OSA's Digital Library

Optics Express

Optics Express

  • Editor: C. Martijin de Sterke
  • Vol. 15, Iss. 9 — Apr. 30, 2007
  • pp: 5879–5884
« Show journal navigation

Micrometer size polarisation independent depletion-type photonic modulator in Silicon On Insulator

F. Y. Gardes, K. L. Tsakmakidis, D. Thomson, G. T. Reed, G. Z. Mashanovich, O. Hess, and D. Avitabile  »View Author Affiliations


Optics Express, Vol. 15, Issue 9, pp. 5879-5884 (2007)
http://dx.doi.org/10.1364/OE.15.005879


View Full Text Article

Acrobat PDF (152 KB)





Browse Journals / Lookup Meetings

Browse by Journal and Year


   


Lookup Conference Papers

Close Browse Journals / Lookup Meetings

Article Tools

Share
Citations

Abstract

The trend in silicon photonics, in the last few years has been to reduce waveguide size to obtain maximum gain in the real estate of devices as well as to increase the performance of active devices. Using different methods for the modulation, optical modulators in silicon have seen their bandwidth increased to reach multi GHz frequencies. In order to simplify fabrication, one requirement for a waveguide, as well as for a modulator, is to retain polarisation independence in any state of operation and to be as small as possible. In this paper we provide a way to obtain polarisation independence and improve the efficiency of an optical modulator using a V-shaped pn junction base on the natural etch angle of silicon, 54.7 deg. This modulator is compared to a flat junction depletion type modulator of the same size and doping concentration.

© 2007 Optical Society of America

1. Introduction

Silicon photonics has experienced rapid development in recent years and several significant results have been reported, demonstrating the viability of the technology [1

1. L. Liao, D. Samara-Rubio, M. Morse, A. Liu, D. Hodge, D. Rubin, U. D. Keil, and T. Franck, High speed silicon mach-zehnder modulator, Opt. Express 13, 3129–3135 (2005). [CrossRef] [PubMed]

][2

2. A. Liu, R. Jones, O. Cohen, D. Hak, R. Nicolaescu, A. Fang, and M. Paniccla, “An all-silicon Raman laser,” Nature 433, 292–294 (2005). [CrossRef] [PubMed]

][3

3. Y.-H. Kuo, Y. K. Lee, Y. Ge, S. Ren, J. E. Roth, T. I. Kamins, D. A. B. Miller, and J. S. Harris, “Strong quantum-confined Stark effect in germanium quantum-well structures on silicon,” Nature 437, 1334–1336 (2005). [CrossRef] [PubMed]

][4

4. J. Wei, G. Lanlan, C. Xiaonan, and R. T. Chen, “80-micron interaction length silicon photonic crystal waveguide modulator,” Appl. Phys. Lett. 87, 221105–1 (2005).

][5

5. F. Y. Gardes, G. T. Reed, N. G. Emerson, and C. E. Png, “A sub-micron depletion-type photonic modulator in silicon on insulator,” Opt. Express 13, 8845–8854 (2005). [CrossRef] [PubMed]

]. In the design of an optical modulator, four factors are of major importance, the waveguide size, the bandwidth, the efficiency (Lπ.Vπ) and polarisation independence. The use of depletion modulators using a pn junction is an answer to the bandwidth requirement in silicon photonics as the speed is not limited by the minority carrier lifetime. The drawback of such a technology is that the length required to achieve a π phase shift in a rib waveguide is in the order of millimeters [5

5. F. Y. Gardes, G. T. Reed, N. G. Emerson, and C. E. Png, “A sub-micron depletion-type photonic modulator in silicon on insulator,” Opt. Express 13, 8845–8854 (2005). [CrossRef] [PubMed]

]. In order to improve the real estate of depletion modulators on an optical chip, the efficiency of these devices need to be improved. The solution could be to use smaller waveguide size as proposed in Ref. [5

5. F. Y. Gardes, G. T. Reed, N. G. Emerson, and C. E. Png, “A sub-micron depletion-type photonic modulator in silicon on insulator,” Opt. Express 13, 8845–8854 (2005). [CrossRef] [PubMed]

], where the confinement of the mode in a submicron waveguide increase the efficiency of the modulator. The issue with submicron waveguides is the need for efficient optical coupling for TE and TM polarization [6

6. G. Z. Masanovic, V. M. N. Passaro, and G. T. Reed, “Coupling to nanophotonic waveguides using a dual grating-assisted directional coupler,” IEE Proceedings: Optoelectronics 152, 41–48 (2005). [CrossRef]

], as well as losses in the waveguide due to surface roughness and fabrication tolerances. In this paper, we try to provide a solution to the remaining issues, by inserting a pn junction in a micrometer size waveguide which was demonstrated to be polarization independent in Ref. [7

7. W. R. Headley, G. T. Reed, S. Howe, A. Liu, and M. Paniccia, “Polarization-independent optical racetrack resonators using rib waveguides on silicon-on-insulator,” Appl. Phys. Lett. 85, 5523–5 (2004). [CrossRef]

]. The proposed modulator is a pn junction formed by a V-shape structure, as shown in Fig. 1(b). This structure will be compared to a more common structure [5

5. F. Y. Gardes, G. T. Reed, N. G. Emerson, and C. E. Png, “A sub-micron depletion-type photonic modulator in silicon on insulator,” Opt. Express 13, 8845–8854 (2005). [CrossRef] [PubMed]

] where a flat pn junction is used as shown in Fig. 1(a).

2. Device modelling

2.1. Optical modelling

Fig. 1. (A). Flat pn junction optical modulator in silicon on insulator. (B). V-shape pn junction optical modulator in silicon on insulator.

Table 1. Optical simulation parameters.

table-icon
View This Table
| View All Tables

2.2. Electrical modelling

The devices were modeled for both their static and dynamic behavior using Atlas, the device simulation package from Silvaco [9

9. Silvaco Internationnal, 4701 Patrick Henry Drive, Bldg 1, Santa Clara, CA 94054, http://www.silvaco.com.

]. Atlas device simulation framework predicts the electrical behavior of semiconductor devices. It provides a physics-based platform to analyse DC and time domain responses for semiconductor based technologies, by solving the equations which describe semiconductor physics such as Poisson’s equation and the charge continuity equations for holes and electrons. The simulator has been used to predict the free carrier concentrations in the waveguiding region of the devices for both DC and transient biasing conditions. The change in the free carrier profile is then converted to refractive index profile in the device using the expressions given by Soref and Bennett Eq. (2) of [8

8. R. A. Soref and B. R. Bennett, “Kramers-Kronig analysis of electro-optical switching in silicon,” presented at Proc. SPIE: Integrated Optical Circuit Engineering IV , 16–17 Sept. 1986, Cambridge, MA, USA, 1987, 32–37.

]). To determine the voltage associated with a p-phase shift, the change in concentration of free carriers must be known. Assuming a non uniform change in refractive index, the active device length required to produce the refractive index change associated with a π-phase shift is obtained approximately from the change in effective index.

Δneff=λ2Lπ
(1)

Where λ is the operating wavelength, Lπ is the active length of the modulator and Δneff is the change in effective index induced by the change in refractive index Δn in the waveguide. At 1.55 μm, which is also the operating wavelength for all simulations here, the refractive index change Δn is given by

Δn=Δne+Δnh=[8.8×1022×ΔNe+8.5×1018×ΔNh0.8]
(2)

where Δne is the change in refractive index resulting from the change in free electron concentration, Δnh is the change in refractive index resulting from the change in free hole concentration, ΔNh is the change in free holes concentration and ΔNe is the change in free electron concentration.

Table 2. Electrical simulation parameters.

table-icon
View This Table
| View All Tables

3. Simulation results

3.1. Waveguide structures

The two modulators are based on a polarisation independent, single mode rib waveguide published in Ref. [7

7. W. R. Headley, G. T. Reed, S. Howe, A. Liu, and M. Paniccia, “Polarization-independent optical racetrack resonators using rib waveguides on silicon-on-insulator,” Appl. Phys. Lett. 85, 5523–5 (2004). [CrossRef]

]. The dimensions are: Height, H=1.35 μm, Width, W=1 μm and etch depth, E=0.83 μm. The modulator structures are based on a wing design, proposed by Liao et al for the MOS capacitor modulator [1

1. L. Liao, D. Samara-Rubio, M. Morse, A. Liu, D. Hodge, D. Rubin, U. D. Keil, and T. Franck, High speed silicon mach-zehnder modulator, Opt. Express 13, 3129–3135 (2005). [CrossRef] [PubMed]

]. Both use the depletion of a pn junction in order to change the effective index of the mode propagating in the waveguide. The main difference between the modulators is the shape of the pn junction. Figure 1(B) shows the proposed polarisation independent V-shaped junction, this is created with an angle of 54.7 degrees which is the natural etch angle of silicon. Figure 1(A) shows a flat pn junction across the waveguide. As the two waveguides are approaching polarisation independence due to their design structure the aim is to show the differences in the phase shift for TE and TM polarisation between both designs while applying a reverse bias.

3.2. Efficiency of the modulator and positioning of the junction inside the waveguide

The simulations undertaken below are to determine the polarisation independence of the waveguide during modulation. Figures 2(A) and 2(B) show the phase shift achieved for different junction positions and voltages. Junction position is measured from the buried oxide in the case of the flat junction. In the case of the V-shaped junction, the position of the intersection between the sidewalls and the top of the ’V’ is measured from the buried oxide (see Fig. 1). Figure 2(A) shows similar results for the flat junction and Fig. 2(B) shows the simulation resulting from the V-shape junction. Each curve is a plot of the phase shift achieved, at a given bias voltage, as a function of position of the junction. In order to achieve polarisation independence during modulation the positioning of the junction inside the waveguide was changed and the phase shift was calculated for TE and TM, for reverse bias voltages varying from 0 to 10 volts. Figures 2(A) and 2(B) show that when the TE and TM curves intersect at a given bias voltage, polarisation independence is achieved for a specific junction position for both type of junctions and is consistently observed at the same depth for reverse bias varying between 0 and 10 volts. For the particular rib waveguide studied in this paper, polarisation independence is obtained at a depth of 0.87 μm for the v-shaped junction and 0.5 μm for the flat junction. Furthermore by considering taking the structure where polarisation independence is achieved, the best Lπ.Vπ efficiency is obtained for the v-shaped junction with Lπ.Vπ=2.5 V.cm compared to Lπ.Vπ=3.1Vcm for the flat junction.

Fig. 2. (A).Phase shift modulation dependence for TE and TM using a flat pn junction. (B). Phase shift modulation dependence for TE and TM using a V-shaped pn junction.
Fig. 3. (A). Phase shift against transient time for TE and TM for the flat junction. (B). Phase shift against transient time for TE and TM for the V-shaped junction.

These results show that the V-shaped pn junction can achieve the same efficiency as the modulator proposed in Ref. [5

5. F. Y. Gardes, G. T. Reed, N. G. Emerson, and C. E. Png, “A sub-micron depletion-type photonic modulator in silicon on insulator,” Opt. Express 13, 8845–8854 (2005). [CrossRef] [PubMed]

] without the problems involved with submicron waveguides. The efficiency of a modulator comes from the overlap of the mode profile and the refractive index variation due to the carrier distribution change. Hence the more carriers that are removed from the overlap region for a specific reverse bias, then the better the efficiency will be. The p type region, also play an important role in the efficiency as the concentration holes plays a more dominant role than the concentration of electrons in the refractive index change. Intuitively one would expect TE and TM modes to be affected equally if a junction could be fabricated at 45 degrees to the major TE and TM axes if the TE and TM axes were identical, but simply rotated by 90 degrees with respect to one another. However, because the mode shapes are different, some other angle is likely to be optimal. However, the flat junction will definitely not be optimal and will probably shows the most extreme polarisation dependence. That can be mitigated to some extent, by translation of the junction vertically. Thus it is not surprising that the flat junction shows more polarisation dependence than the V-shaped junction, which in turn, must be nearer to the optimal angle than the flat junction. The V-shaped junction will also be more phase efficient than the flat junction, simply because the V-shape results in a greater net length of the junction and hence in more net depletion.

The transients show that the rise and fall time are similar for the both types of junctions. For this type of doping, the V-shape junction has a rise time of 13 ps and a fall time of 23 ps for both TE and TM. For the flat junction the rise time is 12ps and the fall time is 21ps for both TE and TM. In both cases, this corresponds to an intrinsic bandwidth in excess of 15 GHz.

4. Conclusion

We have studied two 5 mm long depletion type modulators inserted in a micrometer size rib waveguide, that has already been demonstrated in Ref. [7

7. W. R. Headley, G. T. Reed, S. Howe, A. Liu, and M. Paniccia, “Polarization-independent optical racetrack resonators using rib waveguides on silicon-on-insulator,” Appl. Phys. Lett. 85, 5523–5 (2004). [CrossRef]

] to be polarisation independent and single mode. The two modulators have been simulated to maintain polarisation independence for a specific position of the junction inside the waveguide during modulation. The intrinsic bandwidth has been calculated to be above 15 GHz for both modulators while retaining polarisation independence. Furthermore the Lπ. Vπ performance metric for the V-shaped modulator equals that of the modulator proposed in Ref. [5

5. F. Y. Gardes, G. T. Reed, N. G. Emerson, and C. E. Png, “A sub-micron depletion-type photonic modulator in silicon on insulator,” Opt. Express 13, 8845–8854 (2005). [CrossRef] [PubMed]

] for the submicron depletion modulator, and exceeds that of [1

1. L. Liao, D. Samara-Rubio, M. Morse, A. Liu, D. Hodge, D. Rubin, U. D. Keil, and T. Franck, High speed silicon mach-zehnder modulator, Opt. Express 13, 3129–3135 (2005). [CrossRef] [PubMed]

]. The proposed modulator is therefore a serious candidate for optical modulation in silicon photonics easing some of the difficulties arising from designs based around sub-micrometer waveguides, whilst retaining polarisation independence and an efficiency comparable to sub-micrometer waveguide based depletion modulators.

References and links

1.

L. Liao, D. Samara-Rubio, M. Morse, A. Liu, D. Hodge, D. Rubin, U. D. Keil, and T. Franck, High speed silicon mach-zehnder modulator, Opt. Express 13, 3129–3135 (2005). [CrossRef] [PubMed]

2.

A. Liu, R. Jones, O. Cohen, D. Hak, R. Nicolaescu, A. Fang, and M. Paniccla, “An all-silicon Raman laser,” Nature 433, 292–294 (2005). [CrossRef] [PubMed]

3.

Y.-H. Kuo, Y. K. Lee, Y. Ge, S. Ren, J. E. Roth, T. I. Kamins, D. A. B. Miller, and J. S. Harris, “Strong quantum-confined Stark effect in germanium quantum-well structures on silicon,” Nature 437, 1334–1336 (2005). [CrossRef] [PubMed]

4.

J. Wei, G. Lanlan, C. Xiaonan, and R. T. Chen, “80-micron interaction length silicon photonic crystal waveguide modulator,” Appl. Phys. Lett. 87, 221105–1 (2005).

5.

F. Y. Gardes, G. T. Reed, N. G. Emerson, and C. E. Png, “A sub-micron depletion-type photonic modulator in silicon on insulator,” Opt. Express 13, 8845–8854 (2005). [CrossRef] [PubMed]

6.

G. Z. Masanovic, V. M. N. Passaro, and G. T. Reed, “Coupling to nanophotonic waveguides using a dual grating-assisted directional coupler,” IEE Proceedings: Optoelectronics 152, 41–48 (2005). [CrossRef]

7.

W. R. Headley, G. T. Reed, S. Howe, A. Liu, and M. Paniccia, “Polarization-independent optical racetrack resonators using rib waveguides on silicon-on-insulator,” Appl. Phys. Lett. 85, 5523–5 (2004). [CrossRef]

8.

R. A. Soref and B. R. Bennett, “Kramers-Kronig analysis of electro-optical switching in silicon,” presented at Proc. SPIE: Integrated Optical Circuit Engineering IV , 16–17 Sept. 1986, Cambridge, MA, USA, 1987, 32–37.

9.

Silvaco Internationnal, 4701 Patrick Henry Drive, Bldg 1, Santa Clara, CA 94054, http://www.silvaco.com.

10.

K. L. Tsakmakidis, C. Hermann, A. Klaedtke, C. Jamois, and O. Hess, “Systematic modal analysis of 3-D dielectric waveguides using conventional and high-accuracy nonstandard FDTD algorithms,” IEEE Photon. Technol. Lett. 17, 2598–2600 (2005). [CrossRef]

11.

K. L. Tsakmakidis, B. Weiss, and O. Hess, “Full-wave electromagnetic modelling of an InP/InGaAs travelling-wave heterojunction phototransistor,” J. Phys. D: Appl. Phys. 39, 1805–1814 (2006). [CrossRef]

OCIS Codes
(060.4080) Fiber optics and optical communications : Modulation
(250.5300) Optoelectronics : Photonic integrated circuits
(250.7360) Optoelectronics : Waveguide modulators

ToC Category:
Fiber Optics and Optical Communications

History
Original Manuscript: October 17, 2006
Revised Manuscript: March 28, 2007
Manuscript Accepted: April 7, 2007
Published: April 27, 2007

Citation
F. Y. Gardes, K. L. Tsakmakidis, D. Thomson, G. T. Reed, G. Z. Mashanovich, O. Hess, and D. Avitabile, "Micrometer size polarization independent depletion-type photonic modulator in Silicon On Insulator," Opt. Express 15, 5879-5884 (2007)
http://www.opticsinfobase.org/oe/abstract.cfm?URI=oe-15-9-5879


Sort:  Author  |  Year  |  Journal  |  Reset  

References

  1. L. Liao, D. Samara-Rubio, M. Morse, A. Liu, D. Hodge, D. Rubin, U. D. Keil and T. Franck, "High speed silicon mach-zehnder modulator," Opt. Express 13, 3129-3135 (2005). [CrossRef] [PubMed]
  2. A. Liu, R. Jones, O. Cohen, D. Hak, R. Nicolaescu, A. Fang, and M. Paniccla, "An all-silicon Raman laser," Nature 433, 292-294 (2005). [CrossRef] [PubMed]
  3. Y.-H. Kuo, Y. K. Lee, Y. Ge, S. Ren, J. E. Roth, T. I. Kamins, D. A. B. Miller, and J. S. Harris, "Strong quantumconfined Stark effect in germanium quantum-well structures on silicon," Nature 437, 1334-1336 (2005). [CrossRef] [PubMed]
  4. J. Wei, G. Lanlan, C. Xiaonan, and R. T. Chen, "80-micron interaction length silicon photonic crystal waveguide modulator," Appl. Phys. Lett. 87, 221105-1 (2005).
  5. F. Y. Gardes, G. T. Reed, N. G. Emerson, and C. E. Png, "A sub-micron depletion-type photonic modulator in silicon on insulator," Opt. Express 13, 8845-8854 (2005). [CrossRef] [PubMed]
  6. G. Z. Masanovic, V. M. N. Passaro, and G. T. Reed, "Coupling to nanophotonic waveguides using a dual gratingassisted directional coupler," IEE Proceedings Optoelectronics 152, 41-48 (2005). [CrossRef]
  7. W. R. Headley, G. T. Reed, S. Howe, A. Liu, and M. Paniccia, "Polarization-independent optical racetrack resonators using rib waveguides on silicon-on-insulator," Appl. Phys. Lett. 85, 5523-5 (2004). [CrossRef]
  8. R. A. Soref and B. R. Bennett, "Kramers-Kronig analysis of electro-optical switching in silicon," presented at Proc. SPIE: Integrated Optical Circuit Engineering IV, 16-17 Sept. 1986, Cambridge, MA, USA, 1987, 32-37.
  9. Silvaco Internationnal, 4701 Patrick Henry Drive, Bldg 1, Santa Clara, CA 94054, http://www.silvaco.com.
  10. K. L. Tsakmakidis, C. Hermann, A. Klaedtke, C. Jamois, and O. Hess, "Systematic modal analysis of 3-D dielectric waveguides using conventional and high-accuracy nonstandard FDTD algorithms," IEEE Photon. Technol. Lett. 17, 2598-2600 (2005). [CrossRef]
  11. K. L. Tsakmakidis, B. Weiss, and O. Hess, "Full-wave electromagnetic modelling of an InP/InGaAs travellingwave heterojunction phototransistor," J. Phys. D: Appl. Phys. 39, 1805-1814 (2006). [CrossRef]

Cited By

Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.

Figures

Fig. 1. Fig. 2. Fig. 3.
 

« Previous Article  |  Next Article »

OSA is a member of CrossRef.

CrossCheck Deposited