Tunable multi-wavelength SOA fiber laser based on a Sagnac loop mirror using an elliptical core side-hole fiber

doi:10.1364/OE.15.008371

Optics Express

Editor: C. Martijn de Sterke
Vol. 15, Iss. 13 — Jun. 25, 2007
pp: 8371–8376

Tunable multi-wavelength SOA fiber laser based on a Sagnac loop mirror using an elliptical core side-hole fiber

Dae Seung Moon, Bok Hyeon Kim, Aoxiang Lin, Guoyong Sun, Won-Taek Han, Young-Geun Han, and Youngjoo Chung »View Author Affiliations

Optics Express, Vol. 15, Issue 13, pp. 8371-8376 (2007)
http://dx.doi.org/10.1364/OE.15.008371

View Full Text Article

Acrobat PDF (357 KB)

Journal Search
Article Lookup

Article Tools

Share

Citations

Alert me when this article is cited
Export Citation/Save

Article Navigation

▸ Article Outline
– Abstract
1. Introduction
2. Experiments and results
3. Conclusion
– References and links

Article Tools
Full Text
Article Info
References
Cited By
Figures
Metrics
Download PDF

Viewing Equations in the
HTML Article

Optimal Viewing Recommendations

Full Text
Article Info
References (18)
Cited By
Figures (7)
Metrics

Abstract

We propose and experimentally demonstrate a tunable multi-wavelength SOA fiber laser based on a Sagnac loop mirror using elliptical core side-hole fiber. We fabricated different types of elliptical core side-hole fiber with elliptical or circular cladding shape. The measured modal birefringence of the fabricated fiber was 1.7×10^-4 (elliptical shape) and 1.16×10^-4 (circular shape), respectively. By carefully adjusting the polarization controller inside the cavity, we could obtain 18 discrete channels with SNR over 30 dB and channel spacing of 0.8 nm and 10 discrete channels with SNR over 30 dB and channel spacing of ∼1.4 nm. The proposed fiber laser was rather stable and the temporal power fluctuation was less than 0.8 dB. In addition, by thermally heating the elliptical core side-hole fiber in the Sagnac loop, we could obtain a tunable multi-wavelength fiber laser.

1. Introduction

Multi-wavelength fiber lasers have attracted great interest because of their potential application in optical fiber sensing, optical communications, instrument testing and so on thanks to their various advantages, such as multi-wavelength operation, low cost and low insertion loss. Semiconductor optical amplifier (SOA)-based multi-wavelength fiber lasers exhibit stable operation because the SOA has the property of primarily inhomogeneous broadening and thus can support simultaneous oscillation of many lasing wavelengths [1–4

H. Chen, “Multiwavelength fiber ring lasing by use of a semiconductor optical amplifier,” Opt. Lett. 30, 619–621 (2005). [CrossRef] [PubMed]

].

Several techniques have been proposed to achieve multi-wavelength fiber lasers [5–11

N. Park and P. F. Wysocki, “24-Line multiwavelength operation of erbium-doped fiber ring laser,” IEEE Photon. Technol. Lett. 8, 1459–1461 (1996) [CrossRef]

]. Among them, the use of a fiber Fabry-Perot filter increases the insertion loss of the cavity, and a Mach-Zehnder filter is sensitive to environmental changes due to the difference in the optical path lengths of the two arms. The Sagnac loop filter incorporating high birefringence fiber has the advantages of simple configuration and better stability compared with the filters based on Fabry-Perot and Mach-Zehnder interferometers.

In this paper, we propose and experimentally demonstrate a multi-wavelength fiber laser based on a Sagnac loop mirror using elliptical core side-hole fiber with elliptical or circular shape cladding. In addition, we demonstrate a tunable multi-wavelength fiber laser by thermally heating the elliptical core side-hole fiber in the Sagnac loop.

2. Experiments and results

To fabricate the elliptical core side-hole fiber, we used the MCVD process. Figure 1 shows the cross section of the fabricated side-hole fiber with an elliptical core. To fabricate the elliptical-shape fiber with elliptical core [Fig. 1(a)], it was fabricated by over-jacketing (19 X 25 tube) and collapsing after cutting both sides of preform [12

D. S. Moon, U. C. Paek, and Y. Chung, “Polarization controlled multi-wavelength Er-doped fiber laser using fiber Bragg grating written in few-mode side-hole fiber with an elliptical core,” Opt. Express 13, 5574–5579 (2005). [CrossRef] [PubMed]

]. The fiber was drawn at the temperature of 1930 °C. The relative index difference Δn (peak) was 0.02. The major/minor axes of the core and the side-hole diameter were 12 μm/6.6 μm and 20 ∼ 25 μm, respectively. To fabricate the circular-shape fiber with elliptical core [Fig. 1(b)], two holes of 5-mm diameter were drilled on both sides of the core in the preform [13

B. H. Kim, S. Moon, U. C. Paek, and W. T. Han, “All fiber polarimetric modulation using an electro-optic fiber with internal Pb-Sn electrodes,” Opt. Express 14, 11234–11241 (2006). [CrossRef] [PubMed]

]. The core with elliptical shape was made by partially collapsing the holes during fiber drawing at 2000 °C. The major/minor axes of the core and the side-hole diameter were 6.25 μm/3.8 μm and 18 μm, respectively. The relative index difference Δn (peak) was 0.018.

Fig. 1. The cross-section of fabricated elliptical core side-hole fiber with (a) an elliptical shape, (b) a circular shape.

Generally, the wavelength separation between two transmission peaks of the Sagnac loop mirror’s output is given by Δλ=λ ²/BL (where B is the modal birefringence, L is the length of the elliptical core side-hole fiber, and λ is the operation wavelength) [14

C. S. Kim, Y. G. Han, R. M. Sova, U. C. Paek, Y. Chung, and J. U. Kang, “Optical fiber modal birefringence measurement based on Lyot-Sagnac interferometer,” IEEE Photon. Technol. Lett. 15, 269–271 (2003). [CrossRef]

]. From the transmission spectrum of a Sagnac loop mirror as shown in Fig. 2, the modal birefringence (B) of the fabricated elliptical core side-hole fiber was 1.7×10^-4 (elliptical shape, Δn=0.02) and 1.16×10^-4 (circular shape, Δn=0.018), respectively.

Fig. 2. (a). The configuration of a Sagnac loop mirror, (b) the transmission spectra of elliptical core side-hole fiber with an elliptical shape (L=10 m, Δλ=1.4 nm), and a circular shape (L=26 m, Δλ=0.8 nm), respectively.

Figure 3 shows the experimental setup of the proposed fiber laser. The input beam from two SOAs (or one SOA) is split into two counter-propagating beams by the 3 dB coupler, which recombine at the coupler after travelling through the fiber loop. Due to the large birefringence of the elliptical core side-hole fiber, the beams polarized along the fast axis and slow axis experience different optical path lengths. The channel spacing of the fiber laser is determined by the birefringent component only, which is the elliptical core side-hole fiber within the Sagnac loop mirror. The SOA1 and SOA2 (Alcatel, part no. 3CN00199CE) provided the peak small signal gain of 28.7 dB at 1550 nm with 0.5 dB polarization dependence when driven with 200 mA dc current. The laser output was taken from a 95:5 coupler, which provides 5 % for the output and 95 % for feedback to the cavity.

Fig. 3. The experimental setup for the multi-wavelength fiber laser.

Fig. 4. The gain spectra of one SOA and two SOAs when injection current of SOA was 200 mA.

To obtain the gain spectra, we used a broadband source, which had about -27 dBm output power at 1550 nm. As the injection current of SOA increased, the gain also increased. Figure 4 shows the gain spectra of one SOA and two SOAs, when injection current of SOA was 200 mA. The maximum gain was ∼23 dB (one SOA) and ∼35 dB (two SOAs), respectively. In case of two SOAs, the gain was higher than that of one SOA.

Due to the large birefringence of the fiber, the number of lasing wavelengths and the channel wavelengths were sensitive to the polarization controller setting. By carefully adjusting the polarization inside the cavity, we could obtain the maximum number of lasing wavelengths with one SOA or two SOAs driven with the injection current of 200 mA. In case of one SOA as shown in Figs. 5(a) and 5(c), the number of lasing wavelengths with less than 3 dB power variation among them was 8 for the elliptical shape and 12 for the circular shape, respectively. In case of two SOAs, which increased the number of lasing wavelengths and produced uniform and broad output power spectrum [15

N. Pleros, T. Houbavlis, G. Theophilopoulos, K. Vlachos, C. Bintjas, and H. Avramopoulos, “SOA-based multi-wavelength laser sources,” Fiber Integr. Opt. 23, 263–274 (2004). [CrossRef]

], the number of lasing wavelengths was 10 for the elliptical shape and 18 for the circular shape as shown in Figs. 5(b) and 5(d), respectively. The channel spacing was ∼1.4 nm and ∼0.8 nm (100 GHz at 1550 nm, i.e. WDM ITU-grid spacing) with SNR > 30 dB, respectively.

Fig. 5. The output spectra of the fiber laser. (i) elliptical shape (L=10 m, Δλ=1.4 nm): (a) one SOA, (b) two SOAs, (ii) circular shape (L=26 m, Δλ=0.8 nm): (c) one SOA, (d) two SOAs

Fig. 6. Repeatedly scanned output spectra of the multi-wavelength fiber laser. (a) elliptical core side-hole fiber with an elliptical shape (L=10 m, Δλ=1.4 nm), and (b) a circular shape (L=26 m, Δλ=0.8 nm).

Figure 6 shows the repeatedly scanned spectra of the multi-wavelength fiber laser output. A total of eight measurements were made at two minutes’ interval. The output power was rather stable and the temporal power fluctuation was less than 0.8 dB.

In the Sagnac loop mirror, the phase-shift sensitivity is given by the simple formula [16

E. De la Rosa, L. A. Zenteno, A. N. Starodumov, and D. Monzon, “All-fiber absolute temperature sensor using an unbalanced high-birefringence Sagnac loop,” Opt. Lett. 22, 481–483 (1997). [CrossRef] [PubMed]

]:

\frac{1}{L} \frac{dϕ}{dT} = \frac{2 π}{λ} B (\frac{1}{B} \frac{dB}{dT} + \frac{1}{L} \frac{dL}{dT}),

(1)

where

ϕ = \frac{2 π}{λ} BL

is the phase difference, B is birefringence, T is temperature, λ is the X wavelength, and L is the length of PM side-hole fiber. In general, when the temperature is increased in the PM fiber region of the Sagnac loop, the resonance wavelengths of the Sagnac loop, which determine the resonance wavelength of multi-wavelength fiber laser, are shifted toward the shorter wavelength due to the decrease of birefringence of PM fiber [17

E. De L. Rosa-Cruz, F. Mendoza-Santoyo, A. N. Starodumov, and M. Pacheco, “Temperature-induced changes of sensitivity in the unbalanced Hi-Bi fiber Sagnac interferometer,” Fiber Integr. Opt. 18, 41–48 (1999). [CrossRef]

]. In the Sagnac loop mirror, the temperature dependence of the resonance wavelengths is mainly determined by the characteristics and length of the PM fiber [18

D. H. Kim and J. U. Kang, “Sagnac loop interferometer based on polarization maintaining photonic crystal fiber with reduced temperature sensitivity,” Opt. Express 12, 4490–4495 (2004). [CrossRef] [PubMed]

]. Figure 7 shows output spectra of the tunable multi-wavelength fiber. We could control almost up to π-phase wavelength shift at ΔT=5°C (elliptical shape, L=10 m, Δλ=1.4 nm) and ΔT=2°C (circular shape, L=26 m, Δλ=0.8 nm), respectively.

Fig. 7. Output spectra of the tunable multi-wavelength fiber laser: (a) an elliptical shape (L=10 m, Δλ=1.4 nm), and (b) a circular shape (L=26 m, Δλ=0.8 nm).

3. Conclusion

In this work, we proposed and experimentally demonstrated a tunable multi-wavelength fiber laser based on a Sagnac loop mirror using elliptical core side-hole fiber. For experimental measurements, we fabricated different types of elliptical core side-hole fiber with elliptical or circular cladding shape. The modal birefringence (B) of the fabricated elliptical core side-hole fiber was 1.7×10^-4 (elliptical shape, Δn=0.02) and 1.16×10^-4 (circular shape, Δn=0.018), respectively. By carefully adjusting the polarization controller inside the cavity, we could obtain 18 discrete channels with SNR over 30 dB and channel spacing of 0.8 nm and 10 discrete channels with SNR over 30 dB and channel spacing of ∼1.4 nm, respectively. The proposed fiber laser was rather stable and the temporal power fluctuation was less than 0.8 dB. Moreover, by thermally heating the fiber in the Sagnac loop, we could tune the resonance wavelengths up to ∼π phase. The fiber laser proposed in this work will be very useful for applications in WDM systems, sensing, and instrument testing.

Acknowledgments

This work was performed under the partial support from the Second-Phase of the Brain Korea-21 Project, the Basic Program Project of KOSEF (Grant No. R01-2006-000-11088-0), and the Next-Generation Growth Engine Project of MOCIE.

References and links

1.	H. Chen, “Multiwavelength fiber ring lasing by use of a semiconductor optical amplifier,” Opt. Lett. 30, 619–621 (2005). [CrossRef] [PubMed]
2.	S. Roh, S. Chung, Y. W. Lee, I. Yoon, and B. Lee, “Channel-spacing- and wavelength-tunable multiwavelength fiber ring laser using semiconductor optical amplifier,” IEEE Photon. Technol. Lett. 18, 2302–2304 (2006). [CrossRef]
3.	D. S. Moon, Y. Chung, and Y. G. Han, “Multiwavelength fiber laser based on semiconductor optical amplifier and few-mode fiber gratings,” Opt. Eng. 46, 014202 (2007). [CrossRef]
4.	Y. G. Han, X. Dong, C. S. Kim, M. Y. Jeong, and J. H. Lee, “Flexible all fiber Fabry-Perot filters based on superimposed chirped fiber Bragg gratings with continuous FSR tunability and its application to a multiwavelength fiber laser,” Opt. Express 15, 2921–2926 (2007). [CrossRef] [PubMed]
5.	N. Park and P. F. Wysocki, “24-Line multiwavelength operation of erbium-doped fiber ring laser,” IEEE Photon. Technol. Lett. 8, 1459–1461 (1996) [CrossRef]
6.	J. Chow, G. Town, B. Eggleton, M. Ibsen, K. Sugden, and I. Bennion, “Multiwavelength generation in an erbium-doped fiber laser using in-fiber comb filters,” IEEE Photon. Technol. Lett. 8, 60–62 (1996). [CrossRef]
7.	D. S. Moon, U. C. Paek, and Y. Chung, “Multi-wavelength lasing oscillations in an erbium-doped fiber laser using few-mode fiber Bragg grating,” Opt. Express 12, 6147–6152 (2004). [CrossRef] [PubMed]
8.	X. Dong, P. Shum, N. Q. Ngo, and C. C. Chan, “Multiwavelength Raman fiber laser with a continuously-tunable spacing,” Opt. Express 14, 3288–3293 (2006). [CrossRef] [PubMed]
9.	X. Shu, S. Jiang, and D. Huang, “Fiber grating Sagnac loop and its multiwavelength laser application,” IEEE Photon. Technol. Lett. 12, 980–982 (2000). [CrossRef]
10.	H. L. An, X. Z. Lin, E. Y. B. Pun, and H. D. Liu, “Multi-wavelength operation of an erbium-doped fiber ring laser using a dual-pass Mach-Zehnder comb filter,” Opt. Commun. 169, 159–165 (1999). [CrossRef]
11.	S. Yamashita and K. Hotate, “Multiwavelength erbium-doped fibre laser using intracavity etalon and cooled by liquid nitrogen,” Electron. Lett. 32, 1298–1299 (1996). [CrossRef]
12.	D. S. Moon, U. C. Paek, and Y. Chung, “Polarization controlled multi-wavelength Er-doped fiber laser using fiber Bragg grating written in few-mode side-hole fiber with an elliptical core,” Opt. Express 13, 5574–5579 (2005). [CrossRef] [PubMed]
13.	B. H. Kim, S. Moon, U. C. Paek, and W. T. Han, “All fiber polarimetric modulation using an electro-optic fiber with internal Pb-Sn electrodes,” Opt. Express 14, 11234–11241 (2006). [CrossRef] [PubMed]
14.	C. S. Kim, Y. G. Han, R. M. Sova, U. C. Paek, Y. Chung, and J. U. Kang, “Optical fiber modal birefringence measurement based on Lyot-Sagnac interferometer,” IEEE Photon. Technol. Lett. 15, 269–271 (2003). [CrossRef]
15.	N. Pleros, T. Houbavlis, G. Theophilopoulos, K. Vlachos, C. Bintjas, and H. Avramopoulos, “SOA-based multi-wavelength laser sources,” Fiber Integr. Opt. 23, 263–274 (2004). [CrossRef]
16.	E. De la Rosa, L. A. Zenteno, A. N. Starodumov, and D. Monzon, “All-fiber absolute temperature sensor using an unbalanced high-birefringence Sagnac loop,” Opt. Lett. 22, 481–483 (1997). [CrossRef] [PubMed]
17.	E. De L. Rosa-Cruz, F. Mendoza-Santoyo, A. N. Starodumov, and M. Pacheco, “Temperature-induced changes of sensitivity in the unbalanced Hi-Bi fiber Sagnac interferometer,” Fiber Integr. Opt. 18, 41–48 (1999). [CrossRef]
18.	D. H. Kim and J. U. Kang, “Sagnac loop interferometer based on polarization maintaining photonic crystal fiber with reduced temperature sensitivity,” Opt. Express 12, 4490–4495 (2004). [CrossRef] [PubMed]

OCIS Codes
(060.2320) Fiber optics and optical communications : Fiber optics amplifiers and oscillators
(060.2420) Fiber optics and optical communications : Fibers, polarization-maintaining
(120.5790) Instrumentation, measurement, and metrology : Sagnac effect
(140.3510) Lasers and laser optics : Lasers, fiber

ToC Category:
Fiber Optics and Optical Communications

History
Original Manuscript: May 2, 2007
Revised Manuscript: June 14, 2007
Manuscript Accepted: June 14, 2007
Published: June 19, 2007

Citation
Dae Seung Moon, Bok Hyeon Kim, Aoxiang Lin, Guoyong Sun, Won-Taek Han, Young-Geun Han, and Youngjoo Chung, "Tunable multi-wavelength SOA fiber laser based on a Sagnac loop mirror using an elliptical core side-hole fiber," Opt. Express 15, 8371-8376 (2007)
http://www.opticsinfobase.org/oe/abstract.cfm?URI=oe-15-13-8371

Sort: Year | Journal | Reset

References

H. Chen, "Multiwavelength fiber ring lasing by use of a semiconductor optical amplifier," Opt. Lett. 30, 619-621 (2005). [CrossRef] [PubMed]
S. Roh, S. Chung, Y. W. Lee, I. Yoon, and B. Lee, "Channel-spacing- and wavelength-tunable multiwavelength fiber ring laser using semiconductor optical amplifier," IEEE Photon. Technol. Lett. 18, 2302-2304 (2006). [CrossRef]
D. S. Moon, Y. Chung, and Y. G. Han, "Multiwavelength fiber laser based on semiconductor optical amplifier and few-mode fiber gratings," Opt. Eng. 46, 014202 (2007). [CrossRef]
Y. G. Han, X. Dong, C. S. Kim, M. Y. Jeong, and J. H. Lee, "Flexible all fiber Fabry-Perot filters based on superimposed chirped fiber Bragg gratings with continuous FSR tunability and its application to a multiwavelength fiber laser," Opt. Express 15, 2921-2926 (2007). [CrossRef] [PubMed]
N. Park and P. F. Wysocki, "24-Line multiwavelength operation of erbium-doped fiber ring laser," IEEE Photon. Technol. Lett. 8, 1459-1461 (1996) [CrossRef]
J. Chow, G. Town, B. Eggleton, M. Ibsen, K. Sugden, and I. Bennion, "Multiwavelength generation in an erbium-doped fiber laser using in-fiber comb filters," IEEE Photon. Technol. Lett. 8, 60-62 (1996). [CrossRef]
D. S. Moon, U. C. Paek, and Y. Chung, "Multi-wavelength lasing oscillations in an erbium-doped fiber laser using few-mode fiber Bragg grating," Opt. Express 12, 6147-6152 (2004). [CrossRef] [PubMed]
X. Dong, P. Shum, N. Q. Ngo, and C. C. Chan, "Multiwavelength Raman fiber laser with a continuously-tunable spacing," Opt. Express 14, 3288-3293 (2006). [CrossRef] [PubMed]
X. Shu, S. Jiang, and D. Huang, "Fiber grating Sagnac loop and its multiwavelength laser application," IEEE Photon. Technol. Lett. 12, 980-982 (2000). [CrossRef]
H. L. An, X. Z. Lin, E. Y. B. Pun, and H. D. Liu, "Multi-wavelength operation of an erbium-doped fiber ring laser using a dual-pass Mach-Zehnder comb filter," Opt. Commun. 169, 159-165 (1999). [CrossRef]
S. Yamashita and K. Hotate, "Multiwavelength erbium-doped fibre laser using intracavity etalon and cooled by liquid nitrogen," Electron. Lett. 32, 1298-1299 (1996). [CrossRef]
D. S. Moon, U. C. Paek, and Y. Chung, "Polarization controlled multi-wavelength Er-doped fiber laser using fiber Bragg grating written in few-mode side-hole fiber with an elliptical core," Opt. Express 13, 5574-5579 (2005). [CrossRef] [PubMed]
B. H. Kim, S. Moon, U. C. Paek, and W. T. Han, "All fiber polarimetric modulation using an electro-optic fiber with internal Pb-Sn electrodes," Opt. Express 14, 11234-11241 (2006). [CrossRef] [PubMed]
C. S. Kim, Y. G. Han, R. M. Sova, U. C. Paek, Y. Chung, and J. U. Kang, "Optical fiber modal birefringence measurement based on Lyot-Sagnac interferometer," IEEE Photon. Technol. Lett. 15, 269-271 (2003). [CrossRef]
N. Pleros, T. Houbavlis, G. Theophilopoulos, K. Vlachos, C. Bintjas, and H. Avramopoulos, "SOA-based multi-wavelength laser sources," Fiber Integr. Opt. 23, 263-274 (2004). [CrossRef]
E. De la Rosa, L. A. Zenteno, A. N. Starodumov, and D. Monzon, "All-fiber absolute temperature sensor using an unbalanced high-birefringence Sagnac loop," Opt. Lett. 22, 481-483 (1997). [CrossRef] [PubMed]
E. De L. Rosa-Cruz, F. Mendoza-Santoyo, A. N. Starodumov, and M. Pacheco, "Temperature-induced changes of sensitivity in the unbalanced Hi-Bi fiber Sagnac interferometer," Fiber Integr. Opt. 18, 41-48 (1999). [CrossRef]
D. H. Kim and J. U. Kang, "Sagnac loop interferometer based on polarization maintaining photonic crystal fiber with reduced temperature sensitivity," Opt. Express 12, 4490-4495 (2004). [CrossRef] [PubMed]

Cited By

Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.

Click here to see a list of articles that cite this paper