OSA's Digital Library

Optics Express

Optics Express

  • Editor: C. Martijn de Sterke
  • Vol. 18, Iss. 24 — Nov. 22, 2010
  • pp: 24654–24660
« Show journal navigation

A spectrally tunable microstructured optical fibre Bragg grating utilizing an infiltrated ferrofluid

A. Candiani, M. Konstantaki, W. Margulis, and S. Pissadakis  »View Author Affiliations


Optics Express, Vol. 18, Issue 24, pp. 24654-24660 (2010)
http://dx.doi.org/10.1364/OE.18.024654


View Full Text Article

Acrobat PDF (914 KB)





Browse Journals / Lookup Meetings

Browse by Journal and Year


   


Lookup Conference Papers

Close Browse Journals / Lookup Meetings

Article Tools

Share
Citations

Abstract

The spectral response of a Bragg grating reflector inscribed in a microstructured optical fibre is tuned by employing an infiltrated ferrofluid, while modifying the overlap of the ferrofluidic medium with the grating length. Significant spectral changes in terms of Bragg grating wavelength shift and extinction ratio were obtained under static magnetic field actuation. Spectral measurements revealed non-bidirectional propagation effects dependent upon the relative position between the ferrofluid and the grating. The actuation speed of the device was measured to be of the order of few seconds.

© 2010 OSA

1. Introduction

The unique configuration of guided wave propagation in the close vicinity of a microfludic capillary structure, which exists in the geometry of a microstructured optical fibre (MOF), constitutes a versatile platform for the development of novel and functional photonic devices [1

1. St. J. Philip, “Photonic-Crystal Fibers,” J. Lightwave Technol. 24(12), 4729–4749 (2006). [CrossRef]

,2

2. C. Monat, P. Domachuk, and B. J. Eggleton, “Integrated optofluidics: A new river of light,” Nat. Photonics 1(2), 106–114 (2007). [CrossRef]

]. In MOFs, the guiding mode that is confined in the microstructured solid or hollow core partially interacts with the medium infiltrated capillary, while it is subjected to refractive index, scattering or optical absorption changes, affecting its phase and power carrying properties. There are several examples where the micrometric diameter capillaries of MOFs are infiltrated using gas [3

3. F. Benabid, F. Couny, J. C. Knight, T. A. Birks, and P. S. Russell, “Compact, stable and efficient all-fibre gas cells using hollow-core photonic crystal fibres,” Nature 434(7032), 488–491 (2005). [CrossRef] [PubMed]

] or liquid [4

4. D. K. C. Wu, B. T. Kuhlmey, and B. J. Eggleton, “Ultrasensitive photonic crystal fiber refractive index sensor,” Opt. Lett. 34(3), 322–324 (2009). [CrossRef] [PubMed]

] matrices for developing specific sensing [5

5. T. Ritari, J. Tuominen, H. Ludvigsen, J. Petersen, T. Sørensen, T. Hansen, and H. Simonsen, “Gas sensing using air-guiding photonic bandgap fibers,” Opt. Express 12(17), 4080–4087 (2004), http://www.opticsinfobase.org/abstract.cfm?URI=oe-12-17-4080. [CrossRef] [PubMed]

] or actuating/switching [6

6. T. Larsen, A. Bjarklev, D. Hermann, and J. Broeng, “Optical devices based on liquid crystal photonic bandgap fibres,” Opt. Express 11(20), 2589–2596 (2003), http://www.opticsinfobase.org/oe/abstract.cfm?URI=oe-11-20-2589. [CrossRef] [PubMed]

] fibre devices. The inscription of Bragg or long-period gratings into microstructured optical fibres has been proven to be a quite efficient interrogation scheme [7

7. B. Eggleton, C. Kerbage, P. Westbrook, R. Windeler, and A. Hale, “Microstructured optical fiber devices,” Opt. Express 9(13), 698–713 (2001), http://www.opticsinfobase.org/oe/abstract.cfm?URI=oe-9-13-698. [CrossRef] [PubMed]

,8

8. A. Cusano, D. Paladino, and A. Iadicicco, “Microstructured Fibre Bragg Gratings,” J. Lightwave Technol. 27(11), 1663–1697 (2009). [CrossRef]

]. Infiltrated Bragg and long period microstructured optical fibre gratings have been used as actuating devices by employing external heating elements [7

7. B. Eggleton, C. Kerbage, P. Westbrook, R. Windeler, and A. Hale, “Microstructured optical fiber devices,” Opt. Express 9(13), 698–713 (2001), http://www.opticsinfobase.org/oe/abstract.cfm?URI=oe-9-13-698. [CrossRef] [PubMed]

] [9

9. Y. Wang, W. Jin, L. Jin, X. Tan, H. Bartelt, W. Ecke, K. Moerl, K. Schroeder, R. Spittel, R. Willsch, J. Kobelke, M. Rothhardt, L. Shan, and S. Brueckner, “Optical switch based on a fluid-filled photonic crystal fiber Bragg grating,” Opt. Lett. 34(23), 3683–3685 (2009). [CrossRef] [PubMed]

] or voltage trimming [10

10. L. Wei, J. Weirich, T. T. Alkeskjold, and A. Bjarklev, “On-chip tunable long-period grating devices based on liquid crystal photonic bandgap fibers,” Opt. Lett. 34(24), 3818–3820 (2009). [CrossRef] [PubMed]

]; while in other cases have been used as ultra-sensitive refractometers [11

11. L. Rindorf and O. Bang, “Highly sensitive refractometer with a photonic-crystal-fiber long-period grating,” Opt. Lett. 33(6), 563–565 (2008). [CrossRef] [PubMed]

,12

12. O. Frazão, T. Martynkien, J. M. Baptista, J. L. Santos, W. Urbanczyk, and J. Wojcik, “Optical refractometer based on a birefringent Bragg grating written in an H-shaped fiber,” Opt. Lett. 34(1), 76–78 (2009). [CrossRef]

].

Herein, we spectrally tune a Bragg grating inscribed in a microstructured optical fibre by utilizing an infiltrated ferrofluidic medium. A ferrofluid is a stable colloidal suspension of sub-domain magnetic micro-/nano-particles dispersed inside a liquid carrier [13

13. R. E. Rosenweig, “Ferrohydrodynamics,” (Dover, New York 1997)

]. In the presence of a magnetic field the magnetic moments of the particles orient along the field lines and magnetization of the fluid occurs. Such magnetisation results in volume and viscosity changes, which in turn and under specific conditions can be exploited in controllable liquid spatial translation. Ferrofluids have attracted significant attention due to their rheological and optical and thermal properties in applications such as microfluidic micropumps [14

14. C. Yamahata, M. Chastellain, V. K. Parashar, A. Petri, H. Hofmann, and M. A. M. Gijs, “Plastic micropump with ferrofluidic actuation,” J. Microelectromech. Syst. 14(1), 96–102 (2005). [CrossRef]

], in-line optical power modulators [15

15. H. E. Horng, J. J. Chieh, Y. H. Chao, and S. Y. Yang, “Designing optical-fibre modulators by using magnetic fluids,” Opt. Lett. 30, 543–545 (2005). [CrossRef] [PubMed]

], in adaptable lithographic techniques [16

16. B. B. Yellen, G. Fridman, and G. Friedman, “Ferrofluid lithography,” Nanotechnology 15(10), S562–S565 (2004). [CrossRef]

] and in-fiber gain control [17

17. H. Labidi, J.-J. Guerin, V. Girardon, X. Bonnet, C. Simonneau, R. Boucenna, C. de Barros, N. Daley, and I. Riant, “Dynamic gain control of optical amplifier using an all-fibre solution” 28th European Conference on Optical Communication ECOC, PD1.8, page 1–2, Vol 5, Copenhagen, 8–12 Sept. 2002B.B.

]. Recently, we have used ferrofluids as long-period gratings outcladdings for tuning their transmission spectrum in an actuation mode, wherein the ferrofluidic medium is translated across the long-period grating length [18

18. A. Candiani, M. Konstantaki, S. Pissadakis, “Magnetic Tuning of Optical Fibre Long Period Gratings,” CLEO-Europe 2009, CH4.2.

]. In this manuscript, we experimentally demonstrate that by using a static magnetic field and suitable surface functionalisation processing of the microstructured fibres capillaries, we can efficiently translate a dense ferrofluidic medium along the fibre length; and accordingly tune the spectrum of a Bragg grating reflector inscribed in the fibre core. The spectral data obtained are studied in transmission and reflection mode, for indentifying spectral shift and extinction ratio changes in the spectrum of the Bragg grating interrogator. This MOF device is the first demonstration step towards the development of magnetically tuneable opto-fluidic devices [19

19. D. Psaltis, S. R. Quake, and C. Yang, “Developing optofluidic technology through the fusion of microfluidics and optics,” Nature 442(7101), 381–386 (2006). [CrossRef] [PubMed]

] utilising dispersed magnetic nanoparticles solutions.

2. Experimental

The commercial hydrocarbon based ferrofluid EMG905, manufactured by Ferrotec and having 7.1% of volume concentration of magnetite (Fe3O4) was used. The EMG905 ferrofluid exhibits a 40mT saturable magnetization, 9mPas viscosity and the size of the Fe3O4 dispersed particles is 10nm, while its carrier liquid is a synthetic isoparaffinic solvent. The EMG905 ferrofluid is practically opaque since its absorption loss at 1550nm was measured to be 6.84μm−1, while its refractive index was measured to be 1.58±0.01.

A stepper motor was employed to precisely move at a constant speed the magnetic fluid along the fibre capillaries. The infiltrated grating was spectrally characterized simultaneously in transmission and reflection mode, using a broadband source and two optical spectrum analyzers. The optical signal was injected into the microstructured optical fibre for reaching the grating first and then the ferrofluidic infiltrated section. The above state was considered as State A (see Fig. 2a
Fig. 2 (a) Schematic of the ferrofluid infiltrated MOF-Bragg grating. For the specific position of the ferrofluid the MOF Bragg grating actuator is at State A. (b) Overview picture of a ferrofluid infiltrated MOF with the actuating magnet on the bottom. Minimum scale=1/32 inch. (c) Close view of the MOF, for depicting the “grey” length of the in-fibre infiltrated ferrofluid.
), from which the ferrofluid was translated towards the grating vicinity. Accordingly, the grating is half-length covered with ferrofluid when the distance Ox is equal to a nominal value of 2mm (see Fig. 2a). Finally, when the ferrofluid is placed between the grating and the light injection side, we consider it as State B.

3. Results and discussion

Transmission spectral measurements were obtained from the infiltrated MOF Bragg reflector for both of the guiding modes scattered (see Fig. 3
Fig. 3 Transmission spectra contour graph of the ferrofluid infiltrated MOF Bragg reflector, for different values of the coordination Ox defining the overlap of the ferrofluid with the grating.
and 4
Fig. 4 Transmission data for Bragg wavelength shift and grating strength (extinction ratio) changes, for the 0th and the 1st guiding modes scattered by the infiltrated, MOF- reflector. The shadowed area resembles the 4mm grating length, assisting visualization. Black and red color traces refer to forward and backward translation of the ferrofluid for investigating repeatability.
). In Fig. 3 a contour plot of the transmission spectral data is presented; while in Fig. 4 the summary of the spectral shifts and grating notch strength changes are appended for forward and backward translation operation.

The data of Fig. 3 show that once the ferrofluid starts to overlap with the grating length the spectral response of the periodic structure undergoes two fundamental changes: first, it shifts to slightly higher wavelengths and second, the extinction ratio of the grating reduces. The last effect is associated with two optical properties of the ferrofluid: its extreme optical absorption and its refractive index that is higher than silica, inducing leaky propagation when infiltrated into the fibre capillaries. In such interaction scheme, the grating length overlapping with the magnetic fluid exhibits reduced diffraction efficiency, depending upon the overlap of each guiding mode with the infiltrated capillary region.

This effect is more explicitly depicted from the data presented in Fig. 4, wherein the Bragg scattering corresponding to the 1st guiding mode, exhibits greater spectral shifts –compared to the 0th mode-, while almost vanishing in extinction ratio when is fully overlapping with the ferrofluid. The maximum wavelength shift for the 0th order mode is ≈0.1nm (Fig. 4a) and the corresponding extinction ratio in transmission is greater than 2.5dB (Fig. 4b); while the 1st mode is shifted more than 0.18nm (Fig. 4c) and its 2.5dB strength is completely erased (see Fig. 4d). Moreover, in the data of Fig. 4 the ferrofluidic actuator is tested for backward and forward operation, for investigating the effect of ferrofluid residue onto the capillaries walls and its effect on the spectra obtained. For the experimental conditions applied (namely, surface functionalisation conditions and translation speed of the ferrofluid, namely, ≈0.5mm/sec) the spectral hysterisys effect appears to be minimal. Spectral hysterisys effects for backward or forward operation of the MOF may be associated with imperfect surface functionalisation or with spatially confined clotting of the ferrofluid. The above experiments were repeated using the same MOF actuator several times, while leading to reproducible results. Nonetheless, we found that the lifetime of such device is dependent upon the stability of the infiltrated ferrofluid, which is usually of the order of few days.

The effect of the translation of the ferrofluid along the MOF Bragg grating length L for different guiding modes is directly dependent upon the scattering efficiency of each mode, and more specifically upon the effective grating length Leff of each scattered mode, where Leff=12LRatanh(R) and R the mode reflectivity. By assuming uniform inscription profile and no-chirping effects, the effective length of the Bragg grating for the 0th mode was estimated to be Leff 0th=1.39mm and for the 1st guiding mode notch Leff 1st=2.47mm.

By considering these two Leff values, the behaviour of the results presented in Fig. 3 and 4 becomes clearer. As the ferrofluid enters the grating region (positive points on Ox axis in Fig. 3) the 1st order mode is affected first, while the fundamental grating mode undergoes significant spectral changes at a later phase and to a lesser extent. The above grating design parameter, also defines the spatial sensitivity of the specific in fibre actuator with respect to the spectral changes obtained.

An interesting spectral effect was observed for specific operation conditions of the MOF- device. When the ferrofluid is not overlapping with the grating, while being positioned either to the left or right side of the grating (see Fig. 5a and d
Fig. 5 Spectral measurements in transmission and reflection for different positions of the ferrofluid with respect to the Bragg grating. (a) State A (d) State B.
), the spectral results obtained in transmission mode (Fig. 5b, e) from the actuator are identical irrespectively of light excitation direction, denoting bidirectional operation. Bidirectional operation is not observed in reflection mode (Fig. 5 c, f), where the reflection measured when the ferrofluid is placed on the side of light excitation and before the grating length (see Fig. 5 d at State B). In such a case, the reflection measured is practically vanished for the higher order mode and substantially reduced for the fundamental mode peak (see Fig. 5f). This is due to the fact that the injected light is subjected twice in the absorption of the ferrofluidic length, once when reaches the grating; and then when the light is reflected back by it. Moreover, by exploiting this propagation effect and by using Beer’s absorption law, for a known ferrofluid length, we have estimated the transmission loss for the fundamental mode due to the ferrofluid to be −4.0dB/cm, approximately.

The actuating operation of the ferrofluid infiltrated Bragg grating MOF was also tested using a stepper motor translation stage and light excitation using a tuneable laser emitting at the 1.5μm band. The laser was tuned at the center of each Bragg spectral notch, and its reflection and transmission was measured using a power-meter head. Power modulation results in transmission and reflection mode, are presented in Fig. 6
Fig. 6 Power modulation results for two cycles, in transmission and reflection obtained for the 1st guiding mode. Stepper motor speed 0.5mm/sec.
.

4. Conclusion

We have presented a microstructured optical fibre Bragg grating actuator utilizing an infiltrated ferrofluidic matrix into the fibre capillaries. Details were provided for the functionalisation of the capillaries of the MOF and the ferrofluid infiltration process. The results presented refer to the spectral changes induced for different overlaps of the ferrofluid with the grating length, using a static magnetic field. Wavelength shifts of the Bragg peaks of the order of 0.2nm and significant modulation of the grating strength were measured. The MOF device was examined with respect to its actuating operation for different light launching directions. We are currently investigating the possibility of exploiting this ferrofluidic infiltrated MOF in the development of magnetic field miniature probes; as well as, of shear-stress and magnetic valves sensing units of sub-millimetre spatial accuracy. We are working on the optimization of the fibre capillaries wettability using suitable silanisation methods and with respect to the ferrofluid carrier, for increasing the actuation speed of the device.

Acknowledgements

This work was partially supported by the EU Project SP4-Capacities “IASIS” contr. numb. 232479; and the Marie Curie Excellence Grant under the Contract No. MEXT-CT-2005-024854. AC would like to thank Dr. M.Berta for assistance with the PVP functionalisation.

References and links

1.

St. J. Philip, “Photonic-Crystal Fibers,” J. Lightwave Technol. 24(12), 4729–4749 (2006). [CrossRef]

2.

C. Monat, P. Domachuk, and B. J. Eggleton, “Integrated optofluidics: A new river of light,” Nat. Photonics 1(2), 106–114 (2007). [CrossRef]

3.

F. Benabid, F. Couny, J. C. Knight, T. A. Birks, and P. S. Russell, “Compact, stable and efficient all-fibre gas cells using hollow-core photonic crystal fibres,” Nature 434(7032), 488–491 (2005). [CrossRef] [PubMed]

4.

D. K. C. Wu, B. T. Kuhlmey, and B. J. Eggleton, “Ultrasensitive photonic crystal fiber refractive index sensor,” Opt. Lett. 34(3), 322–324 (2009). [CrossRef] [PubMed]

5.

T. Ritari, J. Tuominen, H. Ludvigsen, J. Petersen, T. Sørensen, T. Hansen, and H. Simonsen, “Gas sensing using air-guiding photonic bandgap fibers,” Opt. Express 12(17), 4080–4087 (2004), http://www.opticsinfobase.org/abstract.cfm?URI=oe-12-17-4080. [CrossRef] [PubMed]

6.

T. Larsen, A. Bjarklev, D. Hermann, and J. Broeng, “Optical devices based on liquid crystal photonic bandgap fibres,” Opt. Express 11(20), 2589–2596 (2003), http://www.opticsinfobase.org/oe/abstract.cfm?URI=oe-11-20-2589. [CrossRef] [PubMed]

7.

B. Eggleton, C. Kerbage, P. Westbrook, R. Windeler, and A. Hale, “Microstructured optical fiber devices,” Opt. Express 9(13), 698–713 (2001), http://www.opticsinfobase.org/oe/abstract.cfm?URI=oe-9-13-698. [CrossRef] [PubMed]

8.

A. Cusano, D. Paladino, and A. Iadicicco, “Microstructured Fibre Bragg Gratings,” J. Lightwave Technol. 27(11), 1663–1697 (2009). [CrossRef]

9.

Y. Wang, W. Jin, L. Jin, X. Tan, H. Bartelt, W. Ecke, K. Moerl, K. Schroeder, R. Spittel, R. Willsch, J. Kobelke, M. Rothhardt, L. Shan, and S. Brueckner, “Optical switch based on a fluid-filled photonic crystal fiber Bragg grating,” Opt. Lett. 34(23), 3683–3685 (2009). [CrossRef] [PubMed]

10.

L. Wei, J. Weirich, T. T. Alkeskjold, and A. Bjarklev, “On-chip tunable long-period grating devices based on liquid crystal photonic bandgap fibers,” Opt. Lett. 34(24), 3818–3820 (2009). [CrossRef] [PubMed]

11.

L. Rindorf and O. Bang, “Highly sensitive refractometer with a photonic-crystal-fiber long-period grating,” Opt. Lett. 33(6), 563–565 (2008). [CrossRef] [PubMed]

12.

O. Frazão, T. Martynkien, J. M. Baptista, J. L. Santos, W. Urbanczyk, and J. Wojcik, “Optical refractometer based on a birefringent Bragg grating written in an H-shaped fiber,” Opt. Lett. 34(1), 76–78 (2009). [CrossRef]

13.

R. E. Rosenweig, “Ferrohydrodynamics,” (Dover, New York 1997)

14.

C. Yamahata, M. Chastellain, V. K. Parashar, A. Petri, H. Hofmann, and M. A. M. Gijs, “Plastic micropump with ferrofluidic actuation,” J. Microelectromech. Syst. 14(1), 96–102 (2005). [CrossRef]

15.

H. E. Horng, J. J. Chieh, Y. H. Chao, and S. Y. Yang, “Designing optical-fibre modulators by using magnetic fluids,” Opt. Lett. 30, 543–545 (2005). [CrossRef] [PubMed]

16.

B. B. Yellen, G. Fridman, and G. Friedman, “Ferrofluid lithography,” Nanotechnology 15(10), S562–S565 (2004). [CrossRef]

17.

H. Labidi, J.-J. Guerin, V. Girardon, X. Bonnet, C. Simonneau, R. Boucenna, C. de Barros, N. Daley, and I. Riant, “Dynamic gain control of optical amplifier using an all-fibre solution” 28th European Conference on Optical Communication ECOC, PD1.8, page 1–2, Vol 5, Copenhagen, 8–12 Sept. 2002B.B.

18.

A. Candiani, M. Konstantaki, S. Pissadakis, “Magnetic Tuning of Optical Fibre Long Period Gratings,” CLEO-Europe 2009, CH4.2.

19.

D. Psaltis, S. R. Quake, and C. Yang, “Developing optofluidic technology through the fusion of microfluidics and optics,” Nature 442(7101), 381–386 (2006). [CrossRef] [PubMed]

20.

S. Pissadakis, M. Livitziis, and G. D. Tsibidis, “Investigations on the Bragg grating recording in all-silica, standard and microstructured optical fibres using 248 nm 5 ps, laser radiation,” J. Europ. Opt. Soc. Rap. Public. 4, 09049 (2009). [CrossRef]

21.

H. Schwerdt, “Application of ferrofluid as a valve/pump for polycarbonate microfluidic devices,” NSF summer thesis, Johns Hopkins University (2006) http://www.seas.upenn.edu/~sunfest/pastProjects/Papers06/Schwerdt.pdf

OCIS Codes
(060.2340) Fiber optics and optical communications : Fiber optics components
(060.2370) Fiber optics and optical communications : Fiber optics sensors
(230.3810) Optical devices : Magneto-optic systems
(060.3735) Fiber optics and optical communications : Fiber Bragg gratings
(060.4005) Fiber optics and optical communications : Microstructured fibers

ToC Category:
Fiber Optics and Optical Communications

History
Original Manuscript: September 13, 2010
Revised Manuscript: October 12, 2010
Manuscript Accepted: October 15, 2010
Published: November 10, 2010

Citation
A. Candiani, M. Konstantaki, W. Margulis, and S. Pissadakis, "A spectrally tunable microstructured optical fibre Bragg grating utilizing an infiltrated ferrofluid," Opt. Express 18, 24654-24660 (2010)
http://www.opticsinfobase.org/oe/abstract.cfm?URI=oe-18-24-24654


Sort:  Author  |  Year  |  Journal  |  Reset  

References

  1. St. J. Philip, “Photonic-Crystal Fibers,” J. Lightwave Technol. 24(12), 4729–4749 (2006). [CrossRef]
  2. C. Monat, P. Domachuk, and B. J. Eggleton, “Integrated optofluidics: A new river of light,” Nat. Photonics 1(2), 106–114 (2007). [CrossRef]
  3. F. Benabid, F. Couny, J. C. Knight, T. A. Birks, and P. S. Russell, “Compact, stable and efficient all-fibre gas cells using hollow-core photonic crystal fibres,” Nature 434(7032), 488–491 (2005). [CrossRef] [PubMed]
  4. D. K. C. Wu, B. T. Kuhlmey, and B. J. Eggleton, “Ultrasensitive photonic crystal fiber refractive index sensor,” Opt. Lett. 34(3), 322–324 (2009). [CrossRef] [PubMed]
  5. T. Ritari, J. Tuominen, H. Ludvigsen, J. Petersen, T. Sørensen, T. Hansen, and H. Simonsen, “Gas sensing using air-guiding photonic bandgap fibers,” Opt. Express 12(17), 4080–4087 (2004), http://www.opticsinfobase.org/abstract.cfm?URI=oe-12-17-4080 . [CrossRef] [PubMed]
  6. T. Larsen, A. Bjarklev, D. Hermann, and J. Broeng, “Optical devices based on liquid crystal photonic bandgap fibres,” Opt. Express 11(20), 2589–2596 (2003), http://www.opticsinfobase.org/oe/abstract.cfm?URI=oe-11-20-2589 . [CrossRef] [PubMed]
  7. B. Eggleton, C. Kerbage, P. Westbrook, R. Windeler, and A. Hale, “Microstructured optical fiber devices,” Opt. Express 9(13), 698–713 (2001), http://www.opticsinfobase.org/oe/abstract.cfm?URI=oe-9-13-698 . [CrossRef] [PubMed]
  8. A. Cusano, D. Paladino, and A. Iadicicco, “Microstructured Fibre Bragg Gratings,” J. Lightwave Technol. 27(11), 1663–1697 (2009). [CrossRef]
  9. Y. Wang, W. Jin, L. Jin, X. Tan, H. Bartelt, W. Ecke, K. Moerl, K. Schroeder, R. Spittel, R. Willsch, J. Kobelke, M. Rothhardt, L. Shan, and S. Brueckner, “Optical switch based on a fluid-filled photonic crystal fiber Bragg grating,” Opt. Lett. 34(23), 3683–3685 (2009). [CrossRef] [PubMed]
  10. L. Wei, J. Weirich, T. T. Alkeskjold, and A. Bjarklev, “On-chip tunable long-period grating devices based on liquid crystal photonic bandgap fibers,” Opt. Lett. 34(24), 3818–3820 (2009). [CrossRef] [PubMed]
  11. L. Rindorf and O. Bang, “Highly sensitive refractometer with a photonic-crystal-fiber long-period grating,” Opt. Lett. 33(6), 563–565 (2008). [CrossRef] [PubMed]
  12. O. Frazão, T. Martynkien, J. M. Baptista, J. L. Santos, W. Urbanczyk, and J. Wojcik, “Optical refractometer based on a birefringent Bragg grating written in an H-shaped fiber,” Opt. Lett. 34(1), 76–78 (2009). [CrossRef]
  13. R. E. Rosenweig, “Ferrohydrodynamics,” (Dover, New York 1997)
  14. C. Yamahata, M. Chastellain, V. K. Parashar, A. Petri, H. Hofmann, and M. A. M. Gijs, “Plastic micropump with ferrofluidic actuation,” J. Microelectromech. Syst. 14(1), 96–102 (2005). [CrossRef]
  15. H. E. Horng, J. J. Chieh, Y. H. Chao, and S. Y. Yang, “Designing optical-fibre modulators by using magnetic fluids,” Opt. Lett. 30, 543–545 (2005). [CrossRef] [PubMed]
  16. B. B. Yellen, G. Fridman, and G. Friedman, “Ferrofluid lithography,” Nanotechnology 15(10), S562–S565 (2004). [CrossRef]
  17. H. Labidi, J.-J. Guerin, V. Girardon, X. Bonnet, C. Simonneau, R. Boucenna, C. de Barros, N. Daley, and I. Riant, “Dynamic gain control of optical amplifier using an all-fibre solution” 28th European Conference on Optical Communication ECOC, PD1.8, page 1–2, Vol 5, Copenhagen, 8–12 Sept. 2002B.B.
  18. A. Candiani, M. Konstantaki, S. Pissadakis, “Magnetic Tuning of Optical Fibre Long Period Gratings,” CLEO-Europe 2009, CH4.2.
  19. D. Psaltis, S. R. Quake, and C. Yang, “Developing optofluidic technology through the fusion of microfluidics and optics,” Nature 442(7101), 381–386 (2006). [CrossRef] [PubMed]
  20. S. Pissadakis, M. Livitziis, and G. D. Tsibidis, “Investigations on the Bragg grating recording in all-silica, standard and microstructured optical fibres using 248 nm 5 ps, laser radiation,” J. Europ. Opt. Soc. Rap. Public. 4, 09049 (2009). [CrossRef]
  21. H. Schwerdt, “Application of ferrofluid as a valve/pump for polycarbonate microfluidic devices,” NSF summer thesis, Johns Hopkins University (2006) http://www.seas.upenn.edu/~sunfest/pastProjects/Papers06/Schwerdt.pdf

Cited By

Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.


« Previous Article  |  Next Article »

OSA is a member of CrossRef.

CrossCheck Deposited