OSA's Digital Library

Optics Express

Optics Express

  • Editor: C. Martijn de Sterke
  • Vol. 18, Iss. 6 — Mar. 15, 2010
  • pp: 6064–6070
« Show journal navigation

160-Gb/s all-optical phase-transparent wavelength conversion through cascaded SFG-DFG in a broadband linear-chirped PPLN waveguide

Guo-Wei Lu, Satoshi Shinada, Hideaki Furukawa, Naoya Wada, Tetsuya Miyazaki, and Hiromasa Ito  »View Author Affiliations


Optics Express, Vol. 18, Issue 6, pp. 6064-6070 (2010)
http://dx.doi.org/10.1364/OE.18.006064


View Full Text Article

Acrobat PDF (701 KB)





Browse Journals / Lookup Meetings

Browse by Journal and Year


   


Lookup Conference Papers

Close Browse Journals / Lookup Meetings

Article Tools

Share
Citations

Abstract

We experimentally demonstrated ultra-fast phase-transparent wavelength conversion using cascaded sum- and difference-frequency generation (cSFG-DFG) in linear-chirped periodically poled lithium niobate (PPLN). Error-free wavelength conversion of a 160-Gb/s return-to-zero differential phase-shift keying (RZ-DPSK) signal was successfully achieved. Thanks to the enhanced conversion bandwidth in the PPLN with linear-chirped periods, no optical equalizer was required to compensate the spectrum distortion after conversion, unlike a previous demonstration of 160-Gb/s RZ on-off keying (OOK) using fixed-period PPLN.

© 2010 OSA

1. Introduction

Advanced optical phase modulation formats, such as differential binary phase-shift keying (DPSK), differential quadrature phase-shift keying (DQPSK), and differential eight-ary phase-shift keying (D8PSK), have attracted considerable research attention as promising candidates for future optical communication systems. All-optical phase-transparent wavelength conversion will play an important role in supporting the transparency of phase-modulated formats in future transparent optical networks. Periodically poled lithium-niobate (PPLN) waveguides are becoming attractive devices for optical signal processing thanks to their compactness, ultrafast dynamics, and high efficiency [1

1. A. Bogoni, X. Wu, I. Fazal, and A. E. Willner, “Photonic processing of 320 Gbits/s based on sum-/difference-frequency generation and pump depletion in a single PPLN waveguide,” Opt. Lett. 34(12), 1825–1827 (2009). [CrossRef] [PubMed]

]. Ultra-fast wavelength conversion for intensity-modulated signals has been reported in [1

1. A. Bogoni, X. Wu, I. Fazal, and A. E. Willner, “Photonic processing of 320 Gbits/s based on sum-/difference-frequency generation and pump depletion in a single PPLN waveguide,” Opt. Lett. 34(12), 1825–1827 (2009). [CrossRef] [PubMed]

3

3. H. Furukawa, A. Nirmalathas, N. Wada, S. Shinada, H. Tsuboya, and T. Miyazaki, “All Optical Tunable Wavelength Conversion at > 160 Gb/s,” in Optical Fiber Communication Conference and Exposition and The National Fiber Optic Engineers Conference, OSA Technical Digest Series (CD) (Optical Society of America, 2007), paper OTuI1.

]. For phase-modulated signals, wavelength conversion of 320-Gb/s return-to-zero DQPSK signals has been experimentally demonstrated through cascaded second-harmonic generation and difference-frequency generation (cSHG-DFG) in PPLN [4

4. H. Hu, H. Suche, R. Ludwig, B. Huettl, C. Schmidt-Langhorst, R. Nouroozi, W. Sohler, and C. Schubert, “Polarization Insensitive All-Optical Wavelength Conversion of 320 Gb/s RZ-DQPSK Data Signals,” in Optical Fiber Communication Conference, OSA Technical Digest (CD) (Optical Society of America, 2009), paper OThS6.

,5

5. B. Huettl, A. Gual i Coca, H. Suche, R. Ludwig, C. Schmidt-Langhorst, H. G. Weber, W. Sohler, and C. Schubert, “320 Gbit/s DQPSK All-Optical Wavelength Conversion Using Periodically Poled LiNbO3,” in Conference on Lasers and Electro-Optics/Quantum Electronics and Laser Science Conference and Photonic Applications Systems Technologies, OSA Technical Digest Series (CD) (Optical Society of America, 2007), paper CThF1.

]. However, when using cSHG-DFG in PPLN, the wavelength of the converted signal cannot be flexibly changed. On the other hand, wavelength tunability of the converted signal can be easily achieved using cascaded sum- and difference-frequency generation (cSFG-DFG) [2

2. H. Furukawa, A. Nirmalathas, N. Wada, S. Shinada, H. Tsuboya, and T. Miyazaki, “Tunable All-Optical Wavelength Conversion of 160 Gbit/s RZ Optical Signals by Cascaded SFG-DFG Generation in PPLN Waveguide,” IEEE Photon. Technol. Lett. 19(6), 384–386 (2007). [CrossRef]

,3

3. H. Furukawa, A. Nirmalathas, N. Wada, S. Shinada, H. Tsuboya, and T. Miyazaki, “All Optical Tunable Wavelength Conversion at > 160 Gb/s,” in Optical Fiber Communication Conference and Exposition and The National Fiber Optic Engineers Conference, OSA Technical Digest Series (CD) (Optical Society of America, 2007), paper OTuI1.

] in PPLN. By simply changing the wavelength of one pump signal, the wavelength of the converted signal can be adjusted accordingly. In [2

2. H. Furukawa, A. Nirmalathas, N. Wada, S. Shinada, H. Tsuboya, and T. Miyazaki, “Tunable All-Optical Wavelength Conversion of 160 Gbit/s RZ Optical Signals by Cascaded SFG-DFG Generation in PPLN Waveguide,” IEEE Photon. Technol. Lett. 19(6), 384–386 (2007). [CrossRef]

], with fixed-period PPLN, to overcome the spectrum distortion caused by the limited conversion bandwidth, an optical spectrum shaper was required to compensate the distortion to achieve error-free ultrafast (>100 Gbit/s) wavelength conversion.

In the study described here, we experimentally demonstrated all-optical phase-preserved wavelength conversion at 160 Gbit/s through the cSFG-DFG interaction in a linear-chirped PPLN waveguide. The LiNbO3 in PPLN is linearly-chirped periodically poled crystal, which means that the crystal periods vary gradually. This could be an effective way to enhance the conversion bandwidth, and thus make it possible to achieve ultra-fast (>100 Gbit/s) wavelength conversion without deploying any optical equalizer. This is an advantage of linear-chirped PPLN over fixed-period PPLN when applying it to ultra-fast photonic processing for both phase- and intensity-modulated signals.

2. Operating principle

The operating principle of the wavelength conversion based on cascaded SFG-DFG is shown in Fig. 1
Fig. 1 Operating principle of cSFG-DFG process in PPLN for phase-transparent wavelength conversion.
. An optical input signal at λsignal and two amplified continuous wave (CW) pumps at λpump1 and λpump2 are combined and fed into a PPLN to participate in the cascaded SFG and DFG nonlinear interactions. To satisfy the quasi-phase matching (QPM) condition, the input signal (λsignal) and one of the pumps (P1 at λpump1) are symmetrically placed with respect to the QPM wavelength of the PPLN. Under the QPM condition, the input signal interacts with P1 to generate a sum-frequency component at λSFG via SFG. Meanwhile, the generated SFG component mixes with the other pump (P2) to generate a converted signal at λconverted through DFG. In the wavelength conversion based on the cSFG-DFG nonlinear interaction in PPLN, both intensity and phase information carried in the input signal and pumps is well-preserved and transferred to the converted signal [6

6. J. Wang, J. Sun, X. Zhang, D. Huang, and M. M. Fejer, “Ultrafast all-optical three-input Boolean XOR operation for differential phase-shift keying signals using periodically poled lithium niobate,” Opt. Lett. 33(13), 1419–1421 (2008). [CrossRef] [PubMed]

]. Therefore, it could be applied to phase-preserved wavelength conversion.

To achieve ultra-fast wavelength conversion (>100 Gbit/s), it is important for PPLN to have a wide QPM-bandwidth with uniform efficiencies to enable wide-band wavelength conversion. In [2

2. H. Furukawa, A. Nirmalathas, N. Wada, S. Shinada, H. Tsuboya, and T. Miyazaki, “Tunable All-Optical Wavelength Conversion of 160 Gbit/s RZ Optical Signals by Cascaded SFG-DFG Generation in PPLN Waveguide,” IEEE Photon. Technol. Lett. 19(6), 384–386 (2007). [CrossRef]

], PPLN with a fixed period was employed to demonstrate the wavelength conversion for on-off keying (OOK) signals at 160 Gbit/s. In that study, however, due to the limited conversion bandwidth and the non-uniform conversion efficiency across the conversion bandwidth, an optical spectrum shaper was deployed for optical equalization to achieve error free operation at 160-Gbit/s. In the present study, to enhance the conversion bandwidth in PPLN, a linear-chirped MgO-doped PPLN was fabricated using the proton-exchange technique. The periods of the domains varied across the nonlinear crystal so as to provide chirped phase matching of the light propagating in the crystal. The resulting chirped QPM widened the conversion bandwidth of the PPLN.

As demonstrated in [2

2. H. Furukawa, A. Nirmalathas, N. Wada, S. Shinada, H. Tsuboya, and T. Miyazaki, “Tunable All-Optical Wavelength Conversion of 160 Gbit/s RZ Optical Signals by Cascaded SFG-DFG Generation in PPLN Waveguide,” IEEE Photon. Technol. Lett. 19(6), 384–386 (2007). [CrossRef]

], by simply tuning the wavelength of one of the pumps (P2), wavelength tunability of the converted signal can be achieved. Moreover, the enhancement in conversion bandwidth in the linear-chirped PPLN could also give rise to a larger tunability.

3. Experiment and results

To demonstrate the phase transparency in the wavelength conversion based on the cSFG-DFG process in PPLN, phase-transparent wavelength conversion at 160-Gb/s bit rate was experimentally demonstrated. The experimental setup is illustrated in Fig. 3
Fig. 3 Experimental setup.
. To generate a 160-Gb/s RZ-DPSK signal, a pulse train with a repetition rate of 10 GHz and a pulse width of around 2 ps was generated from a semiconductor mode-locked laser diode (MLLD) at 1547 nm, and was then phase-modulated by an LN phase modulator to generate a 10-Gb/s RZ-DPSK signal. A 160-Gb/s RZ-DPSK signal was obtained after multiplexing through a four-stage PLC-based multiplexer. After individual power amplification, two CW beams at 1561 nm and 1572 nm, serving as pumps (P1 and P2), were combined with the 160-Gb/s RZ-DPSK signal and fed into the fabricated PPLN device through a fiber lens. The total fiber-to-fiber insertion loss was around 4 dB. The launched powers of P1, P2, and the input RZ-DPSK signal at the input of the PPLN were 22.2 dBm, 19.6 dBm, and 21.4 dBm, respectively. As shown in Fig. 4
Fig. 4 Optical spectrum after PPLN (resolution: 0.01nm).
, the converted signal was obtained at 1537 nm with a conversion efficiency of around –25 dB. A 6-nm bandpass filter was used to filter out the converted 160-Gb/s RZ-DPSK signal after the PPLN. The waveforms of the input 160-Gb/s RZ-DPSK signal and the converted RZ-DPSK signal before phase de-modulation are shown in Fig. 5
Fig. 5 Eye diagrams of the (a) input and (b) converted 160-Gb/s RZ-DPSK signals before phase de-modulation.
. The measured input pulsewidth was around 1.82 ps, while the converted pulse was slightly broadened with a pulsewidth of around 2.18 ps. A slight increase in amplitude jitter was observed after conversion. It was then de-multiplexed into a 10-Gb/s RZ-DPSK stream after a 160Gb/s-to-10Gb/s de-multiplexer, which was based on two cascaded electroabsorption modulators (EAMs). A Mach-Zehnder delay interferometer and balanced detector were employed for phase demodulation. Bit-error rates of the input and converted RZ-DPSK signals were measured at a bit rate of 10 Gb/s after de-multiplexing and phase demodulation.

As shown in Fig. 6
Fig. 6 The measured BER curves of the input and converted 160-Gb/s RZ-DPSK signals after de-multiplexing to 10-Gb/s data.
, for the input RZ-DPSK, a receiver sensitivity difference of less than 0.5 dB was obtained for 16 tributaries, whereas a sensitivity difference of around 1 dB was obtained among 16 tributaries for the converted RZ-DPSK signal. This indicates that uniform performance was observed for the de-multiplexed tributaries. Comparing with the input tributaries, a power penalty of around 3 dB was obtained for the converted signals, which could be mainly attributed to the additional noise introduced in power amplification as the OSNR of the converted signal was relative low after conversion. Further improvement in overall performance could be achieved through the optimization in PPLN design to balance conversion bandwidth and efficiency. The measured eye diagrams of the input and converted 160-Gbit/s RZ-DPSK signals after being de-multiplexed to 16 tributaries are shown in Figs. 7
Fig. 7 The measured eye diagrams of the demodulated input 160-Gbit/s RZ-DPSK signal after de-multiplexing to 16 tributaries.
and 8
Fig. 8 The measured eye diagrams of the demodulated converted 160-Gbit/s RZ-DPSK signal after de-multiplexing to 16 tributaries.
, respectively. Note that, in this work, no optical equalizer, such as a spectrum shaper, was employed in the experiment. This implies that the conversion bandwidth in the linear-chirped PPLN is broad and uniform enough to support wavelength conversion at 160 Gb/s.

4. Conclusion

To enhance the conversion bandwidth in wavelength conversion based on the cSFG-DFG process in PPLN, especially for applications at >100 Gb/s, linear-chirped PPLN was fabricated. Unlike the conventional fixed-period PPLN, no additional optical equalizer was required to achieve error-free operation at 160 Gb/s. Moreover, phase transparency was also successfully demonstrated by showing error-free operation of 160-Gb/s RZ-DPSK wavelength conversion with an average power penalty of around 3 dB.

References and links

1.

A. Bogoni, X. Wu, I. Fazal, and A. E. Willner, “Photonic processing of 320 Gbits/s based on sum-/difference-frequency generation and pump depletion in a single PPLN waveguide,” Opt. Lett. 34(12), 1825–1827 (2009). [CrossRef] [PubMed]

2.

H. Furukawa, A. Nirmalathas, N. Wada, S. Shinada, H. Tsuboya, and T. Miyazaki, “Tunable All-Optical Wavelength Conversion of 160 Gbit/s RZ Optical Signals by Cascaded SFG-DFG Generation in PPLN Waveguide,” IEEE Photon. Technol. Lett. 19(6), 384–386 (2007). [CrossRef]

3.

H. Furukawa, A. Nirmalathas, N. Wada, S. Shinada, H. Tsuboya, and T. Miyazaki, “All Optical Tunable Wavelength Conversion at > 160 Gb/s,” in Optical Fiber Communication Conference and Exposition and The National Fiber Optic Engineers Conference, OSA Technical Digest Series (CD) (Optical Society of America, 2007), paper OTuI1.

4.

H. Hu, H. Suche, R. Ludwig, B. Huettl, C. Schmidt-Langhorst, R. Nouroozi, W. Sohler, and C. Schubert, “Polarization Insensitive All-Optical Wavelength Conversion of 320 Gb/s RZ-DQPSK Data Signals,” in Optical Fiber Communication Conference, OSA Technical Digest (CD) (Optical Society of America, 2009), paper OThS6.

5.

B. Huettl, A. Gual i Coca, H. Suche, R. Ludwig, C. Schmidt-Langhorst, H. G. Weber, W. Sohler, and C. Schubert, “320 Gbit/s DQPSK All-Optical Wavelength Conversion Using Periodically Poled LiNbO3,” in Conference on Lasers and Electro-Optics/Quantum Electronics and Laser Science Conference and Photonic Applications Systems Technologies, OSA Technical Digest Series (CD) (Optical Society of America, 2007), paper CThF1.

6.

J. Wang, J. Sun, X. Zhang, D. Huang, and M. M. Fejer, “Ultrafast all-optical three-input Boolean XOR operation for differential phase-shift keying signals using periodically poled lithium niobate,” Opt. Lett. 33(13), 1419–1421 (2008). [CrossRef] [PubMed]

OCIS Codes
(060.2330) Fiber optics and optical communications : Fiber optics communications
(060.4510) Fiber optics and optical communications : Optical communications
(060.5060) Fiber optics and optical communications : Phase modulation
(130.3730) Integrated optics : Lithium niobate
(190.4390) Nonlinear optics : Nonlinear optics, integrated optics
(130.7405) Integrated optics : Wavelength conversion devices

ToC Category:
Fiber Optics and Optical Communications

History
Original Manuscript: December 9, 2009
Revised Manuscript: February 25, 2010
Manuscript Accepted: March 4, 2010
Published: March 11, 2010

Citation
Guo-Wei Lu, Satoshi Shinada, Hideaki Furukawa, Naoya Wada, Tetsuya Miyazaki, and Hiromasa Ito, "160-Gb/s all-optical phase-transparent wavelength conversion through cascaded SFG-DFG in a broadband linear-chirped PPLN waveguide," Opt. Express 18, 6064-6070 (2010)
http://www.opticsinfobase.org/oe/abstract.cfm?URI=oe-18-6-6064


Sort:  Author  |  Year  |  Journal  |  Reset  

References

  1. A. Bogoni, X. Wu, I. Fazal, and A. E. Willner, “Photonic processing of 320 Gbits/s based on sum-/difference-frequency generation and pump depletion in a single PPLN waveguide,” Opt. Lett. 34(12), 1825–1827 (2009). [CrossRef] [PubMed]
  2. H. Furukawa, A. Nirmalathas, N. Wada, S. Shinada, H. Tsuboya, and T. Miyazaki, “Tunable All-Optical Wavelength Conversion of 160 Gbit/s RZ Optical Signals by Cascaded SFG-DFG Generation in PPLN Waveguide,” IEEE Photon. Technol. Lett. 19(6), 384–386 (2007). [CrossRef]
  3. H. Furukawa, A. Nirmalathas, N. Wada, S. Shinada, H. Tsuboya, and T. Miyazaki, “All Optical Tunable Wavelength Conversion at > 160 Gb/s,” in Optical Fiber Communication Conference and Exposition and The National Fiber Optic Engineers Conference, OSA Technical Digest Series (CD) (Optical Society of America, 2007), paper OTuI1.
  4. H. Hu, H. Suche, R. Ludwig, B. Huettl, C. Schmidt-Langhorst, R. Nouroozi, W. Sohler, and C. Schubert, “Polarization Insensitive All-Optical Wavelength Conversion of 320 Gb/s RZ-DQPSK Data Signals,” in Optical Fiber Communication Conference, OSA Technical Digest (CD) (Optical Society of America, 2009), paper OThS6.
  5. B. Huettl, A. Gual i Coca, H. Suche, R. Ludwig, C. Schmidt-Langhorst, H. G. Weber, W. Sohler, and C. Schubert, “320 Gbit/s DQPSK All-Optical Wavelength Conversion Using Periodically Poled LiNbO3,” in Conference on Lasers and Electro-Optics/Quantum Electronics and Laser Science Conference and Photonic Applications Systems Technologies, OSA Technical Digest Series (CD) (Optical Society of America, 2007), paper CThF1.
  6. J. Wang, J. Sun, X. Zhang, D. Huang, and M. M. Fejer, “Ultrafast all-optical three-input Boolean XOR operation for differential phase-shift keying signals using periodically poled lithium niobate,” Opt. Lett. 33(13), 1419–1421 (2008). [CrossRef] [PubMed]

Cited By

Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.


« Previous Article  |  Next Article »

OSA is a member of CrossRef.

CrossCheck Deposited