OSA's Digital Library

Optics Express

Optics Express

  • Editor: C. Martijn de Sterke
  • Vol. 18, Iss. 19 — Sep. 13, 2010
  • pp: 20164–20169
« Show journal navigation

Efficient holmium-doped fluoride fiber laser emitting 2.1 µm and blue upconversion fluorescence upon excitation at 2 µm

A. Guhur and S. D. Jackson  »View Author Affiliations


Optics Express, Vol. 18, Issue 19, pp. 20164-20169 (2010)
http://dx.doi.org/10.1364/OE.18.020164


View Full Text Article

Acrobat PDF (1960 KB)





Browse Journals / Lookup Meetings

Browse by Journal and Year


   


Lookup Conference Papers

Close Browse Journals / Lookup Meetings

Article Tools

Share
Citations

Abstract

We demonstrate a highly efficient and high power Ho3+-doped fluoride glass fiber laser that is resonantly pumped with a Tm3+-doped silicate glass fiber laser operating at 2.051 µm. The laser operates at 2080 nm and generated 6.66 W at a slope efficiency of 72%. We observe strong visible upconversion fluorescence centered at a variety of wavelengths including 491 nm which results from three sequential energy transfer upconversion processes; the fluorescence to pump energy ratio for this emission is one the largest reported to date.

© 2010 OSA

1. Introduction

Direct inband or resonant pumping of Ho3+-doped fibers and bulk crystalline materials offers a low quantum defect approach to the generation of shortwave infrared laser radiation at ~2.1 µm [1

1. P. A. Budni, M. L. Lemons, J. R. Mosto, and E. P. Chicklis, “High-power/high-brightness diode-pumped 1.9-µm thulium and resonantly pumped 2.1-µm holmium lasers,” IEEE J. Sel. Top. Quantum Electron. 6(4), 629–635 (2000). [CrossRef]

3

3. D. Y. Shen, A. Abdolvand, L. J. Cooper, and W. A. Clarkson, “Efficient Ho: YAG laser pumped by a cladding-pumped tunable Tm: silica-fibre laser,” Appl. Phys. B 79(5), 559–561 (2004). [CrossRef]

]. For significant scaling of the output, this approach allows the use of host materials e.g., fluoride crystals [4

4. J. W. Kim, J. I. Mackenzie, D. Parisi, S. Veronesi, M. Tonelli, and W. A. Clarkson, “Efficient in-band pumped Ho:LuLiF4 2 µ m laser,” Opt. Lett. 35(3), 420–422 (2010). [CrossRef] [PubMed]

] and glasses [5

5. S. D. Jackson, “Midinfrared holmium fiber lasers,” IEEE J. Quantum Electron. 42(2), 187–191 (2006). [CrossRef]

] for the Ho3+ ion that have thermomechanical properties that are comparatively weaker compared to oxide materials. Since Tm3+-based lasers in both bulk and fiber form is the preferred pump source, optical-to-optical efficiencies can be high because of the effective use of cross relaxation which can produce quantum efficiencies approaching 2. For applications requiring ~2.1 µm output and longer, inband pumping of Ho3+ appears to offer many advantages over direct diode excitation at 1150 nm [6

6. S. D. Jackson, F. Bugge, and G. Erbert, “Directly diode-pumped holmium fiber lasers,” Opt. Lett. 32(17), 2496–2498 (2007). [CrossRef] [PubMed]

] and indirect diode excitation using Tm3+ as a sensitizer [7

7. S. D. Jackson, A. Sabella, A. Hemming, S. Bennetts, and D. G. Lancaster, “High-power 83 W holmium-doped silica fiber laser operating with high beam quality,” Opt. Lett. 32(3), 241–243 (2007). [CrossRef] [PubMed]

].

Recently, we showed that Ho3+-doped ZBLAN fiber lasers (HFLs) can be effectively excited using a cladding-pumped Tm3+-doped silicate glass fiber laser (TFL) [5

5. S. D. Jackson, “Midinfrared holmium fiber lasers,” IEEE J. Quantum Electron. 42(2), 187–191 (2006). [CrossRef]

]. Using the free-running output from the TFL this initial demonstration produced 380 mW of 2.084 µm output at a slope efficiency of 50%. The advantage that Ho3+-doped ZBLAN glass fiber supplies over Ho3+-doped silicate glass fibers is the potential for 2.94 µm and visible wavelength emission. Whilst silicate glass has the advantage of good thermomechanical stability which can result in high power performance, direct upper laser level excitation using established sources of 2 µm radiation offers the potential for significant power scaling of fluoride glass fiber lasers. The use of standard-sized axially-symmetric step index fluoride glass fiber also alleviates some of the issues associated with larger diameter complex-shaped claddings.

In this investigation, we extend this work by demonstrating 6.66 W at a slope efficiency of 72% from a Ho3+-doped ZBLAN fiber laser. We illustrate the performance of the fiber laser as a function of fiber length and demonstrate high power and efficient operation for fiber lengths many times the absorption depth. Moreover, we demonstrate the generation of efficient visible upconversion emission to wavelengths as short as 491 nm thus demonstrating one of the largest reported upconversion emission processes.

2. Experimental setup

The pump laser was an in-house TFL that used a volume Bragg grating for wavelength stabilization at 2.051 µm. A schematic diagram of the experimental setup is shown in Fig. 1
Fig. 1 Experimental setup used for the measurements of the upconversion fluorescence. The high reflectivity mirror and Ge wafer were removed for the HFL experiments.
. The light from the pump laser was collimated and focused into the Ho3+-doped ZBLAN fiber using commercial triplet lenses coated for this wavelength range (99% transmission). The fiber laser resonator involved Fresnel reflection from each end of the fiber. To measure the light emitted from the pumped end of the fiber, an additional mirror was placed at a slight angle before the focusing lens and reflected 2.5% of the output from the HFL. The infrared spectra were measured using a double monochromator and the visible spectra were measured using an Ocean Optics USB4000. For the measurements of the upconversion emissions the unabsorbed TFL 790 nm pump light was removed using a mirror (highly reflecting at 0.79 µm and transmitting at 2.051 µm) and a polished Ge wafer. The area of the peaks at 2.051 µm and 2.08 µm in the infrared spectrum measured from the distal end of the fiber were used to determine the relative amount of transmitted pump and laser powers. From these measurements, we estimated that at above threshold 22% and 0% of the transmitted power from the distal end of the fiber comprised of unabsorbed pump light for the 0.56 and 1.1 m fiber lengths, respectively. The Ho3+-doped fluoride fiber (nominally ZBLAN and fabricated by FiberLabs, Japan) was doped to 5 mol.%, had a core diameter of 13 µm and a numerical aperture of 0.16. (The fiber laser was therefore emitting multimode output.) The measured background loss was 40 dB/km and 130 dB/km at 800 nm and 1400 nm, respectively.

Of critical importance to the experiment was the beam quality of the 2.051 µm emission from the pump laser. The Tm3+-doped core of the TFL was surrounded by a Ge-doped annulus [8

8. S. D. Jackson, A. Sabella, and D. G. Lancaster, “Application and development of high-power and highly efficient silica-based fiber lasers operating at 2 µm,” IEEE J. Quantum Electron. 13(3), 567–572 (2007). [CrossRef]

] that offsets the large refractive index step associated with the high concentration Tm3+ and Al3+ doped core; the numerical aperture of the 20 µm core as 0.14 and the V parameter was 4.3 at 2.051 µm. We launched the pump laser output into two commercial fibers; nLight PASSIVE-20/125 which was single mode (V = 2.1 guiding LP01 only at 2.051 µm) and Nufern MM-GSF-20-125-10A multimode fiber (V = 3.146 which guides both LP01 and LP11 modes). The Tm3+-doped silicate glass fiber was coiled to a 15 cm radius. The launch efficiency for the monomode and multimode fibers was 0.33 and 0.55, respectively. With these results, we estimated that 55% of the incident pump power was launched into the Ho3+-doped ZBLAN fiber because its V parameter was 3.27.

3. Experimental results

For the laser experiments, we tested three lengths of fiber. The output power as a function of the launched pump power is shown in Fig. 3
Fig. 3 Measured and normalized spectra of the laser output for fiber lasers employing the 0.525 m (red line) and 1.100 m (green line) fibers.
. For the medium length fiber, 6.66 W was generated at a slope efficiency of 72%. The threshold was 11 mW for this fiber length; this was extended to 69 mW for the shorter (0.34 m) length and to 301 mW for the longer length. The higher threshold for the 1.1 m fiber length is expected as a result of the increased amount of light reabsorption at 2.08 µm; however, whilst the 0.34 m fiber length is many times the absorption depth, the large transmission loss of the Fresnel-Fresnel resonator forced a higher threshold for this fiber length. For some fiber lengths threshold was reached when the visible fluorescence, emitted through the cladding of the fiber, was observed to reach the distal end of the fiber. For the shortest fiber, saturation of the output power was evident for launched pump powers >0.5 W.

Resonantly pumping the fiber at 2051 nm utilized approximately one third of the peak absorption cross section (i.e., 6.1 × 10 −25 m2) at 1950 nm; the calculated absorption coefficient in our fiber at 2051 µm was 1.4 cm−1. For each of the fibers we observed more output emitted from the pumped end of the fiber compared to the distal end. As a result of the large output coupling combined with the large asymmetric gain profile along the length of the fiber, we expect an unequal amount of output from each end. We also found using a single polarizer that both our pump laser and our Ho3+-doped ZBLAN fiber laser were elliptically polarized as shown in the inset to Fig. 2
Fig. 2 Laser output for a fiber length = 0.525 m (red circles) and 1.1 m (blue circles) with their respective linear fits and their slopes. The inset shows the output power from the pump (blue circles) and Ho3+-doped ZBLAN fiber laser (red circles) with respect to the angle of the polarizer.
. The polarization of the output from the Ho3+-doped ZBLAN fiber laser was offset by 40° from the polarization of the pump laser and exhibited stronger linear polarization.

The spectrum of the output for two fiber lengths is shown in Fig. 3. The Ho3+-doped ZBLAN fiber laser operated between 2080 nm and 2095 nm and we observed the typical wavelength shift as the fiber length was increased.

With incident pump power levels as low as a few mW, we observed fluorescence emission from the Ho3+-doped ZBLAN fiber. Figure 4
Fig. 4 Measured visible emission spectrum from the Ho3+-doped ZBLAN fiber. The launched pump power was 1 W and the fiber length = 0.525 m.
displays the spectrum of the output from the fiber laser in the visible region. We observed emission at 491 nm, 544 nm, 656 nm, 753 nm and 794 nm, corresponding respectively to the 5F35I8, 5S25I8, 5F35I7, 5S25I7 and the 5F25I6 transitions. Near infrared emission at 910 nm was also observed and corresponds to the 5I55I8 transition. It is clear from these results that high energy levels are populated despite the long wavelength of the pump laser. We postulate that three energy transfer upconversion (ETU) processes are producing excitation to the high energy levels; see Fig. 5
Fig. 5 Energy level diagram showing the upconversion processes. The red arrow represents GSA, the magenta arrows the ETU processes, the blue arrows the radiative transitions and the dashed arrows represent the non-radiative transitions
. Firstly, the ETU process (ETU1) 5I7, 5I75I8, 5I5 [9

9. N. P. Barnes, B. M. Walsh, and E. D. Filer, “Ho:Ho upconversion: application to Ho lasers,” J. Opt. Soc. Am. B 20(6), 1212 (2003). [CrossRef]

] populates the 5I6 level after the 5I5 level partially decays as a result of multiple phonon emission. A second ETU process (ETU2) 5I6, 5I65I8, 5F5 [10

10. A. F. H. Librantz, S. D. Jackson, L. Gomes, S. J. L. Ribeiro, and Y. Messaddeq, “Pump excited state absorption in holmium-doped fluoride glass,” J. Appl. Phys. 103(2), 023105 (2008). [CrossRef]

] continues the excitation to higher energy levels. Energy migration may play a role with these ETU processes given the relatively long lifetimes of the 5I7 and 5I6 levels which are ~12.5 ms and ~3.2 ms, respectively [11

11. M. Kowalska, G. Klocek, R. Piramidowicz, and M. Malinowski, “Ultra-violet emission in Ho:ZBLAN fiber,” J. Alloy. Comp. 380(1-2), 156–158 (2004). [CrossRef]

]. Finally, a third ETU process (ETU3) 5F5, 5I7 → (5F2,5F3), 5I8 [12

12. J. F. Pouradier and F. Auzel, “Etude de deux transfert d’energie non radiatifs entre ions Ho3+ dans le fluorure d’Yttrium; possibilite d’applications,” J. Phys. 37, 421 (1976). [CrossRef]

] can populate the energy levels responsible for the visible emission at 491 nm, 656 nm and 794 nm. The large Ho3+ concentration combined with intense pumping at 2 µm provides the conditions necessary for the three ETU processes to work efficiently.

4. Discussion

The large Ho3+ concentration allowed efficient rates of ETU but it would have impeded the performance of the 2.09 µm fiber laser. The maximum slope efficiency of 72% is still quite short of the Stokes limit of 98%; it is clear that ETU and reabsorption have reduced the overall efficiency, however not significantly. No attempt was made to isolate the HFL from the TFL; an issue given the fact that the emission wavelength from the HFL is within the gain bandwidth of the TFL. Whilst no fluctuations of the output were observed using the thermal power meter, the output from the TFL was not steady state because of the long Tm3+-doped silicate glass fiber used in our non-optimized TFL; the fluctuating visible emissions also indicated non-steady state behavior of the 2.1 µm output. The use of a prism would allow the output and pump light to be separated and since the output from the HLF was linearly polarized the use of a Faraday rotator would also allow some degree of isolation.

An opportunity now exists for the gain switching of the Ho3+-doped ZBLAN fiber laser in a similar way to Ho3+-doped silicate glass fiber lasers [14

14. K. S. Wu, D. Ottaway, J. Munch, D. G. Lancaster, S. Bennetts, and S. D. Jackson, “Gain-switched holmium-doped fibre laser,” Opt. Express 17(23), 20872–20877 (2009). [CrossRef] [PubMed]

]. The use of the efficient ETU process 5I6, 5I65I8, 5F5 prevented a population inversion large enough for the 5I65I7 transition to reach threshold therefore we did not observe 2.94 µm laser emission. Lower Ho3+ concentrations will reduce the rates for all three ETU processes but with strong pumping at 2 µm a “pair-pumped” 2.94 µm fiber laser may be demonstrated. The current fiber laser would benefit from the inscription of gratings [15

15. M. Bernier, D. Faucher, R. Vallée, A. Saliminia, G. Androz, Y. Sheng, and S. L. Chin, “Bragg gratings photoinduced in ZBLAN fibers by femtosecond pulses at 800 nm,” Opt. Lett. 32(5), 454–456 (2007). [CrossRef] [PubMed]

] written into the core to force output in one direction which may offer the possibility for narrow linewidth operation when constructed as a distributed feedback fiber laser.

4. Conclusion

We have demonstrated an efficient high power Ho3+-doped ZBLAN fiber laser when resonantly pumped at 2.051 µm. A non-optimized slope efficiency of 72% was demonstrated which could be further enhanced with reduced Ho3+ concentrations. The large concentration of 5 mol.% did however allow for the demonstration for triple ETU which resulted in blue emission that had fluorescent photon energies 4.2 times larger than the pump photon energy. This demonstration paves the way for a variety of new laser sources involving pulsed and narrow linewidth emission in the increasingly important 2.1 µm region of the shortwave infrared spectrum.

Acknowledgements

The authors would like to thank the Australian Research Council for financial support.

References and links

1.

P. A. Budni, M. L. Lemons, J. R. Mosto, and E. P. Chicklis, “High-power/high-brightness diode-pumped 1.9-µm thulium and resonantly pumped 2.1-µm holmium lasers,” IEEE J. Sel. Top. Quantum Electron. 6(4), 629–635 (2000). [CrossRef]

2.

M. Schellhorn, A. Hirth, and C. Kieleck, “Ho:YAG laser intracavity pumped by a diode-pumped Tm:YLF laser,” Opt. Lett. 28(20), 1933–1935 (2003). [CrossRef] [PubMed]

3.

D. Y. Shen, A. Abdolvand, L. J. Cooper, and W. A. Clarkson, “Efficient Ho: YAG laser pumped by a cladding-pumped tunable Tm: silica-fibre laser,” Appl. Phys. B 79(5), 559–561 (2004). [CrossRef]

4.

J. W. Kim, J. I. Mackenzie, D. Parisi, S. Veronesi, M. Tonelli, and W. A. Clarkson, “Efficient in-band pumped Ho:LuLiF4 2 µ m laser,” Opt. Lett. 35(3), 420–422 (2010). [CrossRef] [PubMed]

5.

S. D. Jackson, “Midinfrared holmium fiber lasers,” IEEE J. Quantum Electron. 42(2), 187–191 (2006). [CrossRef]

6.

S. D. Jackson, F. Bugge, and G. Erbert, “Directly diode-pumped holmium fiber lasers,” Opt. Lett. 32(17), 2496–2498 (2007). [CrossRef] [PubMed]

7.

S. D. Jackson, A. Sabella, A. Hemming, S. Bennetts, and D. G. Lancaster, “High-power 83 W holmium-doped silica fiber laser operating with high beam quality,” Opt. Lett. 32(3), 241–243 (2007). [CrossRef] [PubMed]

8.

S. D. Jackson, A. Sabella, and D. G. Lancaster, “Application and development of high-power and highly efficient silica-based fiber lasers operating at 2 µm,” IEEE J. Quantum Electron. 13(3), 567–572 (2007). [CrossRef]

9.

N. P. Barnes, B. M. Walsh, and E. D. Filer, “Ho:Ho upconversion: application to Ho lasers,” J. Opt. Soc. Am. B 20(6), 1212 (2003). [CrossRef]

10.

A. F. H. Librantz, S. D. Jackson, L. Gomes, S. J. L. Ribeiro, and Y. Messaddeq, “Pump excited state absorption in holmium-doped fluoride glass,” J. Appl. Phys. 103(2), 023105 (2008). [CrossRef]

11.

M. Kowalska, G. Klocek, R. Piramidowicz, and M. Malinowski, “Ultra-violet emission in Ho:ZBLAN fiber,” J. Alloy. Comp. 380(1-2), 156–158 (2004). [CrossRef]

12.

J. F. Pouradier and F. Auzel, “Etude de deux transfert d’energie non radiatifs entre ions Ho3+ dans le fluorure d’Yttrium; possibilite d’applications,” J. Phys. 37, 421 (1976). [CrossRef]

13.

M M. Pollnau, D. Gamelin, S. Lüthi, H. Güdel, and M. Hehlen, “Power dependence of upconversion luminescence in lanthanide and transition-metal-ion systems,” Phys. Rev. B 61(5), 3337–3346 (2000). [CrossRef]

14.

K. S. Wu, D. Ottaway, J. Munch, D. G. Lancaster, S. Bennetts, and S. D. Jackson, “Gain-switched holmium-doped fibre laser,” Opt. Express 17(23), 20872–20877 (2009). [CrossRef] [PubMed]

15.

M. Bernier, D. Faucher, R. Vallée, A. Saliminia, G. Androz, Y. Sheng, and S. L. Chin, “Bragg gratings photoinduced in ZBLAN fibers by femtosecond pulses at 800 nm,” Opt. Lett. 32(5), 454–456 (2007). [CrossRef] [PubMed]

OCIS Codes
(140.3070) Lasers and laser optics : Infrared and far-infrared lasers
(140.3510) Lasers and laser optics : Lasers, fiber

ToC Category:
Lasers and Laser Optics

History
Original Manuscript: July 26, 2010
Revised Manuscript: August 31, 2010
Manuscript Accepted: September 2, 2010
Published: September 7, 2010

Citation
A. Guhur and S. D. Jackson, "Efficient holmium-doped fluoride fiber laser emitting 2.1 µm and blue upconversion fluorescence upon excitation at 2 µm," Opt. Express 18, 20164-20169 (2010)
http://www.opticsinfobase.org/oe/abstract.cfm?URI=oe-18-19-20164


Sort:  Author  |  Year  |  Journal  |  Reset  

References

  1. P. A. Budni, M. L. Lemons, J. R. Mosto, and E. P. Chicklis, “High-power/high-brightness diode-pumped 1.9-µm thulium and resonantly pumped 2.1-µm holmium lasers,” IEEE J. Sel. Top. Quantum Electron. 6(4), 629–635 (2000). [CrossRef]
  2. M. Schellhorn, A. Hirth, and C. Kieleck, “Ho:YAG laser intracavity pumped by a diode-pumped Tm:YLF laser,” Opt. Lett. 28(20), 1933–1935 (2003). [CrossRef] [PubMed]
  3. D. Y. Shen, A. Abdolvand, L. J. Cooper, and W. A. Clarkson, “Efficient Ho: YAG laser pumped by a cladding-pumped tunable Tm: silica-fibre laser,” Appl. Phys. B 79(5), 559–561 (2004). [CrossRef]
  4. J. W. Kim, J. I. Mackenzie, D. Parisi, S. Veronesi, M. Tonelli, and W. A. Clarkson, “Efficient in-band pumped Ho:LuLiF4 2 µ m laser,” Opt. Lett. 35(3), 420–422 (2010). [CrossRef] [PubMed]
  5. S. D. Jackson, “Midinfrared holmium fiber lasers,” IEEE J. Quantum Electron. 42(2), 187–191 (2006). [CrossRef]
  6. S. D. Jackson, F. Bugge, and G. Erbert, “Directly diode-pumped holmium fiber lasers,” Opt. Lett. 32(17), 2496–2498 (2007). [CrossRef] [PubMed]
  7. S. D. Jackson, A. Sabella, A. Hemming, S. Bennetts, and D. G. Lancaster, “High-power 83 W holmium-doped silica fiber laser operating with high beam quality,” Opt. Lett. 32(3), 241–243 (2007). [CrossRef] [PubMed]
  8. S. D. Jackson, A. Sabella, and D. G. Lancaster, “Application and development of high-power and highly efficient silica-based fiber lasers operating at 2 µm,” IEEE J. Quantum Electron. 13(3), 567–572 (2007). [CrossRef]
  9. N. P. Barnes, B. M. Walsh, and E. D. Filer, “Ho:Ho upconversion: application to Ho lasers,” J. Opt. Soc. Am. B 20(6), 1212 (2003). [CrossRef]
  10. A. F. H. Librantz, S. D. Jackson, L. Gomes, S. J. L. Ribeiro, and Y. Messaddeq, “Pump excited state absorption in holmium-doped fluoride glass,” J. Appl. Phys. 103(2), 023105 (2008). [CrossRef]
  11. M. Kowalska, G. Klocek, R. Piramidowicz, and M. Malinowski, “Ultra-violet emission in Ho:ZBLAN fiber,” J. Alloy. Comp. 380(1-2), 156–158 (2004). [CrossRef]
  12. J. F. Pouradier and F. Auzel, “Etude de deux transfert d’energie non radiatifs entre ions Ho3+ dans le fluorure d’Yttrium; possibilite d’applications,” J. Phys. 37, 421 (1976). [CrossRef]
  13. M M. Pollnau, D. Gamelin, S. Lüthi, H. Güdel, and M. Hehlen, “Power dependence of upconversion luminescence in lanthanide and transition-metal-ion systems,” Phys. Rev. B 61(5), 3337–3346 (2000). [CrossRef]
  14. K. S. Wu, D. Ottaway, J. Munch, D. G. Lancaster, S. Bennetts, and S. D. Jackson, “Gain-switched holmium-doped fibre laser,” Opt. Express 17(23), 20872–20877 (2009). [CrossRef] [PubMed]
  15. M. Bernier, D. Faucher, R. Vallée, A. Saliminia, G. Androz, Y. Sheng, and S. L. Chin, “Bragg gratings photoinduced in ZBLAN fibers by femtosecond pulses at 800 nm,” Opt. Lett. 32(5), 454–456 (2007). [CrossRef] [PubMed]

Cited By

Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.


« Previous Article  |  Next Article »

OSA is a member of CrossRef.

CrossCheck Deposited