Dipole emitters in fiber: interface effects, collection efficiency and optimization

doi:10.1364/OE.19.016182

« Show journal navigation

Dipole emitters in fiber: interface effects, collection efficiency and optimization

Matthew R. Henderson, Shahraam Afshar V., Andrew D. Greentree, and Tanya M. Monro »View Author Affiliations

Optics Express, Vol. 19, Issue 17, pp. 16182-16194 (2011)
http://dx.doi.org/10.1364/OE.19.016182

View Full Text Article

Acrobat PDF (798 KB)

Journal Search
Article Lookup

Article Tools

Citations

Alert me when this article is cited
Export Citation/Save

Article Navigation

▸ Article Outline
– Abstract
1. Introduction
2. Theory
3. Results
4. Conclusion
– References and links

Article Tools
Full Text
Article Info
References
Cited By
Figures
Metrics
Download PDF

Viewing Equations in the
HTML Article

Optimal Viewing Recommendations

Full Text
Article Info
References (29)
Cited By
Figures (5)
Metrics

Abstract

Single photon emitters coupled to optical fibers are becoming important as sources of non-classical light and nano-scale sensors. At present it is not possible to efficiently interface single photon emitters with the optical fiber platform, and there are particular challenges associated with the need to ensure highly efficient collection and delivery of emitted photons. To model single particle emission, we have considered the coupling of a dipole to an optical fiber mode as a function of orientation and position with respect to the core-cladding interface. Our model shows that it is possible to significantly enhance the collection efficiency into the guided modes as a result of modifications to the dipole emission pattern and power resulting from the surrounding fiber environment. For certain geometries the fiber-dipole coupling can result in a factor of 2.6 increase in the power emitted by the dipole.

1. Introduction

There is a considerable impetus to improve the collection of single photon emission for quantum key distribution and quantum metrological applications [1

I. Aharonovich, S. Castelletto, D. A. Simpson, C.-H. Su, A. D. Greentree, and S. Prawer, “Diamond based single photon emitters,” Rep. Prog. Phys. 74, 076501 (2011). [CrossRef]

]. However collection of emission from nano-scale objects is problematic, and in most practical settings, sensitivity is limited by photon collection efficiency. Here we explore a fiber-based approach to photon collection from dipole emitters. Some examples of the broad range of systems that are applicable to such analysis include fluorescence capture into optical fibers, crystal defect emission patterns and quantum dot radiation. In addition to single photon emission, our results also guide the exploration of the limits of sensing. The ultimate limit is single atom-scale sensors interacting with atomic objects of interest. Although there are many methods for signal transduction, optical readout provides one of the most convenient and robust methods.

The emission capture of fluorescence into the guided modes of optical fibers has been modelled previously [2

S. Afshar V., S. C. Warren-Smith, and T. M. Monro, “Enhancement of fluorescence-based sensing using microstructured optical fibres,” Opt. Express 15, 17891–17901 (2007). [CrossRef]

], although this did not take into account the effects of the interface on the emitters and assumed an isotropic and homogeneous distribution of emitters. Both the spontaneous emission rate and radiation pattern [3

E. M. Purcell, “Spontaneous emission probabilities at radio frequencies,” Phys. Rev. 69, 681 (1946).

–7

P. Anger, P. Bharadwaj, and L. Novotny, “Enhancement and quenching of single-molecule fluorescence,” Phys. Rev. Lett. 96, 113002 (2006). [CrossRef] [PubMed]

] of dipoles are known to change near an interface between two materials. The spontaneous emission rate and radiation pattern changes have been modelled for the case of a dielectric cylinder [4

W. Żakowicz and M. Janowicz, “Spontaneous emission in the presence of a dielectric cylinder,” Phys. Rev. A 62, 013820 (2000). [CrossRef]

, 5

T. Søndergaard and B. Tromborg, “General theory for spontaneous emission in active dielectric microstructures: example of a fiber amplifier,” Phys. Rev. A 64, 033812 (2001). [CrossRef]

]. Measurements and modelling of the effect of a planar interface [6

J.-P. Hermier, M. Dahan, X. Brokmann, and L. Coolen, “Emission properties of single CdSe/ZnS quantum dots close to a dielectric interface,” Chem. Phys. 318, 91–98 (2005). [CrossRef]

] and a gold nanoparticle [7

P. Anger, P. Bharadwaj, and L. Novotny, “Enhancement and quenching of single-molecule fluorescence,” Phys. Rev. Lett. 96, 113002 (2006). [CrossRef] [PubMed]

] on dipole emission have been performed. Emission capture into a tapered fiber from an emitter in a photonic crystal cavity has been demonstrated [8

I.-K. Hwang, S.-K. Kim, J.-K. Yang, S.-H. Kim, S. H. Lee, and Y.-H. Lee, “Curved-microfiber photon coupling for photonic crystal light emitter,” Appl. Phys. Lett. 87, 131107 (2005). [CrossRef]

, 9

K.-M. C. Fu, P. E. Barclay, C. Santori, A. Faraon, and R. G. Beausoleil, “Low-temperature tapered-fiber probing of diamond nitrogen-vacancy ensembles coupled to GaP microcavities,” New J. Phys. 13, 055023 (2011). [CrossRef]

], showing theoretical and experimental collection efficiencies of 84% and an estimated 70% respectively. Here we examine the coupling between a dipole and an optical fiber. Although this is a general problem, for concreteness we illustrate our theory by focussing on diamond color centers coupled to optical fibers. With minor modifications, our results can be translated to any nanoscale emitter coupled to any fiber mode.

Diamond color centers, defects in the diamond lattice, have been identified as an important platform for solid-state quantum information processing [10

D. D. Awschalom, R. Epstein, and R. Hanson, “The diamond age of spintronics,” Sci. Am. 297, 84–91 (2007). [CrossRef] [PubMed]

]. In particular, diamond can host a variety of room temperature, photostable bright single photon sources [1

I. Aharonovich, S. Castelletto, D. A. Simpson, C.-H. Su, A. D. Greentree, and S. Prawer, “Diamond based single photon emitters,” Rep. Prog. Phys. 74, 076501 (2011). [CrossRef]

]. Photon collection from color centers in bulk diamond is limited in efficiency by the large refractive index contrast of the diamond/air interface, as seen previously in semiconductor LEDs [11

H. Benisty, H. De Neve, and C. Weisbuch, “Impact of planar microcavity effects on light extraction — part I: basic concepts and analytical trends,” IEEE J. Quantum Electron. 34, 1612–1631 (1998). [CrossRef]

]. Such poor efficiencies (∼4–5% [11

]) limit the application of these sources to tasks such as quantum key distribution and quantum metrology. Incorporation of these color centers into photonic structures is important, in order to fabricate devices with these quantum properties. Access to a hybrid diamond-glass material [12

M. R. Henderson, B. C. Gibson, H. Ebendorff-Heidepriem, K. Kuan, S. Afshar V., J. O. Orwa, I. Aharonovich, S. Tomljenovic-Hanic, A. D. Greentree, S. Prawer, and T. M. Monro, “Diamond in tellurite glass: a new medium for quantum information,” Adv. Mater. 23, 2806–2810 (2011). [CrossRef] [PubMed]

] could allow the en-masse fabrication of such a device in the form of drawn optical fiber.

Advances in this area have previously been achieved by coupling the color centers to a photonic structure in order to modify the emission pattern for practical collection. Diamond nanopillars [13

T. M. Babinec, B. J. M. Hausmann, M. Khan, Y. Zhang, J. R. Maze, P. R. Hemmer, and M. Loncar, “A diamond nanowire single-photon source,” Nat. Nanotechnol. 5, 195–199 (2010). [CrossRef] [PubMed]

], microrings [14

A. Faraon, P. E. Barclay, C. Santori, K.-M. C. Fu, and R. G. Beausoleil, “Resonant enhancement of the zero-phonon emission from a colour centre in a diamond cavity,” Nat. Photonics 5, 301–305 (2011). [CrossRef]

] and solid immersion lenses [15

P. Siyushev, F. Kaiser, V. Jacques, I. Gerhardt, S. Bischof, H. Fedder, J. Dodson, M. Markham, D. Twitchen, F. Jelezko, and J. Wrachtrup, “Monolithic diamond optics for single photon detection,” Appl. Phys. Lett. 97, 241902 (2010). [CrossRef]

–17

L. Marseglia, J. P. Hadden, A. C. Stanley-Clarke, J. P. Harrison, B. Patton, Y.-L. D. Ho, B. Naydenov, F. Jelezko, J. Meijer, P. R. Dolan, J. M. Smith, J. G. Rarity, and J. L. O’Brien, “Nano-fabricated solid immersion lenses registered to single emitters in diamond,” Appl. Phys. Lett. 98, 1899 02 (2011).

] with embedded color centers have been fabricated from bulk diamond. Color center emission has been coupled to non-diamond cavity structures such as microdisk resonators [18

P. E. Barclay, C. Santori, K.-M. Fu, R. G. Beausoleil, and O. Painter, “Coherent interference effects in a nano-assembled diamond NV center cavity-QED system,” Opt. Express 17, 8081–8097 (2009). [CrossRef] [PubMed]

], photonic crystals [19

D. Englund, B. Shields, K. Rivoire, F. Hatami, J. Vučković, H. Park, and M. D. Lukin, “Deterministic coupling of a single nitrogen vacancy center to a photonic crystal cavity,” Nano Lett. 10, 3922–3926 (2010). [CrossRef] [PubMed]

], or microspheres [20

Y.-S. Park, A. K. Cook, and H. Wang, “Cavity QED with diamond nanocrystals and silica microspheres,” Nano Lett. 6, 2075–2079 (2006). [CrossRef] [PubMed]

] by nanopositioning the diamond nanocrystal onto the surface of the structure and coupling evanescently to the cavity. Color centers have been coupled to fiber structures by growing [21

J. Rabeau, S. Huntington, A. Greentree, and S. Prawer, “Diamond chemical-vapor deposition on optical fibers for fluorescence waveguiding,” Appl. Phys. Lett. 86, 134104 (2005). [CrossRef]

], or nanopositioning [22

S. Kuhn, C. Hettich, C. Schmitt, J. Poizat, and V. Sandoghdar, “Diamond colour centres as a nanoscopic light source for scanning near-field optical microscopy,” J. Microsc. 202, 2–6 (2001). [CrossRef] [PubMed]

–24

T. Schroder, A. W. Schell, G. Kewes, T. Aichele, and O. Benson, “Fiber-integrated diamond-based single photon source,” Nano Lett. 11, 198–202 (2011). [CrossRef]

], diamond nanocrystals onto the endfaces of fibers. For a review of diamond photonics see [25

I. Aharonovich, A. D. Greentree, and S. Prawer, “Diamond photonics,” Nat. Photonics 5, 397–405 (2011). [CrossRef]

We consider a new configuration for the capture of dipole emission, by either embedding the emitters within the core of a glass optical fiber [12

] or coating them onto the core surface. As demonstrated in this work, these architectures enable the performance of devices based on dipoles to be enhanced. Because the treatment we present here is applicable to a range of types of dipoles, we do not specify a precise emitter or wavelength. However, many of the most practical room-temperature single photon sources have their main emission features in the red to near infra-red band (e.g. negatively charged nitrogen vacancy, silicon-vacancy, NE8, silicon-nickel and chromium-related color centers) [1

I. Aharonovich, S. Castelletto, D. A. Simpson, C.-H. Su, A. D. Greentree, and S. Prawer, “Diamond based single photon emitters,” Rep. Prog. Phys. 74, 076501 (2011). [CrossRef]

], hence this band is used as the starting point for our fiber designs. Due to our recent demonstration of a versatile new nanodiamond-glass hybrid material [12

] based on tellurite [26

M. R. Oermann, H. Ebendorff-Heidepriem, Y. Li, T.-C. Foo, and T. M. Monro, “Index matching between passive and active tellurite glasses for use in microstructured fiber lasers: erbium doped lanthanum-tellurite glass,” Opt. Express 17, 15578–15584 (2009). [CrossRef] [PubMed]

], a soft glass, we will focus on a tellurite core design in this work. This modelling work can be employed to exploit the potential of fiber devices made using this material by guiding the fiber design and can be used for the optimization of a broad range of emitters and fiber materials.

Here we derive an equation to describe the nanocrystal emission, in a fashion similar to [4

W. Żakowicz and M. Janowicz, “Spontaneous emission in the presence of a dielectric cylinder,” Phys. Rev. A 62, 013820 (2000). [CrossRef]

], and use this to investigate the emitted power coupled into the fiber. This begins in Section 2, with the derivation of the equations that describe this capture, by representing the diamond emission as a summation of guided fiber modes and radiation modes and calculating the power in each of these modes. In Section 3 we explore the effect of varying core diameter, index contrast, and dipole position and orientation on the emission captured into the fiber’s guided modes. High capture efficiencies and an enhancement of emission power from the high index contrast fiber are observed, which bodes well for future work towards highly efficient single photon devices based on microstructured optical fiber designs.

2. Theory

We model the diamond color center as a dipole with dipole moment p ₀ and position r ₀ = [r ₀, θ ₀, z ₀] oscillating with a frequency ω. Here we do not consider the linewidth of the dipole emission and assume that the emission is at a single wavelength. Since the typical dimensions of the diamond nanocrystals to be embedded in the tellurite [12

] is 40nm and most single photon diamond center emission is at a wavelength of ∼ 650–750 nm [1

I. Aharonovich, S. Castelletto, D. A. Simpson, C.-H. Su, A. D. Greentree, and S. Prawer, “Diamond based single photon emitters,” Rep. Prog. Phys. 74, 076501 (2011). [CrossRef]

], it is reasonable to assume that the refractive index of the background medium (in this case tellurite glass, n = 2.02) is not significantly perturbed by the introduction of low concentrations (ideally isolated) of diamond nanocrystals (n ≈ 2.4) and so we treat the optical properties of the material as isotropic. The fiber is modelled as an infinitely long dielectric cylinder of radius r _co and refractive index n _co surrounded by an infinite region of refractive index n _cl. This geometry (shown in Fig. 1) is a reasonable approximation for the guided modes of step-index optical fibers, nanowires, or some classes of microstructured optical fibers such as suspended core optical fibers [27

T. M. Monro, S. Warren-Smith, E. P. Schartner, A. François, S. Heng, H. Ebendorff-Heidepriem, and S. Afshar V., “Sensing with suspended-core optical fibers,” Opt. Fiber Technol. 16, 343–356 (2010). [CrossRef]

Fig. 1 Schematic of the modelling system.

We expand the total field emitted by the dipole into two main components: the guided modes of the fiber and radiation modes, which is defined to be any part of the total field that cannot be expressed in terms of guided modes, as per Ref. [28

A. Snyder and J. Love, Optical Waveguide Theory (Springer, 1983).

]. Guided modes have discrete propagation constants (kn _cl < β_j ≤ kn _co) and are solutions to the wave equation in the step-index fiber, while radiation modes span a continuum of propagation constants (0 ≤ β _rad < kn _cl). The total electric field emitted by the dipole can be written as:

E = \sum_{j} a_{j} (z) e_{j} e^{- i β_{j} z} + a_{- j} (z) e_{- j} e^{i β_{- j} z} + radiation modes

(1)

where β is the mode propagation constant, e is the mode electric field expression, and a is the mode coefficient, for the jth mode of the fiber (with −j denoting a backward propagating mode). The magnetic field is expanded similarly. We can then solve for the mode coefficients, a, to find the power coupled into each mode from the dipole’s emission. The e _j and β_j can be calculated by solving Maxwell’s equations. For the guided modes, this gives the expected step-index mode field expressions [28

A. Snyder and J. Love, Optical Waveguide Theory (Springer, 1983).

]. To calculate the radiation modes, we separate the field into two terms, one representing the field in the absence of the waveguide (‘free-space’) and a second term that includes scattering from the waveguide. This separation appears in the cladding field as a Hankel function expression for boundary condition matching due to the presence of the fiber. Inside the fiber, as with the guided modes, a J bessel function fully satisfies the boundary condition. The radiation modes are then of the form [28

A. Snyder and J. Love, Optical Waveguide Theory (Springer, 1983).

e_{z} = {\begin{array}{l} a_{ν} J_{ν} (U R) f_{ν} (θ) & 0 \leq r < r_{co} \\ [c_{ν}^{f} J_{ν} (Q R) + c_{ν}^{s} H_{ν}^{(1)} (Q R)] f_{ν} (θ) & r_{co} \leq r < \infty \end{array}

(2)

h_{z} = {\begin{array}{l} b_{ν} J_{ν} (U R) g_{ν} (θ) & 0 \leq r < r_{co} \\ [d_{ν}^{f} J_{ν} (Q R) + d_{ν}^{s} H_{ν}^{(1)} (Q R)] g_{ν} (θ) & r_{co} \leq r < \infty \end{array}

(3)

f_{ν} (θ) = {\begin{array}{l} cos (ν θ) & even modes \\ sin (ν θ) & odd modes \end{array}

(4)

g_{ν} (θ) = {\begin{array}{l} - sin (ν θ) & even modes \\ cos (ν θ) & odd modes \end{array}

(5)

where ν is an azimuthal mode index, a_ν , b_ν ,

c_{ν}^{f}

c_{ν}^{s}

d_{ν}^{f}

and

d_{ν}^{s}

are constants (see Appendix) found by applying the continuity conditions at the core-cladding interface, Q is used instead of β and is defined as

Q = r_{co} {(k^{2} n_{cl}^{2} - β^{2})}^{1 / 2},

(6)

and the superscripts f and s denote the ‘free-space’ and scattering terms, respectively. The four other components of the electric and magnetic field, e_r , e_θ , h_r and h_θ , can be expressed in terms of the derivatives of e_z and h_z [28

A. Snyder and J. Love, Optical Waveguide Theory (Springer, 1983).

] (see Appendix).

A collection of dipoles with dipole moments p _j , frequencies ω_j and positions r _j contribute to a polarisation density given by:

P (r) = \sum_{j} p_{j} e^{i ω_{j} t} δ (r - r_{j})

(7)

For the case of a single dipole, this becomes P(r) = p ₀exp(iωt)δ(r – r ₀). The current density associated with this dipole is:

J = \frac{\partial P}{\partial t} = i ω p_{0} e^{i ω t} δ (r - r_{0})

(8)

We use the reciprocity theorem [28

A. Snyder and J. Love, Optical Waveguide Theory (Springer, 1983).

]

\frac{\partial}{\partial z} \int_{A_{\infty}} F \cdot \hat{z} d A = \int_{A_{\infty}} \nabla \cdot F d A

(9)

with F = E × H̄ ^* + Ē ^* × H. In this equation E and H are the total fields as defined above in Eq. (1) with an associated current density J as defined in Eq. (8). Here the barred variables (Ē, H̄ and associated current density J̄) correspond to a system with no dipole and a single mode, such that Ē and H̄ consist of any one mode from the expansion in Eq. (1), to give:

\bar{E} = e_{j} e^{i β_{j} z}, \bar{H} = h_{j} e^{i β_{j} z}, \bar{J} = 0

(10)

We then use Eq. (9) to solve for the mode coefficients, a_j , by substituting for these values. By assuming a non-absorbing waveguide (tellurite has a material loss of less than 1 dBm⁻¹ from 600–1400 nm [26

]) and using the orthogonality of the modes, shown in Eqs. (13) and (14), we find the mode coefficients to be:

a_{j} = \frac{i ω}{4 N_{j}} e^{- i ω t} e^{i β_{j} z_{0}} [e_{j}^{*} (r_{0}) \cdot p_{0} (r_{0})]

(11)

where ω is the frequency of the dipole and N_j is a normalisation term given by:

N_{j} = \frac{1}{2} \int_{A_{\infty}} (e \times h^{*}) \cdot \hat{z} d A

(12)

The guided modes satisfy the orthogonality condition

\int_{A_{\infty}} (e_{j} \times h_{k}^{*}) \cdot \hat{z} d A = \int_{A_{\infty}} (e_{j}^{*} \times h_{k}) \cdot \hat{z} d A = 0 for j \neq k

(13)

and in a similar fashion for the radiation modes, taking into account the continuous nature of the propagation constant,

\begin{array}{l} \int_{A_{\infty}} [e_{j} (Q) \times h_{k}^{*} (Q')] . \hat{z} d A = \int_{A_{\infty}} [e_{j}^{*} (Q') \times h_{k} (Q)] \cdot \hat{z} d A = 0 \\ for all Q if j \neq k, and for Q \neq Q' if j = k \end{array}

(14)

The power in each mode, P_j , can then be calculated from these mode coefficients by P_j = |a_j |² N_j . The total dipole emission power is also calculated from the mode coefficients by summing the power captured into all modes (all guided and radiation modes), i.e.

P_{total} = \sum_{j} P_{j} + \sum_{ν} \int P_{ν} (Q) d Q

(15)

Summation of the radiation power includes an integral due to the continuous nature of the allowed β values, where β has been re-defined in terms of Q as in Eq. (6). The total power emitted by the dipole must be calculated in this way, rather than as in a bulk material, because of the creation of a cavity due to the fiber core-cladding interface. This alters the dipole emission characteristics [3

E. M. Purcell, “Spontaneous emission probabilities at radio frequencies,” Phys. Rev. 69, 681 (1946).

–7

P. Anger, P. Bharadwaj, and L. Novotny, “Enhancement and quenching of single-molecule fluorescence,” Phys. Rev. Lett. 96, 113002 (2006). [CrossRef] [PubMed]

] and leads to constructive or destructive interference resonances as the core diameter changes. Such resonances lead to the enhancement in the dipole emission in some cases. By using the mode coefficients, we include the effects of the core and cladding on the total field, and hence on the total power. This allows the full effect of the fiber on the emission to be calculated, and enables the estimation of both the capacity of the fiber to capture the emitted photons and also the changes in the dipole emission due to the surrounding environment.

3. Results

The total power emitted by a radially-oriented dipole located in the center (labeled ‘center’) and at the core-cladding interface (labeled ‘interface’) of the tellurite fiber is shown in Fig. 2a. The surrounding environment clearly has a significant effect on the dipole emission behaviour, with both the total emission power and the emission pattern changing significantly when constructive or destructive interference occurs due to the core-cladding interface. This is consistent with previous reports [4

W. Żakowicz and M. Janowicz, “Spontaneous emission in the presence of a dielectric cylinder,” Phys. Rev. A 62, 013820 (2000). [CrossRef]

, 5

T. Søndergaard and B. Tromborg, “General theory for spontaneous emission in active dielectric microstructures: example of a fiber amplifier,” Phys. Rev. A 64, 033812 (2001). [CrossRef]

] that placing the dipole in the vicinity of the step-index waveguide can increase the emitted power above that of a dipole in a bulk (homogeneous) material. Here we have calculated this power change as a function of the fiber’s core diameter. This power has been normalized to the power emitted in bulk tellurite to highlight the effect of the waveguide.

Fig. 2 (a) Power emitted by dipole vs. core diameter for a tellurite (n = 2.025) core fiber with an air cladding. A radially oriented dipole emitting at a wavelength of 700nm is located in the core center (red line) and alternately on the cladding side (blue line) of the core-cladding interface. Black dots show the comparison of data calculated using expressions in this paper to that obtained via the finite-difference time domain (FDTD) method. Power has been normalized to the power in a bulk material of the same index. The power oscillates above and below the bulk emitted power from changes in the interference condition due to the varying core diameter. (b) Total power vs. FDTD resolution showing convergence of FDTD solution for 0.4 μm core diameter fiber. Resolution is number of sampling points per wavelength (700 nm).

Our results show that the total power oscillates above and below the bulk power as the varying core diameter changes the resonance condition of the dipole emission. It can be seen from Fig. 2a that the power emitted by a dipole on the core-cladding interface is approximately double that of a dipole located in the core center for the case of a radially oriented dipole. It can also be seen that, for a dipole located in the core center, as the core diameter increases, the emitted power tends towards the bulk power. In other words, the fiber begins to resemble the bulk tellurite at large core diameters, as expected. For the case of a dipole at the center, the power approaches zero for small core diameters rather than the cladding emission power. This can be understood by looking at the dipole environment. Regardless of core size, the dipole remains located in the core material and, as the core diameter reduces, the dipole approaches the core-cladding interface. In contrast, for a dipole located on the interface the surroundings approach an environment that consists only of the cladding material.

Simulations based on the equations derived in Section 2 show good agreement (see ‘center’ curve in Fig. 2a) with data obtained computationally using the finite-difference time domain (FDTD) method, shown as black dots in Fig. 2a. This confirms the validity of this model as the FDTD method directly calculates the electric and magnetic fields in a grid system using Maxwell’s equations and so is an independent method to the equations shown here. The FDTD package Meep [29

A. F. Oskooi, D. Roundy, M. Ibanescu, P. Bermel, J. D. Joannopoulos, and S. G. Johnson, “MEEP: a flexible free-software package for electromagnetic simulations by the FDTD method,” Comput. Phys. Commun. 181, 687–702 (2010). [CrossRef]

] was used to perform these calculations. The boundaries of the computational space consisted of absorbing perfectly matched layers (PMLs) with a thickness of 1 distance unit for all calculations. The distance unit was defined as the free-space wavelength of 700 nm, to which all distances were normalized. Grid resolutions (the number of calculated points per distance unit) of 55, 55, and 30 were used for the 0.2, 0.42 and 0.6 μm core diameter calculations, respectively. The power was calculated by summing the integral of the Poynting vector normal to a sphere (with radius greater than the core radius and centered on the dipole emitter) at each time step in the calculation. Figure 2b shows convergence data for the FDTD method as a function of increasing grid resolution for the 0.42 μm core diameter case.

The power captured into the guided modes of the fiber is shown in Fig. 3 for a range of core diameters and two dipole positions (at the core center and on the core surface). The captured power has been normalized to the total power emitted by a dipole in bulk diamond, rather than bulk tellurite, to highlight the changes from the addition of the fiber structure and to more easily compare the captured fiber power to that obtained with the more traditional approach of collecting from a color center in a diamond crystal. Due to the large capture efficiency of the fiber and the increase in total power of the dipole, we find that the power captured into the guided modes of the fiber can be greater than the total emitted power of a dipole in bulk diamond. This is shown in Fig. 3a with a radially oriented dipole at the core-cladding interface. That is, for a specific dipole orientation and position, a fiber can collect ∼ 102% of the power emitted in total in a bulk diamond environment. More generally, for many core diameters and dipole positions, the power captured is greater than 20% of the power emitted in bulk diamond and it is typically higher for a radially oriented dipole (∼ 50–60%). The discontinuities in the plots are due to the appearance of new guided modes as the core diameter is increased. Note that the radial and azimuthal orientations are equivalent for the case of a dipole at the center of the core.

Fig. 3 Power captured into the fiber guided modes vs. core diameter for a tellurite core fiber in air cladding with a dipole emitting at a wavelength of 700nm in the core center and also on the cladding side of the core-cladding interface. Power is normalized to the total power emitted by the dipole in a bulk (homogeneous) diamond material. (a) Radially (r̂) oriented dipole. (b) Azimuthally ( $\hat{θ}$ ) oriented dipole. (c) longitudinally (ẑ) oriented dipole. For most core diameters and dipole orientations the power captured into the guided modes of the fiber is greater than 20% of the power emitted in bulk diamond. For a specific orientation and core diameter (radial dipole at 0.22 μm) the captured power can be greater than the total power emitted in bulk diamond. Note that at the center of the core the radial and azimuthal orientations are equivalent.

Figure 4 shows the effect of the choice of the core material on the emission capture. The plot shows the captured power, in Figs. 4a and 4c, and the total power, in Figs. 4b and 4d, from the dipole at varying core diameters for three core materials: F2, SF57, (both commercially available silicate glasses) and tellurite (n = 1.61, 1.83 and 2.02 respectively at 700 nm wavelength). This shows that, as might be expected, strong capture is best achieved with a higher core refractive index. This effect is due to both the total emission power increasing and an increase in capture from the higher index, which can be seen by comparing the increase in total and guided power. As can be seen in Fig. 4, the peak total power increase from F2 to tellurite for a dipole at the interface is 2.2/1.39 = 1.58, whereas the peak guided power increase is 1.02/0.49 = 2.08, showing that the increase in total power alone does not account for the guided power increase.

Fig. 4 Power vs. core diameter for an air-clad step index fiber with three different core materials: F2, SF57 and tellurite (n = 1.61, 1.83 and 2.02 respectively at 700 nm). (a) Total power and (b) guided power for a dipole positioned at the core center. (c) Total power and (d) guided power for a dipole positioned on the cladding side of the core-cladding interface. The dipole is radially oriented and emitting at a wavelength of 700nm. Power is normalized to the total power emitted by the dipole in a bulk (homogeneous) diamond material. As might be expected, captured power increases as the core index is increased.

The dipole position and orientation also has an effect on the capture of the dipole emission into the guided modes. Figure 5 shows the captured power as a function of dipole radial position for a radially oriented dipole. The discontinuity of the electric field at the core-cladding interface, visible at r = r _co, generates a large radial electric field for the guided modes on the core surface (the cladding side of the core-cladding interface). As the dipole coupling equation, Eq. (11), includes an E · p term, this large radial field leads to a large capture into the guided modes for a radially oriented dipole.

Fig. 5 Plots for a tellurite core fiber in air cladding with a radially oriented dipole emitting at a wavelength of 700nm. (a) Power captured into the fiber guided modes vs. dipole radial position for a fiber with a core diameter of 0.22 μm. (b) Power captured vs. core diameter, showing the core diameter at which the previous plot was calculated. Power is normalized to the total power emitted by the dipole in a bulk (homogeneous) diamond material. The discontinuity at the core-cladding interface is due to the discontinuity of the radial field.

4. Conclusion

We have presented a full-vectorial model describing the emission of a dipole in the vicinity of a step-index optical fiber. We show that the total power of the dipole changes depending on its orientation and position with respect to the fiber and that the emitted power can be ∼ 2.6 times that of a dipole in a bulk material with the same refractive index. Interestingly, we have found that due to changes in the emitted power from interface effects, the emission power collected by the fiber can be larger than the total power emitted by a center in bulk diamond. This shows that a high index contrast fiber could perform well for single photon collection, due to both efficient capture and increased emission power. This model can be used to guide the fabrication of a single photon source which, because of the large capture efficiency obtainable, could be used in applications such as quantum key distribution or quantum metrology. The fabrication of such a device presents many practical challenges, such as reducing the background photon count (from both the pump source and material fluorescence) and preventing the excitation of multiple color centers. However, these results show that such a device design could be a candidate for an efficient single photon source.

Appendices

Appendix

The radiation mode expressions for the radial and azimuthal fields can be found using [28

A. Snyder and J. Love, Optical Waveguide Theory (Springer, 1983).

]

e_{r} = \frac{i}{k^{2} n^{2} - β^{2}} [β \frac{\partial e_{z}}{\partial r} + {(\frac{μ_{0}}{ɛ_{0}})}^{\frac{1}{2}} \frac{k}{r} \frac{\partial h_{z}}{\partial θ}]

(16)

e_{θ} = \frac{i}{k^{2} n^{2} - β^{2}} [\frac{β}{r} \frac{\partial e_{z}}{\partial θ} - {(\frac{μ_{0}}{ɛ_{0}})}^{\frac{1}{2}} k \frac{\partial h_{z}}{\partial r}]

(17)

Substituting the expressions for e_z and h_z , Eqs. (2) and (3), into the above equations, Eqs. (16) and (17), gives:

For 0 ≤ r < r _co

\begin{array}{l} e_{r} = \frac{f_{ν} (θ)}{k^{2} n_{core}^{2} - β^{2}} \frac{i U}{2 r_{co}} {β a_{ν} [J_{ν - 1} (U R) - J_{ν + 1} (U R)] \\ - {(\frac{μ_{0}}{ɛ_{0}})}^{\frac{1}{2}} k b_{ν} [J_{ν - 1} (U R) + J_{ν + 1} (U R)]} \end{array}

(18)

\begin{array}{l} e_{θ} = \frac{g_{ν} (ϕ)}{k^{2} n_{core}^{2} - β^{2}} \frac{i U}{2 r_{co}} {β a_{ν} [J_{ν - 1} (U R) + J_{ν + 1} (U R)] \\ - {(\frac{μ_{0}}{ɛ_{0}})}^{\frac{1}{2}} k b_{ν} [J_{ν - 1} (U R) - J_{ν + 1} (U R)]} \end{array}

(19)

For r _co ≤ r < ∞

\begin{array}{l} e_{r} = \frac{f_{ν} (θ)}{k^{2} n_{clad}^{2} - β^{2}} \frac{i Q}{2 r_{co}} (β {c_{ν}^{f} [J_{ν - 1} (Q R) - J_{ν + 1} (Q R)] + c_{ν}^{s} [H_{ν - 1}^{(1)} (Q R) - H_{ν + 1}^{(1)} (Q R)]} \\ - k {(\frac{μ_{0}}{ɛ_{0}})}^{\frac{1}{2}} {d_{ν}^{f} [J_{ν - 1} (Q R) + J_{ν + 1} (Q R)] + d_{ν}^{s} [H_{ν - 1}^{(1)} (Q R) + H_{ν + 1}^{(1)} (Q R)]}) \end{array}

(20)

\begin{array}{l} e_{θ} = \frac{g_{ν} (ϕ)}{k^{2} n_{clad}^{2} - β^{2}} \frac{i Q}{2 r_{co}} (β {c_{ν}^{f} [J_{ν - 1} (Q R) + J_{ν + 1} (Q R)] + c_{ν}^{s} [H_{ν - 1}^{(1)} (Q R) + H_{ν + 1}^{(1)} (Q R)]} \\ - k {(\frac{μ_{0}}{ɛ_{0}})}^{\frac{1}{2}} {d_{ν}^{f} [J_{ν - 1} (Q R) - J_{ν + 1} (Q R)] + d_{ν}^{s} [H_{ν - 1}^{(1)} (Q R) - H_{ν + 1}^{(1)} (Q R)]}) \end{array}

(21)

where

U = r_{co} {(k^{2} n_{co}^{2} - β^{2})}^{1 / 2}

Q = r_{co} {(k^{2} n_{cl}^{2} - β^{2})}^{1 / 2}

, V ² = U ² – Q ², and R = r/r _co. The radiation mode coefficients (in Ref. [28

A. Snyder and J. Love, Optical Waveguide Theory (Springer, 1983).

] Table 25-3, page 525) appearing in Eqs. (2) and (3) are shown here in Table 1 for completeness. These coefficients are calculated by applying the boundary conditions to the electric and magnetic field expressions at the fiber core-cladding interface, i.e. e_z , e_θ , h_z , and h_θ are continuous at the interface.

Table 1 Coefficients Appearing in Eqs. (2) and (3) for ‘TM-like’ (ITM) and ‘TE-like’ (ITE) Radiation Modes ^*

	ITE modes	ITM modes
a_ν	$- \frac{4}{π} \frac{β}{k n_{co}^{2}} \frac{ν}{k r_{co}} \frac{V^{2}}{U^{2} Q^{3}} \frac{1}{J_{ν} (U) H_{ν}^{(1)} (Q) M_{ν}}$	$- \frac{4}{π} \frac{n_{cl}^{2}}{n_{co}^{2}} \frac{1}{β r_{co} Q} \frac{F_{ν}}{J_{ν} (U) H_{ν}^{(1)} (Q) M_{ν}}$
b_ν	$- \frac{4}{π} {(\frac{ɛ_{0}}{μ_{0}})}^{\frac{1}{2}} \frac{1}{Q k r_{co}} \frac{G_{ν}}{J_{ν} (U) H_{ν}^{(1)} (Q) M_{ν}}$	$- \frac{4}{π} \frac{n_{cl}^{2}}{n_{co}^{2}} {(\frac{ɛ_{0}}{μ_{0}})}^{\frac{1}{2}} \frac{ν}{k r_{co}} \frac{V^{2}}{U^{2} Q^{3}} \frac{1}{J_{ν} (U) H_{ν}^{(1)} (Q) M_{ν}}$
$c_{ν}^{f}$	0	$2 i \frac{Q}{β r_{co}}$
$c_{ν}^{s}$	$- \frac{4}{π} \frac{β}{k n_{co}^{2}} \frac{ν}{k r_{co}} \frac{V^{2}}{U^{2} Q^{3}} \frac{1}{{H_{ν}^{(1)} (Q)}^{2} M_{ν}}$	$- 2 i \frac{Q}{β r_{co}} \frac{J_{ν} (Q)}{H_{ν}^{(1)} (Q)} \frac{A_{ν}}{M_{ν}}$
$d_{ν}^{f}$	$2 i {(\frac{ɛ_{0}}{μ_{0}})}^{\frac{1}{2}} \frac{Q}{r_{co} k}$	0
$d_{ν}^{s}$	$- 2 i {(\frac{ɛ_{0}}{μ_{0}})}^{\frac{1}{2}} \frac{Q}{r_{co} k} \frac{J_{ν} (Q)}{H_{ν}^{(1)} (Q)} \frac{B_{ν}}{M_{ν}}$	$- \frac{4}{π} \frac{n_{cl}^{2}}{n_{co}^{2}} {(\frac{ɛ_{0}}{μ_{0}})}^{\frac{1}{2}} \frac{ν}{r_{co} k} \frac{V^{2}}{U^{2} Q^{3}} \frac{1}{{H_{ν}^{(1)} (Q)}^{2} M_{ν}}$
N_j	$\frac{2 π r_{co}^{2}}{Q} {(\frac{ɛ_{0}}{μ_{0}})}^{\frac{1}{2}} \frac{β}{k} \times {\begin{array}{l} 1 & for ν > 0 \\ 2 & for ν = 0 \end{array}$	$\frac{2 π r_{co}^{2}}{Q} {(\frac{ɛ_{0}}{μ_{0}})}^{\frac{1}{2}} \frac{k n_{cl}^{2}}{β} \times {\begin{array}{l} 1 & for ν > 0 \\ 2 & for ν = 0 \end{array}$

^* These correspond to the pure TM and TE modes in the ‘free-space’ terms that are subsequently altered by the perturbation of the waveguide. From [28

A. Snyder and J. Love, Optical Waveguide Theory (Springer, 1983).

F_{ν} = \frac{J_{ν}^{'} (U)}{U J_{ν} (U)} - \frac{H_{ν}^{(1)'} (Q)}{Q H_{ν}^{(1)} (Q)}

(22)

G_{ν} = \frac{J_{ν}^{'} (U)}{U J_{ν} (U)} - \frac{n_{cl}^{2}}{n_{co}^{2}} \frac{H_{ν}^{(1)'} (Q)}{Q H_{ν}^{(1)} (Q)}

(23)

A_{ν} = M_{ν} - \frac{2 i}{π} \frac{n_{cl}^{2}}{n_{co}^{2}} \frac{F_{ν}}{Q^{2} J_{ν} (Q) H_{ν}^{(1)} (Q)}

(24)

B_{ν} = M_{ν} - \frac{2 i}{π} \frac{G_{ν}}{Q^{2} J_{ν} (Q) H_{ν}^{(1)} (Q)}

(25)

M_{ν} = {(\frac{ν β}{k n_{co}})}^{2} {(\frac{V}{U Q})}^{4} - F_{ν} G_{ν}

(26)

Acknowledgments

A.D.G. acknowledges the support of an ARC Queen Elizabeth II Fellowship ( DP0880466). T.M.M. acknowledges the support of an ARC Federation Fellowship ( FF0883189). The authors acknowledge Stephen Warren-Smith for preceding fluorescence capture modelling.

References and links

1.	I. Aharonovich, S. Castelletto, D. A. Simpson, C.-H. Su, A. D. Greentree, and S. Prawer, “Diamond based single photon emitters,” Rep. Prog. Phys. 74, 076501 (2011). [CrossRef]
2.	S. Afshar V., S. C. Warren-Smith, and T. M. Monro, “Enhancement of fluorescence-based sensing using microstructured optical fibres,” Opt. Express 15, 17891–17901 (2007). [CrossRef]
3.	E. M. Purcell, “Spontaneous emission probabilities at radio frequencies,” Phys. Rev. 69, 681 (1946).
4.	W. Żakowicz and M. Janowicz, “Spontaneous emission in the presence of a dielectric cylinder,” Phys. Rev. A 62, 013820 (2000). [CrossRef]
5.	T. Søndergaard and B. Tromborg, “General theory for spontaneous emission in active dielectric microstructures: example of a fiber amplifier,” Phys. Rev. A 64, 033812 (2001). [CrossRef]
6.	J.-P. Hermier, M. Dahan, X. Brokmann, and L. Coolen, “Emission properties of single CdSe/ZnS quantum dots close to a dielectric interface,” Chem. Phys. 318, 91–98 (2005). [CrossRef]
7.	P. Anger, P. Bharadwaj, and L. Novotny, “Enhancement and quenching of single-molecule fluorescence,” Phys. Rev. Lett. 96, 113002 (2006). [CrossRef] [PubMed]
8.	I.-K. Hwang, S.-K. Kim, J.-K. Yang, S.-H. Kim, S. H. Lee, and Y.-H. Lee, “Curved-microfiber photon coupling for photonic crystal light emitter,” Appl. Phys. Lett. 87, 131107 (2005). [CrossRef]
9.	K.-M. C. Fu, P. E. Barclay, C. Santori, A. Faraon, and R. G. Beausoleil, “Low-temperature tapered-fiber probing of diamond nitrogen-vacancy ensembles coupled to GaP microcavities,” New J. Phys. 13, 055023 (2011). [CrossRef]
10.	D. D. Awschalom, R. Epstein, and R. Hanson, “The diamond age of spintronics,” Sci. Am. 297, 84–91 (2007). [CrossRef] [PubMed]
11.	H. Benisty, H. De Neve, and C. Weisbuch, “Impact of planar microcavity effects on light extraction — part I: basic concepts and analytical trends,” IEEE J. Quantum Electron. 34, 1612–1631 (1998). [CrossRef]
12.	M. R. Henderson, B. C. Gibson, H. Ebendorff-Heidepriem, K. Kuan, S. Afshar V., J. O. Orwa, I. Aharonovich, S. Tomljenovic-Hanic, A. D. Greentree, S. Prawer, and T. M. Monro, “Diamond in tellurite glass: a new medium for quantum information,” Adv. Mater. 23, 2806–2810 (2011). [CrossRef] [PubMed]
13.	T. M. Babinec, B. J. M. Hausmann, M. Khan, Y. Zhang, J. R. Maze, P. R. Hemmer, and M. Loncar, “A diamond nanowire single-photon source,” Nat. Nanotechnol. 5, 195–199 (2010). [CrossRef] [PubMed]
14.	A. Faraon, P. E. Barclay, C. Santori, K.-M. C. Fu, and R. G. Beausoleil, “Resonant enhancement of the zero-phonon emission from a colour centre in a diamond cavity,” Nat. Photonics 5, 301–305 (2011). [CrossRef]
15.	P. Siyushev, F. Kaiser, V. Jacques, I. Gerhardt, S. Bischof, H. Fedder, J. Dodson, M. Markham, D. Twitchen, F. Jelezko, and J. Wrachtrup, “Monolithic diamond optics for single photon detection,” Appl. Phys. Lett. 97, 241902 (2010). [CrossRef]
16.	T. Schröder, F. Gädeke, M. J. Banholzer, and O. Benson, “Ultra-bright and efficient single photon generation based on n-v centres in nanodiamonds on a solid immersion lens,” New J. Phys. 13, 055017 (2011). [CrossRef]
17.	L. Marseglia, J. P. Hadden, A. C. Stanley-Clarke, J. P. Harrison, B. Patton, Y.-L. D. Ho, B. Naydenov, F. Jelezko, J. Meijer, P. R. Dolan, J. M. Smith, J. G. Rarity, and J. L. O’Brien, “Nano-fabricated solid immersion lenses registered to single emitters in diamond,” Appl. Phys. Lett. 98, 1899 02 (2011).
18.	P. E. Barclay, C. Santori, K.-M. Fu, R. G. Beausoleil, and O. Painter, “Coherent interference effects in a nano-assembled diamond NV center cavity-QED system,” Opt. Express 17, 8081–8097 (2009). [CrossRef] [PubMed]
19.	D. Englund, B. Shields, K. Rivoire, F. Hatami, J. Vučković, H. Park, and M. D. Lukin, “Deterministic coupling of a single nitrogen vacancy center to a photonic crystal cavity,” Nano Lett. 10, 3922–3926 (2010). [CrossRef] [PubMed]
20.	Y.-S. Park, A. K. Cook, and H. Wang, “Cavity QED with diamond nanocrystals and silica microspheres,” Nano Lett. 6, 2075–2079 (2006). [CrossRef] [PubMed]
21.	J. Rabeau, S. Huntington, A. Greentree, and S. Prawer, “Diamond chemical-vapor deposition on optical fibers for fluorescence waveguiding,” Appl. Phys. Lett. 86, 134104 (2005). [CrossRef]
22.	S. Kuhn, C. Hettich, C. Schmitt, J. Poizat, and V. Sandoghdar, “Diamond colour centres as a nanoscopic light source for scanning near-field optical microscopy,” J. Microsc. 202, 2–6 (2001). [CrossRef] [PubMed]
23.	E. Ampem-Lassen, D. A. Simpson, B. C. Gibson, S. Trpkovski, F. M. Hossain, S. T. Huntington, K. Ganesan, L. C. Hollenberg, and S. Prawer, “Nano-manipulation of diamond-based single photon sources,” Opt. Express 17, 11287–11293 (2009). [CrossRef] [PubMed]
24.	T. Schroder, A. W. Schell, G. Kewes, T. Aichele, and O. Benson, “Fiber-integrated diamond-based single photon source,” Nano Lett. 11, 198–202 (2011). [CrossRef]
25.	I. Aharonovich, A. D. Greentree, and S. Prawer, “Diamond photonics,” Nat. Photonics 5, 397–405 (2011). [CrossRef]
26.	M. R. Oermann, H. Ebendorff-Heidepriem, Y. Li, T.-C. Foo, and T. M. Monro, “Index matching between passive and active tellurite glasses for use in microstructured fiber lasers: erbium doped lanthanum-tellurite glass,” Opt. Express 17, 15578–15584 (2009). [CrossRef] [PubMed]
27.	T. M. Monro, S. Warren-Smith, E. P. Schartner, A. François, S. Heng, H. Ebendorff-Heidepriem, and S. Afshar V., “Sensing with suspended-core optical fibers,” Opt. Fiber Technol. 16, 343–356 (2010). [CrossRef]
28.	A. Snyder and J. Love, Optical Waveguide Theory (Springer, 1983).
29.	A. F. Oskooi, D. Roundy, M. Ibanescu, P. Bermel, J. D. Joannopoulos, and S. G. Johnson, “MEEP: a flexible free-software package for electromagnetic simulations by the FDTD method,” Comput. Phys. Commun. 181, 687–702 (2010). [CrossRef]

OCIS Codes
(060.0060) Fiber optics and optical communications : Fiber optics and optical communications
(270.0270) Quantum optics : Quantum optics

ToC Category:
Fiber Optics and Optical Communications

History
Original Manuscript: May 23, 2011
Revised Manuscript: July 11, 2011
Manuscript Accepted: July 13, 2011
Published: August 9, 2011

Citation
Matthew R. Henderson, Shahraam Afshar V., Andrew D. Greentree, and Tanya M. Monro, "Dipole emitters in fiber: interface effects, collection efficiency and optimization," Opt. Express 19, 16182-16194 (2011)
http://www.opticsinfobase.org/oe/abstract.cfm?URI=oe-19-17-16182

Sort: Author | Year | Journal | Reset

References

I. Aharonovich, S. Castelletto, D. A. Simpson, C.-H. Su, A. D. Greentree, and S. Prawer, “Diamond based single photon emitters,” Rep. Prog. Phys. 74, 076501 (2011). [CrossRef]
S. Afshar V., S. C. Warren-Smith, and T. M. Monro, “Enhancement of fluorescence-based sensing using microstructured optical fibres,” Opt. Express 15, 17891–17901 (2007). [CrossRef]
E. M. Purcell, “Spontaneous emission probabilities at radio frequencies,” Phys. Rev. 69, 681 (1946).
W. Żakowicz and M. Janowicz, “Spontaneous emission in the presence of a dielectric cylinder,” Phys. Rev. A 62, 013820 (2000). [CrossRef]
T. Søndergaard and B. Tromborg, “General theory for spontaneous emission in active dielectric microstructures: example of a fiber amplifier,” Phys. Rev. A 64, 033812 (2001). [CrossRef]
J.-P. Hermier, M. Dahan, X. Brokmann, and L. Coolen, “Emission properties of single CdSe/ZnS quantum dots close to a dielectric interface,” Chem. Phys. 318, 91–98 (2005). [CrossRef]
P. Anger, P. Bharadwaj, and L. Novotny, “Enhancement and quenching of single-molecule fluorescence,” Phys. Rev. Lett. 96, 113002 (2006). [CrossRef] [PubMed]
I.-K. Hwang, S.-K. Kim, J.-K. Yang, S.-H. Kim, S. H. Lee, and Y.-H. Lee, “Curved-microfiber photon coupling for photonic crystal light emitter,” Appl. Phys. Lett. 87, 131107 (2005). [CrossRef]
K.-M. C. Fu, P. E. Barclay, C. Santori, A. Faraon, and R. G. Beausoleil, “Low-temperature tapered-fiber probing of diamond nitrogen-vacancy ensembles coupled to GaP microcavities,” New J. Phys. 13, 055023 (2011). [CrossRef]
D. D. Awschalom, R. Epstein, and R. Hanson, “The diamond age of spintronics,” Sci. Am. 297, 84–91 (2007). [CrossRef] [PubMed]
H. Benisty, H. De Neve, and C. Weisbuch, “Impact of planar microcavity effects on light extraction — part I: basic concepts and analytical trends,” IEEE J. Quantum Electron. 34, 1612–1631 (1998). [CrossRef]
M. R. Henderson, B. C. Gibson, H. Ebendorff-Heidepriem, K. Kuan, S. Afshar V., J. O. Orwa, I. Aharonovich, S. Tomljenovic-Hanic, A. D. Greentree, S. Prawer, and T. M. Monro, “Diamond in tellurite glass: a new medium for quantum information,” Adv. Mater. 23, 2806–2810 (2011). [CrossRef] [PubMed]
T. M. Babinec, B. J. M. Hausmann, M. Khan, Y. Zhang, J. R. Maze, P. R. Hemmer, and M. Loncar, “A diamond nanowire single-photon source,” Nat. Nanotechnol. 5, 195–199 (2010). [CrossRef] [PubMed]
A. Faraon, P. E. Barclay, C. Santori, K.-M. C. Fu, and R. G. Beausoleil, “Resonant enhancement of the zero-phonon emission from a colour centre in a diamond cavity,” Nat. Photonics 5, 301–305 (2011). [CrossRef]
P. Siyushev, F. Kaiser, V. Jacques, I. Gerhardt, S. Bischof, H. Fedder, J. Dodson, M. Markham, D. Twitchen, F. Jelezko, and J. Wrachtrup, “Monolithic diamond optics for single photon detection,” Appl. Phys. Lett. 97, 241902 (2010). [CrossRef]
T. Schröder, F. Gädeke, M. J. Banholzer, and O. Benson, “Ultra-bright and efficient single photon generation based on n-v centres in nanodiamonds on a solid immersion lens,” New J. Phys. 13, 055017 (2011). [CrossRef]
L. Marseglia, J. P. Hadden, A. C. Stanley-Clarke, J. P. Harrison, B. Patton, Y.-L. D. Ho, B. Naydenov, F. Jelezko, J. Meijer, P. R. Dolan, J. M. Smith, J. G. Rarity, and J. L. O’Brien, “Nano-fabricated solid immersion lenses registered to single emitters in diamond,” Appl. Phys. Lett. 98, 189902 (2011).
P. E. Barclay, C. Santori, K.-M. Fu, R. G. Beausoleil, and O. Painter, “Coherent interference effects in a nano-assembled diamond NV center cavity-QED system,” Opt. Express 17, 8081–8097 (2009). [CrossRef] [PubMed]
D. Englund, B. Shields, K. Rivoire, F. Hatami, J. Vučković, H. Park, and M. D. Lukin, “Deterministic coupling of a single nitrogen vacancy center to a photonic crystal cavity,” Nano Lett. 10, 3922–3926 (2010). [CrossRef] [PubMed]
Y.-S. Park, A. K. Cook, and H. Wang, “Cavity QED with diamond nanocrystals and silica microspheres,” Nano Lett. 6, 2075–2079 (2006). [CrossRef] [PubMed]
J. Rabeau, S. Huntington, A. Greentree, and S. Prawer, “Diamond chemical-vapor deposition on optical fibers for fluorescence waveguiding,” Appl. Phys. Lett. 86, 134104 (2005). [CrossRef]
S. Kuhn, C. Hettich, C. Schmitt, J. Poizat, and V. Sandoghdar, “Diamond colour centres as a nanoscopic light source for scanning near-field optical microscopy,” J. Microsc. 202, 2–6 (2001). [CrossRef] [PubMed]
E. Ampem-Lassen, D. A. Simpson, B. C. Gibson, S. Trpkovski, F. M. Hossain, S. T. Huntington, K. Ganesan, L. C. Hollenberg, and S. Prawer, “Nano-manipulation of diamond-based single photon sources,” Opt. Express 17, 11287–11293 (2009). [CrossRef] [PubMed]
T. Schroder, A. W. Schell, G. Kewes, T. Aichele, and O. Benson, “Fiber-integrated diamond-based single photon source,” Nano Lett. 11, 198–202 (2011). [CrossRef]
I. Aharonovich, A. D. Greentree, and S. Prawer, “Diamond photonics,” Nat. Photonics 5, 397–405 (2011). [CrossRef]
M. R. Oermann, H. Ebendorff-Heidepriem, Y. Li, T.-C. Foo, and T. M. Monro, “Index matching between passive and active tellurite glasses for use in microstructured fiber lasers: erbium doped lanthanum-tellurite glass,” Opt. Express 17, 15578–15584 (2009). [CrossRef] [PubMed]
T. M. Monro, S. Warren-Smith, E. P. Schartner, A. François, S. Heng, H. Ebendorff-Heidepriem, and S. Afshar V., “Sensing with suspended-core optical fibers,” Opt. Fiber Technol. 16, 343–356 (2010). [CrossRef]
A. Snyder and J. Love, Optical Waveguide Theory (Springer, 1983).
A. F. Oskooi, D. Roundy, M. Ibanescu, P. Bermel, J. D. Joannopoulos, and S. G. Johnson, “MEEP: a flexible free-software package for electromagnetic simulations by the FDTD method,” Comput. Phys. Commun. 181, 687–702 (2010). [CrossRef]

Afshar V., S.
Aharonovich, I.
Aichele, T.
Ampem-Lassen, E.
Anger, P.
Awschalom, D. D.
Babinec, T. M.
Banholzer, M. J.
Barclay, P. E.
Beausoleil, R. G.
Benisty, H.
Benson, O.
Bermel, P.
Bharadwaj, P.
Bischof, S.
Brokmann, X.
Castelletto, S.
Cook, A. K.
Coolen, L.
Dahan, M.
De Neve, H.
Dodson, J.
Dolan, P. R.
Ebendorff-Heidepriem, H.
Englund, D.
Epstein, R.
Faraon, A.
Fedder, H.
Foo, T.-C.
François, A.
Fu, K.-M.
Fu, K.-M. C.
Gädeke, F.
Ganesan, K.
Gerhardt, I.
Gibson, B. C.
Greentree, A.
Greentree, A. D.
Hadden, J. P.
Hanson, R.
Harrison, J. P.
Hatami, F.
Hausmann, B. J. M.
Hemmer, P. R.
Henderson, M. R.
Heng, S.
Hermier, J.-P.
Hettich, C.
Ho, Y.-L. D.
Hollenberg, L. C.
Hossain, F. M.
Huntington, S.
Huntington, S. T.
Hwang, I.-K.
Ibanescu, M.
Jacques, V.
Janowicz, M.
Jelezko, F.
Joannopoulos, J. D.
Johnson, S. G.
Kaiser, F.
Kewes, G.
Khan, M.
Kim, S.-H.
Kim, S.-K.
Kuan, K.
Kuhn, S.
Lee, S. H.
Lee, Y.-H.
Li, Y.
Loncar, M.
Love, J.
Lukin, M. D.
Markham, M.
Marseglia, L.
Maze, J. R.
Meijer, J.
Monro, T. M.
Naydenov, B.
Novotny, L.
O’Brien, J. L.
Oermann, M. R.
Orwa, J. O.
Oskooi, A. F.
Painter, O.
Park, H.
Park, Y.-S.
Patton, B.
Poizat, J.
Prawer, S.
Purcell, E. M.
Rabeau, J.
Rarity, J. G.
Rivoire, K.
Roundy, D.
Sandoghdar, V.
Santori, C.
Schartner, E. P.
Schell, A. W.
Schmitt, C.
Schroder, T.
Schröder, T.
Shields, B.
Simpson, D. A.
Siyushev, P.
Smith, J. M.
Snyder, A.
Søndergaard, T.
Stanley-Clarke, A. C.
Su, C.-H.
Tomljenovic-Hanic, S.
Tromborg, B.
Trpkovski, S.
Twitchen, D.
Vuckovic, J.
Wang, H.
Warren-Smith, S.
Warren-Smith, S. C.
Weisbuch, C.
Wrachtrup, J.
Yang, J.-K.
Zakowicz, W.
Zhang, Y.

Adv. Mater.

M. R. Henderson, B. C. Gibson, H. Ebendorff-Heidepriem, K. Kuan, S. Afshar V., J. O. Orwa, I. Aharonovich, S. Tomljenovic-Hanic, A. D. Greentree, S. Prawer, and T. M. Monro, “Diamond in tellurite glass: a new medium for quantum information,” Adv. Mater. 23, 2806–2810 (2011). [CrossRef] [PubMed]

Appl. Phys. Lett.

P. Siyushev, F. Kaiser, V. Jacques, I. Gerhardt, S. Bischof, H. Fedder, J. Dodson, M. Markham, D. Twitchen, F. Jelezko, and J. Wrachtrup, “Monolithic diamond optics for single photon detection,” Appl. Phys. Lett. 97, 241902 (2010). [CrossRef]
L. Marseglia, J. P. Hadden, A. C. Stanley-Clarke, J. P. Harrison, B. Patton, Y.-L. D. Ho, B. Naydenov, F. Jelezko, J. Meijer, P. R. Dolan, J. M. Smith, J. G. Rarity, and J. L. O’Brien, “Nano-fabricated solid immersion lenses registered to single emitters in diamond,” Appl. Phys. Lett. 98, 189902 (2011).
I.-K. Hwang, S.-K. Kim, J.-K. Yang, S.-H. Kim, S. H. Lee, and Y.-H. Lee, “Curved-microfiber photon coupling for photonic crystal light emitter,” Appl. Phys. Lett. 87, 131107 (2005). [CrossRef]
J. Rabeau, S. Huntington, A. Greentree, and S. Prawer, “Diamond chemical-vapor deposition on optical fibers for fluorescence waveguiding,” Appl. Phys. Lett. 86, 134104 (2005). [CrossRef]

Chem. Phys.

J.-P. Hermier, M. Dahan, X. Brokmann, and L. Coolen, “Emission properties of single CdSe/ZnS quantum dots close to a dielectric interface,” Chem. Phys. 318, 91–98 (2005). [CrossRef]

Comput. Phys. Commun.

A. F. Oskooi, D. Roundy, M. Ibanescu, P. Bermel, J. D. Joannopoulos, and S. G. Johnson, “MEEP: a flexible free-software package for electromagnetic simulations by the FDTD method,” Comput. Phys. Commun. 181, 687–702 (2010). [CrossRef]

IEEE J. Quantum Electron.

H. Benisty, H. De Neve, and C. Weisbuch, “Impact of planar microcavity effects on light extraction — part I: basic concepts and analytical trends,” IEEE J. Quantum Electron. 34, 1612–1631 (1998). [CrossRef]

J. Microsc.

S. Kuhn, C. Hettich, C. Schmitt, J. Poizat, and V. Sandoghdar, “Diamond colour centres as a nanoscopic light source for scanning near-field optical microscopy,” J. Microsc. 202, 2–6 (2001). [CrossRef] [PubMed]

Nano Lett.

D. Englund, B. Shields, K. Rivoire, F. Hatami, J. Vučković, H. Park, and M. D. Lukin, “Deterministic coupling of a single nitrogen vacancy center to a photonic crystal cavity,” Nano Lett. 10, 3922–3926 (2010). [CrossRef] [PubMed]
Y.-S. Park, A. K. Cook, and H. Wang, “Cavity QED with diamond nanocrystals and silica microspheres,” Nano Lett. 6, 2075–2079 (2006). [CrossRef] [PubMed]
T. Schroder, A. W. Schell, G. Kewes, T. Aichele, and O. Benson, “Fiber-integrated diamond-based single photon source,” Nano Lett. 11, 198–202 (2011). [CrossRef]

Nat. Nanotechnol.

T. M. Babinec, B. J. M. Hausmann, M. Khan, Y. Zhang, J. R. Maze, P. R. Hemmer, and M. Loncar, “A diamond nanowire single-photon source,” Nat. Nanotechnol. 5, 195–199 (2010). [CrossRef] [PubMed]

Nat. Photonics

A. Faraon, P. E. Barclay, C. Santori, K.-M. C. Fu, and R. G. Beausoleil, “Resonant enhancement of the zero-phonon emission from a colour centre in a diamond cavity,” Nat. Photonics 5, 301–305 (2011). [CrossRef]
I. Aharonovich, A. D. Greentree, and S. Prawer, “Diamond photonics,” Nat. Photonics 5, 397–405 (2011). [CrossRef]

New J. Phys.

T. Schröder, F. Gädeke, M. J. Banholzer, and O. Benson, “Ultra-bright and efficient single photon generation based on n-v centres in nanodiamonds on a solid immersion lens,” New J. Phys. 13, 055017 (2011). [CrossRef]
K.-M. C. Fu, P. E. Barclay, C. Santori, A. Faraon, and R. G. Beausoleil, “Low-temperature tapered-fiber probing of diamond nitrogen-vacancy ensembles coupled to GaP microcavities,” New J. Phys. 13, 055023 (2011). [CrossRef]

Opt. Express

Opt. Fiber Technol.

T. M. Monro, S. Warren-Smith, E. P. Schartner, A. François, S. Heng, H. Ebendorff-Heidepriem, and S. Afshar V., “Sensing with suspended-core optical fibers,” Opt. Fiber Technol. 16, 343–356 (2010). [CrossRef]

Phys. Rev.

E. M. Purcell, “Spontaneous emission probabilities at radio frequencies,” Phys. Rev. 69, 681 (1946).

Phys. Rev. A

W. Żakowicz and M. Janowicz, “Spontaneous emission in the presence of a dielectric cylinder,” Phys. Rev. A 62, 013820 (2000). [CrossRef]
T. Søndergaard and B. Tromborg, “General theory for spontaneous emission in active dielectric microstructures: example of a fiber amplifier,” Phys. Rev. A 64, 033812 (2001). [CrossRef]

Phys. Rev. Lett.

P. Anger, P. Bharadwaj, and L. Novotny, “Enhancement and quenching of single-molecule fluorescence,” Phys. Rev. Lett. 96, 113002 (2006). [CrossRef] [PubMed]

Rep. Prog. Phys.

I. Aharonovich, S. Castelletto, D. A. Simpson, C.-H. Su, A. D. Greentree, and S. Prawer, “Diamond based single photon emitters,” Rep. Prog. Phys. 74, 076501 (2011). [CrossRef]

Sci. Am.

D. D. Awschalom, R. Epstein, and R. Hanson, “The diamond age of spintronics,” Sci. Am. 297, 84–91 (2007). [CrossRef] [PubMed]

Other

A. Snyder and J. Love, Optical Waveguide Theory (Springer, 1983).

Cited By

Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.

Click here to see a list of articles that cite this paper