OSA's Digital Library

Optics Express

Optics Express

  • Editor: C. Martijn de Sterke
  • Vol. 18, Iss. 8 — Apr. 12, 2010
  • pp: 8332–8337
« Show journal navigation

Impact of dispersion map design upon transmission performance of long-haul RZ-DPSK system using dispersion flattened fiber

Hidenori Taga and Wei-Hung Chung  »View Author Affiliations


Optics Express, Vol. 18, Issue 8, pp. 8332-8337 (2010)
http://dx.doi.org/10.1364/OE.18.008332


View Full Text Article

Acrobat PDF (819 KB)





Browse Journals / Lookup Meetings

Browse by Journal and Year


   


Lookup Conference Papers

Close Browse Journals / Lookup Meetings

Article Tools

Share
Citations

Abstract

This paper describes a theoretical study of the impact of dispersion map design upon the long-haul RZ-DPSK system using the dispersion flattened fiber. Numerical simulations are conducted to clarify the transmission performance of different dispersion map designs. As a result, number of dispersion blocks has a significant impact upon the transmission performance, and reduction of the number improves the nonlinear tolerance of the system.

© 2010 OSA

1. Introduction

For the IM-DD based long-haul system, the dispersion flattened fiber (DFF) is another important technology to improve the transmission performance, and it was already installed in the Pacific Ocean [8

8. B. Bakhshi, M. Manna, G. Mohs, D. I. Kovsh, R. L. Lynch, M. Vaa, E. A. Golovchenko, W. W. Patterson, W. T. Anderson, P. Corbett, S. Jiang, M. M. Sanders, H. Li, G. T. Harvey, A. Lucero, and S. M. Abbott, “First Dispersion-Flattened Transpacific Undersea System: From Design to Terabit/s Field Trial,” J. Lightwave Technol. 22, 233- (2004), http://www.opticsinfobase.org/JLT/abstract.cfm?URI=JLT-22-1-233.

]. The DFF is also effective to improve the transmission performance of the RZ-DPSK based system, and a comparison of the long-haul system using the NZDSF and the DFF with the blockless type dispersion map was reported [9

9. H. Taga, “A theoretical investigation of the long-haul RZ-DPSK system performance using DFF and NZDSF,” Opt. Express 17(8), 6032–6037 (2009), http://www.opticsinfobase.org/oe/abstract.cfm?URI=oe-17-8-6032. [CrossRef] [PubMed]

].

For the NZDSF based system, block type dispersion map is not optimum for the RZ-DPSK format and number of dispersion blocks changes the transmission performance significantly. This implies that the transmission performance of the DFF based system is also affected significantly by the number of dispersion blocks. Therefore, this paper focuses on this issue whether the block type dispersion map causes the performance degradation of the DFF based RZ-DPSK system. The impact of the dispersion map design upon the transmission performance of the long-haul RZ-DPSK system using the DFF is characterized through numerical simulations.

2. Simulation model and dispersion map design

Figure 1
Fig. 1 A schematic diagram of the simulation model.
shows a schematic diagram of the simulation model. There were 96 optical transmitters (TX) to generate the RZ-DPSK signals. The wavelength was ranged between 1540.5nm and 1559.5nm with 0.2nm channel separation. The PSK signal was assumed to be generated by a Mach-Zehnder modulator (MZM), and the waveform applied for the two arms of the MZM was a raised cosine with the non return-to-zero (NRZ) waveform. The RZ waveform was applied after the PSK modulation, and the waveform was also raised cosine. The duty ratio of the pulse was 50%. The bit rate and the pattern for the modulation were 10Gbit/s and 29 De Brujin sequence, respectively. The multiplexer (MUX) did not have any wavelength selective function, and the modulated pattern of each transmitter was randomized at the output of the MUX. Three different sets of the initial pattern at the output of the MUX were simulated, and the obtained results were averaged.

The transmission line comprised the DFF and EDFA repeaters. The DFF was composed of the super large area fiber (SLA) and the inverse dispersion fiber (IDF) [10]. Each DFF span had negative chromatic dispersion of −240ps/nm, and the cumulative negative dispersion was compensated by the SLA. Table 1

Table 1. Parameters of the transmission fiber

table-icon
View This Table
shows the parameters of these fibers. The span length of the DFF was 100km, while that of the SLA only span was 108km. The total transmission distance was 6048km. The output power of the EDFA repeater was varied between + 13dBm and + 18dBm by 1dB step, and the noise figure of the repeater was set to 4.5dB. The wavelength dependent gain of the repeater was ignored in this simulation.

Six different dispersion maps were used for the simulation. Number of dispersion blocks was changed for each map. Map 1 had one dispersion block, Map 2 had two dispersion blocks, and so on. Map 1, 2, 3, and 6 had uniform dispersion blocks while Map 4 and 5 had two different block lengths within the system. Figure 2
Fig. 2 Dispersion maps of the simulated system
shows the dispersion maps used for this study. Note that the difference was only the position of SLA only span, and the physical parameters of the fibers were identical.

The optical demultiplexer (DEMUX) had the third order Gaussian shape. The bandwidth of the DEMUX was 0.1nm. As the system was using the DFF, there was no cumulative chromatic dispersion after the transmission for all the channels. Therefore, no pre or post dispersion compensation was adopted for the simulation. For the signal demodulation, difference of the optical phase was directly calculated from the optical field, and the performance was evaluated by the Q-factor obtained from the rails of 0 phase and π phase [11

11. X. Wei, X. Liu, and C. Xu, “Numerical simulation of the SPM penalty in a 10-Gb/s RZ-DPSK system,” IEEE Photon. Technol. Lett. 15(11), 1636–1638 (2003), http://ieeexplore.ieee.org/stamp/stamp.jsp?arnumber=1237613&isnumber=27767. [CrossRef]

].

3. Results and discussion

Figure 3
Fig. 3 Simulated 96-channels transmission performance as a function of repeater output power.
shows the performance of 96 channels after 6048km transmission as a function of the repeater output power. As seen in the figure, for small repeater output power of below + 14dBm, there is not any significant difference between the maps, but the performance of map 6 becomes inferior than the others when the repeater output power is increased above + 16dBm. These results clearly indicate that the nonlinear penalty of the system strongly depends on the dispersion map design.

Figure 4
Fig. 4 Averaged Q-factor as a function of the repeater output power.
shows the average Q-factor of 96 channels as a function of the repeater output power and the dispersion map. It is obvious that increasing the number of dispersion blocks leads to performance degradation in higher repeater output power (i.e., higher nonlinear regime). Regarding dispersion map design, the tendency is the same as the NZDSF based system [7

7. H. Taga, S.-S. Shu, J.-Y. Wu, and W.-T. Shih, “A theoretical study of the effect of zero-crossing points within the dispersion map upon a longhaul RZ-DPSK system,” Opt. Express 16(9), 6163–6169 (2008), http://www.opticsinfobase.org/oe/abstract.cfm?URI=oe-16-9-6163. [CrossRef] [PubMed]

], and it is favorable for the DFF system to reduce number of dispersion blocks to improve the performance.

One might suggest that the major reason of the performance difference is not the number of dispersion blocks but the maximum cumulative dispersion, because the maximum was around 7000ps/nm for Map 1 and 2200ps/nm for Map 6 as shown in Fig. 2. Then, the effect of the maximum cumulative dispersion was studied. As it was impossible to increase the maximum cumulative dispersion of Map 6 while maintaining fiber parameters, span configuration, and number of dispersion blocks, the chromatic dispersion parameter was adjusted to increase the maximum cumulative dispersion. Figure 5
Fig. 5 Modified dispersion map.
shows modified Map 6. The chromatic dispersion parameters of the SLA and IDF were tripled to be + 60ps/nm/km and −132ps/nm/km, respectively. The other parameters were maintained. Figure 6
Fig. 6 Averaged Q-factor of modified map as a function of the repeater output power.
shows the simulated results of modified Map 6. As seen in Fig. 6, the modified map showed comparable performance as Map 1. In addition, there was no significant channel dependency, and the performance of individual channels was similar to those shown in Fig. 3. This result implies that larger maximum cumulative dispersion improves the performance. On the other hand, comparing Map 4 and Map 5, even though the maximum cumulative dispersion is the same, Map4 showed better performance than Map 5 as seen in Fig. 4. This shows that number of dispersion blocks tends to have more significant impact than the maximum cumulative dispersion. As the fiber parameters used for Figs. 5 and 6 were not realistic, further studies are required to clarify the impact of the maximum cumulative dispersion.

4. Conclusions

The transmission performances of the long-haul RZ-DPSK system using the DFF was characterized theoretically. It was revealed that the dispersion map design was crucial for the system especially higher repeater output power regime. It was effective to reduce number of dispersion blocks to improve the system performance, and this tendency was the same as the case of the NZDSF based system [7

7. H. Taga, S.-S. Shu, J.-Y. Wu, and W.-T. Shih, “A theoretical study of the effect of zero-crossing points within the dispersion map upon a longhaul RZ-DPSK system,” Opt. Express 16(9), 6163–6169 (2008), http://www.opticsinfobase.org/oe/abstract.cfm?URI=oe-16-9-6163. [CrossRef] [PubMed]

].

Acknowledgments

This work is supported partially by National Science Council 96-2221-E-110-049-MY3, partially by key module technologies for ultra-broad bandwidth optical fiber communication project of Ministry of Economy, Taiwan, R.O.C., and partially by Aim for the Top University Plan of the National Sun Yat-Sen University and Ministry of Education, Taiwan, R.O.C.

References and links

1.

T. Inoue, K. Ishida, T. Tokura, E. Shibano, H. Taga, K. Shimizu, K. Goto, and K. Motoshima, “150km repeater span transmission experiment over 9,000klm,” in European Conference of Optical Communication (ECOC), Stockholm, Sweden, 2004, paper Th4.1.3.

2.

J.-X. Cai, M. Nissov, W. Anderson, M. Vaa, C. R. Davidson, D. G. Foursa, L. Liu, Y. Cai, A. J. Lucero, W. W. Patterson, P. C. Corbett, A. N. Pilipetskii, and N. S. Bergano, “Long-haul 40 Gb/s RZ-DPSK transmission with long repeater spacing,” in Optical Fiber Communication Conference, Technical Digest (CD) (Optical Society of America, 2006), paper OFD3, http://www.opticsinfobase.org/abstract.cfm?URI=OFC-2006-OFD3.

3.

C. Rasmussen, T. Fjelde, J. Bennike, F. Liu, S. Dey, B. Mikkelsen, P. Mamyshev, P. Serbe, P. vanderWagt, Y. Akasaka, D. Harris, D. Gapontsev, V. Ivshin, and P. Reeves-Hall, “DWDM 40G Transmission Over Trans-Pacific Distance (10 000 km) Using CSRZ-DPSK, Enhanced FEC, and All-Raman-Amplified 100-km UltraWave Fiber Spans,” J. Lightwave Technol. 22(1), 203–207 (2004), http://www.opticsinfobase.org/JLT/abstract.cfm?URI=JLT-22-1-203. [CrossRef]

4.

N. S. Bergano, “Wavelength division multiplexing in long-haul transoceanic transmission systems,” J. Lightwave Technol. 23(12), 4125–4139 (2005), http://www.opticsinfobase.org/JLT/abstract.cfm?URI=JLT-23-12-41. [CrossRef]

5.

G. Mohs, W. T. Anderson, and E. A. Golovchenko, “A New Dispersion Map for Undersea Optical Communication Systems,” in Optical Fiber Communication Conference and Exposition and The National Fiber Optic Engineers Conference, OSA Technical Digest Series (CD) (Optical Society of America, 2007), paper JThA41, http://www.opticsinfobase.org/abstract.cfm?URI=OFC-2007-JThA41.

6.

S. Dupont, P. Marmier, L. d. Mouza, G. Charlet, and V. Letellier, “70 x 10 Gbps (mixed RZ-OOK and RZDPSK) upgrade of a 7224km conventional 32 x 10 Gbps designed system,” in European Conference of Optical Communication (ECOC), Berlin, Germany, 2007, Paper 2.3.5.

7.

H. Taga, S.-S. Shu, J.-Y. Wu, and W.-T. Shih, “A theoretical study of the effect of zero-crossing points within the dispersion map upon a longhaul RZ-DPSK system,” Opt. Express 16(9), 6163–6169 (2008), http://www.opticsinfobase.org/oe/abstract.cfm?URI=oe-16-9-6163. [CrossRef] [PubMed]

8.

B. Bakhshi, M. Manna, G. Mohs, D. I. Kovsh, R. L. Lynch, M. Vaa, E. A. Golovchenko, W. W. Patterson, W. T. Anderson, P. Corbett, S. Jiang, M. M. Sanders, H. Li, G. T. Harvey, A. Lucero, and S. M. Abbott, “First Dispersion-Flattened Transpacific Undersea System: From Design to Terabit/s Field Trial,” J. Lightwave Technol. 22, 233- (2004), http://www.opticsinfobase.org/JLT/abstract.cfm?URI=JLT-22-1-233.

9.

H. Taga, “A theoretical investigation of the long-haul RZ-DPSK system performance using DFF and NZDSF,” Opt. Express 17(8), 6032–6037 (2009), http://www.opticsinfobase.org/oe/abstract.cfm?URI=oe-17-8-6032. [CrossRef] [PubMed]

10.

http://www.ofsoptics.com/resources/UWOceanFiber-fiber-115.pdf.

11.

X. Wei, X. Liu, and C. Xu, “Numerical simulation of the SPM penalty in a 10-Gb/s RZ-DPSK system,” IEEE Photon. Technol. Lett. 15(11), 1636–1638 (2003), http://ieeexplore.ieee.org/stamp/stamp.jsp?arnumber=1237613&isnumber=27767. [CrossRef]

OCIS Codes
(060.2330) Fiber optics and optical communications : Fiber optics communications
(060.4510) Fiber optics and optical communications : Optical communications

ToC Category:
Medical Optics and Biotechnology

History
Original Manuscript: January 14, 2010
Revised Manuscript: March 16, 2010
Manuscript Accepted: April 1, 2010
Published: April 6, 2010

Citation
Hidenori Taga and Wei-Hung Chung, "Impact of dispersion map design upon transmission performance of long-haul RZ-DPSK system using dispersion flattened fiber," Opt. Express 18, 8332-8337 (2010)
http://www.opticsinfobase.org/oe/abstract.cfm?URI=oe-18-8-8332


Sort:  Author  |  Year  |  Journal  |  Reset  

References

  1. T. Inoue, K. Ishida, T. Tokura, E. Shibano, H. Taga, K. Shimizu, K. Goto, and K. Motoshima, “150km repeater span transmission experiment over 9,000klm,” in European Conference of Optical Communication (ECOC), Stockholm, Sweden, 2004, paper Th4.1.3.
  2. J.-X. Cai, M. Nissov, W. Anderson, M. Vaa, C. R. Davidson, D. G. Foursa, L. Liu, Y. Cai, A. J. Lucero, W. W. Patterson, P. C. Corbett, A. N. Pilipetskii, and N. S. Bergano, “Long-haul 40 Gb/s RZ-DPSK transmission with long repeater spacing,” in Optical Fiber Communication Conference, Technical Digest (CD) (Optical Society of America, 2006), paper OFD3, http://www.opticsinfobase.org/abstract.cfm?URI=OFC-2006-OFD3 .
  3. C. Rasmussen, T. Fjelde, J. Bennike, F. Liu, S. Dey, B. Mikkelsen, P. Mamyshev, P. Serbe, P. vanderWagt, Y. Akasaka, D. Harris, D. Gapontsev, V. Ivshin, and P. Reeves-Hall, “DWDM 40G Transmission Over Trans-Pacific Distance (10 000 km) Using CSRZ-DPSK, Enhanced FEC, and All-Raman-Amplified 100-km UltraWave Fiber Spans,” J. Lightwave Technol. 22(1), 203–207 (2004), http://www.opticsinfobase.org/JLT/abstract.cfm?URI=JLT-22-1-203 . [CrossRef]
  4. N. S. Bergano, “Wavelength division multiplexing in long-haul transoceanic transmission systems,” J. Lightwave Technol. 23(12), 4125–4139 (2005), http://www.opticsinfobase.org/JLT/abstract.cfm?URI=JLT-23-12-41 . [CrossRef]
  5. G. Mohs, W. T. Anderson, and E. A. Golovchenko, “A New Dispersion Map for Undersea Optical Communication Systems,” in Optical Fiber Communication Conference and Exposition and The National Fiber Optic Engineers Conference, OSA Technical Digest Series (CD) (Optical Society of America, 2007), paper JThA41, http://www.opticsinfobase.org/abstract.cfm?URI=OFC-2007-JThA41 .
  6. S. Dupont, P. Marmier, L. d. Mouza, G. Charlet, and V. Letellier, “70 x 10 Gbps (mixed RZ-OOK and RZDPSK) upgrade of a 7224km conventional 32 x 10 Gbps designed system,” in European Conference of Optical Communication (ECOC), Berlin, Germany, 2007, Paper 2.3.5.
  7. H. Taga, S.-S. Shu, J.-Y. Wu, and W.-T. Shih, “A theoretical study of the effect of zero-crossing points within the dispersion map upon a longhaul RZ-DPSK system,” Opt. Express 16(9), 6163–6169 (2008), http://www.opticsinfobase.org/oe/abstract.cfm?URI=oe-16-9-6163 . [CrossRef] [PubMed]
  8. B. Bakhshi, M. Manna, G. Mohs, D. I. Kovsh, R. L. Lynch, M. Vaa, E. A. Golovchenko, W. W. Patterson, W. T. Anderson, P. Corbett, S. Jiang, M. M. Sanders, H. Li, G. T. Harvey, A. Lucero, and S. M. Abbott, “First Dispersion-Flattened Transpacific Undersea System: From Design to Terabit/s Field Trial,” J. Lightwave Technol. 22, 233- (2004), http://www.opticsinfobase.org/JLT/abstract.cfm?URI=JLT-22-1-233 .
  9. H. Taga, “A theoretical investigation of the long-haul RZ-DPSK system performance using DFF and NZDSF,” Opt. Express 17(8), 6032–6037 (2009), http://www.opticsinfobase.org/oe/abstract.cfm?URI=oe-17-8-6032 . [CrossRef] [PubMed]
  10. http://www.ofsoptics.com/resources/UWOceanFiber-fiber-115.pdf .
  11. X. Wei, X. Liu, and C. Xu, “Numerical simulation of the SPM penalty in a 10-Gb/s RZ-DPSK system,” IEEE Photon. Technol. Lett. 15(11), 1636–1638 (2003), http://ieeexplore.ieee.org/stamp/stamp.jsp?arnumber=1237613&isnumber=27767 . [CrossRef]

Cited By

Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.


« Previous Article  |  Next Article »

OSA is a member of CrossRef.

CrossCheck Deposited