2.5 ns; inset shows the optical input (blue) and the output transient (red) of switch reconfiguration (5 ns/div horizontal and 73 μW/div vertical; inset: 1 ns/div horizontal and 5 8 μW/div vertical), (c) Optical gating for packet switching of 3 Gb/s optical pulse train (@ 1550 nm) with an optical CNMS signal (@ 1551.7 nm) at 187.5 MHz within a reconfiguration time of <300 ps; inset shows the optical data input (blue) and the output transient (red) of switch reconfiguration (1 ns/div horizontal and 270 μW/div vertical; inset: 200 ps/div horizontal and 135 μW/div vertical), and (d) Optical packet switching of 1 Gb/s wavelength conversion (from 1551.7 nm to 1539.2 nm) with an optical CNMS signal (@ 1547.3 nm) at 62.5 MHz within a reconfiguration time of <1 ns; inset shows the output transient (5 ns/div horizontal and 63 μW/div vertical; inset: 200 ps/div horizontal and 63 μW/div vertical).

Figure 5(b) demonstrates the electrical gating for packet switching discussed as in Fig. 2(b). The CNMS signal used here is a 62.5 MHz electronic signal with rise and fall times < 1 ns. It is generated by a pulse generator and then amplified using an RF amplifier. The output power of the amplifier is 20 dBm for a 50 Ω load, which corresponds to a ~ 6 V swing. Due to the impedance mismatch, however, the actual CNMS-generated voltage swing across the EAM is smaller. DC operating point of the EAM is optimized using a bias tee. In this configuration the EAM output at λ 2=1535.8 nm is observed with a 1 GHz square wave signal at λ 1=1551.7 nm present on the PD as test data with an average absorbed power of ~ 6 mW. The inset of Fig. 5(b) shows the transient of the electronic disabling of the switch, as well as the pulse train at the PD input. The electronic signal applied to the EAM gates the optical switching within <2.5 ns, electrically packet switching the optical wavelength conversion. Note here that for basic switch operation bypass capacitors are required to provide a local low impedance “power supply” for the high-speed currents inside the devices, effectively isolating the high-speed device operation from external parasitics. Especially for high data rates, these capacitors have to be implemented on-chip to avoid parasitics. These bypass capacitors, however, also limit the rise time of the electronic CNMS signal to be delivered to the circuit, so care has to be taken in the design of these capacitors.

Figure 5(c) shows gating for packet switching with an optical control input, corresponding to the configuration summarized in Fig. 2(c). In this configuration both the PD and the EAM are constantly reverse biased. A 3 GHz square wave signal at λ 2=1550 nm is coupled into the EAM as test data. The optical CNMS signal, a square wave at 187.5 MHz with rise and fall times of 25 ps at wavelength λ 1=1551.7, is incident on the PD with an average absorbed power of ~ 6 mW. The optical control signal at λ 1 gates the data at λ 2. The inset of Fig. 5(c) shows the transient of the switch being disabled, as well as the pulse train at the EAM input. Data transmission ceases when the optical CNMS signal disables the switch within a reconfiguration time of <300 ps.

Figure 5(d) demonstrates optically-controlled gating for packet switching together with wavelength conversion, corresponding to the configuration depicted in Fig. 2(d). In this case the PD and the EAM are constantly reverse biased. Incident on the PD are both the 1 Gb/s data stream at λ 1=1551.7 nm and the optical CNMS signal, a square wave at 62.5 MHz at λ cont=1547.3 nm with ~7 mW of total average absorbed power on the PD. A continuous-wave signal at λ 2=1539.2 nm is coupled into the EAM and the output at λ 2 is observed. The inset of Fig. 5(d) shows the transition region in more detail. When the CNMS signal becomes low, the switch is disabled within a reconfiguration time of <1 ns and no data is observed at the output. Due to the nonlinearity of the EAM, the “high” level in either one of the two signals incident on the PD is not sufficient to generate enough photocurrent to drive the EAM and enable optical transmission through it. The two-level zero signal appearing between the packets is a result of the minor absorption change in the EAM due to the presence of the data signal alone in the absence of the CNMS signal.

5. Conclusion

In summary, we present a multifunctional integrated photonic switch that incorporates a monolithically integrated, surface-normal photodiode and a quantum well electroabsorption modulator. Integrated PD-EAMs make multifunctional photonic switches that exhibit low-power, high-speed operation with high extinction ratios across a wide wavelength band (full C band). The switches provide multiple network functions on a single chip. We demonstrate both optical wavelength conversion (at 3.5 Gb/s) and electrical packet switching (in < 2.5 ns) on the same optical channel using a single switch. Alternatively an optical control signal can be used for optical packet switching in < 300 ps without wavelength conversion and in < 1 ns with wavelength conversion. Our device characterization and modeling lead us to predict the feasibility of 10 Gb/s operation, by scaling down diode capacitances and thin film resistance, and minimizing parasitics [11

11. H. V. Demir, V. A. Sabnis, O. Fidaner, J.-F. Zheng, J. S. Harris Jr., and D. A. B. Miller, “Multifunctional Integrated Photonic Switches,” IEEE J. Sel. Top. Quantum Electron. 11, 86–96 (2005). [CrossRef]

].

Acknowledgments

The authors acknowledge Intel Corporation for the research funding, Dr. Jasper Hanberg of Intel GIGA ApS and OEpic Inc. for the epitaxial wafer growth, PTAP (funded by DARPA and NSF) for additional support and Thorlabs Inc. for the waveguide alignment setup. O. Fidaner also acknowledges Lucent Technologies Stanford Graduate Fellowship.

References and links

1.

M.L. Mašanovic, V. Lal, J.A. Summers, J.S. Barton, E.J. Skogen, L.G. Rau, L.A. Coldren, and D.J. Blumenthal, “Widely tunable monolithically integrated all-optical wavelength converters in InP,” J. Lightwave Technol. 23, 1350–1362 (2005). [CrossRef]

2.

J.M. Hutchinson, J. Zheng, J.S. Barton, J.A. Henness, M.L. Mašanovic, M.N. Sysak, L.A. Johansson, D.J. Blumenthal, L.A. Coldren, H.V. Demir, V.A. Sabnis, O. Fidaner, J.S. Harris, and D.A.B. Miller, “Indium Phosphide-Based Optoelectronic Wavelength Conversion for High-Speed Optical Networks,” Intel Technology Journal 8, 161–171 (2004).

3.

S. Kodama, T. Yoshimatsu, and H. Ito, “500 Gbit/s optical gate monolithically integrating photodiode and electroabsorption modulator,” Electron. Lett. 40, 555–556 (2004). [CrossRef]

4.

S.J.B. Yoo, “Advanced Optical Components for Next Generation Photonic Networks,” Proc. SPIE 5246, 224–234 (2003). [CrossRef]

5.

E. S. Awad, P. S. Cho, C. Richardson, N. Moulton, and J. Goldhar, ”Optical 3R regeneration using a single EAM for all-optical timing extraction with simultaneous reshaping and wavelength conversion,” IEEE Photonics. Technol. Lett. 14, 1378–1380 (2002). [CrossRef]

6.

T. Otani, T. Miyazaki, and S. Yamamoto, “Optical 3R regenerator using wavelength converters based on electroabsorption modulator for all-optical network applications,” IEEE Photonics. Technol. Lett. 12, 431–433 (2000). [CrossRef]

7.

M. Hayashi, H. Tanaka, K. Ohara, T. Otani, and M. Suzuki, “OTDM Transmitter Using WDM-TDM Conversion With an Electroabsorption Wavelength Converter,” J. Lightwave Technol. 20, 236–242 (2002). [CrossRef]

8.

C. Satoet al., “High-speed waveguide switches for optical packet-switched routers and networks,” OFC, paper MF53, Los Angeles, CA, (2004). [CrossRef]

9.

H. V. Demir, V. A. Sabnis, J.-F. Zheng, O. Fidaner, J. S. Harris Jr., and D. A. B. Miller, “Scalable wavelength-converting crossbar switches,” IEEE Photonics. Technol. Lett. 16, 2305–2307 (2004). [CrossRef]

10.

H. V. Demir, V. A. Sabnis, O. Fidaner, J. S. Harris Jr., D. A. B. Miller, and J. Zheng, “Dual-diode quantum-well modulator for C-band wavelength conversion and broadcasting,” Opt. Express 12, 310–316 (2004). [CrossRef] [PubMed]

11.

H. V. Demir, V. A. Sabnis, O. Fidaner, J.-F. Zheng, J. S. Harris Jr., and D. A. B. Miller, “Multifunctional Integrated Photonic Switches,” IEEE J. Sel. Top. Quantum Electron. 11, 86–96 (2005). [CrossRef]

12.

O. Fidaner, H. V. Demir, V. A. Sabnis, J. S. Harris Jr., D. A. B. Miller, and J.-F. Zheng, “Electrically-reconfigurable multifunctional integrated phonic switches,” The 17th Annual Meeting of the IEEE LEOS Nov. 8-9, 2004 . 2, 455 – 456 (2004).

13.

O. Fidaner, H. V. Demir, V. A. Sabnis, J. S. Harris Jr., D. A. B. Miller, and J.-F. Zheng, “Multifunctional integrated photonic switches for nanosecond packet-switched wavelength conversion,” Integrated Photonics Research (IPR) (OS A Technical Digest, Optical Society of America, San Diego, CA, 2005).

14.

V. A. Sabnis, H. V. Demir, O. Fidaner, J. S. Harris Jr., D. A. B. Miller, J.-F. Zheng, N. Li, T.-C. Wu, and Y.-M. Houng. “Optically-switched dual-diode electroabsorption modulators,” Integrated Photonics Research (IPR) (OS A Technical Digest, Optical Society of America, Washington, DC, 2003).

15.

H. V. Demir, J.-F. Zheng, V. A. Sabnis, O. Fidaner, J. P. Hanberg, J. S. Harris Jr., and D. A. B. Miller, “Self-aligning planarization and passivation in the integration of III-V semiconductor devices,” IEEE Trans. on Semiconductor Manufacturing 18, 182 – 189 (2005). [CrossRef]

16.

J.-F. Zheng, J. P. Hanberg, H. V. Demir, V. A. Sabnis, O. Fidaner, J. S. Harris Jr., and D. A. B. Miller, “Novel passivation and planarization in the integration of III-V semiconductor devices,” Proceedings of SPIE Photonics West Conference, San Jose, CA (January 24-29, 2004). Paper 5356-9.

17.

V. A. Sabnis, H. V. Demir, O. Fidaner, J. S. Harris Jr., D. A. B. Miller, J.-F. Zheng, N. Li, T.-C. Wu, H.-T. Chen, and Y.-M. Houng, “Optically-controlled electroabsorption modulators for unconstrained wavelength conversion,” Appl. Phys. Lett. 84, 469–471 (2004). [CrossRef]

OCIS Codes
(130.0250) Integrated optics : Optoelectronics
(130.3120) Integrated optics : Integrated optics devices
(230.4110) Optical devices : Modulators
(230.5590) Optical devices : Quantum-well, -wire and -dot devices
(250.3140) Optoelectronics : Integrated optoelectronic circuits

ToC Category:
Optoelectronics

Citation
Onur Fidaner, Hilmi Volkan Demir, Vijit A. Sabnis, Jun-Fei Zheng, James S. Harris, Jr., and David A. B. Miller, "Integrated photonic switches for nanosecond packet-switched optical wavelength conversion," Opt. Express 14, 361-368 (2006)
http://www.opticsinfobase.org/oe/abstract.cfm?URI=oe-14-1-361


Sort:  Journal  |  Reset  

References

  1. M. L. Mašanovic, V. Lal, J. A. Summers, J. S. Barton, E. J. Skogen, L. G. Rau, L. A. Coldren, and D. J. Blumenthal, "Widely tunable monolithically integrated all-optical wavelength converters in InP," J. Lightwave Technol. 23, 1350-1362 (2005). [CrossRef]
  2. J. M. Hutchinson, J. Zheng, J. S. Barton, J. A. Henness, M. L. Mašanovic, M. N. Sysak, L. A. Johansson, D. J. Blumenthal, L. A. Coldren, H. V. Demir, V. A. Sabnis, O. Fidaner, J. S. Harris, and D. A. B. Miller, "Indium Phosphide-based optoelectronic wavelength conversion for high-speed optical networks," Intel Technology Journal 8, 161-171 (2004).
  3. S. Kodama, T. Yoshimatsu, and H. Ito, "500 Gbit/s optical gate monolithically integrating photodiode and electroabsorption modulator," Electron. Lett. 40, 555-556 (2004). [CrossRef]
  4. S. J. B. Yoo, "Advanced optical components for next generation photonic networks," Proc. SPIE 5246, 224-234 (2003). [CrossRef]
  5. E. S. Awad, P. S. Cho, C. Richardson, N. Moulton, and J. Goldhar, "Optical 3R regeneration using a single EAM for all-optical timing extraction with simultaneous reshaping and wavelength conversion," IEEE Photonics. Technol. Lett. 14, 1378-1380 (2002). [CrossRef]
  6. T. Otani, T. Miyazaki, and S. Yamamoto, "Optical 3R regenerator using wavelength converters based on electroabsorption modulator for all-optical network applications," IEEE Photonics. Technol. Lett. 12, 431-433 (2000). [CrossRef]
  7. M. Hayashi, H. Tanaka, K. Ohara, T. Otani, and M. Suzuki, "OTDM transmitter using WDM-TDM conversion with an electroabsorption wavelength converter," J. Lightwave Technol. 20, 236-242 (2002). [CrossRef]
  8. C. Sato et al., "High-speed waveguide switches for optical packet-switched routers and networks," OFC, paper MF53, Los Angeles, CA, (2004). [CrossRef]
  9. H. V. Demir, V. A. Sabnis, J.-F. Zheng, O. Fidaner, J. S. Harris, Jr., and D. A. B. Miller, "Scalable wavelength converting crossbar switches," IEEE Photonics. Technol. Lett. 16, 2305-2307 (2004). [CrossRef]
  10. H. V. Demir, V. A. Sabnis, O. Fidaner, J. S. Harris, Jr., D. A. B. Miller, and J. Zheng, "Dual-diode quantum well modulator for C-band wavelength conversion and broadcasting," Opt. Express 12, 310-316 (2004) <a href= http://www.opticsexpress.org/abstract.cfm?URI=OPEX-12-2-310>http://www.opticsexpress.org/abstract.cfm?URI=OPEX-12-2-310</a>. [CrossRef] [PubMed]
  11. H. V. Demir, V. A. Sabnis, O. Fidaner, J.-F. Zheng, J. S. Harris, Jr., and D. A. B. Miller, ". H. V. Demir, V. A. Sabnis, O. Fidaner, J.-F. Zheng, J. S. Harris, Jr., and D. A. B. Miller, "Multifunctional integrated photonic switches," IEEE J. Sel. Top. Quantum Electron. 11, 86-96 (2005). [CrossRef]
  12. O. Fidaner, H. V. Demir, V. A. Sabnis, J. S. Harris, Jr., D. A. B. Miller, and J.-F. Zheng, "Electrically reconfigurable multifunctional integrated phonic switches," The 17th Annual Meeting of the IEEE LEOS Nov. 8-9, 2004. 2, 455 - 456 (2004).
  13. O. Fidaner, H. V. Demir,V. A. Sabnis, J. S. Harris Jr., D. A. B. Miller, and J.-F. Zheng, "Multifunctional integrated photonic switches for nanosecond packet-switched wavelength conversion," Integrated Photonics Research (IPR) (OSA Technical Digest, Optical Society of America, San Diego, CA, 2005).
  14. V. A. Sabnis, H. V. Demir, O. Fidaner, J. S. Harris, Jr., D. A. B. Miller, J.-F. Zheng, N. Li, T.-C. Wu, and Y.-M. Houng. "Optically-switched dual-diode electroabsorption modulators," Integrated Photonics Research (IPR) (OSA Technical Digest, Optical Society of America, Washington, DC, 2003).
  15. H. V. Demir, J.-F. Zheng, V. A. Sabnis, O. Fidaner, J. P. Hanberg, J. S. Harris, Jr., and D. A. B. Miller, "Self-aligning planarization and passivation in the integration of III-V semiconductor devices," IEEE Trans. on Semiconductor Manufacturing 18, 182-189 (2005). [CrossRef]
  16. J.-F. Zheng, J. P. Hanberg, H. V. Demir, V. A. Sabnis, O. Fidaner, J. S. Harris, Jr., and D. A. B. Miller, "Novel passivation and planarization in the integration of III-V semiconductor devices," Proceedings of SPIE Photonics West Conference, San Jose, CA (January 24-29, 2004). Paper 5356-9.
  17. V. A. Sabnis, H. V. Demir, O. Fidaner, J. S. Harris, Jr., D. A. B. Miller, J.-F. Zheng, N. Li, T.-C. Wu, H.-T. Chen, and Y.-M. Houng, "Optically-controlled electroabsorption modulators for unconstrained wavelength conversion," Appl. Phys. Lett. 84, 469-471 (2004). [CrossRef]

Cited By

Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.


« Previous Article  |  Next Article »

OSA is a member of CrossRef.

CrossCheck Deposited