Lasing characteristics of InAs quantum dot microcavity lasers as a function of temperature and wavelength

doi:10.1364/OE.15.007281

« Show journal navigation

Lasing characteristics of InAs quantum dot microcavity lasers as a function of temperature and wavelength

Tian Yang, Adam Mock, John D. O'Brien, Samuel Lipson, and Dennis G. Deppe »View Author Affiliations

Optics Express, Vol. 15, Issue 12, pp. 7281-7289 (2007)
http://dx.doi.org/10.1364/OE.15.007281

View Full Text Article

Acrobat PDF (794 KB)

Journal Search
Article Lookup

Article Tools

Citations

Alert me when this article is cited
Export Citation/Save

Full Text
Article Info
References (17)
Cited By
Figures (5)
Metrics

Abstract

A Strong temperature dependence of microdisk lasers and photonic crystal nanocavity lasers with InAs quantum dot active regions is reported. These lasers operate at 1.3 μm at room temperature under optical pumping conditions. T_{0, microdisk} = 31 K. T_{0, photonic crystal nanocavity} = 14 K. The lasing threshold dependence on the lasing wavelength is also reported. We observe a minimum absorbed threshold pump power of 9 μW. This temperature and wavelength dependent lasing behavior is explained qualitatively by a simple model which attributes the experimental observations predominantly to surface recombination at threshold and the high quality factors of these cavities.

1. Introduction

Microcavity lasers with InAs quantum dot (QD) active regions combine the high quality factor (Q) small volume (V) optical modes of the cavities with the discrete and narrow gain profile of the quantum dots. They are promising candidates for high speed, low power devices in high density photonic integrated circuits [1

M. Sugawara, “Self-assembled InGaAs/GaAs quantum dots,” in Semiconductors and Semimetals , vol. 60. (Academic, 1999).

Y. Masumoto and T. Takagahara, Semiconductor quantum dots : physics, spectroscopy, and applications (Springer, 2002).

]. In this paper, we report the characterization and modeling of the room temperature lasing behavior of InAs QD microdisk lasers and photonic crystal nanocavity lasers as a function of temperature and wavelength. A strong temperature dependence is reported and attributed predominantly to surface recombination at threshold. The minimum absorbed threshold pump power of 9 μW for photonic crystal nanocavities is reached at a wavelength longer than that corresponding to the maximum QD density, which is possible because of the high Q values. This is the lowest room temperature threshold value reported to date for photonic crystal lasers. Our model shows that the underlying mechanisms for the temperature dependence and the wavelength dependence of these devices are closely connected.

2. Experiment

The devices were fabricated in a 180 nm thick GaAs membrane clad by 20 nm thick Al_0.25Ga_0.75As layers. The membrane contains five layers of self-assembled InAs QDs. The QD density per layer is 2-3 10¹⁰/cm². Each layer of QDs is inside a 5 nm thick In_0.15Ga_0.85As quantum well (QW). The QWs are separated by 30 nm thick GaAs barriers. Figure 1 shows the scanning electron micrographs of a microdisk cavity and a photonic crystal nanocavity. The photonic crystal cavities are formed by removing 3 holes from a triangular lattice. The two holes on both ends of each photonic crystal cavity are shifted outwards to increase the Q [3

Yoshihiro Akahane, Takashi Asano, Bong-Shik Song, and Susumu Noda, “High-Q photonic nanocavity in a two-dimensional photonic crystal,” Nature 425, 944–947 (2003). [CrossRef] [PubMed]

Fig. 1. Scanning electron micrographs of a microdisk cavity and a photonic crystal nanocavity.

The devices were optically pumped at normal incidence with an 850 nm diode laser under pulsed conditions. The pump beam was focused to a 1-1.5 μm diameter spot. Emission from the devices was collected into an optical spectrum analyzer. Experimental details on device fabrication and characterization can be found in [4

Tian Yang, Samuel Lipson, J. D. O’Brien, and D.G. Deppe, “InAs Quantum Dot Photonic Crystal Lasers and Their Temperature Dependence,” IEEE Photon. Technol. Lett. 17, 2244–2246 (2005). [CrossRef]

3. Temperature dependence of lasing behavior

To study the temperature dependence of the lasing behavior of these devices, they were mounted on a copper bar whose temperature was controlled by a thermo-electric cooler.

Figure 2(a) shows the lasing spectrum of a 3.1 μm diameter microdisk at room temperature [5

T. Yang, J. Cao, P. Lee, M. Shih, R. Shafiiha, S. Farrell, J. O’Brien, O. Shchekin, and D. Deppe, “Microdisks with quantum dot active regions lasing near 1300 nm at room temperature,” in Tech. Digest Conf. On Lasers and Electro-Optics , (Baltimore, MD, 2003), CWK3.

]. The four resonances at the wavelengths of 1254nm, 1266nm, 1302nm, and 1319 nm can be well approximated by whispering gallery modes (WGM) of TE_i+1,1, TE_i-3,2, TE_i,1, and TE_i-4,2, i = 17 ± 1 [6

R. E. Slusher, A. F. J. Levi, U. Mohideen, S. L. McCall, S. J. Pearton, and R. A. Logan, “Threshold characteristics of semiconductor microdisk lasers,” Appl. Phys. Lett. 63, 1310–1312 (1993). [CrossRef]

]. Figure 2(b) shows the output lasing power versus incident pump power characteristic of a lasing mode at 1.30 μm in a 3.2 μm diameter microdisk at varied substrate temperatures. Pumping conditions for Fig. 2(b) are 24 ns pulse widths and a 0.9% duty cycle. A characteristic temperature for the lasing threshold, T₀, of 32 K and a characteristic temperature for the lasing slope efficiency, T_η, of 65 K were extracted from these data.

Fig. 2. (a) Lasing spectrum of a 3.1 μm diameter microdisk at room temperature under pumping conditions of a 1.6 mW peak pump power, 104 ns pulse widths, and a 9.4% duty cycle. (b) Output power versus pump power characteristic of a lasing mode at 1.30 μm in a 3.2 μm diameter microdisk under varied substrate temperatures. Pumping conditions are 24 ns pulse widths and a 1% duty cycle.

Figure 3(a) shows the lasing spectrum of a photonic crystal nanocavity [4

]. The data points in Fig. 3(b) represent the output lasing power versus incident pump power characteristic of a lasing mode at 1.33 μm in a photonic crystal nanocavity at varied substrate temperatures [4

]. Pumping conditions are 16ns pulse widths and a 1% duty cycle. The photonic crystal cavities are in suspended membranes and therefore have slower heat dissipation than the microdisks supported on posts. Heating of the photonic crystal cavities by the pump light is estimated to occur at a rate of 0.19 K/ pJ during the pump pulses. This temperature increase rate was estimated by: (1) experimental observation of lasing wavelength and linewidth change with pump power and pulse width; (2) a finite difference time domain (FDTD) calculation of lasing wavelength shift with cavity temperature. This results in a 3K temperature increase within a single pump pulse of 1 mW and 16 ns. This temperature increase is comparable to the increments in substrate temperatures in Fig. 3(b) and should be considered in order to obtain characteristic temperatures. The curves in Fig. 3(b) are fitting results, where the experimental data points are fitted to the exponential temperature dependence of lasing threshold and slope efficiency. The pump heating effect is included in this fitting, and T₀ = 14 K and T_η = 18 K were obtained.

Fig. 3. (a) Lasing spectrum of a photonic crystal nanocavity at room temperature under 2.5 mW peak incident pump power. (b) The data points are output power versus incident pump power characteristic of a lasing mode at 1.33 μm in another photonic crystal nanocavity at varied substrate temperatures. The curves are fitting results with T₀ = 14 K and T_η = 18 K, the pump heating rate of 0.19 K / pJ included.

Pumping conditions for both (a) and (b) are 16 ns pulse widths and a 1% duty cycle.

The temperature dependences of both the microdisk lasers and the photonic crystal nanocavity lasers are much stronger than those reported for conventional InAs QD lasers. A T₀ value of 126 K was reported for Febry-Perot lasers under continuous wave (CW) operation which have similar InAs QDs as in our samples and which were grown by the same group [7

H. Chen, Z. Zou, O. B. Shchekin, and D. G. Deppe, “InAs quantum-dot lasers operating near 1.3 μm with high characteristic temperature for continuous-wave operation,” Electron. Lett. 36, 1703–1704 (2000). [CrossRef]

]. The strong temperature dependence is attributed to carrier recombination at threshold being dominated by surface recombination for these microcavity devices. Surface recombination has a much stronger temperature dependence than the carrier recombination inside the QDs. A detailed explanation and numerical modeling will be addressed in section 5.

4. Lasing threshold versus lasing wavelength

In this section, we report experimental results on the lasing threshold versus lasing wavelength behavior for the InAs QD microcavity lasers at a constant room temperature. Only photonic crystal nanocavities are studied due to their single mode property [4

]. Microdisks have multiple high Q modes.

Ninety photonic crystal nanocavities were fabricated in an array and characterized. The lattice constant, a, varied from 337 nm to 358 nm; the hole radii, r, had values 0.3 a, 0.31 a, and 0.32 a; and the shift distances of the two holes on the two ends of the cavity were 0.12 a and 0.15 a. Lasing threshold values were recorded under 8ns pulse width, 0.5% duty cycle pumping conditions in order to reduce the pump heating effects. Because of variations in cavity structure, sample growth, and fabrication, lasers with similar lasing wavelengths do not all have identical lasing thresholds. The threshold values that are the lowest among the devices with similar lasing wavelengths are plotted in Fig. 4. Also plotted in Fig. 4 is the photoluminescence (PL) spectrum from an unpatterned region on the same sample. This PL spectrum was taken with a high enough peak pump power but a small enough pump heating caused red-shift in order to approximately represent the QD density distribution versus wavelength. The PL spectra were quite uniform across the whole sample, with a 1-1.5 μm diameter pump spot.

As shown in Fig. 4, near the wavelength corresponding to the maximum QD density, the threshold pump power decreases with increasing wavelength. This occurs even when the QD density is decreasing. This indicates that the threshold gain required by the Q of these cavities is much smaller than the maximum gain available from the QDs. This will be further explained in section 5. The 0.2 mW threshold incident pump power around 1330 nm to 1340 nm corresponds to an estimated absorbed threshold pump power of 9 μW. This is the lowest threshold value for room temperature photonic crystal lasers reported to date.

Fig. 4. Data points: Experimental results of threshold incident pump power versus lasing wavelength for photonic crystal nanocavities. Dashed curves: Calculation results of threshold versus lasing wavelength for photonic crystal nanocavities. Solid curve: photoluminescence spectrum from an unpatterned area on the same sample.

As an aside, at the wavelength corresponding to the maximum QD density, approximately 24 QDs on average are estimated to contribute to the lasing. For the device with the longest lasing wavelength in Fig. 4, 4 to 5 QDs on average are estimated to contribute to the lasing. In this estimation, a 45 nm inhomogeneous broadening and a 5 nm homogeneous broadening of the InAs QD ensemble at room temperature are considered [8

Private communication with Hua Huang, a former student in Dennis Deppe’s group in University of Texas at Austin.

5. Modeling of temperature and wavelength dependence

To understand the mechanism behind the lasing performance reported in section 3 and section 4, we will describe a simple model in this section which gives qualitative predictions of the lasing behavior of the QD microcavity devices as a function of temperature and wavelength.

5.1 The model

Because of the high surface to volume ratios of these microcavity devices, and the large surface recombination velocities of GaAs and In_0.15Ga_0.85As near room temperature [9

E. Yablonovitch, R. Bhat, C. E. Zah, T. J. Gmitter, and M. A. Koza, “Nearly ideal InP/ln0.53Ga0.47As heterojunction regrowth on chemically prepared ln_0.53Ga_0.47As surfaces,” Appl. Phys. Lett. 60, 371–373 (1992). [CrossRef]

], carrier consumption at lasing threshold is dominated by surface recombination. This can be confirmed as follows: The spontaneous emission power from the ground states of the InAs QDs has an upper limit in which case all the QD ground states are excited. This upper limit is approximately 0.2 μW for 5 layers of QDs within a 1 μm diameter pump spot with a QD density per layer of 2 × 10¹⁰/cm², a luminescence wavelength of 1300 nm, and a spontaneous emission lifetime of 1 ns [8

Private communication with Hua Huang, a former student in Dennis Deppe’s group in University of Texas at Austin.

]. Therefore, at the absorbed threshold pump powers above 9 μW at 850 nm, spontaneous emission from the QDs only consume a tiny fraction of all the excited electron-hole pairs. Using a simple model for estimating the radiative and nonradiative recombination rates, as in [10

Han-Youl Ryu, Jeong-Ki Hwang, Dae-Sung Song, Il-Young Han, and Yong-Hee Lee, “Effect of nonradiative recombination on light emitting properties of two-dimensional photonic crystal slab structures,” Appl. Phys. Lett. 78, 1174–1176 (2001). [CrossRef]

], it can be concluded that at threshold most of the pumped carriers recombine via surface recombination.

In this model, we will just calculate the surface recombination rate at threshold and take it as the lasing threshold. To simplify the calculation three assumptions are made without losing the essence of the physical mechanisms.

Assumption 1: surface recombination rate ∝ N,

where N is the density of carriers outside the QDs in the optical mode volume.

The carrier capture time from the wetting layers of the InAs QDs has been reported to be on the order of 1 ps near room temperature [11

T. F. Boggessa, L. Zhang, D. G. Deppe, D. L. Huffaker, and C. Cao, “Spectral engineering of carrier dynamics in In(Ga)As self-assembled quantum dots,” Appl. Phys. Lett. 78, 276–278 (2001). [CrossRef]

]. Therefore the carrier distribution is at quasi-equilibrium at and below the lasing threshold, and the density of carriers outside the QDs is obtained by non-degenerate Fermi-Dirac distribution [12

Shun Lien Chuang, Physics of Optoelectronic Devices (John Wiley & Sons, 1995).

N_{bulk} = 2 {[\frac{m^{*} k_{B} T}{{2 π ħ}^{2}}]}^{\frac{3}{2}} e^{\frac{E_{F} - E_{0}}{k_{B} T}}, N_{QW} = \frac{m^{*} k_{B} T}{π ħ^{2}} e^{\frac{E_{F} - E_{0}}{k_{B} T}} / 180 nm \cdot

(1)

where N_bulk is the carrier density in bulk material, NQW is the 3-D carrier density in a confined QW state, m^* is the effective mass of carriers, k_B is the Boltzmann constant, T is the temperature, E_F is the quasi Fermi level, and E₀ is the band edge of the carrier energy bands. The 2-D carrier density in a QW state is divided by the thickness of the GaAs membrane, 180 nm, to be converted to an equivalent 3-D carrier density. The band diagram and the effective mass values that will be used in the model are shown in Fig. 5.

Fig. 5. The band diagram and the effective mass values used for the InAs QD material. E: energy level, m: effective mass, c: conduction band, v: valence band, e: electron, hh: heavy hole, lh: light hole, ρ: orthogonal to growth direction, z: along growth direction, m0: mass of electron. There are one electron state and two heavy hole states confined in the QW. [12-16]

Assumption 2: N = (N_e N_h)^1/2,

where N is the nominal carrier density outside of the QDs that we will use for surface recombination rate calculation. N_e and N_h are the electron density and the hole density outside the QDs respectively.

According to Fig. 5 and Eq. (1), we have:

{[N (k_{B} T, E_{Fe} - E_{Fh})]}^{2}

= (N_{e, bulk} + N_{e, QWc}) (N_{hh, bulk} + N_{lh, bulk} + N_{hh, QWv 1} + N_{hh, QWv 2})

= 2 {[\frac{m_{e} k_{B} T}{{2 π ħ}^{2}}]}^{\frac{3}{2}} 2 {[\frac{{(m_{hh}^{\frac{3}{2}} + m_{lh}^{\frac{3}{2}})}^{\frac{2}{3}} k_{B} T}{{2 π ħ}^{2}}]}^{\frac{3}{2}} e^{\frac{(E_{Fe} - E_{Fh}) - (E_{c, GaAs} - E_{v, GaAs})}{k_{B} T}}

+ 2 {[\frac{m_{e} k_{B} T}{{2 π ħ}^{2}}]}^{\frac{3}{2}} [\frac{m_{hhρ} k_{B} T}{{π ħ}^{2} \times 180 nm}] e^{\frac{(E_{Fe} - E_{Fh})}{k_{B} T}} (e^{\frac{E_{c, GaAs} - E_{QWv 1}}{k_{B} T}} + e^{\frac{E_{c, GaAs} - E_{QWv 2}}{k_{B} T}})

+ [\frac{m_{eρ} k_{B} T}{{π ħ}^{2} \times 180 nm}] 2 {[\frac{{(m_{hh}^{\frac{3}{2}} + m_{lh}^{\frac{3}{2}})}^{\frac{2}{3}} k_{B} T}{{2 π ħ}^{2}}]}^{\frac{3}{2}} e^{\frac{(E_{Fe} - E_{Fh}) - (E_{QWc} - E_{v, GaAs})}{k_{B} T}}

+ [\frac{m_{eρ} k_{B} T}{{π ħ}^{2} \times 180 nm}] [\frac{m_{hhρ} k_{B} T}{{π ħ}^{2} \times 180 nm}] e^{\frac{(E_{Fe} - E_{Fh})}{k_{B} T}} (e^{\frac{E_{QWc} - E_{QWv 1}}{k_{B} T}} + e^{\frac{E_{QWc} - E_{QWv 2}}{k_{B} T}})

(2)

We can see that now N is only a function of T and (E_Fe - E_Fh).

Assumption 3: Occupancies of a QD’s conduction band ground state and valence band ground state are equal.

This assumption is mathematically expressed as, according to Fermi-Dirac distribution:

\frac{1}{1 + e^{\frac{(E_{QDc} - E_{Fe})}{k_{B} T}}} = \frac{1}{1 + e^{\frac{(E_{Fh} - E_{QDv})}{k_{B} T}}}

(3)

At threshold, the population inversion of the electron and hole ground states of each QD participating in the lasing is proportional to the threshold gain divided by the number of QDs participating in the lasing. This can be mathematically expressed as:

ρ_{QD} (λ) [\frac{1}{1 + e^{\frac{(E_{QDc} - E_{Fe})}{k_{B} T}}} + \frac{1}{1 + e^{\frac{(E_{Fh} - E_{QDv})}{k_{B} T}}} - 1] = ρ_{QD} (λ_{0}) [G_{th} / G_{0}]

(4)

where ρ_QD is the QD density per unit wavelength, λ is the lasing wavelength, λ₀ is the wavelength that corresponds to the maximum QD density, G_th is the threshold gain which is determined by the cavity Q value and will be assumed as a constant from now on, and G₀ is the gain value at λ₀ when the all the QD ground states are inverted. Inside the square brackets on the left side of Eq. (4) is the population inversion of one pair of QD electron and hole ground states at the lasing wavelength λ. G_th/G₀ is the threshold population inversion of one such pair when the lasing wavelength is λ₀.

Substituting Eq. (3) into Eq. (4), and noticing that for the QDs participating in the lasing we have E_Qc - E_Qv = hc/λ, it is easy to obtain:

E_{Fe} - E_{Fh} = - {2 k}_{B} T \ln (\frac{2}{\frac{ρ_{QD} (λ_{0})}{ρ_{QD} (λ)} \cdot \frac{G_{th}}{G_{0}} + 1} - 1) + hc / λ

(5)

Substituting Eq. (5) into Eq. (2), we can see that N can be written as a function of T, λ, and ρ_QD, with one fitting parameter G_th/G₀. ρ_QD is obtained from the PL spectrum from an unpatterned area on the sample. Now we can qualitatively predict the lasing threshold’s dependence on temperature and wavelength.

5.2 Modeling results

Let’s look at the modeling results on temperature dependence first. This model predicts a T₀ = 36.0 K at T = 40 °C and a lasing wavelength of 1.30 μm, and a T₀ = 30.9 K at T = 20 °C and a lasing wavelength of 1.33 μm. The sample material’s energy band shift and the lasing wavelength shift under different temperatures and pump powers have been determined to be insignificant and ignored in the calculation. In section 2 we have reported for the microdisk laser T₀ = 31 K at T = 40 °C and a lasing wavelength of 1.30 μm; for the photonic crystal nanocavity laser T₀ = 14 K at T = 20 °C and a lasing wavelength of 1.33 μm. The calculation and experimental results for the microdisk are close. The experimental T₀ value of the photonic crystal nanocavity is quite smaller than that of the microdisk. The reason is not clear but it may be attributed to the different carrier diffusion behaviors, which are also temperature dependent. Carries in the microdisks are confined within the disk while there are no such confinement boundaries in photonic crystal.

The mechanism behind the large difference between the temperature dependence of the InAs QD microcavity lasers and that of the conventional InAs QD lasers can be seen by simply looking at the Fermi-Dirac occupancy of a carrier state:

\frac{1}{1 + e^{\frac{({E - E}_{F})}{k_{B} T}}}

(6)

For the conventional InAs QD lasers, E in Eq. (6) predominantly represents the energy levels of the carriers in the QDs. For the microcavity lasers, E predominantly represents the energy levels of the carriers in the bulk and the QWs which contribute to the surface recombination. Therefore (E-E_F)/k_BT is a much larger number for the microcavity lasers than for the conventional lasers. By simple mathematical derivation, it can be seen that the large difference in the values of (E-E_F)/k_BT leads to a large difference in the temperature dependence of the value of Eq. (6).

Assuming the QDs have a carrier capture time of 1ps [11

], we estimate that the carrier density outside the QDs is not clamped above threshold, and that surface recombination is still a large portion of the total recombination rate above threshold. This explains the rapid decrease of the slope efficiency with increasing temperature and the rollover of the output power versus pump power characteristic in Fig. 2(b) and Fig. 3(b). These phenomena are not observed with the Febry-Perot InAs QD laser [7

This study indicates that reduction of the surface recombination in such InAs QD microcavity lasers is important in order to obtain low threshold, high slope efficiency, high thermal stability, and CW operation. Surface passivation, p-type modulation doping [17

O. B. Shchekin and D. G. Deppe, “Low-Threshold High-T₀ 1.3-–m InAs Quantum-Dot Lasers Due to P-type Modulation Doping of the Active Region,” IEEE Photon. Technol. Lett. 14, 1231–1233 (2002). [CrossRef]

], and incorporating Al-bearing materials around the QDs are three possible routes.

Now let’s look at the modeling results on lasing wavelength dependence. To explain the data points in Fig. 4 which show that the lasing wavelength corresponding to the lowest threshold is not aligned with the wavelength corresponding to the maximum QD density, we define G(λ) = [ρ_QD(λ)/ρ_QD(λ₀)]G₀. G(λ) represents the maximum available gain for lasers at λ. When G_th ≪ G(λ), as λ increases the value of Eq. (5) will predominantly follow the change of the term hc/λ and decrease. Therefore, N and the surface recombination rate at threshold will decrease. Consequently, in Fig. 4, the threshold decreases with increasing λ up to around 1340 nm. After 1340 nm, G_th ≪ G(λ) is no longer true, and the decrease in the number of QDs participating in the lasing becomes important, which is represented by the first term on the right side of Eq. (5).

The dashed curves in Fig. 4 are the modeling results with one single fitting parameter G_th/G₀. Threshold values in this model are up to a constant multiplication factor. Again, the sample material’s energy band shift and the lasing wavelength shift under different pump powers have been determined to be insignificant and ignored in the calculation. Modeling results with G_th/G₀ = 1/7 agree well with the experimental results. Modeling results with G_th/G₀ = 1/100 shows how thresholds decrease with increasing lasing wavelength when G_th ≪ G(λ).

This study of lasing wavelength dependence indicates how to engineer the lasing threshold values. A constant threshold value in a broad lasing wavelength range is favorable for photonic integrated circuits.

6. Conclusion

We have reported InAs QD microdisk lasers, photonic crystal nanocavity lasers, and their lasing behaviors as a function of temperature and lasing wavelength. A simple model attributes the strong temperature dependence of these devices predominantly to surface recombination near room temperature. High Q values of the photonic crystal nanocavity lasers result in threshold decreases with increasing lasing wavelength. These studies are important for understanding, improving, and engineering the QD microcavity devices in order to be applied in high density photonic integrated circuits.

Acknowledgments

This study is based on research supported by the National Science Foundation (NSF) and the Defense Advanced Research Projects Agency (DARPA).

References and links

01.	M. Sugawara, “Self-assembled InGaAs/GaAs quantum dots,” in Semiconductors and Semimetals , vol. 60. (Academic, 1999).
02.	Y. Masumoto and T. Takagahara, Semiconductor quantum dots : physics, spectroscopy, and applications (Springer, 2002).
03.	Yoshihiro Akahane, Takashi Asano, Bong-Shik Song, and Susumu Noda, “High-Q photonic nanocavity in a two-dimensional photonic crystal,” Nature 425, 944–947 (2003). [CrossRef] [PubMed]
04.	Tian Yang, Samuel Lipson, J. D. O’Brien, and D.G. Deppe, “InAs Quantum Dot Photonic Crystal Lasers and Their Temperature Dependence,” IEEE Photon. Technol. Lett. 17, 2244–2246 (2005). [CrossRef]
05.	T. Yang, J. Cao, P. Lee, M. Shih, R. Shafiiha, S. Farrell, J. O’Brien, O. Shchekin, and D. Deppe, “Microdisks with quantum dot active regions lasing near 1300 nm at room temperature,” in Tech. Digest Conf. On Lasers and Electro-Optics , (Baltimore, MD, 2003), CWK3.
06.	R. E. Slusher, A. F. J. Levi, U. Mohideen, S. L. McCall, S. J. Pearton, and R. A. Logan, “Threshold characteristics of semiconductor microdisk lasers,” Appl. Phys. Lett. 63, 1310–1312 (1993). [CrossRef]
07.	H. Chen, Z. Zou, O. B. Shchekin, and D. G. Deppe, “InAs quantum-dot lasers operating near 1.3 μm with high characteristic temperature for continuous-wave operation,” Electron. Lett. 36, 1703–1704 (2000). [CrossRef]
08.	Private communication with Hua Huang, a former student in Dennis Deppe’s group in University of Texas at Austin.
09.	E. Yablonovitch, R. Bhat, C. E. Zah, T. J. Gmitter, and M. A. Koza, “Nearly ideal InP/ln0.53Ga0.47As heterojunction regrowth on chemically prepared ln_0.53Ga_0.47As surfaces,” Appl. Phys. Lett. 60, 371–373 (1992). [CrossRef]
10.	Han-Youl Ryu, Jeong-Ki Hwang, Dae-Sung Song, Il-Young Han, and Yong-Hee Lee, “Effect of nonradiative recombination on light emitting properties of two-dimensional photonic crystal slab structures,” Appl. Phys. Lett. 78, 1174–1176 (2001). [CrossRef]
11.	T. F. Boggessa, L. Zhang, D. G. Deppe, D. L. Huffaker, and C. Cao, “Spectral engineering of carrier dynamics in In(Ga)As self-assembled quantum dots,” Appl. Phys. Lett. 78, 276–278 (2001). [CrossRef]
12.	Shun Lien Chuang, Physics of Optoelectronic Devices (John Wiley & Sons, 1995).
13.	V. I. Zubkov, M. A. Melnik, A. V. Solomonov, and E. O. Tsvelev, “Determination of band offsets in strained InxGa1-xAs/GaAs quantum wells by capacitance-voltage profiling and Schrödinger-Poisson self-consistent simulation,” Phys. Rev. B 70, 075312 (2004). [CrossRef]
14.	J.-P. Reithmaier, R. Hoger, H. Riechert, A. Heberle, G. Abstreiter, and G. Weimann, “Band offset in elastically strained InGaAs/GaAs multiple quantum wells determined by optical absorption and electronic Raman scattering,” Appl. Phys. Lett. 56, 536–538 (1990). [CrossRef]
15.	Kyu-Seok Lee and El-Hang Lee, “Optical Determination of the Heavy-hole Effective Mass of (In, Ga)As/GaAs Quantum Wells,” ETRI Journal 17, 13–24 (1996). [CrossRef]
16.	m_hhz of In_0.15Ga_0.85As QWs has not been found in the literature and is obtained by fitting to the experimentally measured QW band gap of 1.297eV.
17.	O. B. Shchekin and D. G. Deppe, “Low-Threshold High-T₀ 1.3-–m InAs Quantum-Dot Lasers Due to P-type Modulation Doping of the Active Region,” IEEE Photon. Technol. Lett. 14, 1231–1233 (2002). [CrossRef]

OCIS Codes
(140.5960) Lasers and laser optics : Semiconductor lasers
(140.6810) Lasers and laser optics : Thermal effects
(160.6000) Materials : Semiconductor materials
(230.3990) Optical devices : Micro-optical devices

ToC Category:
Lasers and Laser Optics

History
Original Manuscript: February 1, 2007
Revised Manuscript: April 5, 2007
Manuscript Accepted: May 26, 2007
Published: May 30, 2007

Citation
Tian Yang, Adam Mock, John D. O'Brien, Samuel Lipson, and Dennis G. Deppe, "Lasing characteristics of InAs quantum dot microcavity lasers as a function of temperature and wavelength," Opt. Express 15, 7281-7289 (2007)
http://www.opticsinfobase.org/oe/abstract.cfm?URI=oe-15-12-7281

Sort: Author | Year | Journal | Reset

References

M. Sugawara, "Self-assembled InGaAs/GaAs quantum dots," in Semiconductors and Semimetals, vol. 60. (Academic, 1999).
Y. Masumoto, T. Takagahara, Semiconductor quantum dots : physics, spectroscopy, and applications (Springer, 2002).
Yoshihiro Akahane, Takashi Asano, Bong-Shik Song, and Susumu Noda, "High-Q photonic nanocavity in a two-dimensional photonic crystal," Nature 425, 944-947 (2003). [CrossRef] [PubMed]
Tian Yang, Samuel Lipson, J. D. O'Brien, and D.G. Deppe, "InAs Quantum Dot Photonic Crystal Lasers and Their Temperature Dependence," IEEE Photon. Technol. Lett. 17, 2244-2246 (2005). [CrossRef]
T. Yang, J. Cao, P. Lee, M. Shih, R. Shafiiha, S. Farrell, J. O'Brien, O. Shchekin, and D. Deppe, "Microdisks with quantum dot active regions lasing near 1300 nm at room temperature," in Tech. Digest Conf. On Lasers and Electro-Optics, (Baltimore, MD, 2003), CWK3.
R. E. Slusher, A. F. J. Levi, U. Mohideen, S. L. McCall, S. J. Pearton, and R. A. Logan, "Threshold characteristics of semiconductor microdisk lasers," Appl. Phys. Lett. 63, 1310-1312 (1993). [CrossRef]
H. Chen, Z. Zou, O. B. Shchekin, D. G. Deppe, "InAs quantum-dot lasers operating near 1.3 μm with high characteristic temperature for continuous-wave operation," Electron. Lett. 36, 1703-1704 (2000). [CrossRef]
Private communication with Hua Huang, a former student in Dennis Deppe’s group in University of Texas at Austin.
E. Yablonovitch, R. Bhat, C. E. Zah, T. J. Gmitter, and M. A. Koza, "Nearly ideal InP/ln0.53Ga0.47As heterojunction regrowth on chemically prepared ln0.53Ga0.47As surfaces," Appl. Phys. Lett. 60, 371-373 (1992). [CrossRef]
Han-Youl Ryu, Jeong-Ki Hwang, Dae-Sung Song, Il-Young Han, and Yong-Hee Lee, "Effect of nonradiative recombination on light emitting properties of two-dimensional photonic crystal slab structures," Appl. Phys. Lett. 78, 1174-1176 (2001). [CrossRef]
T. F. Boggessa, L. Zhang, D. G. Deppe, D. L. Huffaker, and C. Cao, "Spectral engineering of carrier dynamics in In(Ga)As self-assembled quantum dots," Appl. Phys. Lett. 78, 276-278 (2001). [CrossRef]
Shun Lien Chuang, Physics of Optoelectronic Devices (John Wiley & Sons, 1995).
V. I. Zubkov, M. A. Melnik, A. V. Solomonov, and E. O. Tsvelev, "Determination of band offsets in strained InxGa1−xAs/GaAs quantum wells by capacitance-voltage profiling and Schrödinger-Poisson self-consistent simulation," Phys. Rev. B 70, 075312 (2004). [CrossRef]
J.-P. Reithmaier, R. Hoger, H. Riechert, A. Heberle, G. Abstreiter, and G. Weimann, "Band offset in elastically strained InGaAs/GaAs multiple quantum wells determined by optical absorption and electronic Raman scattering," Appl. Phys. Lett. 56, 536-538 (1990). [CrossRef]
Kyu-Seok Lee, and El-Hang Lee, "Optical Determination of the Heavy-hole Effective Mass of (In, Ga)As/GaAs Quantum Wells," ETRI Journal 17, 13-24 (1996). [CrossRef]
mhhz of In0.15Ga0.85As QWs has not been found in the literature and is obtained by fitting to the experimentally measured QW band gap of 1.297eV.
O. B. Shchekin, and D. G. Deppe, "Low-Threshold High-T0 1.3-μm InAs Quantum-Dot Lasers Due to P-type Modulation Doping of the Active Region," IEEE Photon. Technol. Lett. 14, 1231-1233 (2002). [CrossRef]

Abstreiter, G.
Akahane, Yoshihiro
Bhat, R.
Boggessa, T. F.
Cao, C.
Chen, H.
Deppe, D. G.
Gmitter, T. J.
Heberle, A.
Hoger, R.
Huffaker, D. L.
Koza, M. A.
Lee, El-Hang
Lee, Kyu-Seok
Levi, A. F. J.
Logan, R. A.
McCall, S. L.
Melnik, M. A.
Mohideen, U.
Pearton, S. J.
Reithmaier, J.-P.
Riechert, H.
Shchekin, O. B.
Slusher, R. E.
Solomonov, A. V.
Tsvelev, E. O.
Weimann, G.
Yablonovitch, E.
Yang, Tian
Zah, C. E.
Zhang, L.
Zou, Z.
Zubkov, V. I.

Appl. Phys. Lett.

E. Yablonovitch, R. Bhat, C. E. Zah, T. J. Gmitter, and M. A. Koza, "Nearly ideal InP/ln0.53Ga0.47As heterojunction regrowth on chemically prepared ln0.53Ga0.47As surfaces," Appl. Phys. Lett. 60, 371-373 (1992). [CrossRef]
Han-Youl Ryu, Jeong-Ki Hwang, Dae-Sung Song, Il-Young Han, and Yong-Hee Lee, "Effect of nonradiative recombination on light emitting properties of two-dimensional photonic crystal slab structures," Appl. Phys. Lett. 78, 1174-1176 (2001). [CrossRef]
T. F. Boggessa, L. Zhang, D. G. Deppe, D. L. Huffaker, and C. Cao, "Spectral engineering of carrier dynamics in In(Ga)As self-assembled quantum dots," Appl. Phys. Lett. 78, 276-278 (2001). [CrossRef]
R. E. Slusher, A. F. J. Levi, U. Mohideen, S. L. McCall, S. J. Pearton, and R. A. Logan, "Threshold characteristics of semiconductor microdisk lasers," Appl. Phys. Lett. 63, 1310-1312 (1993). [CrossRef]
J.-P. Reithmaier, R. Hoger, H. Riechert, A. Heberle, G. Abstreiter, and G. Weimann, "Band offset in elastically strained InGaAs/GaAs multiple quantum wells determined by optical absorption and electronic Raman scattering," Appl. Phys. Lett. 56, 536-538 (1990). [CrossRef]

Electron. Lett.

H. Chen, Z. Zou, O. B. Shchekin, D. G. Deppe, "InAs quantum-dot lasers operating near 1.3 μm with high characteristic temperature for continuous-wave operation," Electron. Lett. 36, 1703-1704 (2000). [CrossRef]

ETRI Journal

Kyu-Seok Lee, and El-Hang Lee, "Optical Determination of the Heavy-hole Effective Mass of (In, Ga)As/GaAs Quantum Wells," ETRI Journal 17, 13-24 (1996). [CrossRef]

IEEE Photon. Technol. Lett.

O. B. Shchekin, and D. G. Deppe, "Low-Threshold High-T0 1.3-μm InAs Quantum-Dot Lasers Due to P-type Modulation Doping of the Active Region," IEEE Photon. Technol. Lett. 14, 1231-1233 (2002). [CrossRef]
Tian Yang, Samuel Lipson, J. D. O'Brien, and D.G. Deppe, "InAs Quantum Dot Photonic Crystal Lasers and Their Temperature Dependence," IEEE Photon. Technol. Lett. 17, 2244-2246 (2005). [CrossRef]

Nature

Yoshihiro Akahane, Takashi Asano, Bong-Shik Song, and Susumu Noda, "High-Q photonic nanocavity in a two-dimensional photonic crystal," Nature 425, 944-947 (2003). [CrossRef] [PubMed]

Phys. Rev. B

V. I. Zubkov, M. A. Melnik, A. V. Solomonov, and E. O. Tsvelev, "Determination of band offsets in strained InxGa1−xAs/GaAs quantum wells by capacitance-voltage profiling and Schrödinger-Poisson self-consistent simulation," Phys. Rev. B 70, 075312 (2004). [CrossRef]

Other

Private communication with Hua Huang, a former student in Dennis Deppe’s group in University of Texas at Austin.
mhhz of In0.15Ga0.85As QWs has not been found in the literature and is obtained by fitting to the experimentally measured QW band gap of 1.297eV.
T. Yang, J. Cao, P. Lee, M. Shih, R. Shafiiha, S. Farrell, J. O'Brien, O. Shchekin, and D. Deppe, "Microdisks with quantum dot active regions lasing near 1300 nm at room temperature," in Tech. Digest Conf. On Lasers and Electro-Optics, (Baltimore, MD, 2003), CWK3.
M. Sugawara, "Self-assembled InGaAs/GaAs quantum dots," in Semiconductors and Semimetals, vol. 60. (Academic, 1999).
Y. Masumoto, T. Takagahara, Semiconductor quantum dots : physics, spectroscopy, and applications (Springer, 2002).
Shun Lien Chuang, Physics of Optoelectronic Devices (John Wiley & Sons, 1995).

2005, Yang, IEEE Photon. Technol. Lett.
2004, Zubkov, Phys. Rev. B
2003, Akahane, Nature
2002, Shchekin, IEEE Photon. Technol. Lett.
2001, , Appl. Phys. Lett.
2001, Boggessa, Appl. Phys. Lett.
2000, Chen, Electron. Lett.
1996, Lee, ETRI Journal
1993, Slusher, Appl. Phys. Lett.
1992, Yablonovitch, Appl. Phys. Lett.
1990, Reithmaier, Appl. Phys. Lett.

Cited By

Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.

Click here to see a list of articles that cite this paper

Figures


Fig. 1.	Fig. 2.	Fig. 3.


Fig. 4.	Fig. 5.

« Previous Article | Next Article »

OSA is a member of CrossRef.

OpticsInfoBase

Optics Express

Lasing characteristics of InAs quantum dot microcavity lasers as a function of temperature and wavelength

Article Tools