OSA's Digital Library

Optics Express

Optics Express

  • Editor: Michael Duncan
  • Vol. 14, Iss. 24 — Nov. 27, 2006
  • pp: 11839–11847
« Show journal navigation

Ultrahigh-speed all-optical half adder based on four-wave mixing in semiconductor optical amplifier

Li Pei-li, Huang De-xiu, Zhang Xin-liang, and Zhu Guang-xi  »View Author Affiliations


Optics Express, Vol. 14, Issue 24, pp. 11839-11847 (2006)
http://dx.doi.org/10.1364/OE.14.011839


View Full Text Article

Acrobat PDF (345 KB)





Browse Journals / Lookup Meetings

Browse by Journal and Year


   


Lookup Conference Papers

Close Browse Journals / Lookup Meetings

Article Tools

Share
Citations

Abstract

A novel scheme for an ultrahigh-speed all-optical half adder based on four-wave mixing (FWM) in semiconductor optical amplifiers (SOAs) is proposed. This scheme is free of pattern effect, due to using the polarization-shift-keying (PolSK) modulation format. By numerical simulation, the output power level of logic “1” dependence on the operating conditions, such as two input signal powers, injection current, and input signal wavelength, are investigated in detail using the broad-band model of this all-optical half adder.

© 2006 Optical Society of America

1. Introduction

High-speed all-optical logic gates are crucial elements in future high-speed optical networks to perform optical signal processing functions, e.g., addressing, demultiplexing, regeneration and switching. Many approaches have been proposed to achieve all-optical logic functions, based on the nonlinear effects in semiconductor material, in optical fibers or in waveguides. In particular, all-optical logic gates based on the nonlinear effects in semiconductor optical amplifiers (SOAs), such as cross-gain modulation (XGM), cross-phase modulation (XPM), four-wave mixing (FWM), and cross-polarization modulation, are promising due to SOA’s high gain in the optical power, strong change of the refractive index and potential for photonic integration [1

1. H. J. S. Dorren, X. Yang, A.K. Mishra, Z. Li, H. Ju, H. de Waardt, G.-D. Khoe, T. Simoyama, H. Ishikawa, H. Kawashima, and T. Hasama, “All-optical logic based on ultrafast gain and index dynamics in a semiconductor optical amplifier,” IEEE J. Select. Topics in Quantum Electron. 10, 1079–1092 (2004). [CrossRef]

].

The half adder is a basis for the enhanced complex processing circuits including a full adder, a binary decoder, and a binary counter. So far, the half adders are realized using terahertz optical asymmetric demultiplexer (TOAD) [2

2. A. J. Poustie, K. J. Blow, A. E. Kelly, and R. J. Manning, “All-optical binary half-adder,” Opt. Commun. 156, 22–26 (1998). [CrossRef]

], SOAs [3

3. J. H. Kim, Y. T. Byun, Y. M. Jhon, S. L. ee, D. H. Woo, and S. H. Kim, “All-optical half adder using semiconductor optical amplifier based devices,” Opt. Commun. , 218, 345–349 (2003). [CrossRef]

, 4

4. S. H. Kim, J. H. Kim, J. W. Choi, C. W. Son, S. H. Ok, Y. T. Byun, Y. M. Jhon, S. Lee, D. Ha Woo, and S. H. Kim, “All-optical half adder using single mechanism of XGM in semiconductor optical amplifiers,” in Semiconductor Lasers and Applications IIJ. Yao, Y. J. Chen, and S. Lee, eds., Proc. SPIE5628, 94–101 (2005). [CrossRef]

], ultrafast nonlinear interferometers (UNI) [5

5. D. Tsiokos, E. Kehayas, K. Vyrsokinos, T. Houbavlis, L. Stampoulidis, G. T. Kanellos, N. Pleros, G. Guekos, and H. Avramopoulos. “10-Gb/s all-optical half-adder with interferometric SOA gates,” IEEE Photon. Technol. Lett. 16, 284–286 (2004). [CrossRef]

], and using a PPLN waveguide and an SOA [6

6. S. Kumar, D. Gurkan, and A. E. Willner, “All-optical half adder using a PPLN waveguide and an SOA,” OFC 2004 , 1, 23–27 (2004).

].

In this paper, a novel scheme for an ultrahigh-speed all-optical half adder based on FWM in SOA is proposed. The polarization-shift-keying (PolSK) modulation format is used in this scheme. Many studies on the PolSK modulation format have been carried out [7–11

7. Z. Li and G. Li, “Ultrahigh-speed reconfigurable logic gates based on four-wave mixing in a semiconductor optical amplifier,” IEEE Photon. Technol. Lett. 18, 1341–1343 (2006). [CrossRef]

] due to its unique virtues. Extinction ratio and signal to noise ratio using PolSK modulation are superior to using intensity modulation [9

9. R. Calvani, R. Caponi, and F. Cisternino, “Polarization phase-shift keying: A coherent transmission technique with differential Heterodyne detection,” Electron. Lett. 24, 642–643 (1988). [CrossRef]

]. PolSK modulation is less sensitive to phase noise of the transmitting lasers in comparison with other coherent transmission schemes [10

10. S. Benedetto, R. Gaudino, and P. Poggiolini, “Performance of coherent optical polarization shift keying modulation in the presence of phase noise,” IEEE Trans. Commun. 43, 1603–1612 (1995). [CrossRef]

]. Due to the constant intensity nature of the signal, pattern-dependent degradation can be reduced in this SOA-based device [11

11. S. Benedetto and P. Poggiolini, “Theory of polarization shift keying modulation,” IEEE Trans. Commun. 40, 708–721 (1992). [CrossRef]

]. Moreover, since the FWM effect is used, this scheme can provide ultrafast operation. The effects of two input signal powers, injection current, and input signal wavelength on the crucial parameter of half adder, the output power level of logic “1”, are investigated by numerical simulation in this paper.

2. Operation principle

The half adder is a combinational optical logic unit utilizing two logic functions SUM and CARRY. The truth table for the half adder is shown in Table 1. In fact, logic SUM and logic CARRY exactly coincide with the XOR gate and the AND gate. So the all-optical XOR and AND gates should be employed to implement the half adder. The logic diagram of the half adder is shown in Fig. 1.

Table 1. Truth Table of Half Adder

table-icon
View This Table
| View All Tables
Fig. 1. The basic logic diagram of the half adder

Figure 2 shows the schematic diagram of the proposed all-optical half adder. To implement the all-optical half adder, the FWM effects for PolSK signals in two SOAs are used. In PolSK encoding, a logical “1” is associated with a given linear polarization state and a “0” with the orthogonal state. Two strong PolSK signals (S1 and S2) are split using optical coupler (OC) 1 and OC2, respectively. A polarization controller (PC) is used to control the relative polarization state between two signals. After applying a quarter-wave plate in one arm of signal 2 to produce a 90° polarization rotation, the split signals are across coupled into two SOAs, in which the FWM effects occur. It is well known that the FWM effect in an SOA only arises from beating between the same polarizations components of two input signals. Consequently, the generated FWM components (the conjugate signal and the satellite signal) possess the same polarization state as two input signals. In the upper SOA, when two signals are both logic “1”, the resulting intensity and polarization state of the conjugate signal can be obtained. By filtering the conjugate signal and isolating its two polarization components using tunable filter (TF) 1 and polarization beam splitter (PBS) respectively, AND gate can be realized (in fact, NOR gate can be simultaneously obtained from the other PBS output). In the lower SOA, the conjugate signal is generated by FWM between S1 and S2(rotated 90° polarization state). An optical XOR gate can be obtained by directly detecting the intensity of conjugate signal, as shown in Fig. 2. Thus logic SUM and CARRY are simultaneously implemented to realize all-optical half adder.

Fig. 2. Schematic diagram of the all-optical half adder

3. Model

In our simulations, we assume the used SOAs are polarization independent. SOA is divided into n subsections along the longitudinal direction. When n is sufficiently large, the carrier density in each subsection is considered uniform. The traveling wave equations of two signals, conjugate signal, and satellite signal in subsection i can be expressed as [12

12. N. C. Kothari and Daniel J. Blumenthal, “Influence of gain saturation, gain asymmetry, and pump/probe depletion on wavelength conversion efficiency of FWM in semiconductor optical amplifiers,” IEEE J. Quantum Electron. 32, 1810–1816 (1996). [CrossRef]

,13

13. H. Simos, A. Bogris, and D. Syvridis, “Investigation of a 2R all-optical regenerator based on four-wave mixing in a semiconductor optical amplifier,” J. Lightwave Technol. 22, 595–604 (2004). [CrossRef]

]

dAs1,idz=12[Γgs1,i1+PiPs(1iαi)αl]As1,iΓgs1,i2(1+PiPs)(ηs1,s2As2,i2+ηs1,cAc,i2+ηs1,satAsat,i2)As1,i
Γgs1,i2(1+PiPs)[(ηs2,s1+ηc,s1)As2,iAc,iAs1,i*+ηs2,satAs2,i2Asat,i*]
(1)
dAs2,idz=12[Γgs2,i1+PiPs(1iαi)αl]As2,iΓgs2,i2(1+PiPs)(ηs2,s1As1,i2+ηs2,cAc,i2+ηs2,satAsat,i2)As2,i
Γgs2,i2(1+PiPs)[(ηs1,s2+ηsat,s2)As1,iAsat,iAs2,i*+ηs1,cAs1,i2Ac,i*]
(2)
dAc,idz=12[Γgc,i1+PiPs(1iαi)αl]Ac,iΓgc,i2(1+PiPs)(ηc,s1As1,i2+ηc,s2As2,i2+ηc,satAsat,i2)Ac,i
Γgc,i2(1+PiPs)[(ηs2,sat+ηs1,sat)As1,iAs2,iAsat,i*+ηs1,s2As1,i2As2,i*]
(3)
dAsat,idz=12[Γgsat,i1+PiPs(1iαi)αl]Asat,iΓgsat,i2(1+PiPs)(ηsat,s1As1,i2+ηsat,s2As2,i2+ηsat,cAc,i2)Asat,i
Γgsat,i2(1+PiPs)[(ηs2,c+ηs1,c)As1,iAs2,iAc,i*+ηs2,s1As2,i2As1,i*]
(4)

where A is the normalized slowly varying envelope of the light field, Pi=jAj,i2 is the total optical power inside i subsection, Γ is mode confinement factor, α is the linewidth enhancement factor, αl is the loss of SOA, Psat is saturation power, the coefficients ηjj′, jj′, j=s1, s2,c,sat represent the nonlinear interactions among the mixing waves [13

13. H. Simos, A. Bogris, and D. Syvridis, “Investigation of a 2R all-optical regenerator based on four-wave mixing in a semiconductor optical amplifier,” J. Lightwave Technol. 22, 595–604 (2004). [CrossRef]

].

gj,i(N) is the material gain coefficient of the SOA and can be expressed as [14

14. B. Mikkelson, “Optical amplifier and their system applications,” Ph.D dissertation, Denmark Univ. Technol.163–164 (1994).

]

g(v,N)=e2M24π2ε0m02cngv(8π2mcmhhh2(mc+mhh))32(hvEg)12[fc(v)+fv(v)1]
(5)

where N is the carrier density, e is the electron charge, h is Planck constant, ε 0 is the vacuum permittivity, m 0 is the free-electron mass, mc is the conduction band electron mass, mhh is the effective mass of a heavy hole in the valence band, c is the speed of light in vacuum, ng is the refractive index, Δ is the spin-orbit splitting, |M|2 is momentum matrix element, Eg is the band gap energy, fc and fv are the Fermi-Dirac distributions for the conduction and valence bands, respectively.

To calculate the amplified spontaneous emission (ASE) spectrum, the whole spontaneous emission spectrum is divided into m segments. The traveling wave equations for the ASE spectrum in the wavelength between λ j-1 and λj can be expressed as [15

15. G. Talli and M. J. Adams, “Amplified spontaneous emission in semiconductor optical amplifiers: modeling and experiments,” Opt. Commun. 218, 161–166 (2003). [CrossRef]

]

±dWj,i±(z,t)dz=[Γgj,i(N)αl]Wj,i±(z,t)+Γgj,ihc2λj3
(6)

where Wj,i(z,t) is the power spectrum density, gj,i′ is the stimulated emission rate per unit length of the SOA and is given by

g(v,N)=e2M24π2ε0m02cnav(8π2mrh2)32(hvEg)12fc(v)fv(v)
(7)

The carrier density in subsection i can be described by the rate equation

dNidt=IewdL(c1Ni+c2Ni2+c3Ni3)j=s1,s2,c,satgj,iGj,i1lnGj,iAj,i2λjhcwd
j=1mgj,i[2gj,ig¯j,i(Gj,i1lnGj,i1)+Gj,i1lnGj,iΔλ(Wj,i++Wj,i)λjhcwd]
(8)

where I is the injection current, wdL is the volume of the active region, c 1 is the Nonradiative recombination coefficient, c 2 is the bimolecular recombination coefficient, c 3 is the Auger recombination coefficient. Gj,i=exp(j,iΔl) is the gain of the subsection i. The third and fourth terms on the right-hand side are carrier consumption induced by the stimulated emission for the signals, conjugate signal, satellite signal, and the ASE.

4. Simulation and results

The parameters used in our simulation are summarized in Table 2.

Table 2. Parameter used in simulation

table-icon
View This Table
| View All Tables

In the simulations, the return-to-zero (RZ)-PolSK bit sequences have been used for two input signals at repetition rates of 40Gb/s with a pulse duration equal to T/4, where T is the repetition period. This scheme for all-optical half adder makes no matter to apply to the higher data rate. The peak powers of two input signals are both 15mW. The wavelengths are 1550nm and 1551nm. The correspondence wavelengths of the conjugate and satellite signals are 1549nm and 1552nm, respectively. The other parameters are reported in [16

16. P. L. Li, D. X. Huang, X. L. Zhang, and G. X. Zhu, “Novel all-optical AND and NOR Gates based on semiconductor fiber ring laser,” Acta Physica Sinica , 56, (2007) (to be published).

].

Figure 3 shows the simulation results of this kind of all-optical half adder. Figure 3(a) and 3(b) are the intensity waveforms for the given polarization states of signal 1 and signal 2, respectively. The corresponding RZ-PolSK bit sequences are “11001011000101011001” and “01110000111110110010” for two input signals. The demodulated bit sequences in Fig. 3(c) and 3(d) are “01000000000100010000” and “10111011111011101011”. They are just the AND and the XOR between two input signals. The logic SUM and logic CARRY of half adder exactly coincide with the XOR gate and the AND gate. Therefore all-optical half adder can be achieved using this scheme.

From the output waveforms of this proposed all-optical half adder, we can find that, although two SOAs are in deep saturation region, due to the constant envelope of the PolSK signal, pattern effect almost can’t be observed.

Fig. 3. Intensity waveform for (a) the input signal 1, (b) the input signal 2, (c) the logic AND output, and (d) the logic XOR output.

In a half adder, the output power level of logic “1” is a crucial parameter for evaluating the logic performance. Improving this parameter is essential for a low bit-error rate operation of half adder. As mentioned earlier, in this scheme, the AND and XOR functions are realized by filtering two conjugate signals of FWM respectively. So the powers of two input signals need not be equal. Thus, the effects of the input signal powers on the output power level of logic “1” are investigated by numerical simulation.

Figure 4 shows the output power level of logic “1” of the AND and XOR logic gates as a function of input signal 2 power, whilst keeping all other operating parameters constant. The conjugate signal power is changed by interaction between input powers and gain saturation. With increasing the input signal 2 powers, the conjugate signal powers are increased, because it is proportional to gain and the power of signal 2. However, with further increase of signal 2 power, the conjugate signal power is decreased due to SOA being in strong gain saturation region. So the output power level of logic “1” of the AND and XOR logic gates first increases then decreases as the input signal 2 increases.

Fig. 4. Output power level of logic “1” of AND gate and XOR gate for different powers of the input signal 2

Figure 5 shows the output power level of logic “1” of the AND and XOR logic gates versus input signal 1 power. It is clearly seen that, with the signal 1 power increasing from 2mW to 30mW, the output power level of logic “1” of half adder increases first quickly then slowly, but not decreases. This is attributed to the fact that the output power of the conjugate signal is proportional to the square of signal 1 power, whereas proportional to the signal 2 power. So the effect of signal 1 on conjugate signals is larger than signal 2. Therefore, when the signal 2 power reaches 30mW, although SOA is already in strong gain saturation region, the output power level of logic “1” is still not decreased. In our simulation, when the peak power of input signal 1 exceeds 80mW, the output power level of logic “1” begins to decrease. But, in general, too large input signal power cannot be used.

Fig. 5. Output power level of logic “1” of AND gate and XOR gate for different input signal 1 powers

Fig. 6. Output power level of logic “1” of AND gate and XOR gate as a function of injection current

The effect of the input signal 2 wavelength positions relative to the input signal 1 wavelength is also investigated. In our simulations, the input signal 1 wavelength is 1550nm. Figure 7 shows the output power level of logic “1” of AND gate and XOR gate as a function of signal 2 wavelength. It can be seen that the output powers of the logic “1” is decreased with the increase of the detuning frequency. This is mostly because the frequency response of nonlinear process deceases as the detuning frequency increases.

Fig. 7. Output power level of logic “1” of AND gate and XOR gate as a function of input signal 2 wavelength

5. Conclusion

A novel ultrahigh-speed half adder for PloSK modulator format based on FWM in SOAs is proposed. By numerical simulation, the output power level of logic “1”, a crucial parameter of the all-optical half adder, is investigated. The results indicate that, due to using the PolSK modulation format, pattern effect can not existent. In general power range, higher input signal 1 power can increase the output power level of logic “1”. As the input signal 2 increases, the output power level of logic “1” of this kind of half adder first increases then decreases, so the input signal 2 power should be optimized. High injection current improves the output power level of logic “1”. However it can’t be too high. The output power level of logic “1” is decreased as the frequency detuning between two input signals. Therefore the frequency detuning should be set small.

Acknowledgments

Related researches are supported by National Natural Science Foundation (Grant No.60407001) the Program for New Century Excellent Talents in University of Ministry of Education (NCET-04-0715), and the National Science Foundation for Post-doctoral Scientists of China.

References and links

1.

H. J. S. Dorren, X. Yang, A.K. Mishra, Z. Li, H. Ju, H. de Waardt, G.-D. Khoe, T. Simoyama, H. Ishikawa, H. Kawashima, and T. Hasama, “All-optical logic based on ultrafast gain and index dynamics in a semiconductor optical amplifier,” IEEE J. Select. Topics in Quantum Electron. 10, 1079–1092 (2004). [CrossRef]

2.

A. J. Poustie, K. J. Blow, A. E. Kelly, and R. J. Manning, “All-optical binary half-adder,” Opt. Commun. 156, 22–26 (1998). [CrossRef]

3.

J. H. Kim, Y. T. Byun, Y. M. Jhon, S. L. ee, D. H. Woo, and S. H. Kim, “All-optical half adder using semiconductor optical amplifier based devices,” Opt. Commun. , 218, 345–349 (2003). [CrossRef]

4.

S. H. Kim, J. H. Kim, J. W. Choi, C. W. Son, S. H. Ok, Y. T. Byun, Y. M. Jhon, S. Lee, D. Ha Woo, and S. H. Kim, “All-optical half adder using single mechanism of XGM in semiconductor optical amplifiers,” in Semiconductor Lasers and Applications IIJ. Yao, Y. J. Chen, and S. Lee, eds., Proc. SPIE5628, 94–101 (2005). [CrossRef]

5.

D. Tsiokos, E. Kehayas, K. Vyrsokinos, T. Houbavlis, L. Stampoulidis, G. T. Kanellos, N. Pleros, G. Guekos, and H. Avramopoulos. “10-Gb/s all-optical half-adder with interferometric SOA gates,” IEEE Photon. Technol. Lett. 16, 284–286 (2004). [CrossRef]

6.

S. Kumar, D. Gurkan, and A. E. Willner, “All-optical half adder using a PPLN waveguide and an SOA,” OFC 2004 , 1, 23–27 (2004).

7.

Z. Li and G. Li, “Ultrahigh-speed reconfigurable logic gates based on four-wave mixing in a semiconductor optical amplifier,” IEEE Photon. Technol. Lett. 18, 1341–1343 (2006). [CrossRef]

8.

M. M. Matalgah and R. M. Radaydeh, “Hybrid frequency-polarization shift-keying modulation for optical transmission,” J. Lightwave Technol. 23, 1152–1163 (2005). [CrossRef]

9.

R. Calvani, R. Caponi, and F. Cisternino, “Polarization phase-shift keying: A coherent transmission technique with differential Heterodyne detection,” Electron. Lett. 24, 642–643 (1988). [CrossRef]

10.

S. Benedetto, R. Gaudino, and P. Poggiolini, “Performance of coherent optical polarization shift keying modulation in the presence of phase noise,” IEEE Trans. Commun. 43, 1603–1612 (1995). [CrossRef]

11.

S. Benedetto and P. Poggiolini, “Theory of polarization shift keying modulation,” IEEE Trans. Commun. 40, 708–721 (1992). [CrossRef]

12.

N. C. Kothari and Daniel J. Blumenthal, “Influence of gain saturation, gain asymmetry, and pump/probe depletion on wavelength conversion efficiency of FWM in semiconductor optical amplifiers,” IEEE J. Quantum Electron. 32, 1810–1816 (1996). [CrossRef]

13.

H. Simos, A. Bogris, and D. Syvridis, “Investigation of a 2R all-optical regenerator based on four-wave mixing in a semiconductor optical amplifier,” J. Lightwave Technol. 22, 595–604 (2004). [CrossRef]

14.

B. Mikkelson, “Optical amplifier and their system applications,” Ph.D dissertation, Denmark Univ. Technol.163–164 (1994).

15.

G. Talli and M. J. Adams, “Amplified spontaneous emission in semiconductor optical amplifiers: modeling and experiments,” Opt. Commun. 218, 161–166 (2003). [CrossRef]

16.

P. L. Li, D. X. Huang, X. L. Zhang, and G. X. Zhu, “Novel all-optical AND and NOR Gates based on semiconductor fiber ring laser,” Acta Physica Sinica , 56, (2007) (to be published).

OCIS Codes
(190.4380) Nonlinear optics : Nonlinear optics, four-wave mixing
(200.3760) Optics in computing : Logic-based optical processing
(250.5980) Optoelectronics : Semiconductor optical amplifiers

ToC Category:
Optoelectronics

History
Original Manuscript: September 20, 2006
Revised Manuscript: October 30, 2006
Manuscript Accepted: October 31, 2006
Published: November 27, 2006

Citation
Pei-li Li, De-xiu Huang, Xin-liang Zhang, and Guang-xi Zhu, "Ultrahigh-speed all-optical half adder based on four-wave mixing in semiconductor optical amplifier," Opt. Express 14, 11839-11847 (2006)
http://www.opticsinfobase.org/oe/abstract.cfm?URI=oe-14-24-11839


Sort:  Author  |  Year  |  Journal  |  Reset  

References

  1. H. J. S. Dorren, X. Yang, A.K. Mishra, Z. Li, H. Ju, H. de Waardt, G.-D. Khoe, T. Simoyama, H. Ishikawa, H. Kawashima, and T. Hasama, "All-optical logic based on ultrafast gain and index dynamics in a semiconductor optical amplifier," IEEE J. Select.Topics in Quantum Electron. 10, 1079-1092 (2004). [CrossRef]
  2. A. J. Poustie, K. J. Blow, A. E. Kelly, and R. J. Manning, "All-optical binary half-adder," Opt. Commun. 156, 22-26 (1998). [CrossRef]
  3. J. H. Kim, Y. T. Byun, Y. M. Jhon, S. L.ee, D. H. Woo, and S. H. Kim, "All-optical half adder using semiconductor optical amplifier based devices," Opt. Commun.,  218, 345-349 (2003). [CrossRef]
  4. S. H. Kim, J. H. Kim, J. W. Choi, C. W. Son, S. H. Ok, Y. T. Byun, Y. M. Jhon, S. Lee, D. Ha Woo, and S. H. Kim, "All-optical half adder using single mechanism of XGM in semiconductor optical amplifiers," in Semiconductor Lasers and Applications II J. Yao, Y. J. Chen, and S. Lee, eds., Proc. SPIE 5628, 94-101 (2005). [CrossRef]
  5. D. Tsiokos, E. Kehayas, K. Vyrsokinos, T. Houbavlis, L. Stampoulidis, G. T. Kanellos, N. Pleros, G. Guekos, and H. Avramopoulos. "10-Gb/s all-optical half-adder with interferometric SOA gates," IEEE Photon. Technol. Lett. 16, 284-286 (2004). [CrossRef]
  6. S. Kumar, D. Gurkan, and A. E. Willner, "All-optical half adder using a PPLN waveguide and an SOA," in Optical Fiber Communication Conference, Technical Digest (CD) (Optical Society of America, 2004), paper WN2 (2004). http://www.opticsinfobase.org/abstract.cfm?URI=OFC-2004-WN2.
  7. Z. Li, and G. Li, "Ultrahigh-speed reconfigurable logic gates based on four-wave mixing in a semiconductor optical amplifier," IEEE Photon. Technol. Lett. 18, 1341-1343 (2006). [CrossRef]
  8. M. M. Matalgah, and R. M. Radaydeh, "Hybrid frequency-polarization shift-keying modulation for optical transmission," J. Lightwave Technol. 23, 1152-1163 (2005). [CrossRef]
  9. R. Calvani, R. Caponi, and F. Cisternino, "Polarization phase-shift keying: A coherent transmission technique with differential Heterodyne detection," Electron. Lett. 24, 642-643 (1988). [CrossRef]
  10. S. Benedetto, R. Gaudino, and P. Poggiolini, "Performance of coherent optical polarization shift keying modulation in the presence of phase noise," IEEE Trans. Commun. 43, 1603-1612 (1995). [CrossRef]
  11. S. Benedetto, and P. Poggiolini, "Theory of polarization shift keying modulation," IEEE Trans. Commun. 40, 708-721 (1992). [CrossRef]
  12. N. C. Kothari, and DanielJ. Blumenthal, "Influence of gain saturation, gain asymmetry, and pump/probe depletion on wavelength conversion efficiency of FWM in semiconductor optical amplifiers," IEEE J. Quantum Electron. 32, 1810-1816 (1996). [CrossRef]
  13. H. Simos, A. Bogris, and D. Syvridis, "Investigation of a 2R all-optical regenerator based on four-wave mixing in a semiconductor optical amplifier," J. Lightwave Technol. 22, 595-604 (2004). [CrossRef]
  14. B. Mikkelson, "Optical amplifier and their system applications," Ph.D dissertation, Denmark Univ. Technol. 163-164 (1994).
  15. G. Talli, and M. J. Adams, "Amplified spontaneous emission in semiconductor optical amplifiers: modeling and experiments," Opt. Commun. 218, 161-166 (2003). [CrossRef]
  16. P. L. Li, D. X. Huang, X. L. Zhang, and G. X. Zhu, "Novel all-optical AND and NOR Gates based on semiconductor fiber ring laser," Acta Physica Sinica,  56, (2007) (to be published).

Cited By

Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.


« Previous Article  |  Next Article »

OSA is a member of CrossRef.

CrossCheck Deposited