OSA's Digital Library

Optics Express

Optics Express

  • Editor: C. Martijn de Sterke
  • Vol. 19, Iss. 1 — Jan. 3, 2011
  • pp: 283–288

Optics InfoBase > Optics Express > Volume 19 > Issue 1 > Page 283

« Show journal navigation

Multistability at arbitrary low optical intensities in a metal-dielectric layered structure

A. Ciattoni, C. Rizza, and E. Palange  »View Author Affiliations


Optics Express, Vol. 19, Issue 1, pp. 283-288 (2011)
http://dx.doi.org/10.1364/OE.19.000283


View Full Text Article

Acrobat PDF (855 KB)


Advanced Search

Browse Journals / Lookup Meetings

Browse by Journal and Year


   


Lookup Conference Papers

Close Browse Journals / Lookup Meetings

Article Tools

Share
Citations

Abstract

We show that a nonlinear metal-dielectric layered slab of subwavelength thickness and very small average dielectric permittivity displays optical multistable behavior at arbitrary low optical intensities. This is due to the fact that, in the presence of the small linear permittivity, one of the multiple electromagnetic slab states exists no matter how small is the transmitted optical intensity. We prove that multiple states at ultra-low optical intensities can be reached only by simultaneously operating on the incident optical intensity and incidence angle. By performing full wave simulations, we prove that the predicted phenomenology is feasible and very robust.

© 2011 Optical Society of America

1. Introduction

Hysteresis is probably one of the most intriguing feature a nonlinear system can exhibit both theoretically and for its main application, i.e. designing of memory devices. In optics, bistability and related hysteresis have attracted a large research interest in the last decades [1

A. Szoke, V. Daneu, J. Goldhar, and N. A. Kurnit, “Bistable optical element and its applications,” Appl. Phys. Lett. 15, 376 (1969). [CrossRef]

] since they are the basic ingredients for devising optical memories, logic gates and optical computing devices [2

E. Abraham and S. D. Smith, “Optical bistability and related devices,” Rep. Prog. Phys. 45, 815 (1982). [CrossRef]

]. However, the actual exploitation of the hysteresis behavior has been hampered by the fact that the electromagnetic bistable phenomenology generally occurs at high optical intensities. The research effort aimed at reducing the bistability threshold is considerable and almost all considered strategies rely on the enhancement of nonlinear effects [3

J. E. Sipe and R. W. Boyd, “Nonlinear susceptibility of composite optical materials in the Maxwell Garnett model,” Phys. Rev. A 46, 1614 (1992). [CrossRef] [PubMed]

]. Metal-dielectric multilayer structures have been shown to host considerable nonlinearity enhancement [4

N. N. Lepeshkin, A. Schweinsberg, G. Piredda, R. S. Bennink, and R. W. Boyd, “Enhanced nonlinear optical response of one-dimensional metal-dielectric photonic crystals,” Phys. Rev. Lett 93, 123902 (2004). [CrossRef] [PubMed]

] and this has lead to the prediction of bistability [5

A. Husakou and J. Herrmann, “Steplike transmission of light through a metal-dielectric multilayer structure due to an intensity-dependent sign of the effective dielectric constant,” Phys. Rev. Lett. 99, 127402 (2007). [CrossRef] [PubMed]

] characterized by a low intensity threshold [6

J. Chen, P. Wang, X. Wang, Y. Lu, and R. Zheng, “Optical bistability enhanced by highly localized bulk plasmon polariton modes in subwavelength metal-nonlinear dielectric multilayer structure,” App. Phys. Lett. 94, 081117 (2009). [CrossRef]

]. Optical bistability at relatively low optical intensities has also been predicted in the presence of surface plasmon polaritons [7

R. K. Hickernell and D. Sarid, “Optical bistability using prism-coupled, long-range surface plasmons,” J. Opt. Soc. Am. B 3, 1059 (1986). [CrossRef]

] where the low bistability threshold is due to the strong plasmon field enhancement which in turn produces an efficient enhancement of the nonlinear effects. Following a very different route, it has recently been proposed that an extremely marked nonlinear behavior can be observed, instead of by enhancing the nonlinear response, by substantially reducing the medium linear dielectric permittivity [8

A. Ciattoni, C. Rizza, and E. Palange, “Extreme nonlinear electrodynamics in metamaterials with very small linear dielectric permittivity,” Phys. Rev. A 81, 043839 (2010). [CrossRef]

] and this strategy has allowed to predict low-intensity transmissivity directional hysteresis exhibited by nonlinear metamaterial slabs with very small linear permittivity [9

A. Ciattoni, C. Rizza, and E. Palange, “Transmissivity directional hysteresis of a nonlinear metamaterial slab with very small linear permittivity,” Opt. Lett. 35, 2130 (2010). [CrossRef] [PubMed]

].

In this paper, we show that a nonlinear metal-dielectric layered slab of subwavelength thickness and very small average dielectric permittivity is characterized by a multistable behavior which is accessible at arbitrary low optical intensities. More precisely, we prove that the slab transmissivity, in addition to the angular multistable behavior occurring at low (but not arbitrary small) optical intensities (as discussed in Ref. [9

A. Ciattoni, C. Rizza, and E. Palange, “Transmissivity directional hysteresis of a nonlinear metamaterial slab with very small linear permittivity,” Opt. Lett. 35, 2130 (2010). [CrossRef] [PubMed]

]), is a multi-valued function of the incident optical intensity at each fixed incidence angle. The nonlinear electromagnetic matching at the output free-space slab interface combined with the small linear permittivity produces the multiplicity of electromagnetic states, one of which has a large electric field component normal to the slab even if the free-space transmitted intensity approaches zero. As a consequence, the lowest intensity at which transmissivity is multi-valued turns out to vanish for normal incidence and this implies that, at a very small incidence angle, multistability occurs at ultra-low optical intensities. The overall slab transmissivity turns out to be a rather articulated multi-valued function of both incident optical intensity and incidence angle and we show that ultra-low intensity multistable states can be reached only by simultaneously varying the incident optical intensity and incidence angle along suitable paths. We perform full wave simulations to investigate both the nontrivial metamaterial homogenization in the strong nonlinear regime and the role played by plasmonic resonances. We show that the induced plasmon polaritons excited at the metal-dielectric interfaces affect the numerical value of the slab transmissivity solely in proximity of the hysteresis jumps without altering the overall hysteresis behavior which is therefore proven to be a feasible and robust phenomenology.

2. Optical multistability at a fixed incidence angle

Consider the metal-dielectric layered slab reported in Fig. 1, embedded in vacuum, of thickness L = 258 nm and consisting of alternating, along the y-axis, two isotropic and non-magnetic nonlinear Kerr layers of thicknesses d1 and d2. We choose to operate with a monochromatic radiation of wavelength λ = 810 nm and, if the layers thicknesses are such that d1 + d2 ≪ λ, the slab behaves as an homogeneous anisotropic uniaxial medium (whose optical axis lies along the y-direction). In the presence of a transverse magnetic field (TM) E = Ex(x, z)êx + Ez(x, z)êz, H = Hy(x, z)êy (orthogonally propagating to the y–axis, as reported in Fig. 1), the effective medium behaves as an homogeneous isotropic nonlinear medium characterized by the standard Kerr constitutive relations D =  ɛ0 { ɛE+χ [ ( E  ·  E*) E +  12 ( E  · E)  E*]} (see Ref. [8

A. Ciattoni, C. Rizza, and E. Palange, “Extreme nonlinear electrodynamics in metamaterials with very small linear dielectric permittivity,” Phys. Rev. A 81, 043839 (2010). [CrossRef]

] for details). The effective dielectric permittivity ɛ and nonlinear susceptibility χ are the average values of their underlying constituents and we choose here ɛ = −0.054 and χ = 8.72 × 10−17 m2/V2 (see below for the actual feasibility of these values). Note that the negative and very small value of the effective dielectric permittivity is achieved here by averaging the negative and positive permittivities characterizing metal and dielectric layers, respectively. As reported in Fig. 1, a TM plane wave of amplitude Ei is made to impinge onto the slab interface at z = 0 with incidence angle θ thus producing a TM reflected plane wave of amplitude Er and a transmitted TM plane wave of amplitude Et. We have numerically evaluated the slab transmissivity T = |Et/Ei|2 for a number of incident optical intensities and incidence angles and in Fig. 2 we report T as a function of the input intensity I in = ( 1/2) ɛ0/ μ0 | Ei|2 for the incidence angles θ = 0.028 rad (panel (a)) and θ = 0.170 rad (panel (b)). The reported slab transmissivities are multi-valued functions of the incident optical intensity. The multiplicity (at last three-fold) of different slab electromagnetic states, corresponding to the same transmissivity, physically arises (as discussed in Ref. [9

A. Ciattoni, C. Rizza, and E. Palange, “Transmissivity directional hysteresis of a nonlinear metamaterial slab with very small linear permittivity,” Opt. Lett. 35, 2130 (2010). [CrossRef] [PubMed]

]) from the impact of the nonlinearity on the electromagnetic matching condition at the slab interfaces, an effect made possible by the very small value of |ɛ|. Specifically, the continuity, at z = L, of the displacement field component normal to the output slab interface, Dz(L−) = Dz(L+), yields [ ɛ+ 32χ ( | Et|2  cos2 θ+ Az2)]  Az + | Et| sin θ =0, which is a cubic equation that, for a given Et and θ yields at last three different values of the real amplitude Az = (Et/|Et|) exp(−2icosθ)Ez(L) characterizing the longitudinal electric field component at z = L. In Fig. 2(c) we report the surface comprising all the possible values of |χ|1/2Az together with values of |χ|1/2 Az (solid lines) corresponding to the transmissivities of Fig. 2(a) and 2(b), the capital letters labelling some reference states. Note that the incident intensities at which multistability occurs (of the order of 0.15 MW/cm2 and 4 MW/cm2 for the transmissivities of Fig. 2(a) and 2(b), respectively) are smaller than those normally required for observing standard optical bistability. However it is evident that the smaller |ɛ| the smaller the intensity threshold required for observing the considered multistability so that very smaller intensity thresholds (of the order of W/cm2) are very likely to be attained.

Fig. 1 Geometry of the layered metal-dielectric slab and of the TM incident (i), reflected (r) and transmitted (t) plane waves.
Fig. 2 Nonlinear slab transmissivity T (solid line) as a function of the normalized input field intensity Iin at the fixed incident angles θ = 0.028 rad (panel (a)) and θ = 0.170 rad (panel (b)). (c) Surface |χ|1/2Az and values of |χ|1/2Az (solid lines) corresponding to the transmissivities of panels (a) and (b). In the three panels, capital letters label some reference states. (d) Slab transmissivity T as a function of both the incident optical intensity Iin and incidence angle θ. Dashed lines represent the slab transmissivity of panels (a) and (b) and capital letters label the same reference states as in panels (a) and (b). In the inset the plane of independent parameters Iin and θ is reported together with the region at which slab multistability occurs (shaded region).

3. Slab multistably at arbitrary low optical intensities

Multistable transmissivities of Fig. 2(a) and 2(b) show two main mutual differences which deserve to be discussed. First, multi-valued transmissivity of Fig. 2(a) has, for Iin > IN, three different branches that does not break whereas multi-valued transmissivity of Fig. 2(b) has, for Iin > IE, an upper branch that does not break and two lower branches characterized by the two breaking states B and H. The origin of this difference is easily understood by considering the surface of Fig. 2(c) from which it is evident that the breaking of a transmissivity branch occurs for states close to critical points at which surface folding takes place (states B and H of Fig. 2(c)). Second, even though in both cases there exists a lower intensity above which the transmissivity is multi-valued (see the state N and E of Fig. 2(a) and 2(b), respectively), transmissivities of Fig. 2(a) and 2(b) are multistable for Iin > IN = 0.04 MW/cm2 and Iin > IE = 1.92 MW/cm2, respectively so that IN ≪ IE or, in other words the smaller the incidence angle the smaller the incident optical intensity at which multistable states are accessible. In order to closer investigate this remarkable point we have plotted in Fig. 2(d) the slab transmissivity as a function of both the incident optical intensity and incidence angle thus providing a complete description of the slab multistability. The transmissivity of Fig. 2(d) is a multi-sheet surface along which we have also plotted, for clarity purposes, the transmissivities of Fig. 2(a) and 2(b) (dashed lines) together with the very same reference states labelled with capital letters. The intersection between the upper and intermediate sheets yields the lower intensity at which multistability occurs and it turns out that such intensity is a monothonically increasing function of incidence angle θ and, most importantly, that this intensity vanishes if the angle vanishes. To underline this result, in the inset of Fig. 2(d) we have reported the region of the independent external parameter plane (Iin,θ) where multistability occurs (shaded region) and, since this region contains the excitation state Iin = 0 θ = 0, it is evident that multistable electromagnetic slab states are available at arbitrary small incident optical intensities (and very small incidence angles). In order to physically grasp the origin of such an unusual situation, consider the states providing multistability and belonging to the lower sheet of the surface reported in Fig. 2(c). For |Et| = 0 we have Az = 0 and Az =  ±  −2ɛ/ ( 3χ)=± 0.19/ χ (see the above mentioned matching condition at z = L) [10

It is worth noting that, in the considered situation, the longitudinal component Az is not due to surface waves (which here are not excited) since, as explained in Sec. 2, the strong values of Az belonging to the lower sheet of the surface in Fig. 2(c) arises from the impact of the nonlinearity on the boundary matching conditions at z = 0 and z = L.

] so that the surface exists even at arbitrary small values of |Et| (see Fig. 2(c)) and multistable states exist even in the limiting case where there is no transmitted waves. From Fig. 2(d) it is evident that the described mechanism provides multistable states even at ultra-low input optical intensities. The transmissivity reported in Fig. 2(b) clearly shows hysteresis behavior since the state B is a breaking point of its transmissivity branch. Suppose to switch on the incident plane wave with θ = 0.17 rad and Iin = IA = 0.035MW/cm2 so that the state A of Fig. 2(b), 2(c) and Fig. 2(d) is excited since before the illumination the slab was not polarized. By increasing the input intensity and holding the incidence angle fixed, the transmissivity follows the curve joining the point A and B of Fig. 2(b) while the electromagnetic state continuously varies as in Fig. 2(c). From the state B, if the intensity is further increased, it is evident that the electromagnetic state undergoes a sudden jump to the state C (see Fig. 2(c)) on the lower surface sheet since there is no allowed state continuously joined to B. As a consequence, the transmissivity undergoes a sudden jump to a higher value (see Fig. 2(b)). If now, starting from the state C, the input intensity is decreased, the electromagnetic state varies along the curve from C to D of Fig. 2(c) whereas the transmissivity in Fig. 2(b) assumes the values along the curve from C to D which are different from those attained along the forward path (hysteresis). At the state D, if the intensity is further decreased, the state undergoes a jump to the state E of Fig. 2(c), belonging to the central surface sheet, since the states from D to F of Fig. 2(c) have, according to Fig. 2(b), higher input intensities. The transmissivity reported in Fig. 2(a), although multi-valued, does not exhibit hysteresis since its branches do not present breaking points. However the low intensity multistable states can always be reached by selecting appropriate paths of the excitation plane (Iin,θ). Suppose, for example, the multistability responsible state L of Fig. 2(a), 2(c) and 2(d) (of intensity IL = 0.08 MW/cm2) is required to be reached. A possible operational way consists in exciting the state A and reaching the state C as discussed in the above hysteresis example. Now if from the state C the intensity is hold fixed and the angle is decreased, from Fig. 2(d) it is evident that the state I is reached since both the states C and I belongs to the same surface sheet of Fig. 2(c). From the state C one can now fix the angle and decrease the incident optical intensity thus eventually reaching the prescribed target state L. From L one can decrease the intensity thus reaching the state M from which, a further intensity decrement, produces (in analogy to the above described hysteresis loop) a sudden jump of the trasmittivity to N of Fig. 2(a), the corresponding state N of Fig. 2(c) belonging to the central surface sheet.

4. Full-wave simulations

In order to discuss the feasibility of the above predicted slab multistability we have performed 3D full-wave finite-element simulations [11

COMSOL, www.comsol.com.

] for evaluating the transmissivity of the slab in the presence of a TM radiation of free-space wavelength λ = 810 nm. We have chosen d1 = 2 nm, d2 = 5.25 nm, L = 258 nm, ɛ1 = −28.81 + 10i, ɛ2 = 10.9 − 3.8i, χ1 = 3.16 × 10−16 m2/V2 and |χ2| ≪ |χ1|. The parameters of medium 1 coincide with those of silver [12

E. D. Palik, Handbook of Optical Constants of Solids (Academic Press, San Diego, 1998).

], characterized by a very large nonlinear susceptibility [13

G. Yang, D. Guan, W. Wang, W. Wu, and Z. Chen, “The inherent optical nonlinearities of thin silver films,” Opt. Mater. 25, 439 (2004). [CrossRef]

], with the imaginary part of the permittivity corrected by the layer size effect (since d1 = 2 nm) [14

W. Cai and V. Shalaev, Optical Metamaterials: Fundamentals and Applications (Springer, Dordrecht, 2010).

]. Medium 2 is a linear dielectric with gain (to compensate the metal losses) and its permittivity ɛ2 can be achieved, for example, by embedding, in a polymer background, a bi-dimensional array of colloidal II–VI quantum dots which are properly electrically or optically pumped [15

Y. Fu, L. Thyln, and H. Agrenm, “A Lossless Negative Dielectric Constant from Quantum Dot Exciton Polaritons,” Nano Lett. 8, 1551 (2008). [CrossRef] [PubMed]

] through ultra-violet light. The value of ɛ2 here considered is obtained through the Maxwell Garnett mixing rule where ɛb = 9.26 and ɛQD = 10 – 15i [15

Y. Fu, L. Thyln, and H. Agrenm, “A Lossless Negative Dielectric Constant from Quantum Dot Exciton Polaritons,” Nano Lett. 8, 1551 (2008). [CrossRef] [PubMed]

] are the background polymer and quantum dots permittivities, respectively and f = 0.3 is the quantum dots volume filling fraction; besides both the polymer and the quantum dots have nonlinear susceptibility much smaller than χ1 so that the requirement |χ2| ≪ |χ1| is assured. The effective permittivity and nonlinear susceptibility of the considered sample are ɛ = (d1ɛ1 + d2ɛ2)/(d1 + d2) = − 0.054 + 0.007i and χ = (d1χ1 + d2χ2)/(d1 + d2) = 8.72 × 10−17 m2/V2. In Fig. 3(a) we report the comparison between the transmissivity evaluated through full-wave simulations for θ = 0.17 rad (dotted line) and the transmissivity of Fig. 2(b). We note that good agreement exists between the results of the two kind of simulations and, most importantly, that finite-element simulations still predicts the above discussed multistability thus proving its robustness. The origin of the discrepancies between the transmissivities lies in the fact that a surface plasmon resonance occurs when the TM wave impinges on the slab as reported in Fig. 1. Therefore an electric field y-component (Ey) of plasmonic origin arises mainly at the edges of the layers inside the medium and it is characterized by a sub-wavelength varying profile and an evanescent field tail in vacuum which does not contribute to the power flow. Evidently, if Ey is much smaller than Ex and Ez, the homogenization theory correctly describes the slab nonlinear behavior. In Fig. 3(b) we report the maximum values (within the medium) attained by the three field components for θ = 0.17 rad as a function of the incident optical intensity corresponding to the evaluated full-wave transmissivities reported in Fig. 3(a). It is evident that, outside the shaded region, Ey (dot-dashed line) is much smaller than both Ex and Ez (solid and dashed lines respectively) and in the corresponding regions of Fig. 3(a) the agreement with the homogenization approach is very satisfactory. Within the shaded region of Fig. 3(b), Ey is not negligible and this partially breaks the validity of the homogenization approach thus leading to the discrepancies of the transmissivities in the range 1 MW/cm2 < Iin < 4 MW/cm2 as reported in Fig. 3(a).

Fig. 3 (a) Comparison between the slab transmissivities evaluated through full-wave simulations (dotted lines) and those of Fig. 2(b) (solid lines). (b) Semi-log plot of the maximum values, within the layered medium bulk, of the normalized squared field components as a function of the normalized input field amplitude obtained for the full-wave evaluation of the slab transmissivity reported in panel (a).

5. Conclusion

In conclusion we have shown that a nonlinear metal-dielectric layered slab of subwavelength thickness with very small average permittivity is characterized by a very low bistability threshold and, most importantly, that it provides multistable states at arbitrary low optical intensities. Such ultra-low intensity multistable states are always accessible through a suitable excitation procedure involving both the incident intensity and the incidence angle. We believe that our findings can have a large impact on the devising of a novel class of nanophotonic devices with complex memory functionalities and operating at very low optical intensities (as compared to those generally required in standard nonlinear optics).

References and links

1.

A. Szoke, V. Daneu, J. Goldhar, and N. A. Kurnit, “Bistable optical element and its applications,” Appl. Phys. Lett. 15, 376 (1969). [CrossRef]

2.

E. Abraham and S. D. Smith, “Optical bistability and related devices,” Rep. Prog. Phys. 45, 815 (1982). [CrossRef]

3.

J. E. Sipe and R. W. Boyd, “Nonlinear susceptibility of composite optical materials in the Maxwell Garnett model,” Phys. Rev. A 46, 1614 (1992). [CrossRef] [PubMed]

4.

N. N. Lepeshkin, A. Schweinsberg, G. Piredda, R. S. Bennink, and R. W. Boyd, “Enhanced nonlinear optical response of one-dimensional metal-dielectric photonic crystals,” Phys. Rev. Lett 93, 123902 (2004). [CrossRef] [PubMed]

5.

A. Husakou and J. Herrmann, “Steplike transmission of light through a metal-dielectric multilayer structure due to an intensity-dependent sign of the effective dielectric constant,” Phys. Rev. Lett. 99, 127402 (2007). [CrossRef] [PubMed]

6.

J. Chen, P. Wang, X. Wang, Y. Lu, and R. Zheng, “Optical bistability enhanced by highly localized bulk plasmon polariton modes in subwavelength metal-nonlinear dielectric multilayer structure,” App. Phys. Lett. 94, 081117 (2009). [CrossRef]

7.

R. K. Hickernell and D. Sarid, “Optical bistability using prism-coupled, long-range surface plasmons,” J. Opt. Soc. Am. B 3, 1059 (1986). [CrossRef]

8.

A. Ciattoni, C. Rizza, and E. Palange, “Extreme nonlinear electrodynamics in metamaterials with very small linear dielectric permittivity,” Phys. Rev. A 81, 043839 (2010). [CrossRef]

9.

A. Ciattoni, C. Rizza, and E. Palange, “Transmissivity directional hysteresis of a nonlinear metamaterial slab with very small linear permittivity,” Opt. Lett. 35, 2130 (2010). [CrossRef] [PubMed]

10.

It is worth noting that, in the considered situation, the longitudinal component Az is not due to surface waves (which here are not excited) since, as explained in Sec. 2, the strong values of Az belonging to the lower sheet of the surface in Fig. 2(c) arises from the impact of the nonlinearity on the boundary matching conditions at z = 0 and z = L.

11.

COMSOL, www.comsol.com.

12.

E. D. Palik, Handbook of Optical Constants of Solids (Academic Press, San Diego, 1998).

13.

G. Yang, D. Guan, W. Wang, W. Wu, and Z. Chen, “The inherent optical nonlinearities of thin silver films,” Opt. Mater. 25, 439 (2004). [CrossRef]

14.

W. Cai and V. Shalaev, Optical Metamaterials: Fundamentals and Applications (Springer, Dordrecht, 2010).

15.

Y. Fu, L. Thyln, and H. Agrenm, “A Lossless Negative Dielectric Constant from Quantum Dot Exciton Polaritons,” Nano Lett. 8, 1551 (2008). [CrossRef] [PubMed]

OCIS Codes
(190.3270) Nonlinear optics : Kerr effect
(160.3918) Materials : Metamaterials

ToC Category:
Metamaterials

History
Original Manuscript: November 2, 2010
Revised Manuscript: November 24, 2010
Manuscript Accepted: December 9, 2010
Published: December 22, 2010

Citation
A. Ciattoni, C. Rizza, and E. Palange, "Multistability at arbitrary low optical intensities in a metal-dielectric layered structure," Opt. Express 19, 283-288 (2011)
http://www.opticsinfobase.org/oe/abstract.cfm?URI=oe-19-1-283


Sort:  Author  |  Year  |  Journal  |  Reset  

References

  1. A. Szoke, V. Daneu, J. Goldhar, and N. A. Kurnit, "Bistable optical element and its applications," Appl. Phys. Lett. 15, 376 (1969). [CrossRef]
  2. E. Abraham, and S. D. Smith, "Optical bistability and related devices," Rep. Prog. Phys. 45, 815 (1982). [CrossRef]
  3. J. E. Sipe, and R. W. Boyd, "Nonlinear susceptibility of composite optical materials in the Maxwell Garnett model," Phys. Rev. A 46, 1614 (1992). [CrossRef] [PubMed]
  4. N. N. Lepeshkin, A. Schweinsberg, G. Piredda, R. S. Bennink, and R. W. Boyd, "Enhanced nonlinear optical response of one-dimensional metal-dielectric photonic crystals," Phys. Rev. Lett. 93, 123902 (2004). [CrossRef] [PubMed]
  5. A. Husakou, and J. Herrmann, "Steplike transmission of light through a metal-dielectric multilayer structure due to an intensity-dependent sign of the effective dielectric constant," Phys. Rev. Lett. 99, 127402 (2007). [CrossRef] [PubMed]
  6. J. Chen, P. Wang, X. Wang, Y. Lu, and R. Zheng, "Optical bistability enhanced by highly localized bulk plasmon polariton modes in subwavelength metal-nonlinear dielectric multilayer structure," Appl. Phys. Lett. 94, 081117 (2009). [CrossRef]
  7. R. K. Hickernell, and D. Sarid, "Optical bistability using prism-coupled, long-range surface plasmons," J. Opt. Soc. Am. B 3, 1059 (1986). [CrossRef]
  8. A. Ciattoni, C. Rizza, and E. Palange, "Extreme nonlinear electrodynamics in metamaterials with very small linear dielectric permittivity," Phys. Rev. A 81, 043839 (2010). [CrossRef]
  9. A. Ciattoni, C. Rizza, and E. Palange, "Transmissivity directional hysteresis of a nonlinear metamaterial slab with very small linear permittivity," Opt. Lett. 35, 2130 (2010). [CrossRef] [PubMed]
  10. It is worth noting that, in the considered situation, the longitudinal component Az is not due to surface waves (which here are not excited) since, as explained in Sec. 2, the strong values of Az belonging to the lower sheet of the surface in Fig. 2(c) arises from the impact of the nonlinearity on the boundary matching conditions at z = 0 and z = L.
  11. COMSOL, www.comsol.com.
  12. E. D. Palik, Handbook of Optical Constants of Solids (Academic Press, San Diego, 1998).
  13. G. Yang, D. Guan, W. Wang, W. Wu, and Z. Chen, "The inherent optical nonlinearities of thin silver films," Opt. Mater. 25, 439 (2004). [CrossRef]
  14. W. Cai, and V. Shalaev, Optical Metamaterials: Fundamentals and Applications (Springer, Dordrecht, 2010).
  15. Y. Fu, L. Thylén, and H. Agrenm, "A Lossless Negative Dielectric Constant from Quantum Dot Exciton Polaritons," Nano Lett. 8, 1551 (2008). [CrossRef] [PubMed]

Cited By

 Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.

Figures

Fig. 1 Fig. 2 Fig. 3
 

« Previous Article  |  Next Article »

OSA is a member of CrossRef.

CrossCheck Deposited