Details of electro-optic terahertz detection with a chirped probe pulse

doi:10.1364/OE.15.001376

« Show journal navigation

Details of electro-optic terahertz detection with a chirped probe pulse

B. Yellampalle, K. Y. Kim, G. Rodriguez, J. H. Glownia, and A. J. Taylor »View Author Affiliations

Optics Express, Vol. 15, Issue 3, pp. 1376-1383 (2007)
http://dx.doi.org/10.1364/OE.15.001376

View Full Text Article

Acrobat PDF (137 KB)

Journal Search
Article Lookup

Article Tools

Citations

Alert me when this article is cited
Export Citation/Save

Article Navigation

▸ Article Outline
– Abstract
1. Introduction
2. Equations governing EO effect with a chirped pulse
3. Experimental verification
4. THz retrieval with the new equation
5. Conclusions
– References and links

Article Tools
Full Text
Article Info
References
Cited By
Figures
Metrics
Download PDF

Viewing Equations in the
HTML Article

Optimal Viewing Recommendations

Full Text
Article Info
References (17)
Cited By
Figures (4)
Metrics

Abstract

By revisiting the theory of terahertz pulse detection schemes employing a chirped optical probe pulse, we address and resolve a conflict that exists in literature. In this report, we show that the equation governing the detected field depends upon the experimental scheme, and in the limit of small bandwidth, that this expression differs from the conventionally used equation through a phase factor. We experimentally verify this equation using a spectral in-line interferometry approach. We also briefly discuss the implications of our new equations for single-shot terahertz retrieval schemes.

1. Introduction

Electro-optic (EO) mixing [1

Q. Wu and X.-C. Zhang, “Free-space electro-optic sampling of terahertz beams,” Appl. Phys. Lett. 67,3523–3525 (1995). [CrossRef]

] of an optical probe pulse and a terahertz (THz) pulse is the favored method for detection of THz fields in single-shot experiments. Single-shot THz detection is becoming increasingly important in a number of applications including ultrafast relativistic electron beam diagnostics [2

I. Wilke, A. M. MacLeod, W. A. Gillespie, G. Berden, G. M. H. Knippels, and A. F. G. van der Meer, “Single-shot electron-beam bunch length measurements.” Phys. Rev. Lett. 88,124801–4 (2002). [CrossRef] [PubMed]

, 3

G. Berden, S. P. Jamison, A. M. MacLeod, W. A. Gillespie, B. Redlich, and A. F. G. van der Meer, “Electro-optic technique with improved time resolution for real-time, nondestructive, single-shot measurements of femtosecond electron bunch profiles.” Phys. Rev. Lett. 93,114802–4 (2004). [CrossRef] [PubMed]

, 4

J. van Tilborg, C. B. Schroeder, C. V. Filip, C. Toth, C. G. R. Geddes, G. Fubiani, R. Huber, R. A. Kaindl, E. Esarey, and W. P. Leemans, “Temporal characterization of femtosecond laser-plasma-accelerated electron bunches using terahertz radiation.” Phys. Rev. Lett. 96,014801–4 (2006). [CrossRef] [PubMed]

], shock induced phase transformations and laser driven melting [5

K. Y. Kim, B. Yellampelle, J. H. Glownia, A. J. Taylor, and G. Rodriguez, “Terahertz-frequency electrical conductivity measurements of ultrashort laser-ablated plasmas,” Proceedings of SPIE - The International Society for Optical Engineering6261 II (2006).

]. Additionally, the characterization of ultrashort electron bunches are of growing interest at large facilities, such as the Stanford Linear Accelerator Center [6

L. Bentson, P. Bolton, E. Bong, P. Emma, J. Galayda, J. Hastings, P. Krejcik, C. Rago, J. Rifkin, and C. M. Spencer, “FEL research and development at the SLAC sub-picosecond photon source, SPPS,” Nucl. Instrum. Methods Phys. Res. ,507,205–209 (2003). [CrossRef]

], Brookhaven National Laboratory [7

T. Srinivasan-Rao, M. Amin, V. Castillo, D. M. Lazarus, D. Nikas, C. Ozben, Y. K. Semertzidis, A. Stillman, T. Tsang, and L. Kowalski, “Novel single shot scheme to measure submillimeter electron bunch lengths using electro-optic technique - art. no. 042801,” Phys. Rev. Spec. Top. -Accelerators and Beams 504,2801–2801 (2002).

], and FELIX [2

], as well as at laser based accelerators - for example, experiments at the Lawrence Berkeley National Laboratory [4

]. In many of these experiments, the sources have either low repetition rates or they have inherent shot-to-shot fluctuations, making single-shot schemes necessary. Several schemes exist for single-shot detection of THz fields and, as stated above, most of these exploit the EO effect with a chirped probe pulse [8

Z. P. Jiang and X. C. Zhang, “Electro-optic measurement of THz field pulses with a chirped optical beam,” Appl. Phys. Lett. 72,1945–1947 (1998). [CrossRef]

, 9

S. P. Jamison, J. L. Shen, A. M. MacLeod, W. A. Gillespie, and D. A. Jaroszynski, “High-temporal-resolution, single-shot characterization of terahertz pulses.” Opt. Lett. 28,1710–12 (2003). [CrossRef] [PubMed]

, 10

K. Y. Kim, B. Yellampalle, G. Rodriguez, R. D. Averitt, A. J. Taylor, and J. H. Glownia, “Single-shot, interferometric, high-resolution, terahertz field diagnostic,” Appl. Phys. Lett. 88,1–3 (2006).

The EO effect with a chirped probe, E _opt(t), is conventionally described as the product of the THz field, E _THz(t), and the probe beam as [8

Z. P. Jiang and X. C. Zhang, “Electro-optic measurement of THz field pulses with a chirped optical beam,” Appl. Phys. Lett. 72,1945–1947 (1998). [CrossRef]

, 9

, 11

B. Yellampalle, K. Y. Kim, G. Rodriguez, J. H. Glownia, and A. J. Taylor, “Algorithm for high-resolution single-shot THz measurement using in-line spectral interferometry with chirped pulses.” Appl. Phys. Lett. 87,211109–1 (2005). [CrossRef]

], E _out(t)=E _opt(t)[1+aE _THz(t)], where a is a constant. This conventional equation has been experimentally verified [8

Z. P. Jiang and X. C. Zhang, “Electro-optic measurement of THz field pulses with a chirped optical beam,” Appl. Phys. Lett. 72,1945–1947 (1998). [CrossRef]

, 10

] using the data from a multi-shot scan. However, in a recent Letter [12

S. P. Jamison, A. M. MacLeod, G. Berden, D. A. Jaroszynski, and W. A. Gillespie, “Temporally resolved electro-optic effect.” Opt. Lett. 31,1753–5 (2006). [CrossRef] [PubMed]

], the equation describing the electric field of a chirped optical probe pulse was reported to be,

E_{out} (t) = E_{opt} (t) + a \frac{d}{dt} [E_{opt} (t) E_{THz} (t)]

, which is in contradiction with the conventionally used equation. Furthermore, these authors also reported agreement with experiment [12

S. P. Jamison, A. M. MacLeod, G. Berden, D. A. Jaroszynski, and W. A. Gillespie, “Temporally resolved electro-optic effect.” Opt. Lett. 31,1753–5 (2006). [CrossRef] [PubMed]

]. In this letter, we resolve this conflict and show that the correct equation depends on various factors such as the residual birefringence of the EO crystal, the analyzer detuning, and the phase retardation from waveplates. In the small bandwidth limit, the correct equation is E _out(t)=E _opt(t)[1+aexp(iθ)E _THz(t)], in agreement with both the conventional equation and the recently reported result [12

S. P. Jamison, A. M. MacLeod, G. Berden, D. A. Jaroszynski, and W. A. Gillespie, “Temporally resolved electro-optic effect.” Opt. Lett. 31,1753–5 (2006). [CrossRef] [PubMed]

]. We also experimentally verify our result.

2. Equations governing EO effect with a chirped pulse

A typical single-shot EO detection set-up consists of an EO crystal placed between crossed polarizers. The THz induced leakage of the probe is either detected in a spectrometer [8

Z. P. Jiang and X. C. Zhang, “Electro-optic measurement of THz field pulses with a chirped optical beam,” Appl. Phys. Lett. 72,1945–1947 (1998). [CrossRef]

, 10

] or by performing a cross-correlation [9

]. Our goal is to derive the equation for the optical probe exiting the analyzer. For coherent detection, some background probe light is necessary which is obtained by the inherent residual birefringence of the EO crystal or analyzer detuning, or through an additional waveplate after the EO crystal (see Fig. 1(a).). For definiteness, we assume that the optical probe is y-polarized as it enters the crystal, and interacts with a co-polarized THz field. The electric field at the output of the crystal is described by equations similar to Eq. (6) of Ref. [12

S. P. Jamison, A. M. MacLeod, G. Berden, D. A. Jaroszynski, and W. A. Gillespie, “Temporally resolved electro-optic effect.” Opt. Lett. 31,1753–5 (2006). [CrossRef] [PubMed]

]. The EO crystal generates both the x and y -polarized optical fields due to the effective second order crystal susceptibility coefficients χ^x _eff and χ^y _eff along x and y directions [13

G. Gallot and D. Grischkowsky, “Electro-optic detection of terahertz radiation.” J. Opt. Soc. Am. B 16,1204–12 (1999). [CrossRef]

]. In the small signal limit [13

G. Gallot and D. Grischkowsky, “Electro-optic detection of terahertz radiation.” J. Opt. Soc. Am. B 16,1204–12 (1999). [CrossRef]

], the field exiting a thin birefringence free EO crystal can be written as [12

S. P. Jamison, A. M. MacLeod, G. Berden, D. A. Jaroszynski, and W. A. Gillespie, “Temporally resolved electro-optic effect.” Opt. Lett. 31,1753–5 (2006). [CrossRef] [PubMed]

{\tilde{E}}^{y} (ω) = {\tilde{E}}_{opt} (ω) - iω B^{y} [{\tilde{E}}_{THz}^{eff} * {\tilde{E}}_{opt}] (ω),

(1)

{\tilde{E}}^{x} (ω) = - iω B^{x} [{\tilde{E}}_{THz}^{eff} * {\tilde{E}}_{opt}] (ω) .

(2)

The constants B^x ,B^y account for the efficiencies of sum- and difference-frequency mixing along x and y due to χ^x _eff and χ^y _eff, which are considered frequency independent within the detection bandwidth. Here we restrict our derivation to isotropic EO crystals. Typically, even isotropic EO crystals have some strain induced residual birefringence [14

Z. Jiang, F. G. Sun, Q. Chen, and X. C. Zhang, “Electro-optic sampling near zero optical transmission point.” Appl. Phys. Lett. 74,1191–3 (1999). [CrossRef]

]. We account for the small residual birefringence as a separate waveplate having a small phase shift Γ₁ with crystal axes oriented at an angle ϕ ₁ with respect to x -axis. For situations when the residual birefringence is not sufficient for coherent detection, a wave plate can be used. Let the orientation of the waveplate be ϕ ₂ and the corresponding phase shift be Γ₂. The field exits the analyzer detuned by a small angle, θ_d . Using the Jones calculus, this output field is given by

[\begin{matrix} {\tilde{E}}_{out}^{x} \\ {\tilde{E}}_{out}^{y} \end{matrix}] = [\begin{matrix} \cos (θ_{d}) & 0 \\ 0 & \sin (θ_{d}) \end{matrix}] M_{2} M_{1} [\begin{matrix} {\tilde{E}}^{x} \\ {\tilde{E}}^{y} \end{matrix}],

(3)

where M_1,2 are the Jones matrices corresponding to the residual birefringence and the wave-plate.

M_{1,2} = [\begin{matrix} a_{1,2} & - i b_{1,2} \\ - i b_{1,2} & a_{1,2}^{*} \end{matrix}] .

(4)

Here

a_{1,2} = e^{- i \frac{Γ_{1,2}}{2}} \cos^{2} (ϕ_{1,2}) + e^{i \frac{Γ_{1,2}}{2}} \sin^{2} (ϕ_{1,2}), and b_{1,2} = \sin (\frac{Γ_{1,2}}{2}) \sin (2 ϕ_{1,2})

are the Jones matrix coefficients [15

A. Yariv, Optical Electronics in Modern Communications , 5th ed. (Oxford University Press, 1997).

]. Since the residual birefringence is small, we can approximate a ₁≈1 and

b_{1} \approx \frac{Γ_{1}}{2} \sin (2 ϕ_{1})

. After simplification, we can write the output field after the analyzer as,

{\tilde{E}}_{out} (ω) = {\tilde{E}}_{opt} (ω) + ωα \exp (iθ) [{\tilde{E}}_{THz}^{eff} * {\tilde{E}}_{opt}] (ω),

(5)

E_{out} (t) = E_{opt} (t) - iα \exp (iθ) \frac{d}{dt} [E_{THz}^{eff} (t) E_{opt} (t)] .

(6)

In these equations,

α \exp (iθ) = \frac{B^{x} (a_{2} - b_{1} b_{2}) - i B^{y} (b_{2} + b_{1} a_{2})}{(b_{2} + b_{1} a_{2})}

and the proportionality constant, -i, is dropped.

For most practical scenarios these equations can be simplified further. Typically, the THz bandwidth is much narrower than the optical bandwidth, which in turn is much less than the optical carrier frequency, ω ₀. Rewriting ω=ω ₀+Δω and making the approximation Δω<<ω ₀, the first ω in the second term of Eq. (5) can be approximated to be ω ₀. With this approximation, Eqs. (5) and (6) are used to derive the following equations,

{\tilde{E}}_{out} (ω) = {\tilde{E}}_{opt} (ω) + a \exp (iθ) [{\tilde{E}}_{THz}^{eff} * {\tilde{E}}_{opt}] (ω),

(7)

E_{out} (t) = E_{opt} (t) [1 + a \exp (iθ) E_{THz}^{eff} (t)] .

(8)

Here a=αω ₀, is a real constant and t is the time in the group velocity frame of the optical pulse. We note that THz pulse bandwidths, ΔΩ, are always less than the optical frequency, ω ₀, by at least an order of magnitude. In most chirped probe pulse detection schemes, the THz pulse can be correctly resolved, provided, the probe has a slightly greater bandwidth than the THz pulse, that is ΔΩ≤Δω. This suggests that for the detection, we can always choose an optical chirped probe that easily satisfies the small bandwidth condition Δω<<ω ₀. Therefore, the small bandwidth approximation can always be satisfied during the THz pulse detection. However, if for some reason, the probe is derived from a few cycle pulse then it is necessary to use Eq. (5) and Eq. (6).

Alternatively, Eqs. (7) and (8) can also be derived using the time domain Eq. (6) under the slowly varying amplitude approximation. We write the fields in Eq. (6) in terms of their complex envelopes and carrier frequencies as E ^eff _THz(t)=A _THz(t), and E _opt(t)=A _opt(t)exp(iω ₀ t). Here we have assumed that the THz frequency is much less than the optical bandwidth. The derivative in Eq. (6) can be expressed as,

Fig. 1. (a) Schematic of experimental scheme for the verification of EO effect with chirped pulse. (b) Set-up for direct characterization of THz field.

\frac{d}{dt} [E_{THz}^{eff} (t) E_{opt} (t)] = \exp (i ω_{0} t) \frac{d}{dt} [A_{THz} (t) A_{opt} (t)] + i ω_{0} \exp (i ω_{0} t) A_{THz} (t) A_{opt} (t) .

(9)

Using the slowly varying amplitude approximation,

\frac{d}{dt} [A_{THz} (t) A_{opt} (t)] << ω_{0} A_{THz} (t) A_{opt} (t),

(10)

in Eq. (9), Eq. (6) can be written as Eq. (8). This approximation is valid when the total bandwidth of the optical field and THz field is much smaller than the optical carrier frequency.

Equations (7) and (8) represent the field in the general case when the background field is derived from a combination of methods. In practice the background needed for coherent detection is obtained from only one method. In most experiments, the residual birefringence is sufficiently large to enable coherent detection eliminating the need for a waveplate or analyzer detuning. For such cases, it can be shown that θ=0, and the commonly used description of the EO effect is applicable. However, when the EO crystal is thin and the residual birefringence cannot provide necessary background, an additional waveplate can be used. For the case of a quarter wave plate (QWP) at small angle,

θ = \frac{π}{4}

. For a half wave plate (HWP) at small angle,

θ = \frac{π}{2}

. Alternatively, the background needed for coherent detection can be obtained by detuning the analyzer. When no residual birefringence or waveplates are present, analyzer detuning results in

θ = \frac{π}{2}

3. Experimental verification

We verified these derivations with an experiment based on spectral in-line interferometry. The experimental verification involves a comparison of the direct measurement of spectral difference, ΔĨ=|Ẽ_out|²-|Ẽ_opt|², with the calculated spectral difference using Eq. (7) (or Eq. (8)). In order to calculate this difference, we experimentally measure the optical probe pulse and the THz pulse separately and use them with Eq. (8).

Our main experimental geometry is shown in Fig. 1(a), and it is similar to the single-shot THz detection schemes using a spectrometer [8

Z. P. Jiang and X. C. Zhang, “Electro-optic measurement of THz field pulses with a chirped optical beam,” Appl. Phys. Lett. 72,1945–1947 (1998). [CrossRef]

, 10

]. A 815 nm, 50 fs pulse from a regenerative amplifier is directed to a beamsplitter, where the intense fraction passes through a 1 mm thick ZnTe crystal generating a THz field, and the remaining fraction passes through a second beam-splitter creating two pulses of equal amplitude. Following the second beamsplitter, one pulse of this pulse-pair is chirped, while the other pulse of this pulse-pair is used as a short-probe useful for scanned detection of THz. These two pulses are recombined and aligned to traverse the same beam path through the polarizers, detector ZnTe crystal and the waveplate. By blocking one of the two pulses, we can realize either the setup shown in Fig. 1(a) or Fig. 1(b). A spectrometer is used with the chirped probe, while a photo-diode is used with the short probe.

Fig. 2. (a) Background spectrum, |Ẽ_opt|², of chirped optical probe in absence of THz field. (b) Modulated probe, |Ẽ_out|², in presence of THz field. (c) Temporal intensity profile of the probe pulse calculated using |Ẽ_opt|² and the spectral phase. (d) THz field measured directly using a short optical probe pulse.

The chirped probe pulse is derived from the 50 fs pulse using a grating stretcher. The stretcher consists of a pair of 1200 lpm grooved gratings in a standard geometry separated by 2.4 cm. This stretcher results in a calculated spectral phase, ϕ, which is characterized by the second and third order dispersion of

\frac{1}{2} \frac{d^{2} ϕ}{d ω^{2}} = - 3.9 \times 10^{4} {fs}^{2} and \frac{1}{6} \frac{d^{3} ϕ}{d ω^{3}} = 4.6 \times 10^{4} {fs}^{3}

respectively [16

D. J. Claude and R. Wolfgang, Ultrashort Laser Pulse Phenomena : Fundamentals Techniques and Applications on a Femtosecond Time Scale (Academic Press, 1996). [PubMed]

]. We also experimentally characterize the second order chirp by delaying the chirped probe with respect to the THz pulse and noting the shift in the difference spectrum, ΔĨ, as detailed in Refs. [8

Z. P. Jiang and X. C. Zhang, “Electro-optic measurement of THz field pulses with a chirped optical beam,” Appl. Phys. Lett. 72,1945–1947 (1998). [CrossRef]

, 10

]. The experimental GDD, -3.5×10⁴ fs², is close to the calculated value. The background probe spectrum (|Ẽ_opt|²) measured in absence of the THz field, using a 0.05 nm resolution imaging spectrometer, is plotted in Fig. 2(a). The spatial imaging dimension is used to verify that the probe pulse is free from space-time tilt. The spectrum has modulations due to multiple reflections from the beam splitters in the beam path, which result in some uncharacterized phase. Using the calculated second and third order dispersions and the optical spectrum, the probe temporal pulse shape is calculated and the intensity is plotted in Fig. 2(c).

For the EO mixing experiments, one of two different ZnTe crystals is used. The first crystal, 1 mm thick, has sufficient residual birefringence and does not require the use of an additional waveplate. The second crystal, 200 μm thick, is strain-free and has negligible birefringence. This crystal requires an additional waveplate or detuned analyzer. The THz field is characterized using a short-probe as shown in Fig. 1(b). The THz field measured with the first crystal (with no waveplate) is very similar to that measured using the second crystal and a QWP. The characterized THz field is plotted in Fig. 2(d).

Fig. 3. The blue curve is the directly measured spectral difference for a residual birefringence case (θ=0). The red curves are calculated spectral difference using (a) Eq. (8) and (b) using Eq. (6) of Ref [12

S. P. Jamison, A. M. MacLeod, G. Berden, D. A. Jaroszynski, and W. A. Gillespie, “Temporally resolved electro-optic effect.” Opt. Lett. 31,1753–5 (2006). [CrossRef] [PubMed]

] for various delays (T).

We verify the derived equations for four different cases outlined earlier, namely: residual birefringence (θ=0), QWP at small

(θ = \frac{π}{4})

, HWP at small angle

(θ = \frac{π}{2})

, and detuned analyzer

(θ = \frac{π}{2})

. For each of these cases, since θ is known, we can use the measured probe pulse shape and the THz pulse in Eq. (8) to calculate the spectral difference, ΔĨ. The only unknown in this calculation is the relative time delay between the probe pulse and the THz pulse, which is adjusted so that the calculated and measured spectral peaks line up. The calculated spectrum is compared with the direct measurement obtained by subtracting the background spectrum (|Ẽ_opt|²) from the spectrum measured in presence of THz (|Ẽ_out|²). A typical spectrum in presence of the THz is shown in Fig. 2(b). For the case of residual birefringence, we use the first crystal in between a pair of crossed crystal polarizers. The second crystal with negligible birefringence is used in the other cases. For the second and third cases, the QWP and HWP are oriented at an angle of ϕ ₂≈2^o respectively. For the last case, the analyzer is detuned by ≈ 1.5^o from the crossed position. The measured and calculated spectra for all the four cases are summarized in Fig. 4, and these results are discussed in detail later.

Just like many other schemes [8

Z. P. Jiang and X. C. Zhang, “Electro-optic measurement of THz field pulses with a chirped optical beam,” Appl. Phys. Lett. 72,1945–1947 (1998). [CrossRef]

, 9

, 10

] which compare a THz waveform obtained by a multi-shot scan with a single-shot method, there is naturally an unknown time-delay involved in our experiments. The unknown time delay arises because in either a multi-shot scan or a single-shot method, only the scale of the time axis -not the absolute time- is known. Typically, this unknown time delay can be determined by matching the peaks of the THz waveforms [8

Z. P. Jiang and X. C. Zhang, “Electro-optic measurement of THz field pulses with a chirped optical beam,” Appl. Phys. Lett. 72,1945–1947 (1998). [CrossRef]

, 9

, 10

Fig. 4. Comparison of directly measured difference spectra (blue lines) with the calculated difference spectra (red lines) using Eq. (8) for four different cases. (a) Residual birefringence (θ=0), (b) QWP at small angle

(θ = \frac{π}{4})

, (c) HWP at small angle

(θ = \frac{π}{2})

, and (d) detuned analyzer

(θ = \frac{π}{2})

In our experiments, we adjust the time delay so that the calculated and measured spectral differences agree both in shape as well as the wavelength position. Fig. 3 (a) shows our approach to determine the time delay for the first case (residual birefringence, θ=0). The red curves represent calculated difference spectra for various time delays (T). We notice that for T=5.8 ps, the measured and calculated spectra match closely. The red curves in Fig. 3(b) show the calculated difference spectra using Eq. (6) of Ref [12

S. P. Jamison, A. M. MacLeod, G. Berden, D. A. Jaroszynski, and W. A. Gillespie, “Temporally resolved electro-optic effect.” Opt. Lett. 31,1753–5 (2006). [CrossRef] [PubMed]

]. Obviously none of these curves agree with the measured difference spectra, indicating that Eq. (6) of Ref [12

S. P. Jamison, A. M. MacLeod, G. Berden, D. A. Jaroszynski, and W. A. Gillespie, “Temporally resolved electro-optic effect.” Opt. Lett. 31,1753–5 (2006). [CrossRef] [PubMed]

] does not describe the residual birefringence case.

We summarize our results for the four different cases in Fig. 4. For all these plots, the time delay is determined as mentioned before and it is approximately the same. From the figure, we see that there is an excellent agreement between the measured and calculated difference spectra (using Eq. (8)), verifying the validity of Eq. (8). We also used Eq. (6) instead of Eq. (8) and found that for all cases, the calculated spectra overlap, as expected, with the corresponding red curves in the Fig. 4. Next, we compared the calculated difference spectra obtained using the conventional equation [8] and the Eq. (6) of Ref [12

S. P. Jamison, A. M. MacLeod, G. Berden, D. A. Jaroszynski, and W. A. Gillespie, “Temporally resolved electro-optic effect.” Opt. Lett. 31,1753–5 (2006). [CrossRef] [PubMed]

], with the measured difference spectra. With the conventional equation, there is a match with Fig. 4(a) alone, indicating that the conventional equation describes only the residual birefringence case. With Eq. (6) of Ref [12

S. P. Jamison, A. M. MacLeod, G. Berden, D. A. Jaroszynski, and W. A. Gillespie, “Temporally resolved electro-optic effect.” Opt. Lett. 31,1753–5 (2006). [CrossRef] [PubMed]

], the curves match with Fig. 4(c) and Fig. 4(d). Thus the Eq. (6) of Ref [12

S. P. Jamison, A. M. MacLeod, G. Berden, D. A. Jaroszynski, and W. A. Gillespie, “Temporally resolved electro-optic effect.” Opt. Lett. 31,1753–5 (2006). [CrossRef] [PubMed]

] is only valid for the case of a HWP at small angle

(θ = \frac{π}{2})

or a detuned analyzer

(θ = \frac{π}{2})

4. THz retrieval with the new equation

Although several schemes exist for single-shot THz detection, the simplest techniques are the ones which use a single chirped probe arranged collinear to the THz field. In these schemes, the probe-bandwidth-limited THz field detection is only possible using a reconstruction technique along with a well characterized probe pulse. We have recently described two approaches [11

, 17

B. Yellampalle, K. Y. Kim, R. D. Averitt, G. Rodriguez, J. H. Glownia, and A. J. Taylor, “Single-shot high-resolution THz field reconstruction using phase-retrieval,” in Ultrafast Phenomena XV: Proceedings of the 15th International Conference (2006).

] for such a THz field reconstruction. Here we show that reconstruction approaches can be adapted to our new equation. The first reconstruction approach [11

] is based on matrix inversion, where the difference spectrum ΔĨ=|Ẽ_out|²-|Ẽ_opt|², is expressed as a linear matrix equation, ΔĨ=a B E ^eff _THz. Here B denotes a two dimensional matrix whose elements, using Eq. (6) are given by,

B_{ω, t} = {\tilde{E}}_{opt}^{*} (ω) E_{opt} (t) e^{iωt + iθ} + {\tilde{E}}_{opt} (ω) E_{opt}^{*} (t) e^{- iωt - iθ} .

(11)

The second reconstruction approach [17

] is based on phase-retrieval, where a guess field is iteratively updated while transforming between real and frequency domains. In this scheme, the frequency domain measured background is replaced, while in the time domain an error metric is minimized. For the new equation derived here, the error metric,

Δ = \frac{1}{N} \sum_{i = 0}^{N} ∣ E_{out} (t) = E_{opt} (t) [1 + a \exp (iθ) E_{THz}^{eff} (t)] ∣,

(12)

is minimized to obtain an update for the THz field, E ^eff _THz(t)

5. Conclusions

We have presented equations that describe the EO effect with chirped pulses in a typical single-shot THz measurement set-up. The conventional equation can be used when the EO crystal has sufficient residual birefringence. In the small signal limit, nearly all experimental schemes are described by the equation, E _out(t)=E _opt(t)[1+aexp(iθ)E ^eff _THz(t)], provided, the optical probe pulse is not derived from a few cycle pulse. We have experimentally verified this equation using spectral in-line interferometry. For an extremely broadband optical probe, derived from a few cycle pulse, the general equation is

E_{out} (t) = E_{opt} (t) - iα \exp (iθ) \frac{d}{dt} [E_{opt} (t) E_{THz}^{eff} (t)] .

Acknowledgments

This work was supported by the LDRD program at the Los Alamos National Laboratory.

References and links

1.	Q. Wu and X.-C. Zhang, “Free-space electro-optic sampling of terahertz beams,” Appl. Phys. Lett. 67,3523–3525 (1995). [CrossRef]
2.	I. Wilke, A. M. MacLeod, W. A. Gillespie, G. Berden, G. M. H. Knippels, and A. F. G. van der Meer, “Single-shot electron-beam bunch length measurements.” Phys. Rev. Lett. 88,124801–4 (2002). [CrossRef] [PubMed]
3.	G. Berden, S. P. Jamison, A. M. MacLeod, W. A. Gillespie, B. Redlich, and A. F. G. van der Meer, “Electro-optic technique with improved time resolution for real-time, nondestructive, single-shot measurements of femtosecond electron bunch profiles.” Phys. Rev. Lett. 93,114802–4 (2004). [CrossRef] [PubMed]
4.	J. van Tilborg, C. B. Schroeder, C. V. Filip, C. Toth, C. G. R. Geddes, G. Fubiani, R. Huber, R. A. Kaindl, E. Esarey, and W. P. Leemans, “Temporal characterization of femtosecond laser-plasma-accelerated electron bunches using terahertz radiation.” Phys. Rev. Lett. 96,014801–4 (2006). [CrossRef] [PubMed]
5.	K. Y. Kim, B. Yellampelle, J. H. Glownia, A. J. Taylor, and G. Rodriguez, “Terahertz-frequency electrical conductivity measurements of ultrashort laser-ablated plasmas,” Proceedings of SPIE - The International Society for Optical Engineering6261 II (2006).
6.	L. Bentson, P. Bolton, E. Bong, P. Emma, J. Galayda, J. Hastings, P. Krejcik, C. Rago, J. Rifkin, and C. M. Spencer, “FEL research and development at the SLAC sub-picosecond photon source, SPPS,” Nucl. Instrum. Methods Phys. Res. ,507,205–209 (2003). [CrossRef]
7.	T. Srinivasan-Rao, M. Amin, V. Castillo, D. M. Lazarus, D. Nikas, C. Ozben, Y. K. Semertzidis, A. Stillman, T. Tsang, and L. Kowalski, “Novel single shot scheme to measure submillimeter electron bunch lengths using electro-optic technique - art. no. 042801,” Phys. Rev. Spec. Top. -Accelerators and Beams 504,2801–2801 (2002).
8.	Z. P. Jiang and X. C. Zhang, “Electro-optic measurement of THz field pulses with a chirped optical beam,” Appl. Phys. Lett. 72,1945–1947 (1998). [CrossRef]
9.	S. P. Jamison, J. L. Shen, A. M. MacLeod, W. A. Gillespie, and D. A. Jaroszynski, “High-temporal-resolution, single-shot characterization of terahertz pulses.” Opt. Lett. 28,1710–12 (2003). [CrossRef] [PubMed]
10.	K. Y. Kim, B. Yellampalle, G. Rodriguez, R. D. Averitt, A. J. Taylor, and J. H. Glownia, “Single-shot, interferometric, high-resolution, terahertz field diagnostic,” Appl. Phys. Lett. 88,1–3 (2006).
11.	B. Yellampalle, K. Y. Kim, G. Rodriguez, J. H. Glownia, and A. J. Taylor, “Algorithm for high-resolution single-shot THz measurement using in-line spectral interferometry with chirped pulses.” Appl. Phys. Lett. 87,211109–1 (2005). [CrossRef]
12.	S. P. Jamison, A. M. MacLeod, G. Berden, D. A. Jaroszynski, and W. A. Gillespie, “Temporally resolved electro-optic effect.” Opt. Lett. 31,1753–5 (2006). [CrossRef] [PubMed]
13.	G. Gallot and D. Grischkowsky, “Electro-optic detection of terahertz radiation.” J. Opt. Soc. Am. B 16,1204–12 (1999). [CrossRef]
14.	Z. Jiang, F. G. Sun, Q. Chen, and X. C. Zhang, “Electro-optic sampling near zero optical transmission point.” Appl. Phys. Lett. 74,1191–3 (1999). [CrossRef]
15.	A. Yariv, Optical Electronics in Modern Communications , 5th ed. (Oxford University Press, 1997).
16.	D. J. Claude and R. Wolfgang, Ultrashort Laser Pulse Phenomena : Fundamentals Techniques and Applications on a Femtosecond Time Scale (Academic Press, 1996). [PubMed]
17.	B. Yellampalle, K. Y. Kim, R. D. Averitt, G. Rodriguez, J. H. Glownia, and A. J. Taylor, “Single-shot high-resolution THz field reconstruction using phase-retrieval,” in Ultrafast Phenomena XV: Proceedings of the 15th International Conference (2006).

OCIS Codes
(190.2620) Nonlinear optics : Harmonic generation and mixing
(320.7110) Ultrafast optics : Ultrafast nonlinear optics

ToC Category:
Ultrafast Optics

History
Original Manuscript: October 31, 2006
Revised Manuscript: January 20, 2007
Manuscript Accepted: January 21, 2007
Published: February 5, 2007

Citation
B. Yellampalle, K. Y. Kim, G. Rodriguez, J. H. Glownia, and A. J. Taylor, "Details of electro-optic terahertz detection with a chirped probe pulse," Opt. Express 15, 1376-1383 (2007)
http://www.opticsinfobase.org/oe/abstract.cfm?URI=oe-15-3-1376

Sort: Author | Year | Journal | Reset

References

Q. Wu and X.-C. Zhang, "Free-space electro-optic sampling of terahertz beams," Appl. Phys. Lett. 67, 3523-3525 (1995). [CrossRef]
I. Wilke, A. M. MacLeod,W. A. Gillespie, G. Berden, G. M. H. Knippels, and A. F. G. van der Meer, "Single-shot electron-beam bunch length measurements." Phys. Rev. Lett. 88, 124801-4 (2002). [CrossRef] [PubMed]
G. Berden, S. P. Jamison, A. M. MacLeod, W. A. Gillespie, B. Redlich, and A. F. G. van der Meer, "Electro-optic technique with improved time resolution for real-time, nondestructive, single-shot measurements of femtosecond electron bunch profiles." Phys. Rev. Lett. 93, 114802-4 (2004). [CrossRef] [PubMed]
J. van Tilborg, C. B. Schroeder, C. V. Filip, C. Toth, C. G. R. Geddes, G. Fubiani, R. Huber, R. A. Kaindl, E. Esarey, and W. P. Leemans, "Temporal characterization of femtosecond laser-plasma-accelerated electron bunches using terahertz radiation." Phys. Rev. Lett. 96, 014801-4 (2006). [CrossRef] [PubMed]
K. Y. Kim, B. Yellampelle, J. H. Glownia, A. J. Taylor, and G. Rodriguez, "Terahertz-frequency electrical conductivity measurements of ultrashort laser-ablated plasmas," Proc. SPIE 6261 II, 6261Q (2006).
L. Bentson, P. Bolton, E. Bong, P. Emma, J. Galayda, J. Hastings, P. Krejcik, C. Rago, J. Rifkin, and C. M. Spencer, "FEL research and development at the SLAC sub-picosecond photon source, SPPS," Nucl. Instrum. Methods Phys. Res., 507, 205-209 (2003). [CrossRef]
T. Srinivasan-Rao, M. Amin, V. Castillo, D. M. Lazarus, D. Nikas, C. Ozben, Y. K. Semertzidis, A. Stillman, T. Tsang, and L. Kowalski, "Novel single shot scheme to measure submillimeter electron bunch lengths using electro-optic technique - art. no. 042801," Phys. Rev. ST Accel. Beams 504, 042801-1-042801-7 (2002).
Z. P. Jiang and X. C. Zhang, "Electro-optic measurement of THz field pulses with a chirped optical beam," Appl. Phys. Lett. 72, 1945-1947 (1998). [CrossRef]
S. P. Jamison, J. L. Shen, A. M. MacLeod, W. A. Gillespie, and D. A. Jaroszynski, "High-temporal-resolution, single-shot characterization of terahertz pulses." Opt. Lett. 28, 1710-12 (2003). [CrossRef] [PubMed]
K. Y. Kim, B. Yellampalle, G. Rodriguez, R. D. Averitt, A. J. Taylor, and J. H. Glownia, "Single-shot, interferometric, high-resolution, terahertz field diagnostic," Appl. Phys. Lett. 88, 1-3 (2006).
B. Yellampalle, K. Y. Kim, G. Rodriguez, J. H. Glownia, and A. J. Taylor, "Algorithm for high-resolution singleshot THz measurement using in-line spectral interferometry with chirped pulses." Appl. Phys. Lett. 87, 211109-1 (2005). [CrossRef]
S. P. Jamison, A. M. MacLeod, G. Berden, D. A. Jaroszynski, and W. A. Gillespie, "Temporally resolved electrooptic effect." Opt. Lett. 31, 1753-5 (2006). [CrossRef] [PubMed]
G. Gallot and D. Grischkowsky, "Electro-optic detection of terahertz radiation." J. Opt. Soc. Am. B 16, 1204-12 (1999). [CrossRef]
Z. Jiang, F. G. Sun, Q. Chen, and X. C. Zhang, "Electro-optic sampling near zero optical transmission point." Appl. Phys. Lett. 74, 1191-3 (1999). [CrossRef]
A. Yariv, Optical Electronics in Modern Communications, 5th ed. (Oxford University Press, 1997).
D. J. Claude and R. Wolfgang, Ultrashort Laser Pulse Phenomena : Fundamentals Techniques and Applications on a Femtosecond Time Scale (Academic Press, 1996). [PubMed]
B. Yellampalle, K. Y. Kim, R. D. Averitt, G. Rodriguez, J. H. Glownia, and A. J. Taylor, "Single-shot highresolution THz field reconstruction using phase-retrieval," in Ultrafast Phenomena XV: Proceedings of the 15th International Conference (2006).

Amin, M.
Averitt, R. D.
Bentson, L.
Berden, G.
Bolton, P.
Bong, E.
Castillo, V.
Chen, Q.
Emma, P.
Esarey, E.
Filip, C. V.
Fubiani, G.
Galayda, J.
Gallot, G.
Geddes, C. G. R.
Gillespie, W. A.
Glownia, J. H.
Grischkowsky, D.
Hastings, J.
Huber, R.
Jamison, S. P.
Jaroszynski, D. A.
Jiang, Z.
Jiang, Z. P.
Kaindl, R. A.
Kim, K. Y.
Knippels, G. M. H.
Kowalski, L.
Krejcik, P.
Lazarus, D. M.
Leemans, W. P.
MacLeod, A. M.
Nikas, D.
Ozben, C.
Rago, C.
Redlich, B.
Rifkin, J.
Rodriguez, G.
Schroeder, C. B.
Semertzidis, Y. K.
Shen, J. L.
Spencer, C. M.
Srinivasan-Rao, T.
Stillman, A.
Sun, F. G.
Taylor, A. J.
Toth, C.
Tsang, T.
van der Meer, A. F. G.
van Tilborg, J.
Wilke, I.
Wu, Q.
Yellampalle, B.
Zhang, X. C.
Zhang, X.-C.

Appl. Phys. Lett.

Q. Wu and X.-C. Zhang, "Free-space electro-optic sampling of terahertz beams," Appl. Phys. Lett. 67, 3523-3525 (1995). [CrossRef]
Z. P. Jiang and X. C. Zhang, "Electro-optic measurement of THz field pulses with a chirped optical beam," Appl. Phys. Lett. 72, 1945-1947 (1998). [CrossRef]
Z. Jiang, F. G. Sun, Q. Chen, and X. C. Zhang, "Electro-optic sampling near zero optical transmission point." Appl. Phys. Lett. 74, 1191-3 (1999). [CrossRef]
K. Y. Kim, B. Yellampalle, G. Rodriguez, R. D. Averitt, A. J. Taylor, and J. H. Glownia, "Single-shot, interferometric, high-resolution, terahertz field diagnostic," Appl. Phys. Lett. 88, 1-3 (2006).
B. Yellampalle, K. Y. Kim, G. Rodriguez, J. H. Glownia, and A. J. Taylor, "Algorithm for high-resolution singleshot THz measurement using in-line spectral interferometry with chirped pulses." Appl. Phys. Lett. 87, 211109-1 (2005). [CrossRef]

J. Opt. Soc. Am. B

G. Gallot and D. Grischkowsky, "Electro-optic detection of terahertz radiation." J. Opt. Soc. Am. B 16, 1204-12 (1999). [CrossRef]

Nucl. Instrum. Methods Phys. Res.

L. Bentson, P. Bolton, E. Bong, P. Emma, J. Galayda, J. Hastings, P. Krejcik, C. Rago, J. Rifkin, and C. M. Spencer, "FEL research and development at the SLAC sub-picosecond photon source, SPPS," Nucl. Instrum. Methods Phys. Res., 507, 205-209 (2003). [CrossRef]

Opt. Lett.

Phys. Rev. Lett.

I. Wilke, A. M. MacLeod,W. A. Gillespie, G. Berden, G. M. H. Knippels, and A. F. G. van der Meer, "Single-shot electron-beam bunch length measurements." Phys. Rev. Lett. 88, 124801-4 (2002). [CrossRef] [PubMed]
G. Berden, S. P. Jamison, A. M. MacLeod, W. A. Gillespie, B. Redlich, and A. F. G. van der Meer, "Electro-optic technique with improved time resolution for real-time, nondestructive, single-shot measurements of femtosecond electron bunch profiles." Phys. Rev. Lett. 93, 114802-4 (2004). [CrossRef] [PubMed]
J. van Tilborg, C. B. Schroeder, C. V. Filip, C. Toth, C. G. R. Geddes, G. Fubiani, R. Huber, R. A. Kaindl, E. Esarey, and W. P. Leemans, "Temporal characterization of femtosecond laser-plasma-accelerated electron bunches using terahertz radiation." Phys. Rev. Lett. 96, 014801-4 (2006). [CrossRef] [PubMed]

Phys. Rev. ST Accel. Beams

T. Srinivasan-Rao, M. Amin, V. Castillo, D. M. Lazarus, D. Nikas, C. Ozben, Y. K. Semertzidis, A. Stillman, T. Tsang, and L. Kowalski, "Novel single shot scheme to measure submillimeter electron bunch lengths using electro-optic technique - art. no. 042801," Phys. Rev. ST Accel. Beams 504, 042801-1-042801-7 (2002).

Other

K. Y. Kim, B. Yellampelle, J. H. Glownia, A. J. Taylor, and G. Rodriguez, "Terahertz-frequency electrical conductivity measurements of ultrashort laser-ablated plasmas," Proc. SPIE 6261 II, 6261Q (2006).
A. Yariv, Optical Electronics in Modern Communications, 5th ed. (Oxford University Press, 1997).
D. J. Claude and R. Wolfgang, Ultrashort Laser Pulse Phenomena : Fundamentals Techniques and Applications on a Femtosecond Time Scale (Academic Press, 1996). [PubMed]
B. Yellampalle, K. Y. Kim, R. D. Averitt, G. Rodriguez, J. H. Glownia, and A. J. Taylor, "Single-shot highresolution THz field reconstruction using phase-retrieval," in Ultrafast Phenomena XV: Proceedings of the 15th International Conference (2006).

Cited By

Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.

Click here to see a list of articles that cite this paper