Magnetic plasmon modes in periodic chains of nanosandwiches

doi:10.1364/OE.16.003560

« Show journal navigation

Magnetic plasmon modes in periodic chains of nanosandwiches

S. M. Wang, T. Li, H. Liu, F. M. Wang, S. N. Zhu, and X. Zhang »View Author Affiliations

Optics Express, Vol. 16, Issue 6, pp. 3560-3565 (2008)
http://dx.doi.org/10.1364/OE.16.003560

View Full Text Article

Acrobat PDF (343 KB)

Journal Search
Article Lookup

Article Tools

Citations

Alert me when this article is cited
Export Citation/Save

Article Navigation

▸ Article Outline
– Abstract
1. Introduction
2. Fourier transformation (FT) method
3. Results and discussions
4. Conclusion
– References and links

Article Tools
Full Text
Article Info
References
Cited By
Figures
Metrics
Download PDF

Viewing Equations in the
HTML Article

Optimal Viewing Recommendations

Full Text
Article Info
References (16)
Cited By
Figures (3)
Metrics

Abstract

The magnetic plasmon (MP) modes in periodic chains of metallic trilayer nanostructures (nanosandwich) have been investigated numerically in optical frequency region. By employing the Fourier Transformation (FT) method, the MP modes excited in these chains can be observed directly. We have also used different exciting sources to excite the MP modes in the chain so that we can get clearer physics picture and richer information of the nanosandwich chain. For their long propagating lengths, the nanosandwich chains can well work as subwavelength waveguides to transport electromagnetic field. And one can easily tune the working frequencies and band width of the MP modes by changing the parameters of these chains.

1. Introduction

Recently, sub-wavelength waveguides made of chains of noble metal nanoparticles have attracted considerable attention [1

D. S. Citrin, “Coherent transport of excitons in quantum-dot chains: role of retardation,” Opt. Lett. 20, 901–903 (1995). [CrossRef] [PubMed]

, 2

M. L. Brogersma, J. H. Hartman, and H. A. Atwater, “Electromagnetic energy transfer and switching in nanoparticle chain arrays below the diffraction limit,” Phys. Rev. B 62, R16356–16359 (2000); S. A. Maier, M. L. Brogersma, P. G. Kik, S. Meltzer, A. A. G. Requicha, H. A. Atwater, “Plasmonics - A Route to Nanoscale Optical Devices”, Adv. Mater. 13, 1501–1505 (2001); S. A. Maiera and H. A. Atwater, “Plasmonics: Localization and guiding of electromagnetic energy in metal/dielectric structures,” J. Appl. Phys. 98, 011101 (2005). [CrossRef]

, 3

W. H. Weber and G. W. Ford, “Propagation of optical excitations by dipolar interactions in metal nanoparticle chains,” Phys. Rev. B 70, 125429 (2004). [CrossRef]

, 4

A. F. Koenderink and A. Polman, “Complex response and polariton-like dispersion splitting in periodic metal nanoparticle chains,” Phys. Rev. B 74, 033402 (2006). [CrossRef]

, 5

K. H. Fung and C. T. Chan, “Plasmonic modes in periodic metal nanoparticle chains: a direct dynamic eigenmode analysis,” Opt. Lett. 32, 973–975 (2007). [CrossRef] [PubMed]

, 6

N. Engheta, “Circuits with Light at Nanoscales: Optical Nanocircuits Inspired by Metamaterials,” Science 317, 1698–1702 (2007); M. Silveirinha, N. Engheta, “Circuit Elements at Optical Frequencies: Nanoinductors, Nanocapacitors, and Nanoresistors,” Phys. Rev. Lett. 97, 157403 (2006). [CrossRef] [PubMed]

]. Because of the strong coupling of surface plasmon resonances of the nanoparticles, electromagnetic field is highly confined around the chains. Therefore, these waveguide can even overcome the diffractive limit, which may have potential application in Integrated Optics. On the other hand, the sub-wavelength waveguide based on the magnetic plasmon (MP) excited in a chain of connected SSRRs (single split ring resonator) has also been reported [7

H. Liu, D. A. Genov, D. M. Wu, Y. M. Liu, J. M. Steele, C. Sun, S. N. Zhu, and X. Zhang, “Magnetic Plasmon Propagation Along a Chain of Connected Subwavelength Resonators at Infrared Frequencies,” Phys. Rev. Lett. 97, 243902 (2006). [CrossRef]

]. The merits of energy transport through MP have been presented, such as the low radiation loss and the long propagating length. However, the saturation of the magnetic response of the SRR (split ring resonator) at high frequency prevent this structure from higher frequency [8

J. Zhou, Th. Koschny, M. Kafesaki, E.N. Economou, J.B. Pendry, and C.M. Soukoulis, “Saturation of the Magnetic Response of Split-Ring Resonators at Optical Frequencies,” Phys. Rev. Lett. 95, 223902 (2005); M. W. Klein, C. Enkrich, M. Wegener, C. M. Soukoulis, and S. Linden, "Single-slit split-ring resonators at optical frequencies: limits of size scaling," Opt. Lett. 31, 1259–1261 (2006). [CrossRef] [PubMed]

]. And the complicated shape and narrow gap of the SSRRs keep us from experimentally investigating it.

To this end, scientists introduce many new structures to realize magnetic resonance in high frequency regime, such as fish-net [9

S. Zhang, W. Fan, N. C. Panoiu, K. J. Malloy, R. M. Osgood, and S. R. J. Brueck, “Experimental Demonstration of Near-Infrared Negative-Index Metamaterials,” Phys. Rev. Lett. 95, 137404 (2005). [CrossRef] [PubMed]

, 10

T. Li, J. Q. Li, F. M. Wang, Q. J. Wang, H. Liu, S. N. Zhu, and Y. Y. Zhu, “Exploring magnetic plasmon polaritons in optical transmission through hole arrays perforated in trilayer structures,” Appl. Phys. Lett. 90, 25112 (2007); G. Dolling, M. Wegener, A. Schadle, S. Bureger, and S. linden, “Observation of magnetization waves in negative-index photonic metamaterials,” Appl. Phys. Lett. 89, 231118 (2006).

, 11

T. Li, H. Liu, F. M. Wang, Z. G. Dong, S. N. Zhu, and X. Zhang, “Coupling effect of magnetic polariton in perforated metal/dielectric layered metamaterials and its influence on negative refraction transmission,” Opt. Express 14, 11155–11163 (2006). [CrossRef] [PubMed]

], nanorod pairs [12

F. M. Wang, H. Liu, T. Li, S. M. Wang, S. N. Zhu, Jie Zhu, and Wenwu Cao, “Highly confined energy propagation in a gap waveguide composed of two coupled nanorod chains,” Appl. Phys. Lett. 91, 133107 (2007). [CrossRef]

], and nanosandwich [14

V. M. Shalaev, W. Cai, U. K. Chettiar, H. Yuan, A. K. Sarychev, V. P. Drachev, and A. V. Kildishev, “Negative index of refraction in optical metamaterials,” Opt. Lett. 30, 3356–3358 (2005); H. K. Yuan, U. K. Chettiar, W. Cai, A. V. Kildishev, A. Boltasseva, V. P. Drachev, and V. M. Shalaev, “A negative permeability material at red light,” Opt. express 15, 1076–1083 (2007). [CrossRef]

, 15

G. Dolling, C. Enkrich, M. Wegener, C. M. Soukoulis, and S. Linden, “Simultaneous Negative Phase and Group Velocity of Light in a Metamaterial,” Science 312, 892–894 (2006); S. Linden, M. Decker, and M. Wegener, “Model System for a One-Dimensional Magnetic Photonic Crystal,” Phys. Rev. Lett. 97, 083902 (2006). [CrossRef] [PubMed]

]. It is shown that the negative permeability and even negative refractive index can be obtained from the fish-net and nanosandwich structures [9

, 14

, 15

]. The magnetic plasmon polariton (MPP) mode in the fish-net structures and the coupling of MPs in a three-metal-layer structure have also been reported recently [10

, 11

]. Additionally, using the magnetic resonance between two closely put nanorods, one can transport energy through a waveguide made of two coupled nanorod chains in high frequency regime [12

As one of the basic building block in Plasmonics, it is a good choice to use the nanosandwich structure to make a subwavelength waveguide in high frequency regime for its simple structure and high working frequency regime. Fig. 1(a) presents the geometry of single nanosandwich. Two metallic slabs are separated by a dielectric layer, with the metal being gold owning Drude-type dispersion, ω_p = 1.37×10¹⁶rad/s and γ = 12.24×10¹³rad/s [10

]. The dielectric layer and the outside environment is assumed to be glass with refractive index being 1.5. When placing an external magnetic field parallel to the dielectric layer, a large magnetic field can be excited in the middle layer. The excited magnetic field is recorded by a probe inserted into the middle of the dielectric layer, which is plotted in Fig. 1(b) as a function of frequency. At about 2.5×10¹⁴Hz, the magnetic field reach the peak, indicating a magnetic resonance. The magnetic field in z=0 plane is plotted in Fig. 1(c), in which a magnetic resonance is excited with the direction along y-axis. The electric field at y=0 plane is shown in Fig. 1(d). It is the anti-symmetric pair of electric dipoles that forms the magnetic resonance in the nanosandwich. The similar results have been reported by previous works [14

, 13

Jiangfeng Zhou, E. N. Economon, T. Koschny, and C. M. Soukoulis “Unifying approach to left-handed material design,” Opt. Lett. 31, 3620–3622 (2006). [CrossRef] [PubMed]

]. In fact, there exist higher magnetic modes in the nanosandwich at higher frequencies. For simplicity, we just investigate the coupling of the first magnetic resonant modes in the periodic chains of nanosandwiches in this work.

Fig. 1. The geometry of a nanosandwich is shown in (a), with h = 50nm and a = 200nm. The magnetic field at the middle layer of the nanosandwich is presented in (b) at the function of frequency. The magnetic field at z=0 and electric field at y=0 are plotted in (c) and (d).

2. Fourier transformation (FT) method

Before going to the results, we would like to mention something about the processing method used in this work. We use the finite-difference time-domain method (CST MICROWAVE STUDIO) to obtain the magnetic field distributions at different frequencies. An FT method is employed to do the transformation from spacial region to wave vector region, so that we can easily observe the value of magnetic field of every state in the ω-k space, and get the information of the MP modes excited in the chain according to their values [16

D. K. Gramotnev and D. F. P. Pile, “Single-mode subwavelength waveguide with channel plasmon-polaritons in triangular grooves on a metal surface,” Appl. Phys. Lett. 85, 6323–6325 (2004); Vitaliy Lomakin, Meng Lu, and Eric Michielssen, “Optical wave properties of nano-particle chains coupled with a metal surface,” Opt. Express 15, 11828–11842 (2007). [CrossRef]

H (ω, k) = \int H (ω, x) e^{ikx} dx

(1)

The conventional method to solve this coupled resonators problem is to use the dipole approximation considering each resonator to be a dipole [1

D. S. Citrin, “Coherent transport of excitons in quantum-dot chains: role of retardation,” Opt. Lett. 20, 901–903 (1995). [CrossRef] [PubMed]

, 2

, 3

W. H. Weber and G. W. Ford, “Propagation of optical excitations by dipolar interactions in metal nanoparticle chains,” Phys. Rev. B 70, 125429 (2004). [CrossRef]

, 4

A. F. Koenderink and A. Polman, “Complex response and polariton-like dispersion splitting in periodic metal nanoparticle chains,” Phys. Rev. B 74, 033402 (2006). [CrossRef]

, 5

K. H. Fung and C. T. Chan, “Plasmonic modes in periodic metal nanoparticle chains: a direct dynamic eigenmode analysis,” Opt. Lett. 32, 973–975 (2007). [CrossRef] [PubMed]

]. However, it is difficult to get an secular solution from the self-consistent coupled dipole equations in a realistic case, in which the radiation and retardation are included. Moreover, in this case, the magnetic field excited in the nanosandwich distributes in a wide area in the dielectric layer, which is better to be considered as an area rather than a point, especially for a close interparticle spacing. And the electric coupling between the nanosandwiches is complicated. By using the FT method, we needn’t consider the approximation and the coupling mechanism any more. We can directly get the excited MP modes from the FT results. Because the excited magnetic field in the nanosandwich concentrates in the middle layer and reach the peak at the middle plane, we just need to process the field along the chain at the middle plane. And since we pick up the magnetic field from the realistic model, using different exciting sources will lead to different MP modes excited in the chain.

3. Results and discussions

3.1. MP modes with different exciting sources

We assume that the nanosandwich chain is embedded in glass, with the periodicity of to be 250nm and the number of the periods to be 20. We firstly place a current line source (a current with length of 150nm and current I=1A) 200nm in front of the chain with the direction of current normal to the chain, so that the radiated magnetic field can excite the magnetic resonance in the nanosandwiches of the chain. The magnetic field in the middle plane z=0 and the electric field in y=0 plane are plotted in Fig. 2(a) and 2(b) at 2.7×10¹⁴Hz. It is shown that the magnetic resonances excited in the nanosandwiches with the direction perpendicular to the chain, which forms the magnetic plasmon in the chain. To show the sub-wavelength property, we also investigate the power flow in the chain and find the power flow is only confined in the middle dielectric layers in the nanosandwiches of the chain. The power flow at the last nanosandwich is plotted in Fig. 2(c). The field is confined in the space ranging from y=-125nm to y=125nm, which is smaller than the wavelength in glass (740nm).

The ω-k map calculated by FT method is shown in Fig. 2(e) with a sketch of the system plotted in Fig. 2(d). Different colors in the map correspond to different values of H(ω,k) calculated from Eq. 1 at the modes in the ω-k space. The large value of H(ω,k) corresponds to the excited MP mode of the modes. It is evident that a band of modes ranging from 2.8×10¹⁴Hz to 2.1×10¹⁴Hz are excited in the chain. We can conclude that these modes are caused by exciting of MP in the chain, since they just extend around the magnetic resonant frequency of single nanosandwich, which is quite similar with the energy band structure of 1D periodic atom chain in the solid state physics. The MP modes cross with the light line (the black dot line) at about 2.6×10¹⁴Hz, and they are divided into two parts by the light line. Above the light line, the MP modes are much weaker than those below the light line for their leaky property. And we also observed that the free propagating modes (corresponding to the light line) exist together with the MP mode above the light line.

As we have just mentioned, with different exciting sources, the way of the MP modes excited in the chain will change. We put a current line above the first nanosandwich with the current parallel to the chain, of which the sketch is shown in Fig. 2(f). Since the current line radiate weakly along the direction of the current, it can be considered that there is no magnetic field propagating along the chain and only the first nanosandwich is excited, while the magnetic field in other nanosandwiches are excited by the front ones. Because the electric field and magnetic field have the similar distribution pattern as the first case, we won’t show them here. After using the FT method, a clearer dispersion relation of the MP modes is presented in Fig. 2(g) in comparison with Fig. 2(e). Especially near the cross point with the light line, the MP modes anticross with the light line and are cut into two separate parts, which is quite similar with the results of eigenmodes of nanoparticle chains [4

A. F. Koenderink and A. Polman, “Complex response and polariton-like dispersion splitting in periodic metal nanoparticle chains,” Phys. Rev. B 74, 033402 (2006). [CrossRef]

]. Moreover, the strongest part of the MP modes is at the middle of MP modes below the light line, while in Fig. 2(e), the strongest part is closer to the cross point. Investigating the modes excited by the third exciting source will enable us to understand this phenomenon.

This time, we use a plane wave source to excite the MP modes in the chain. The sketch of the system is shown in Fig. 2(h) and the FT results are shown in Fig. 2(i). It is shown that only the MP modes below the light line still remain, while they are much weaker than the free propagating modes (corresponding to the light line). Those above the light line vanish. At the cross point between the light line and the MP modes, H(ω,k) reach the peak. It can be understood that the MPP is excited at this point, which resulting from the coupling between the plane wave and nanosandwich chain [10

]. As a result, when we compare it to the first and second cases in Fig. 2(e) and Fig. 2(g), we can conclude that the first case is the compound result of both the second and third case, because the magnetic field radiated by the current line in the first case can not only excite the magnetic resonance in the first nanosandwich (like the second case), but also propagate along the chain to excite the other nanosandwiches (like the third case). Therefore, by using the different exciting sources, we can get a clearer physics picture and rich information about the MP modes sustained in the nanosandwich chain, and the FT method is quite efficient in treating this structure.

Fig. 2. The magnetic field in z=0 plane, electric field in y=0 plane and the power flow in x=10µm are presented in (a)–(c), respectively. The red line in (c) corresponds to the power flow at z=0. The FT maps for three different sources are shown in (e), (g) and (i), with the sketches of the systems plotted in (d), (f) and (h).

3.2. Band engineering

We also investigate the decay coefficient α = 1/Im[k] in the chain with the number of period to be 200, which is shown in Fig.3(a). The shadow part corresponds to the MP modes. Two different patterns remark the two parts of modes above and below the light line, respectively. It is evident that the modes below the light line own smaller decay coefficients (longer propagating length) than those above the light line. The propagating length of the modes below the light line can be more than 10µm, whichenables the chain to play as a waveguide in the Integrate Optics. The working frequencies (the modes below the light line) of the waveguide can be as wide as about 5×10¹³Hz, ranging from 2.5×10¹⁴Hz to 3×10¹⁴Hz. By changing the interparticle spacing between the nanosandwiches of the chain, one can easily change the coupling between the nanosandwiches, in order to tune the working frequency and the band width of the MP modes. Fig.3(b) and Fig.3(c) present the excited MP modes and decay coefficients with interparticle spacing to be d = 225nm and d = 300nm, respectively. With a closer spacing, the coupling between nanosandwiches increases, leading to an extended band. Therefore, with d = 225nm, the band width is extended to twice the width, from 1.75×10¹⁴Hz to 3.1×10¹⁴Hz. And the propagating length also increases to more than 30µm in the part below the light line.

Fig. 3. The dispersion relation of k and α with (a) a = 200nm, d = 250nm; (b) a = 200nm, d = 225nm; (c) a = 200nm, d = 300nm; (d) a = 150nm, d = 250nm.

On the contrary, with a wider interparticle spacing, the coupling between the nanosandwiches reduces and the band of MP modes will shrink. With d = 300nm, the band width reduces to less than 0.15×10¹⁴Hz from 2.72×10¹⁴Hz to 2.6×10¹⁴Hz, which can be considered as a frequency filter, with the propagating length being more than 5µm below the light line. Besides changing the coupling to tune the MP mode band, one can also directly change the geometry of the nanosandwiches to engineer the MP resonance frequency. Fig.3(d) shows the dispersion relation of the excited MP modes in the chain with a = 150nm and d = 250nm. The MP modes are tuned to higher frequencies from 2.8×10¹⁴Hz to 3.25×10¹⁴Hz as well as the MP resonance frequency of single nanosandwich, which is not shown here. The working frequencies ranges from about 3.15×10¹⁴Hz to 3.25×10¹⁴Hz, with propagating length being more than 20µm.

4. Conclusion

We investigate the MP modes excited in periodic chains composed of nanosandwiches. The FT method is used to directly observe the MP modes in these chains. We get different results of excited MP modes by using different exciting sources, so that we can get a clear physics picture and more information of the system. We also find the nanosandwich chains have long propagating length, which enable them to work as subwavelength waveguides in the Integrated Optics. And the working frequencies and the band width of the excited MP modes can be easily tuned by changing the coupling between the nanosandwiches and directly modifying the magnetic resonance frequency of single nanosandwich.

Acknowledgments

This work was supported by the State Key Program for Basic Research of China (2004CB619003) and the National Natural Science Foundation of China under Contract Nos. 10604029, 10704036, 10534042, and 60578034.

References and links

1.	D. S. Citrin, “Coherent transport of excitons in quantum-dot chains: role of retardation,” Opt. Lett. 20, 901–903 (1995). [CrossRef] [PubMed]
2.	M. L. Brogersma, J. H. Hartman, and H. A. Atwater, “Electromagnetic energy transfer and switching in nanoparticle chain arrays below the diffraction limit,” Phys. Rev. B 62, R16356–16359 (2000); S. A. Maier, M. L. Brogersma, P. G. Kik, S. Meltzer, A. A. G. Requicha, H. A. Atwater, “Plasmonics - A Route to Nanoscale Optical Devices”, Adv. Mater. 13, 1501–1505 (2001); S. A. Maiera and H. A. Atwater, “Plasmonics: Localization and guiding of electromagnetic energy in metal/dielectric structures,” J. Appl. Phys. 98, 011101 (2005). [CrossRef]
3.	W. H. Weber and G. W. Ford, “Propagation of optical excitations by dipolar interactions in metal nanoparticle chains,” Phys. Rev. B 70, 125429 (2004). [CrossRef]
4.	A. F. Koenderink and A. Polman, “Complex response and polariton-like dispersion splitting in periodic metal nanoparticle chains,” Phys. Rev. B 74, 033402 (2006). [CrossRef]
5.	K. H. Fung and C. T. Chan, “Plasmonic modes in periodic metal nanoparticle chains: a direct dynamic eigenmode analysis,” Opt. Lett. 32, 973–975 (2007). [CrossRef] [PubMed]
6.	N. Engheta, “Circuits with Light at Nanoscales: Optical Nanocircuits Inspired by Metamaterials,” Science 317, 1698–1702 (2007); M. Silveirinha, N. Engheta, “Circuit Elements at Optical Frequencies: Nanoinductors, Nanocapacitors, and Nanoresistors,” Phys. Rev. Lett. 97, 157403 (2006). [CrossRef] [PubMed]
7.	H. Liu, D. A. Genov, D. M. Wu, Y. M. Liu, J. M. Steele, C. Sun, S. N. Zhu, and X. Zhang, “Magnetic Plasmon Propagation Along a Chain of Connected Subwavelength Resonators at Infrared Frequencies,” Phys. Rev. Lett. 97, 243902 (2006). [CrossRef]
8.	J. Zhou, Th. Koschny, M. Kafesaki, E.N. Economou, J.B. Pendry, and C.M. Soukoulis, “Saturation of the Magnetic Response of Split-Ring Resonators at Optical Frequencies,” Phys. Rev. Lett. 95, 223902 (2005); M. W. Klein, C. Enkrich, M. Wegener, C. M. Soukoulis, and S. Linden, "Single-slit split-ring resonators at optical frequencies: limits of size scaling," Opt. Lett. 31, 1259–1261 (2006). [CrossRef] [PubMed]
9.	S. Zhang, W. Fan, N. C. Panoiu, K. J. Malloy, R. M. Osgood, and S. R. J. Brueck, “Experimental Demonstration of Near-Infrared Negative-Index Metamaterials,” Phys. Rev. Lett. 95, 137404 (2005). [CrossRef] [PubMed]
10.	T. Li, J. Q. Li, F. M. Wang, Q. J. Wang, H. Liu, S. N. Zhu, and Y. Y. Zhu, “Exploring magnetic plasmon polaritons in optical transmission through hole arrays perforated in trilayer structures,” Appl. Phys. Lett. 90, 25112 (2007); G. Dolling, M. Wegener, A. Schadle, S. Bureger, and S. linden, “Observation of magnetization waves in negative-index photonic metamaterials,” Appl. Phys. Lett. 89, 231118 (2006).
11.	T. Li, H. Liu, F. M. Wang, Z. G. Dong, S. N. Zhu, and X. Zhang, “Coupling effect of magnetic polariton in perforated metal/dielectric layered metamaterials and its influence on negative refraction transmission,” Opt. Express 14, 11155–11163 (2006). [CrossRef] [PubMed]
12.	F. M. Wang, H. Liu, T. Li, S. M. Wang, S. N. Zhu, Jie Zhu, and Wenwu Cao, “Highly confined energy propagation in a gap waveguide composed of two coupled nanorod chains,” Appl. Phys. Lett. 91, 133107 (2007). [CrossRef]
13.	Jiangfeng Zhou, E. N. Economon, T. Koschny, and C. M. Soukoulis “Unifying approach to left-handed material design,” Opt. Lett. 31, 3620–3622 (2006). [CrossRef] [PubMed]
14.	V. M. Shalaev, W. Cai, U. K. Chettiar, H. Yuan, A. K. Sarychev, V. P. Drachev, and A. V. Kildishev, “Negative index of refraction in optical metamaterials,” Opt. Lett. 30, 3356–3358 (2005); H. K. Yuan, U. K. Chettiar, W. Cai, A. V. Kildishev, A. Boltasseva, V. P. Drachev, and V. M. Shalaev, “A negative permeability material at red light,” Opt. express 15, 1076–1083 (2007). [CrossRef]
15.	G. Dolling, C. Enkrich, M. Wegener, C. M. Soukoulis, and S. Linden, “Simultaneous Negative Phase and Group Velocity of Light in a Metamaterial,” Science 312, 892–894 (2006); S. Linden, M. Decker, and M. Wegener, “Model System for a One-Dimensional Magnetic Photonic Crystal,” Phys. Rev. Lett. 97, 083902 (2006). [CrossRef] [PubMed]
16.	D. K. Gramotnev and D. F. P. Pile, “Single-mode subwavelength waveguide with channel plasmon-polaritons in triangular grooves on a metal surface,” Appl. Phys. Lett. 85, 6323–6325 (2004); Vitaliy Lomakin, Meng Lu, and Eric Michielssen, “Optical wave properties of nano-particle chains coupled with a metal surface,” Opt. Express 15, 11828–11842 (2007). [CrossRef]

OCIS Codes
(240.6680) Optics at surfaces : Surface plasmons
(260.2030) Physical optics : Dispersion
(260.5740) Physical optics : Resonance

ToC Category:
Optics at Surfaces

History
Original Manuscript: November 8, 2007
Revised Manuscript: January 11, 2008
Manuscript Accepted: February 10, 2008
Published: March 3, 2008

Citation
S. M. Wang, T. Li, H. Liu, F. M. Wang, S. N. Zhu, and X. Zhang, "Magnetic plasmon modes in periodic chains of nanosandwiches," Opt. Express 16, 3560-3565 (2008)
http://www.opticsinfobase.org/oe/abstract.cfm?URI=oe-16-6-3560

Sort: Author | Year | Journal | Reset

References

D. S. Citrin, "Coherent transport of excitons in quantum-dot chains: role of retardation," Opt. Lett. 20, 901-903 (1995). [CrossRef] [PubMed]
M. L. Brogersma, J. H. Hartman, and H. A. Atwater, "Electromagnetic energy transfer and switching in nanoparticle chain arrays below the diffraction limit," Phys. Rev. B 62, R16356-16359 (2000);S. A. Maier, M. L. Brogersma, P. G. Kik, S. Meltzer, A. A. G. Requicha, H. A. Atwater, "Plasmonics - A Route to Nanoscale Optical Devices", Adv. Mater. 13, 1501-1505 (2001);S. A. Maiera and H. A. Atwater, "Plasmonics: Localization and guiding of electromagnetic energy in metal/dielectric structures," J. Appl. Phys. 98, 011101 (2005). [CrossRef]
W. H. Weber and G. W. Ford, "Propagation of optical excitations by dipolar interactions in metal nanoparticle chains," Phys. Rev. B 70, 125429 (2004). [CrossRef]
A. F. Koenderink and A. Polman, "Complex response and polariton-like dispersion splitting in periodic metal nanoparticle chains," Phys. Rev. B 74, 033402 (2006). [CrossRef]
K. H. Fung, C. T. Chan, "Plasmonic modes in periodic metal nanoparticle chains: a direct dynamic eigenmode analysis," Opt. Lett. 32, 973-975 (2007). [CrossRef] [PubMed]
N. Engheta, "Circuits with Light at Nanoscales: Optical Nanocircuits Inspired by Metamaterials," Science 317, 1698-1702 (2007);M. Silveirinha, N. Engheta, "Circuit Elements at Optical Frequencies: Nanoinductors, Nanocapacitors, and Nanoresistors," Phys. Rev. Lett. 97, 157403 (2006). [CrossRef] [PubMed]
H. Liu, D. A. Genov, D. M. Wu, Y. M. Liu, J. M. Steele, C. Sun, S. N. Zhu, and X. Zhang, "Magnetic Plasmon Propagation Along a Chain of Connected Subwavelength Resonators at Infrared Frequencies," Phys. Rev. Lett. 97, 243902 (2006). [CrossRef]
J. Zhou, Th. Koschny, M. Kafesaki, E. N. Economou, J. B. Pendry, and C. M. Soukoulis, "Saturation of the Magnetic Response of Split-Ring Resonators at Optical Frequencies," Phys. Rev. Lett. 95, 223902 (2005);M. W. Klein, C. Enkrich, M. Wegener, C. M. Soukoulis, and S. Linden, "Single-slit split-ring resonators at optical frequencies: limits of size scaling," Opt. Lett. 31, 1259-1261 (2006). [CrossRef] [PubMed]
S. Zhang, W. Fan, N. C. Panoiu, K. J. Malloy, R. M. Osgood, and S. R. J. Brueck, "Experimental Demonstration of Near-Infrared Negative-Index Metamaterials," Phys. Rev. Lett. 95, 137404 (2005). [CrossRef] [PubMed]
T. Li, J. Q. Li, F. M. Wang, Q. J. Wang, H. Liu, S. N. Zhu, and Y. Y. Zhu, "Exploring magnetic plasmon polaritons in optical transmission through hole arrays perforated in trilayer structures," Appl. Phys. Lett. 90, 25112 (2007);G. Dolling, M. Wegener, A. Schadle, S. Bureger, and S. linden, "Observation of magnetization waves in negative-index photonic metamaterials," Appl. Phys. Lett. 89, 231118 (2006).
T. Li, H. Liu, F. M. Wang, Z. G. Dong, S. N. Zhu, and X. Zhang, "Coupling effect of magnetic polariton in perforated metal/dielectric layered metamaterials and its influence on negative refraction transmission," Opt. Express 14, 11155-11163 (2006). [CrossRef] [PubMed]
F. M. Wang, H. Liu, T. Li, S. M. Wang, S. N. Zhu, J. Zhu, and W. Cao, "Highly confined energy propagation in a gap waveguide composed of two coupled nanorod chains," Appl. Phys. Lett. 91, 133107 (2007). [CrossRef]
J. Zhou, E. N. Economon, T. Koschny and C. M. Soukoulis, "Unifying approach to left-handed material design," Opt. Lett. 31, 3620-3622 (2006). [CrossRef] [PubMed]
V. M. Shalaev, W. Cai, U. K. Chettiar, H. Yuan, A. K. Sarychev, V. P. Drachev, and A. V. Kildishev, "Negative index of refraction in optical metamaterials," Opt. Lett. 30, 3356-3358 (2005);H. K. Yuan, U. K. Chettiar, W. Cai, A. V. Kildishev, A. Boltasseva, V. P. Drachev, and V. M. Shalaev, "A negative permeability material at red light," Opt. express 15, 1076-1083 (2007). [CrossRef]
G. Dolling, C. Enkrich, M. Wegener, C. M. Soukoulis, and S. Linden, "Simultaneous Negative Phase and Group Velocity of Light in a Metamaterial," Science 312, 892-894 (2006);S. Linden, M. Decker, and M. Wegener, "Model System for a One-Dimensional Magnetic Photonic Crystal," Phys. Rev. Lett. 97, 083902 (2006). [CrossRef] [PubMed]
D. K. Gramotnev and D. F. P. Pile, "Single-mode subwavelength waveguide with channel plasmon-polaritons in triangular grooves on a metal surface," Appl. Phys. Lett. 85, 6323-6325 (2004);V. Lomakin, M. Lu, and E. Michielssen, "Optical wave properties of nano-particle chains coupled with a metal surface," Opt. Express 15, 11828-11842 (2007). [CrossRef]

Cited By

Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.

Click here to see a list of articles that cite this paper