OSA's Digital Library

Optics Express

Optics Express

  • Editor: C. Martijn de Sterke
  • Vol. 20, Iss. 13 — Jun. 18, 2012
  • pp: 14064–14074

Optics InfoBase > Optics Express > Volume 20 > Issue 13 > Page 14064

« Show journal navigation

Helical mode conversion using conical reflector

H. Kobayashi, K. Nonaka, and M. Kitano  »View Author Affiliations


Optics Express, Vol. 20, Issue 13, pp. 14064-14074 (2012)
http://dx.doi.org/10.1364/OE.20.014064


View Full Text Article

Acrobat PDF (1027 KB)


Advanced Search

Browse Journals / Lookup Meetings

Browse by Journal and Year


   


Lookup Conference Papers

Close Browse Journals / Lookup Meetings

Article Tools

Share
Citations

Abstract

In a recent paper, Mansuripur et al. indicated and numerically verified the generation of the helical wavefront of optical beams using a conical-shape reflector. Because the optical reflection is largely free from chromatic aberrations, the conical reflector has an advantage of being able to manipulate the helical wavefront with broadband light such as white light or short light pulses. In this study, we introduce geometrical understanding of the function of the conical reflector using the spatially-dependent geometric phase, or more specifically, the spin redirection phase. We also present a theoretical analysis based on three-dimensional matrix calculus and elucidate relationships of the spin, orbital, and total angular momenta between input and output beams. These analyses are very useful when designing other optical devices that utilize spatially-dependent spin redirection phases. Moreover, we experimentally demonstrate the generation of helical beams from an ordinary Gaussian beam using a metallic conical-shape reflector.

© 2012 OSA

1. Introduction

When a physical system evolves along a path in parameter space and returns to the initial state, its wavefunction acquires an additional phase factor that depends solely upon the path traced in parameter space. This phase factor, called the geometric phase, was first set out by Berry [1

M. V. Berry, “Quantal phase factors accompanying adiabatic changes,” Proc. R. Soc. London A 392, 45–57 (1984). [CrossRef]

]. There have been many manifestations of geometric phase in a variety of physical systems [2

A. Shapere and F. Wilczek, eds., Geometric Phases in Physics (World Scientific, Singapore, 1989).

]. In optics, there are two primarily types of geometric phase: one is the spin-redirection phase, which is induced by cyclic changes in the propagation direction of a light beam [3

R. Y. Chiao and Y.-S. Wu, “Manifestations of Berry’s topological phase for the photon,” Phys. Rev. Lett. 57, 933–936 (1986). [CrossRef] [PubMed]

–10

E. J. Galvez and C. D. Holmes, “Geometric phase of optical rotators,” J. Opt. Soc. Am. A 16, 1981–1985 (1999). [CrossRef]

]. The other is the Pancharatnam-Berry phase, which is associated with cyclic changes of polarization [11

S. Pancharatnam, “Generalized theory of interference, and its applications,” Proc. Ind. Acad. Sci. A 44, 247–262 (1956).

, 12

M. V. Berry, “The adiabatic phase and Pancharatnam’s phase for polarized light,” J. Mod. Opt. 34, 1401–1407 (1987). [CrossRef]

].

In the course of studies on geometric phases, it has been shown that if a light wave is subjected to a transversely inhomogeneous state change with uniform initial and final states, the associated spatially-dependent geometric phases induce wavefront reshaping [13

R. Bhandari, “Polarization of light and topological phases,” Phys. Rep. 281, 1–64 (1997). [CrossRef]

, 14

Z. Bomzon, G. Biener, V. Kleiner, and E. Hasman, “Space-variant pancharatnam-berry phase optical elements with computer-generated subwavelengths graings,” Opt. Lett. 27, 1141–1143 (2002). [CrossRef]

]. This method of wavefront reshaping is fundamentally different from that in typical optical devices, which utilize the optical path difference, e.g., standard lenses and curved mirrors. Whereas the conventional methods suffer from chromatic aberrations, approaches based on geometric phases have the advantage of being able to realize achromatic optical devices, because the phase shift depends only upon the path in state space, and not upon wavelength.

One important application of spatially-dependent geometric phase is the generation and mode conversion of light beams with an optical vortex or helical beams. A beam is characterized by an integer l, called the helical mode number. Its wavefront is composed of |l| intertwined helical wavefronts, with a handedness given by the sign of l (e.g., Fig. 1 shows the equiphase surface of the helical beam with l = +1). It has been shown that each photon in the helical mode carries a quantized intrinsic orbital angular momentum lh̄, in addition to the spin-like angular momentum ±h̄ associated with circularly polarized waves [15

L. Allen, M. W. Beijersbergen, R. J. C. Spreeuw, and J. P. Woerdman, “Orbital angular momentum of light and the transformation of Laguerre-Gaussian laser modes,” Phys. Rev. A 45, 8185–8189 (1992). [CrossRef] [PubMed]

]. Recently, helical beams have attracted growing interest, owing to their possible use in optical trapping and manipulation of particles and atoms [16

H. He, M. E. J. Friese, N. R. Heckenberg, and H. Rubinsztein-Dunlop, “Direct observation of transfer of angular momentum to absorptive particles from a laser beam with a phase singularity,” Phys. Rev. Lett. 75, 826–829 (1995). [CrossRef] [PubMed]

], multi-state information encoding for optical communication, and quantum computation [17

A. Mair, A. Vaziri, G. Weihs, and A. Zeilinger, “Entanglement of the orbital angular momentum states of photons,” Nature 412, 313–316 (2001). [CrossRef] [PubMed]

].

Fig. 1 Equiphase surface of helical beam with l = +1 propagating along z-axis.

In recent years, a specially manufactured half-wave plate called “q-plate” has been used for the manipulation of helical beams [18

L. Marrucci, C. Manzo, and D. Paparo, “Optical spin-to-orbital angular momentum conversion in inhomogeneous anisotropic media,” Phys. Rev. Lett. 96, 163905 (2006). [CrossRef] [PubMed]

]. When a circularly polarized Gaussian beam is sent through a q-plate, the polarization state evolves along a path on the Poincaré sphere that depends upon the azimuthal angle of the transversal plane and eventually becomes uniform but opposite circular polarization, as a result of half-wave retardation. Because of the associated Pancharatnam-Berry phase with the above-described state evolution, the output light beam no longer remains Gaussian, but becomes, instead, a helical beam. Unfortunately, the q-plate will only operate in the above-described way at given wavelength, because the birefringent retardation must correspond to exactly one half of the wavelength.

More recently, Mansuripur and his colleagues proposed a new method of helical mode conversion utilizing the spatially-dependent spin redirection phase [19

M. Mansuripur, A. R. Zakharian, and E. M. Wright, “Spin and orbital angular momenta of light reflected from a cone,” Phys. Rev. A 84, 033813 (2011). [CrossRef]

]. Using Maxwell-equation-based simulation, they showed the helical mode generation from an ordinary Gaussian beam can be performed using a conical-shape reflector due to spin-to-orbital angular momentum conversion. They also introduced a simplified analysis based on the Jones calculus to elucidate the physics underlying the reflection properties [20

M. Mansuripur, A. R. Zakharian, and E. M. Wright, “Spin-to-orbital angular momentum exchange via reflection from a cone,” Proc. SPIE 8097, 809716 (2011). [CrossRef]

]. Because the optical reflection is largely free from chromatic aberrations, the conical reflector has the advantage of being able to manipulate the helical wavefront with broadband light such as white light or short light pulses.

In this paper, we take Mansuripur’s analysis of the conical reflector one step further. We consider that the general helical beam, not the ordinary Gaussian beam, is incident on the conical reflector, and elucidate the relationship of spin, orbital, and total angular momenta between input and output beams based on the three-dimensional matrix calculus. We also explicitly introduce the geometrical analysis using the spatially-dependent spin redirection phases, which is implied in Ref. [19

M. Mansuripur, A. R. Zakharian, and E. M. Wright, “Spin and orbital angular momenta of light reflected from a cone,” Phys. Rev. A 84, 033813 (2011). [CrossRef]

]. These analyses are very useful when designing other optical devices that utilize spatially-dependent spin redirection phases. Moreover, we design a metallic conical-shape reflector, and demonstrate helical mode generation from an ordinary Gaussian beam. To the best of our knowledge, this is the first experimental demonstration of the spin-to-orbital angular momentum conversion using the conical reflector.

The remainder of this paper is organized as follows. In Sec. 2, we present a theoretical analysis of helical mode conversion using a conical reflector based on the well-known matrix formula. Then, we study the principle of operation from the viewpoint of the geometric phase or the spin redirection phase. In Sec. 3, we describe our experimental setup and results regarding helical mode conversion with the conical reflector. Conclusions are presented in Sec. 4.

2. Theoretical analysis of helical mode conversion using conical reflector

In this section, we describe the characteristics of helical beams and present a theoretical introduction to helical mode conversion using a conical reflector. Initially, we calculate its function using the well-known matrix formula. Then, we show a geometrical interpretation which utilizes the spin redirection geometric phase.

In what follows, we assume that all the reflectors have infinite conductivity, which results in equal phase shifts for the S and P components of the polarization, and that the propagation and reflection losses are negligible.

2.1. Helical beam and optical angular momentum

In the paraxial approximation, a monochromatic helical wave with circular polarization propagated along the z-axis is given by the wave vector k = k(0, 0, κ)T, and the electric field vector E:
E ( x,t) = E˜l(r) e i ( k⋅x−ωt) e±+c.c. = E0(r) e iκ ( lϕ+kz) e −iωt e±+c.c.,
(1)
where k is the wavenumber, κ represents the sign of the propagation direction (κ = ±1 corresponds to the ±z direction), x ≡ (x,y,z), r ≡ (x,y), r and ϕ are the polar coordinates in the x–y plane, the integer l represents the helical mode number, and the unit complex vectors e±= ( 1,±i,0)T/ 2 represent the circular polarizations. The helicity σ is calculated using Eq. (1) as ±κ (see Appendix A).

With certain choices of radial profile, Eq. (1) corresponds to the well-known Laguerre-Gaussian modes. The intensity and phase profiles of this mode are shown in Fig. 2(a) and 2(b), respectively. The phase profile, as shown in Fig. 2(b), can not be measured directly, however, we can observe the phase profile via the interferogram between the helical beam and a spherical wave [see Fig. 2(c)]. For non-helical waves (l = 0), the resulting interferogram consists of concentric circular fringes. For helical waves, however, the interferogram takes the form of spirals (double spiral in the case of |l| = 2), with a handedness that depends upon the sign of the helical mode: clockwise (counterclockwise) outgoing spirals correspond to a positive (negative) mode number.

Fig. 2 Transverse profile of fundamental Gaussian beam (l = 0) and Laguerre Gaussian beam with l = ±2. (a) Intensity profile. (b) Phase profile. (c) Interferogram with a spherical wave.

In addition to the spin angular momentum σh̄ along the propagation direction per photon, the light beam of Eq. (1) carries an orbital angular momentum lh̄ per photon [15

L. Allen, M. W. Beijersbergen, R. J. C. Spreeuw, and J. P. Woerdman, “Orbital angular momentum of light and the transformation of Laguerre-Gaussian laser modes,” Phys. Rev. A 45, 8185–8189 (1992). [CrossRef] [PubMed]

]. The total angular momentum along the z-axis, Jz, can be represented by
Jz = LZ, Sz = h¯κ(l+σ),
(2)
where Lz and Sz are the z component of the orbital and spin angular momentum, respectively.

2.2. Reflection matrix of conical reflector and helical mode conversion

Let us consider the reflection of a monochromatic plane wave with wave vector k from a perfect mirror M, which can be characterized by a unit vector m normal to its surface. The function of the reflection, identified by a matrix ℳ, can be represented by the rotation of the angle π around vector m followed by inversion (parity transformation) as follows:
ℳ=−ℛ ( π,m)=ℐ−2m mT,
(3)
where ℛ(θ, a) is the matrix for the rotation of θ in the right-handed sense about an axis a, ℐ is the unit matrix, and mT is the transpose of vector m [7

T. F. Jordan, “Quantum phases from reflections,” Phys. Rev. Lett. 60, 1584–1584 (1988). [CrossRef] [PubMed]

,9

M. Segev, R. Solomon, and A. Yariv, “Manifestation of Berry’s phase in image-bearing optical beams,” Phys. Rev. Lett. 69, 590–592 (1992). [CrossRef] [PubMed]

]. More generally, because the rotation matrix ℛ is a member of SO(3), a sequence of N reflections with individual reflection matrices ℳi (i = 1, ··· ,N) can be represented by a single rotation matrix as follows:
ℳ= ∑ i=1N ℳi= ( −1)Nℛ ( θT, aT),
(4)
where θT is the equivalent angle of rotation around an axis aT.

First, we calculate the reflection matrix of a two dimensional (dihedral) corner reflector that consists of two mutually perpendicular mirrors, MA and MB with normal vectors mA= ( 0,−1,−1)T/ 2 and mB= ( 0,1,−1)T/ 2, respectively [see Fig. 3(a)]. The reflection matrix ℳ0 for the dihedral corner reflector is given by
ℳ0= ℳB ℳA= ℳA ℳB= ( 1 0 0 0 −1 0 0 0 −1),
(5)
which corresponds to the π rotation around the x-axis.

Fig. 3 (a) Two-dimensional (dihedral) corner reflector. Two perfect mirrors, MA and MB, constituting the corner reflector are represented by the vectors normal to their surfaces, mA and mB, respectively. (b) Conical reflector. This reflector is made as the solid of revolution generated by the rotation of the dihedral corner reflector around z-axis.

Next, we consider a conical reflector, which is a solid of revolution generated by the rotation of a dihedral corner reflector around the z-axis, as shown in Fig. 3(b). The axial-symmetric parallel light beam enters along the z-axis and is reflected on the reflector. If the beam diameter is large enough relative to the wavelength, the incident beam can be considered as a bundle of rays. Each ray, which is parallel to the z-axis, can be labeled by r = (x,y). The polarization vector can be assigned to the incident ray in the form of the transverse electric field vector Ẽin(r). Similarly, the output polarization carried by the ray can be represented by Ẽout(r). The diameter of each ray is assumed to be still much larger than the wavelength, and the diffraction associated with propagation can be neglected. Thus, the effect of the conical reflector can be analyzed on a ray-by-ray basis.

For an incident ray at r = (x,y), the conical reflector can be replaced by a tangential dihedral corner reflector that is obtained by the rotation of M0 about the z-axis by ϕ = tan−1(y/x). Thus, the input ray is transformed according to the reflection matrix
ℳ CR(ϕ) = ℛ ( −ϕ, ez) ℳ0ℛ ( ϕ, ez) = ( cos2ϕ sin2ϕ 0 sin2ϕ −cos2ϕ 0 0 0 −1),
(6)
which corresponds to the rotation of π around the vector n = (cosϕ, sinϕ, 0). Moreover, the input ray at r is relocated to the transverse position −r. Therefore, the relationship between the input ray and the output ray is given by
E˜ out(−r)= ℳ CR(ϕ) E˜ in(r).
(7)

Next, we consider a helical wave with a mode number l and a circular polarization (σ = ±1) propagating in the −z direction that is incident on the conical reflector. The input field can be represented by
E in(x,t) = E˜ in(r) e −i ( kz+ωt)+c.c. = E0(r) e −i ( lϕ+kz+ωt) e∓+c.c.,
(8)
where the unit complex vectors e− and e+ correspond to the right (σ = +1) and the left (σ = −1) circular polarization, respectively.

From Eqs. (7) and (8), the output field from the conical reflector is
E out ( x,t) = e −i2σϕ E˜ in(−r) e i ( kz−ωt)+c.c. = E0(r) e i [ −(l+2σ)ϕ+kz−ωt] e±+c.c. = E˜ −l−2σ(x) e −iωt e±+c.c.
(9)
From this equation, we see that the output wave is uniformly circularly polarized (σ = ±1); however, its wavefront has acquired a nonuniform phase factor −2σϕ that depends upon the input helicity. Because the conical reflector inverts the wave vector, kout = −kin, the output helicity is conserved and the input helical mode number l is converted to −l − 2σ.

In the above calculations, we assume that the vertex angle of the conical reflector is precisely 90°. Under the condition that the incident light beam is parallel to the rotational symmetric axis of the conical reflector, our matrix analysis is also applicable even if the vertex angle is not precisely 90°. From this calculation, we can confirm that small imperfection of the vertex angle has an impact on the phase distribution in x–y plane only as a second order term. We can also neglect the effect of small misalignment of incident beam axis.

From Eqs. (8) and (9), the relationship between the z components of the input and output angular momentum can be calculated as
Sz out=− Sz in,
(10)
Lz out= Lz in+2 Sz in,
(11)
Jz out= Jz in,
(12)
where the superscripts “in” and “out” denote the input and output (Fig. 4 illustrates the above relationships). Equation (12) shows that the z component of total angular momentum is conserved under reflection and that no angular momentum is transferred from the incident light field to the conical reflector. Thus, the conical reflector acts only as a “catalyst” for the interconversion between spin and orbital angular momenta. This result agrees well with those of previous studies, which indicate that an axially symmetric perfect electrical conductor cannot acquire any angular momentum along its axis of symmetry [19

M. Mansuripur, A. R. Zakharian, and E. M. Wright, “Spin and orbital angular momenta of light reflected from a cone,” Phys. Rev. A 84, 033813 (2011). [CrossRef]

, 21

C. Konz and G. Benford, “Geometric absorption of electromagnetic angular momentum,” Opt. Comm. 226, 249–254 (2003). [CrossRef]

, 22

T. A. Nieminen, “Comment on Geometric absorption of electromagnetic angular momentum,” Opt. Comm. 235, 227–229 (2004). [CrossRef]

].

Fig. 4 The relationship between input and output angular momentum vectors. Sz = Szez, Lz = Lzez, and Jz = Jzez represent z components of the spin, orbital, and total angular momentum vectors, respectively.

2.3. Geometrical understanding of helical mode conversion using conical reflector

The spatially-dependent phase factor discussed in the previous section is not induced by the optical path length difference. In fact, if the light wave is incident along the z-axis, all optical paths under reflection from the conical reflector are obviously the same. Instead, we have utilized the so-called spin redirection phase, which is one of the manifestation of the geometric phase. Its magnitude depends only upon the trajectory of the state vector traced in state space. In the case of optical systems in which the light propagates along a three-dimensional path, the state vector is the helicity vector with unit length and the state space is the spherical surface pointed by the helicity vector (further information regarding the helicity and the helicity vector is presented in Appendix A).

When the helicity vector is gradually changed as in the case of propagation through a helically-wound optical fiber [3

R. Y. Chiao and Y.-S. Wu, “Manifestations of Berry’s topological phase for the photon,” Phys. Rev. Lett. 57, 933–936 (1986). [CrossRef] [PubMed]

, 5

A. Tomita and R. Y. Chiao, “Observation of Berry’s topological phase by use of an optical fiber,” Phys. Rev. Lett. 57, 937–940 (1986). [CrossRef] [PubMed]

], the helicity is conserved and the temporal change of the helicity vector can be represented by
σ(t)= σk(t)k.
(13)
The geometric phase is proportional to the surface area of the sphere enclosed by the closed path σ(t), where σ(T) = σ(0).

In an optical system in which the light is reflected by perfect mirrors, however, the helicity is inverted after each reflection [see Eq. (4)]. The helicity vector after n reflections can be represented as follows:
σn= σn knk= ( −1)n σ0 knk,
(14)
where σn and kn are the helicity vector and the wave vector after the n-th reflection. Thus, we consider modified k vectors as a state vector defined by
k˜n= ( −1)n knk.
(15)
If we measure the helicity of the photon with respect to k̃ vectors, it is conserved under perfect reflections, as in the case of gradual change [6

M. Kitano, T. Yabuzaki, and T. Ogawa, “Comment on Observation of Berry’s topological phase by use of an optical fiber,” Phys. Rev. Lett. 58, 523–523 (1987). [CrossRef] [PubMed]

, 9

M. Segev, R. Solomon, and A. Yariv, “Manifestation of Berry’s phase in image-bearing optical beams,” Phys. Rev. Lett. 69, 590–592 (1992). [CrossRef] [PubMed]

, 10

E. J. Galvez and C. D. Holmes, “Geometric phase of optical rotators,” J. Opt. Soc. Am. A 16, 1981–1985 (1999). [CrossRef]

].

The spin redirection phase γ is proportional to the area Ω enclosed by the path formed by discrete points on the k̃-sphere connected by geodesics:
γ=−σΩ.
(16)
The sign of this phase will depend upon the helicity of the light spin.

Figure 5 shows the wave vectors kn and the modified wave vectors k̃n of a beam that undergoes two reflections on the conical reflector. The input beam propagating along the z-axis is subjected to two perfect reflections, and finally, its direction is inverted; k0 = −k2. The wave vector k1(ϕ) in the middle of the two reflections, however, depends upon the azimuthal angle ϕ in the x–y plane, i.e., the path of state evolution is spatially dependent. Thus, the associated spin redirection phases induce wavefront reshaping. The area Ω is proportional to the azimuthal angle ϕ and we obtain the spin redirection phase γ = −2σϕ [see Fig. 5(b)], which is equal to the phase factor calculated in the previous section [Eq. (9)]. This geometrical understanding is very clear, and is useful when designing optical devices that utilize spatially-dependent geometric phase.

Fig. 5 Reflection from the surface of conical reflector. (a) The changing of the wave vector during the reflection on the conical reflector. (b) Change of the modified wave vector k̃n on k̃-sphere.

3. Experiment

To demonstrate the helical mode conversion using the conical reflector, we designed an aluminum-coated conical reflector that is reflective at visible wavelengths. Figure 6 shows the fabricated conical reflector (Natsume Optical Corporation), which is 25 mm in diameter and 17.5 mm in height. The surface accuracy of the conical surface is less than 5λ and the angular tolerance of the vertex angle is 90° ± 0.2°. Unfortunately, the grinding process for the conical surface results in a small recess (2mm in diameter and 2mm in depth) in the center of the reflector. As mentioned later, a flat portion at the bottom of the recess may scatter the incident light and spurious waves are observed.

Fig. 6 Fabricated conical reflector. For the grinding process of the fabrication, there remains a tiny recess at the center of the conical reflector.

To verify the spiral wavefront shape of the light emerging from the conical reflector, we constructed a Michelson interferometer, as shown in Fig. 7(a). After beam shaping using a single mode optical fiber, a 532-nm laser beam with a beam-waist radius of approximately 5 mm is sent through the horizontal linear polarizer (PL). Next, the beam is split into two beams by a non-polarizing beam splitter (BS). One beam is sent to the conical reflector, which we call the signal beam, and the other is used as a reference. The initial horizontal polarization of the signal beam is changed to right or left circular polarization using a quarter-wave plate with a 45° or 135° angle of the fast axis, and is then incident on the conical reflector. The beam reflected from the conical reflector is then sent through the quarter-wave plate again and its polarization is reverted to the original horizontal polarization. Finally, the signal beam was superimposed with the reference beam by the BS to yield the interferogram, which was observed with an image sensor.

Fig. 7 Experimental setup and results. (a) Michelson interferometer to observe the spiral interferogram of the helical mode. (b) Intensity distribution of the reflected wave from the conical reflector. (c), (d) Interferograms generated by the reflected beam from the conical reflector and the quasi-spherical wave. The area encircled by the green dashed line corresponds to the beam diffracted from the recess at the bottom of the conical reflector. There are some deformations of wavefronts. We could remove this artifact by using a perfect conical reflector without a recess.

First, we observed the intensity profile of the reflected beam from the conical reflector by blocking the reference beam [Fig. 7(b)]. The intensity profile was found to have the doughnut-like shape expected for a helical mode [see Fig. 2(a)]. Within the region encircled by the green dashed line in Fig. 7(b), however, there are spurious waves diffracted from the center recess of the reflector. The radius of the green circle can be determined by the diffraction from the tiny recess to the image sensor located at a distance of 25cm. In this situation the Fresnel number is calculated as 7.5 and the diffraction effect is small. Therefore, the radius of the green circle is almost equal to the radius of the recess.

Next, we observed the interferogram between the signal and reference beams. Because the optical length of the reference arm is much larger than that of the signal arm, the wavefront of the reference beam can be considered approximately spherical. Figures 7(c) and 7(d) show the acquired images of the interference patterns for the quarter waveplate with 45° [Fig. 7(c)] and 135° [Fig. 7(d)] angle of the fast axis. The inner region of the green dashed lines includes the light affected by the diffraction from the center recess. The double spirals outside the dashed line in Fig. 7(c) and 7(d) show unambiguously that the wavefront of the light reflected from the conical reflector has helical wavefronts with mode number l = ±2, and that the input polarization on the conical reflector can control the sign of the mode conversion.

4. Conclusion

In this paper, we have elucidated the relationship of spin, orbital, and total angular momenta between input and output beams on the conical reflector based on the three-dimensional matrix calculus. We have also presented a theoretical analysis of the function of a conical reflector using the spatially-dependent spin redirection phase. Moreover, we have experimentally verified helical mode conversion using a fabricated conical reflector. The experimental results show that the conical reflector induces 2-raising or 2-lowering helical mode conversion, which depends upon the input helicity.

Because the actual reflectors, which have finite conductivities, induce unequal phase shifts for the S and P components of the polarization, the conservation of helicity is partly violated. However, it is possible to compensate for the imperfection by placing a circular polarizer in front of the conical reflector. In this case, the output light field will have the expected helical wavefront, regardless of the wavelength, but at the price of some optical loss. Thus, unlike previous methods, the conical reflector has the advantage of allowing the manipulation of the helical wavefront of light with a wide spectral range, e.g., white light and short light pulses. Our demonstration serves as a foundation for the design of new achromatic optical devices that utilize spatially-dependent spin redirection phase.

Appendices

Appendix A: Helicity vector and helicity of polarized plain wave

Let us consider a monochromatic wave with an electric field
E(x,t)= E˜(x) e −iωt+c.c.,
(17)
where Ẽ(x) is the complex electric field and ω is the angular frequency. The helicity vector of the above wave field can be defined as
σ≡i E˜(x)× E˜*(x) | E˜(x)|2.
(18)
The magnitude |σ| corresponds to the polarization ellipticity and the direction indicates the handedness of the temporal rotation of E.

For an arbitrary polarized plane wave propagating along the z-axis,
E˜(x)= E0 e ik⋅x ( e i ϕ1cosθ e i ϕ2sinθ 0),
(19)
with 0 ≤ θ ≤ π/2, 0 ≤ ϕ1 ≤ 2π, and 0 ≤ ϕ2 ≤ 2π, the helicity vector is calculated as
σ=sin ( ϕ2− ϕ1)sin(2θ) ez,
(20)
where ez is the unit vector along the z-axis. The magnitude of Eq. (20) is equal to the Stokes parameter S3, which corresponds to the polarization ellipticity. The rotation direction of the electric field vector follows the so-called right-hand screw rule around σ.

Moreover, even if an arbitrary three-dimensional rotation ℛ is applied to Ẽ, σ is conserved in the sense that the rotation in Ẽ induces the same rotation to σ:
σ′=i ℛ E˜(x)×ℛ E˜*(x) | ℛ E˜(x)|2       =i ℛ E˜(x)× E˜*(x) | E˜(x)|2=ℛσ.
(21)
Thus, the helicity vector of the arbitrary electric field has the property described in the first paragraph of this appendix.

Because of the transversality condition, k · E = 0, σ is parallel or anti-parallel to k (we can confirm this property from k × σ = 0). When σ is parallel (anti-parallel) to k, we call it right-handed (left-handed) circularly polarized light. To determine the handedness of the polarization, we define the helicity σ by
σ≡ k⋅σk,
(22)
where k is the wavenumber of the plane wave. The magnitude and the sign of σ indicate the ellipticity and the handedness of the polarization, respectively. From Eq. (22), the helicity vector can be represented using the helicity and the wave vector as
σ= σkk.
(23)

Acknowledgments

We thank Shuhei Tamate in Kyoto University, Japan for providing useful comments and suggestions. This work was partially supported by Y2009-2010 Practical Application Research No.1513 of Japan Science and Technology agency (JST), Japan Society for the Promotion of Science (JSPS) No. 18360180 and No. 22657062, and Grant of Nichia Corporation.

References and links

1.

M. V. Berry, “Quantal phase factors accompanying adiabatic changes,” Proc. R. Soc. London A 392, 45–57 (1984). [CrossRef]

2.

A. Shapere and F. Wilczek, eds., Geometric Phases in Physics (World Scientific, Singapore, 1989).

3.

R. Y. Chiao and Y.-S. Wu, “Manifestations of Berry’s topological phase for the photon,” Phys. Rev. Lett. 57, 933–936 (1986). [CrossRef] [PubMed]

4.

M. V. Berry, “Interpreting the anholonomy of coiled light,” Nature 326, 277–278 (1987). [CrossRef]

5.

A. Tomita and R. Y. Chiao, “Observation of Berry’s topological phase by use of an optical fiber,” Phys. Rev. Lett. 57, 937–940 (1986). [CrossRef] [PubMed]

6.

M. Kitano, T. Yabuzaki, and T. Ogawa, “Comment on Observation of Berry’s topological phase by use of an optical fiber,” Phys. Rev. Lett. 58, 523–523 (1987). [CrossRef] [PubMed]

7.

T. F. Jordan, “Quantum phases from reflections,” Phys. Rev. Lett. 60, 1584–1584 (1988). [CrossRef] [PubMed]

8.

R. Y. Chiao, A. Antaramian, K. M. Ganga, H. Jiao, S. R. Wilkinson, and H. Nathel, “Observation of a topological phase by means of a nonplanar Mach-Zehnder interferometer,” Phys. Rev. Lett. 60, 1214–1217 (1988). [CrossRef] [PubMed]

9.

M. Segev, R. Solomon, and A. Yariv, “Manifestation of Berry’s phase in image-bearing optical beams,” Phys. Rev. Lett. 69, 590–592 (1992). [CrossRef] [PubMed]

10.

E. J. Galvez and C. D. Holmes, “Geometric phase of optical rotators,” J. Opt. Soc. Am. A 16, 1981–1985 (1999). [CrossRef]

11.

S. Pancharatnam, “Generalized theory of interference, and its applications,” Proc. Ind. Acad. Sci. A 44, 247–262 (1956).

12.

M. V. Berry, “The adiabatic phase and Pancharatnam’s phase for polarized light,” J. Mod. Opt. 34, 1401–1407 (1987). [CrossRef]

13.

R. Bhandari, “Polarization of light and topological phases,” Phys. Rep. 281, 1–64 (1997). [CrossRef]

14.

Z. Bomzon, G. Biener, V. Kleiner, and E. Hasman, “Space-variant pancharatnam-berry phase optical elements with computer-generated subwavelengths graings,” Opt. Lett. 27, 1141–1143 (2002). [CrossRef]

15.

L. Allen, M. W. Beijersbergen, R. J. C. Spreeuw, and J. P. Woerdman, “Orbital angular momentum of light and the transformation of Laguerre-Gaussian laser modes,” Phys. Rev. A 45, 8185–8189 (1992). [CrossRef] [PubMed]

16.

H. He, M. E. J. Friese, N. R. Heckenberg, and H. Rubinsztein-Dunlop, “Direct observation of transfer of angular momentum to absorptive particles from a laser beam with a phase singularity,” Phys. Rev. Lett. 75, 826–829 (1995). [CrossRef] [PubMed]

17.

A. Mair, A. Vaziri, G. Weihs, and A. Zeilinger, “Entanglement of the orbital angular momentum states of photons,” Nature 412, 313–316 (2001). [CrossRef] [PubMed]

18.

L. Marrucci, C. Manzo, and D. Paparo, “Optical spin-to-orbital angular momentum conversion in inhomogeneous anisotropic media,” Phys. Rev. Lett. 96, 163905 (2006). [CrossRef] [PubMed]

19.

M. Mansuripur, A. R. Zakharian, and E. M. Wright, “Spin and orbital angular momenta of light reflected from a cone,” Phys. Rev. A 84, 033813 (2011). [CrossRef]

20.

M. Mansuripur, A. R. Zakharian, and E. M. Wright, “Spin-to-orbital angular momentum exchange via reflection from a cone,” Proc. SPIE 8097, 809716 (2011). [CrossRef]

21.

C. Konz and G. Benford, “Geometric absorption of electromagnetic angular momentum,” Opt. Comm. 226, 249–254 (2003). [CrossRef]

22.

T. A. Nieminen, “Comment on Geometric absorption of electromagnetic angular momentum,” Opt. Comm. 235, 227–229 (2004). [CrossRef]

OCIS Codes
(220.2740) Optical design and fabrication : Geometric optical design
(350.1370) Other areas of optics : Berry's phase
(050.4865) Diffraction and gratings : Optical vortices

ToC Category:
Physical Optics

History
Original Manuscript: May 9, 2012
Revised Manuscript: May 25, 2012
Manuscript Accepted: May 30, 2012
Published: June 11, 2012

Citation
H. Kobayashi, K. Nonaka, and M. Kitano, "Helical mode conversion using conical reflector," Opt. Express 20, 14064-14074 (2012)
http://www.opticsinfobase.org/oe/abstract.cfm?URI=oe-20-13-14064


Sort:  Author  |  Year  |  Journal  |  Reset  

References

  1. M. V. Berry, “Quantal phase factors accompanying adiabatic changes,” Proc. R. Soc. London A392, 45–57 (1984). [CrossRef]
  2. A. Shapere and F. Wilczek, eds., Geometric Phases in Physics (World Scientific, Singapore, 1989).
  3. R. Y. Chiao and Y.-S. Wu, “Manifestations of Berry’s topological phase for the photon,” Phys. Rev. Lett.57, 933–936 (1986). [CrossRef] [PubMed]
  4. M. V. Berry, “Interpreting the anholonomy of coiled light,” Nature326, 277–278 (1987). [CrossRef]
  5. A. Tomita and R. Y. Chiao, “Observation of Berry’s topological phase by use of an optical fiber,” Phys. Rev. Lett.57, 937–940 (1986). [CrossRef] [PubMed]
  6. M. Kitano, T. Yabuzaki, and T. Ogawa, “Comment on Observation of Berry’s topological phase by use of an optical fiber,” Phys. Rev. Lett.58, 523–523 (1987). [CrossRef] [PubMed]
  7. T. F. Jordan, “Quantum phases from reflections,” Phys. Rev. Lett.60, 1584–1584 (1988). [CrossRef] [PubMed]
  8. R. Y. Chiao, A. Antaramian, K. M. Ganga, H. Jiao, S. R. Wilkinson, and H. Nathel, “Observation of a topological phase by means of a nonplanar Mach-Zehnder interferometer,” Phys. Rev. Lett.60, 1214–1217 (1988). [CrossRef] [PubMed]
  9. M. Segev, R. Solomon, and A. Yariv, “Manifestation of Berry’s phase in image-bearing optical beams,” Phys. Rev. Lett.69, 590–592 (1992). [CrossRef] [PubMed]
  10. E. J. Galvez and C. D. Holmes, “Geometric phase of optical rotators,” J. Opt. Soc. Am. A16, 1981–1985 (1999). [CrossRef]
  11. S. Pancharatnam, “Generalized theory of interference, and its applications,” Proc. Ind. Acad. Sci. A44, 247–262 (1956).
  12. M. V. Berry, “The adiabatic phase and Pancharatnam’s phase for polarized light,” J. Mod. Opt.34, 1401–1407 (1987). [CrossRef]
  13. R. Bhandari, “Polarization of light and topological phases,” Phys. Rep.281, 1–64 (1997). [CrossRef]
  14. Z. Bomzon, G. Biener, V. Kleiner, and E. Hasman, “Space-variant pancharatnam-berry phase optical elements with computer-generated subwavelengths graings,” Opt. Lett.27, 1141–1143 (2002). [CrossRef]
  15. L. Allen, M. W. Beijersbergen, R. J. C. Spreeuw, and J. P. Woerdman, “Orbital angular momentum of light and the transformation of Laguerre-Gaussian laser modes,” Phys. Rev. A45, 8185–8189 (1992). [CrossRef] [PubMed]
  16. H. He, M. E. J. Friese, N. R. Heckenberg, and H. Rubinsztein-Dunlop, “Direct observation of transfer of angular momentum to absorptive particles from a laser beam with a phase singularity,” Phys. Rev. Lett.75, 826–829 (1995). [CrossRef] [PubMed]
  17. A. Mair, A. Vaziri, G. Weihs, and A. Zeilinger, “Entanglement of the orbital angular momentum states of photons,” Nature412, 313–316 (2001). [CrossRef] [PubMed]
  18. L. Marrucci, C. Manzo, and D. Paparo, “Optical spin-to-orbital angular momentum conversion in inhomogeneous anisotropic media,” Phys. Rev. Lett.96, 163905 (2006). [CrossRef] [PubMed]
  19. M. Mansuripur, A. R. Zakharian, and E. M. Wright, “Spin and orbital angular momenta of light reflected from a cone,” Phys. Rev. A84, 033813 (2011). [CrossRef]
  20. M. Mansuripur, A. R. Zakharian, and E. M. Wright, “Spin-to-orbital angular momentum exchange via reflection from a cone,” Proc. SPIE8097, 809716 (2011). [CrossRef]
  21. C. Konz and G. Benford, “Geometric absorption of electromagnetic angular momentum,” Opt. Comm.226, 249–254 (2003). [CrossRef]
  22. T. A. Nieminen, “Comment on Geometric absorption of electromagnetic angular momentum,” Opt. Comm.235, 227–229 (2004). [CrossRef]

Cited By

 Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.


« Previous Article  |  Next Article »

OSA is a member of CrossRef.

CrossCheck Deposited