OSA's Digital Library

Optics Express

Optics Express

  • Editor: C. Martijn de Sterke
  • Vol. 20, Iss. 14 — Jul. 2, 2012
  • pp: 14871–14878
« Show journal navigation

Tunable broad-band perfect absorber by exciting of multiple plasmon resonances at optical frequency

Junqiao Wang, Chunzhen Fan, Pei Ding, Jinna He, Yongguang Cheng, Weiqin Hu, Genwang Cai, Erjun Liang, and Qianzhong Xue  »View Author Affiliations


Optics Express, Vol. 20, Issue 14, pp. 14871-14878 (2012)
http://dx.doi.org/10.1364/OE.20.014871


View Full Text Article

Acrobat PDF (1121 KB)





Browse Journals / Lookup Meetings

Browse by Journal and Year


   


Lookup Conference Papers

Close Browse Journals / Lookup Meetings

Article Tools

Share
Citations

Abstract

A broad-band perfect absorber composing a two-dimensional periodic metal-dielectric-metal sandwiches array on dielectric/metal substrate is designed and numerically investigated. It is shown that the nearly-perfect absorption with a bandwidth of about 50 nm in visible region can be achieved by overlapping of two plasmon resonances: one originating from the coupling of electric dipoles between adjacent unit cells and another arising from magnetic dipole plasmon resonances. A capacitor-inductor circuit description is introduced to explain the dependence of resonance frequencies and band-width on geometrical parameters.

© 2012 OSA

1. Introduction

Metamaterials have attracted extensive attention in recent years due to their ability to display exotic properties that are unavailable in nature [1

1. N. I. Landy, S. Sajuyigbe, J. J. Mock, D. R. Smith, and W. J. Padilla, “Perfect metamaterial absorber,” Phys. Rev. Lett. 100(20), 207402 (2008). [CrossRef] [PubMed]

], such as negative refraction [2

2. P. Ding, E. J. Liang, W. Q. Hu, Q. Zhou, L. Zhang, Y. X. Yuan, and Q. Z. Xue, “SPP-associated dual left-handed bands and field enhancement in metal-dielectric-metal metamaterial perforated by asymmetric cross hole arrays,” Opt. Express 17(4), 2198–2206 (2009). [CrossRef] [PubMed]

], invisible cloak [3

3. W. Cai, U. K. Chettiar, A. V. Kildishev, and V. M. Shalaev, “Optical cloaking with metamaterials,” Nat. Photonics 1(4), 224–227 (2007). [CrossRef]

], superlens [4

4. N. Fang, H. Lee, C. Sun, and X. Zhang, “Sub-diffraction-limited optical imaging with a silver superlens,” Science 308(5721), 534–537 (2005). [CrossRef] [PubMed]

], etc. Complex electric permittivity (ε) and magnetic permeability (μ) are two fundamental parameters characterizing the electromagnetic properties of metamaterials. With fair adjustment of the electric resonance and magnetic resonance independently, it is possible to match the impedance in free space (i.e.z=μ/ε=1), minimizing the reflectance to zero [5

5. P. Ding, E. J. Liang, G. W. Cai, W. Q. Hu, C. Z. Fan, and Q. Z. Xue, “Dual-band perfect absorption and field enhancement by interaction between localized and propagating surface plasmons in optical metamaterials,” J. Opt. 13(7), 075005 (2011). [CrossRef]

]. Particularly, perfect absorption with zero reflection and transmission has potential applications in photovoltaic cells [6

6. V. E. Ferry, J. N. Munday, and H. A. Atwater, “Design considerations for plasmonic photovoltaics,” Adv. Mater. (Deerfield Beach Fla.) 22(43), 4794–4808 (2010). [CrossRef] [PubMed]

], sensors [7

7. N. Liu, M. Mesch, T. Weiss, M. Hentschel, and H. Giessen, “Infrared perfect absorber and its application as plasmonic sensor,” Nano Lett. 10(7), 2342–2348 (2010). [CrossRef] [PubMed]

,8

8. W. Q. Hu, E. J. Liang, P. Ding, G. W. Cai, and Q. Z. Xue, “Surface plasmon resonance and field enhancement in #-shaped gold wires metamaterial,” Opt. Express 17(24), 21843–21849 (2009). [CrossRef] [PubMed]

], filters [9

9. X. Li, L. Y. Yang, C. G. Hu, X. G. Luo, and M. H. Hong, “Tunable bandwidth of band-stop filter by metamaterial cell coupling in optical frequency,” Opt. Express 19(6), 5283–5289 (2011). [CrossRef] [PubMed]

], imaging [10

10. N. I. Landy, C. M. Bingham, T. Tyler, N. Jokerst, D. R. Smith, and W. J. Padilla, “Design, theory, and measurement of a polarization-insensitive absorber for terahertz imaging,” Phys. Rev. B 79(12), 125104 (2009). [CrossRef]

], and thermal emitters and detectors [11

11. X. L. Liu, T. Tyler, T. Starr, A. F. Starr, N. M. Jokerst, and W. J. Padilla, “Taming the blackbody with infrared metamaterials as selective thermal emitters,” Phys. Rev. Lett. 107(4), 045901 (2011). [CrossRef] [PubMed]

].

The first successful experimental realization of perfect absorber with metamaterials was done by Landy et al. [1

1. N. I. Landy, S. Sajuyigbe, J. J. Mock, D. R. Smith, and W. J. Padilla, “Perfect metamaterial absorber,” Phys. Rev. Lett. 100(20), 207402 (2008). [CrossRef] [PubMed]

]. Their structures consisted of a metallic split ring and a cut wire, which could couple separately to electric and magnetic fields and give rise to an absorbance of about 88% at 11.5 GHz within a single unit cell layer. Subsequently, other structures such as electric ring resonators [12

12. H. Tao, C. M. Bingham, A. C. Strikwerda, D. Pilon, D. Shrekenhamer, N. I. Landy, K. Fan, X. Zhang, W. J. Padilla, and R. D. Averitt, “Highly flexible wide angle of incidence terahertz metamaterial absorber: Design, fabrication and characterization,” Phys. Rev. B 78(24), 241103 (2008). [CrossRef]

,13

13. X. L. Liu, T. Starr, A. F. Starr, and W. J. Padilla, “Infrared spatial and frequency selective metamaterial with near-unity absorbance,” Phys. Rev. Lett. 104(20), 207403 (2010). [CrossRef] [PubMed]

], periodical metallic nanoparticles [5

5. P. Ding, E. J. Liang, G. W. Cai, W. Q. Hu, C. Z. Fan, and Q. Z. Xue, “Dual-band perfect absorption and field enhancement by interaction between localized and propagating surface plasmons in optical metamaterials,” J. Opt. 13(7), 075005 (2011). [CrossRef]

,14

14. J. M. Hao, J. Wang, X. L. Liu, W. J. Padilla, L. Zhou, and M. Qiu, “High performance optical absorber based on a plasmonic metamaterial,” Appl. Phys. Lett. 96(25), 251104 (2010). [CrossRef]

], sub-wavelength hole arrays [15

15. Q. Y. Wen, H. W. Zhang, Y. S. Xie, Q. H. Yang, and Y. L. Liu, “Dual band terahertz metamaterial absorber: Design, fabrication and characterization,” Appl. Phys. Lett. 95(24), 241111 (2009). [CrossRef]

] were designed for perfect or near-perfect absorbers in different spectral ranges (microwave, THz, infrared and visible frequencies [16

16. C. G. Hu, X. Li, Q. Feng, X. N. Chen, and X. G. Luo, “Investigation on the role of the dielectric loss in metamaterial absorber,” Opt. Express 18(7), 6598–6603 (2010). [CrossRef] [PubMed]

,17

17. C. G. Hu, Z. Y. Zhao, X. N. Chen, and X. G. Luo, “Realizing near-perfect absorption at visible frequencies,” Opt. Express 17(13), 11039–11044 (2009). [CrossRef] [PubMed]

]). Such structures were characterized by narrow-band response. Sub-wavelength square hole array [18

18. C. G. Hu, L. Y. Liu, Z. Y. Zhao, X. N. Chen, and X. G. Luo, “Mixed plasmons coupling for expanding the bandwidth of near-perfect absorption at visible frequencies,” Opt. Express 17(19), 16745–16749 (2009). [CrossRef] [PubMed]

], multiplexed plasmonic nanostructures [19

19. J. P. Guo, Y. Zou, H. S. Leong, and B. Y. Zhang, “Multiplexed Nanostructure Metamaterial for Wide Spectral and Perfect Light Absorption,” in Photonic Metamaterials and Plasmonics, OSA Technical Digest (CD), paper MWB4 (2010).

], and cut-wire metamaterials [20

20. H. Wakatsuchi, S. Greedy, C. Christopoulos, and J. Paul, “Customised broadband metamaterial absorbers for arbitrary polarisation,” Opt. Express 18(21), 22187–22198 (2010). [CrossRef] [PubMed]

] were proposed for wide-band perfect absorbers in visible and infrared frequencies. Careful design of metamaterials with multiple resonances is generally required for wide-band perfect absorber [21

21. T. T. Yeh, S. Genovesi, A. Monorchio, E. Prati, F. Costa, T. Y. Huang, and T. J. Yen, “Ultra-broad and sharp-transition bandpass terahertz filters by hybridizing multiple resonances mode in monolithic metamaterials,” Opt. Express 20(7), 7580–7589 (2012). [CrossRef] [PubMed]

] though it is possible to broaden absorption peaks using high intrinsic damping of metals in a perfect plasmonic absorber [22

22. A. Tittl, P. Mai, R. Taubert, D. Dregely, N. Liu, and H. Giessen, “Palladium-based plasmonic perfect absorber in the visible wavelength range and its application to hydrogen sensing,” Nano Lett. 11(10), 4366–4369 (2011). [CrossRef] [PubMed]

]. By combining all distinct narrow-band resonant frequencies together and packing them closely through varying the geometric parameters of different component in the unit cell, broadband resonance metamaterials can be obtained [23

23. C. Wu and G. Shvets, “Design of metamaterial surfaces with broadband absorbance,” Opt. Lett. 37(3), 308–310 (2012). [CrossRef] [PubMed]

]. Following this design strategy, broad- or multiple-band metamaterial absorbers have been demonstrated in microwave [24

24. Y. H. Liu, S. Gu, C. R. Luo, and X. P. Zhao, “Ultra-thin broadband metamaterial absorber,” Appl. Phys., A Mater. Sci. Process. (2012), doi:. [CrossRef]

,25

25. W. R. Zhu, Y. J. Huang, I. D. Rukhlenko, G. J. Wen, and M. Premaratne, “Configurable metamaterial absorber with pseudo wideband spectrum,” Opt. Express 20(6), 6616–6621 (2012). [CrossRef] [PubMed]

], THz [26

26. J. Grant, Y. Ma, S. Saha, A. Khalid, and D. R. S. Cumming, “Polarization insensitive, broadband terahertz metamaterial absorber,” Opt. Lett. 36(17), 3476–3478 (2011). [CrossRef] [PubMed]

], infrared [19

19. J. P. Guo, Y. Zou, H. S. Leong, and B. Y. Zhang, “Multiplexed Nanostructure Metamaterial for Wide Spectral and Perfect Light Absorption,” in Photonic Metamaterials and Plasmonics, OSA Technical Digest (CD), paper MWB4 (2010).

,23

23. C. Wu and G. Shvets, “Design of metamaterial surfaces with broadband absorbance,” Opt. Lett. 37(3), 308–310 (2012). [CrossRef] [PubMed]

,27

27. J. Hendrickson, J. P. Guo, B. Y. Zhang, W. Buchwald, and R. Soref, “Wideband perfect light absorber at midwave infrared using multiplexed metal structures,” Opt. Lett. 37(3), 371–373 (2012). [CrossRef] [PubMed]

], respectively. For example, Guo et al. [19

19. J. P. Guo, Y. Zou, H. S. Leong, and B. Y. Zhang, “Multiplexed Nanostructure Metamaterial for Wide Spectral and Perfect Light Absorption,” in Photonic Metamaterials and Plasmonics, OSA Technical Digest (CD), paper MWB4 (2010).

] and Hendrickson et al. [27

27. J. Hendrickson, J. P. Guo, B. Y. Zhang, W. Buchwald, and R. Soref, “Wideband perfect light absorber at midwave infrared using multiplexed metal structures,” Opt. Lett. 37(3), 371–373 (2012). [CrossRef] [PubMed]

] theoretically and experimentally demonstrated wide-band perfect absorbers with multiplexed plasmonic nanostructures in midwave infrared frequencies. This multiplexed structure comprising two gold metal squares of different sizes in the unit cell exhibits absorption of above 98% over a bandwidth of 0.5 μm centered at 3.45 μm wavelength. Broadband metamaterials absorber in higher frequencies has been challenging. Though Hu et al. [18

18. C. G. Hu, L. Y. Liu, Z. Y. Zhao, X. N. Chen, and X. G. Luo, “Mixed plasmons coupling for expanding the bandwidth of near-perfect absorption at visible frequencies,” Opt. Express 17(19), 16745–16749 (2009). [CrossRef] [PubMed]

] observed near-perfect absorption (about 90%) by combing mix-sized sub-wavelength square hole arrays with thick metal layer; the bandwidth is about 17 nm. Besides, the combination of different sized or shaped subunits needs accurate control and leads to the complexity in manufacturing.

2. Structures and design

A unit cell of the compact structure is shown in Fig. 1(a)
Fig. 1 (a) Unit structure of the proposed wide-band perfect absorber; (b) simulated absorption spectra of the wide-band perfect absorber and the components of this system. The green curve: MDM sandwich alone; red curve: Au square on dielectric/metal substrate; blue curve: MDM sandwich structures on dielectric/metal substrate. The insert in (b) is the effective impedance Z of designed metamaterials absorber, where the dashed line denotes Z = 1.
. The sandwiched layers have a square planar structure with side length ax = ay = a = 346 nm. The thicknesses of each metal slab and dielectric layer are set to t1 = 30 nm and t2 = 35 nm, respectively. The thickness of the metal substrate is t3 = 100 nm. The unit cells are periodically arranged along x and y directions with Px = Py = P = 480 nm. A plane wave propagates along the z direction with the electric and magnetic fields polarized along the x and y directions, respectively. The simulation is performed by the frequency domain solver of commercial software (CST Micro Studio), where the periodic boundary conditions are used for a unit cell in the x-y plane and perfectly matched layers (PML) are applied in the z axis. The metal layers are chosen to be Au and its dielectric properties are derived from ref [31

31. E. D. Palik, Handbook of Optical Constants of Solids (Academic Press, 1985).

]. The dielectric layer is SiO2 with the dielectric constant ofεd=2.07.

The simulated absorption spectrum of the designed structure is presented by the blue curve in Fig. 1(b). It is obvious that a wide band near-perfect absorption around 770 nm is obtained (absorption coefficients of 99.98% at λm = 745 nm and 99.96% at λe = 795 nm). Two resonances are expected to account for this wide band near-perfect absorption. Generally, absorption close to 100% requires more than just one or more resonant absorption bands and impedance matching [32

32. Y. Avitzour, Y. A. Urzhumov, and G. Shvets, “Wide-angle infrared absorber based on a negative-index plasmonic metamaterial,” Phys. Rev. B 79(4), 045131 (2009). [CrossRef]

]. In order to see whether the broad band absorber has two impedance-matching frequencies close to 745 and 795nm, or just one somewhere in the middle of the absorption band, we calculated the effective impedances as a function of wavelength (see the insert in Fig. 1(b)) that are retrieved from the reflection and transmission coefficients [33

33. D. R. Smith and S. Schultz, “Determination of effective permittivity and permeability of metamaterials from reflection and transmission coefficients,” Phys. Rev. B 65(19), 195104 (2002). [CrossRef]

,34

34. D. R. Smith, D. C. Vier, T. Koschny, and C. M. Soukoulis, “Electromagnetic parameter retrieval from inhomogeneous metamaterials,” Phys. Rev. E Stat. Nonlin. Soft Matter Phys. 71(33 Pt 2B), 036617 (2005). [CrossRef] [PubMed]

]. It shows that the impedance matching conditions are reached around 745 nm (Z = 1.002 + i*0.033) and 795nm (Z = 0.982 + i*0.217).

In order to see structure’s inner workings of different parts and their contributions to the broadband absorption, we present the absorption spectra of the MDM sandwich alone (green curve in Fig. 1(b)) and an Au square on dielectric/metal substrate (red curve in Fig. 1(b)), respectively. The MDM sandwich structure alone gives rise to two relatively weak absorption peaks (P1 and P2) resulting from the interaction between top and down Au squares and the magnetic plasmon resonance, respectively, while the Au square on dielectric/metal substrate exhibits two strong absorption peaks (P3 and P4) arising from the propagating surface plasmon polaritons (SPP) and the coupling between adjacent Au squares, respectively. The assignments of these resonance peaks are based on an investigation of the E-field distributions (not shown here). It is evident that the thick Au substrate plays an important role in achieving near perfect absorption while the sandwich structure mainly contributes to the electric and magnetic plasmon resonances.

In order to understand the physical origins of this broad-band perfect absorption of the designed structure, we give the patterns of the electric and magnetic field components and the current distributions at the two absorption maxima (λm and λe) in Fig. 2
Fig. 2 The electric field E (a1, a2, b1, b2), magnetic field H (c1, c2) and current density C (d1, d2) distributions for the designed structure at the resonance wavelength λm = 745 nm (a1-d1) and λe = 795 nm (a2-d2), respectively. Picture (a1)-(d1) and (a2)-(c2) are plotted in x-z plane, and (d2) in y-z plane.
. Different field and current distributions are observed for the resonances excited at 745 nm and 795 nm. At 745 nm, two intense electric hot spots locate at the ends and two weak ones are approaching the middle in the dielectric layer of MDM while they are just oppositely distributed in the dielectric layer of the substrate (Fig. 2(b1)). Corresponding to the four field hot spots in the dielectric layer of the MDM, the positive and negative charges are alternatively distributed as “+”, “-”, “+”, “-” along the x direction in top metal layer or vice versa in bottom metal layer. The charge distribution at the metal substrate is the same as that at the top metal layer. Consequently, the total electric dipole moment of the whole structure nearly equals to zero. Nevertheless, the magnetic field (Fig. 2(c1)) has three hot spots in the dielectric layer of each MDM unit, two at the ends and one in the center, corresponding to the three anti-parallel current regions in the two adjacent metal layers (Fig. 2(d1)). The magnetic dipole moments in the dielectric layer of MDM are hence coherently strengthened by the circulating loops or anti-parallel currents. Because the two magnetic-field hot spots arise from the two strong magnetic dipoles oscillating in-phase, the whole structure behaves as a big net magnetic moment. Therefore, the resonance at λm = 745 nm can be attributed to multiple magnetic dipole plasmon resonances (referred to M1 mode) induced within a single unit cell.

Figures 2(a2), 2(b2), 2(c2) and 2(d2) plot the electric and magnetic field components and the current distributions at the resonance wavelength λe = 795 nm, respectively. The electric field hot spots appear at the ends of the top metal layer, corresponding to positive charges at one end and negative charges at the other end. Strong electric bonding interaction between adjacent unit cells occurs. All the inter-units interactions along the y direction are in-phase and strong, generating a huge net electric moment contributing to the resonance at λe = 795 nm. On the other hand, the magnetic fields are mainly confined in two regions: in the middle of the dielectric layers of a unit cell and the area between the units. Because the currents induced in the adjacent metal layers are anti-parallel, the magnetic dipole moments produced in the two dielectric layers (also the area between the MDMs) are opposite. The net magnetic moment of the whole structure approaches zero due to the cancellation effect. The resonance at 795 nm is therefore attributed to the inter-units electric plasmon resonance (E1 mode).

3. Geometrical effects on the resonance frequencies

In addition to the size effect of the metal squares in the MDM, the dielectric spacer and substrate are also expected to affect the near perfect absorption. Figure 4
Fig. 4 The two maximum absorption peaks change with thickness of dielectric layer of MDM structure.
shows the effect of the dielectric layer thickness t2 on the near perfect absorption. It is clear that the dielectric layer thickness has an obvious effect on the positions of the magnetic resonance but little on the electric resonance. The absorption peak at λm shifts to lower wavelength while that at λe remains almost unchanged because the increase in t2 reduces the capacitance in the MDM but not that between MDMs. We also inspected the electric field in the middle of the dielectric layer of the MDM with different t2 at corresponding resonance wavelength λm. The electric field is largest when t2 is about 35 nm, corresponding to the maximum overlap between the inter-units electric-dipole interaction and intra-unit multiple modes (E1 and M1), which is in coincidence with Fig. 4(a).

Figure 5
Fig. 5 The changes of absorption properties of the metamaterials with different refractive index n of dielectric materials of MDM and substrate.
shows the influence of the refractive index n of the dielectric spacer on the absorption. As the refractive index n increases, both resonances exhibit linear shifts towards longer wavelength (Fig. 5 (b)), resulting in a larger bandwidth (from 44 nm to 82 nm) of the near perfect absorption. This can be understood by the fact that the resonance wavelength is proportional to the square root of capacitance Cx (or Cy), which is proportional to the dielectric constants (i.e. Cx, Cyε = n2).

The sharp absorption peak appearing in the short wavelength region (Fig. 5(a)) is due to the resonance of SPP excited in the periodic metallic structures [35

35. J. N. He, G. W. Cai, P. Ding, C. Z. Fan, and E. J. Liang, “Surface plasmons coupling for local field enhancement in nanoring arrays on a metallic film,” Phys. Express 2, 10 (2012).

]. The resonance wavelength of the SPP is also proportional to effective refractive index of the periodic structure. As shown by Fig. 5(a), although the SPP resonance can be excited, it is too far away from the broad-absorption band for our designed structure and hence the coupling between the SPP and localized surface plasmon resonances (E1 and M1 modes) cannot occur. The SPP mode has no contribution to the broad-band absorption.

Figure 6
Fig. 6 Absorption spectra of the designed structures with different incident angles. The insert shows the direction of the incident light.
shows the dependence of the spectral response of the designed absorber with incident angles. It shows that the broad-band perfect absorption (above 90%) does not limited to normal incidence but can be extended at least to θ~20°. The absorption of the E1 mode decreases gradually with further increasing θ and an additional resonance appears in the low-wavelength region at θ>0°.

Finally, we give a comparison of broad-band perfect absorption with electromagnetically induced transparency (EIT) effect [36

36. N. Liu, T. Weiss, M. Mesch, L. Langguth, U. Eigenthaler, M. Hirscher, C. Sönnichsen, and H. Giessen, “Planar metamaterial analogue of electromagnetically induced transparency for plasmonic sensing,” Nano Lett. 10(4), 1103–1107 (2010). [CrossRef] [PubMed]

]. Though both are based on the interplay between two resonances with a different field structure, they have different physical origins. The “plasmonic EIT” arises from destructive interference of two different excitation modes, which gives rise to a sharp transmission peak within a broad transmittance dip. In Contrast, the near perfect broad-band absorption in our designed structure originates from the constructive overlap of the electric dipoles bounding interactions between adjacent unit cells and the intra-unit multiple magnetic dipole resonances induced by size effect.

4. Conclusions

By designing two-dimensional periodic MDM sandwich array structures on dielectric/metal substrate, the metamaterials with wide-band perfect absorption at visible frequencies have been successfully obtained and analyzed theoretically. The near perfect absorption originates from the overlap of two plasmon resonance modes. One originates from the electric dipoles oscillating between adjacent unit cells while the other corresponds to multiple magnetic dipole resonance induced by size effect. This kind of planar multilayer structure is easy to be fabricated by focus-ion-beam milling or electron-beam lithography and vacuum coating equipment, and can find practical applications in band-stop filters, solar cells, detection and imaging at visible frequencies.

Acknowledgments

This work was supported by the National Science Foundation of China (No.10974183 and 11104252), the Ministry of Education of China (No. 20114101110003), the Aeronautical Science Foundation of China (2011ZF55015), the Basic and Frontier Technology Research Program of Henan Province (No. 112300410264), the fund for Science & Technology innovation team of Zhengzhou (2011-03), and the cooperation fund with Fudan University (No. KL2011_01).

References and links

1.

N. I. Landy, S. Sajuyigbe, J. J. Mock, D. R. Smith, and W. J. Padilla, “Perfect metamaterial absorber,” Phys. Rev. Lett. 100(20), 207402 (2008). [CrossRef] [PubMed]

2.

P. Ding, E. J. Liang, W. Q. Hu, Q. Zhou, L. Zhang, Y. X. Yuan, and Q. Z. Xue, “SPP-associated dual left-handed bands and field enhancement in metal-dielectric-metal metamaterial perforated by asymmetric cross hole arrays,” Opt. Express 17(4), 2198–2206 (2009). [CrossRef] [PubMed]

3.

W. Cai, U. K. Chettiar, A. V. Kildishev, and V. M. Shalaev, “Optical cloaking with metamaterials,” Nat. Photonics 1(4), 224–227 (2007). [CrossRef]

4.

N. Fang, H. Lee, C. Sun, and X. Zhang, “Sub-diffraction-limited optical imaging with a silver superlens,” Science 308(5721), 534–537 (2005). [CrossRef] [PubMed]

5.

P. Ding, E. J. Liang, G. W. Cai, W. Q. Hu, C. Z. Fan, and Q. Z. Xue, “Dual-band perfect absorption and field enhancement by interaction between localized and propagating surface plasmons in optical metamaterials,” J. Opt. 13(7), 075005 (2011). [CrossRef]

6.

V. E. Ferry, J. N. Munday, and H. A. Atwater, “Design considerations for plasmonic photovoltaics,” Adv. Mater. (Deerfield Beach Fla.) 22(43), 4794–4808 (2010). [CrossRef] [PubMed]

7.

N. Liu, M. Mesch, T. Weiss, M. Hentschel, and H. Giessen, “Infrared perfect absorber and its application as plasmonic sensor,” Nano Lett. 10(7), 2342–2348 (2010). [CrossRef] [PubMed]

8.

W. Q. Hu, E. J. Liang, P. Ding, G. W. Cai, and Q. Z. Xue, “Surface plasmon resonance and field enhancement in #-shaped gold wires metamaterial,” Opt. Express 17(24), 21843–21849 (2009). [CrossRef] [PubMed]

9.

X. Li, L. Y. Yang, C. G. Hu, X. G. Luo, and M. H. Hong, “Tunable bandwidth of band-stop filter by metamaterial cell coupling in optical frequency,” Opt. Express 19(6), 5283–5289 (2011). [CrossRef] [PubMed]

10.

N. I. Landy, C. M. Bingham, T. Tyler, N. Jokerst, D. R. Smith, and W. J. Padilla, “Design, theory, and measurement of a polarization-insensitive absorber for terahertz imaging,” Phys. Rev. B 79(12), 125104 (2009). [CrossRef]

11.

X. L. Liu, T. Tyler, T. Starr, A. F. Starr, N. M. Jokerst, and W. J. Padilla, “Taming the blackbody with infrared metamaterials as selective thermal emitters,” Phys. Rev. Lett. 107(4), 045901 (2011). [CrossRef] [PubMed]

12.

H. Tao, C. M. Bingham, A. C. Strikwerda, D. Pilon, D. Shrekenhamer, N. I. Landy, K. Fan, X. Zhang, W. J. Padilla, and R. D. Averitt, “Highly flexible wide angle of incidence terahertz metamaterial absorber: Design, fabrication and characterization,” Phys. Rev. B 78(24), 241103 (2008). [CrossRef]

13.

X. L. Liu, T. Starr, A. F. Starr, and W. J. Padilla, “Infrared spatial and frequency selective metamaterial with near-unity absorbance,” Phys. Rev. Lett. 104(20), 207403 (2010). [CrossRef] [PubMed]

14.

J. M. Hao, J. Wang, X. L. Liu, W. J. Padilla, L. Zhou, and M. Qiu, “High performance optical absorber based on a plasmonic metamaterial,” Appl. Phys. Lett. 96(25), 251104 (2010). [CrossRef]

15.

Q. Y. Wen, H. W. Zhang, Y. S. Xie, Q. H. Yang, and Y. L. Liu, “Dual band terahertz metamaterial absorber: Design, fabrication and characterization,” Appl. Phys. Lett. 95(24), 241111 (2009). [CrossRef]

16.

C. G. Hu, X. Li, Q. Feng, X. N. Chen, and X. G. Luo, “Investigation on the role of the dielectric loss in metamaterial absorber,” Opt. Express 18(7), 6598–6603 (2010). [CrossRef] [PubMed]

17.

C. G. Hu, Z. Y. Zhao, X. N. Chen, and X. G. Luo, “Realizing near-perfect absorption at visible frequencies,” Opt. Express 17(13), 11039–11044 (2009). [CrossRef] [PubMed]

18.

C. G. Hu, L. Y. Liu, Z. Y. Zhao, X. N. Chen, and X. G. Luo, “Mixed plasmons coupling for expanding the bandwidth of near-perfect absorption at visible frequencies,” Opt. Express 17(19), 16745–16749 (2009). [CrossRef] [PubMed]

19.

J. P. Guo, Y. Zou, H. S. Leong, and B. Y. Zhang, “Multiplexed Nanostructure Metamaterial for Wide Spectral and Perfect Light Absorption,” in Photonic Metamaterials and Plasmonics, OSA Technical Digest (CD), paper MWB4 (2010).

20.

H. Wakatsuchi, S. Greedy, C. Christopoulos, and J. Paul, “Customised broadband metamaterial absorbers for arbitrary polarisation,” Opt. Express 18(21), 22187–22198 (2010). [CrossRef] [PubMed]

21.

T. T. Yeh, S. Genovesi, A. Monorchio, E. Prati, F. Costa, T. Y. Huang, and T. J. Yen, “Ultra-broad and sharp-transition bandpass terahertz filters by hybridizing multiple resonances mode in monolithic metamaterials,” Opt. Express 20(7), 7580–7589 (2012). [CrossRef] [PubMed]

22.

A. Tittl, P. Mai, R. Taubert, D. Dregely, N. Liu, and H. Giessen, “Palladium-based plasmonic perfect absorber in the visible wavelength range and its application to hydrogen sensing,” Nano Lett. 11(10), 4366–4369 (2011). [CrossRef] [PubMed]

23.

C. Wu and G. Shvets, “Design of metamaterial surfaces with broadband absorbance,” Opt. Lett. 37(3), 308–310 (2012). [CrossRef] [PubMed]

24.

Y. H. Liu, S. Gu, C. R. Luo, and X. P. Zhao, “Ultra-thin broadband metamaterial absorber,” Appl. Phys., A Mater. Sci. Process. (2012), doi:. [CrossRef]

25.

W. R. Zhu, Y. J. Huang, I. D. Rukhlenko, G. J. Wen, and M. Premaratne, “Configurable metamaterial absorber with pseudo wideband spectrum,” Opt. Express 20(6), 6616–6621 (2012). [CrossRef] [PubMed]

26.

J. Grant, Y. Ma, S. Saha, A. Khalid, and D. R. S. Cumming, “Polarization insensitive, broadband terahertz metamaterial absorber,” Opt. Lett. 36(17), 3476–3478 (2011). [CrossRef] [PubMed]

27.

J. Hendrickson, J. P. Guo, B. Y. Zhang, W. Buchwald, and R. Soref, “Wideband perfect light absorber at midwave infrared using multiplexed metal structures,” Opt. Lett. 37(3), 371–373 (2012). [CrossRef] [PubMed]

28.

G. Dolling, C. Enkrich, M. Wegener, J. F. Zhou, C. M. Soukoulis, and S. Linden, “Cut-wire pairs and plate pairs as magnetic atoms for optical metamaterials,” Opt. Lett. 30(23), 3198–3200 (2005). [CrossRef] [PubMed]

29.

D. A. Powell, I. V. Shadrivov, and Y. S. Kivshar, “Cut-wire-pair structures as two-dimensional magnetic metamaterials,” Opt. Express 16(19), 15185–15190 (2008). [CrossRef] [PubMed]

30.

D. J. Cho, F. Wang, X. Zhang, and Y. R. Shen, “Contribution of the electric quadrupole resonance in optical metamaterials,” Phys. Rev. B 78(12), 121101 (2008). [CrossRef]

31.

E. D. Palik, Handbook of Optical Constants of Solids (Academic Press, 1985).

32.

Y. Avitzour, Y. A. Urzhumov, and G. Shvets, “Wide-angle infrared absorber based on a negative-index plasmonic metamaterial,” Phys. Rev. B 79(4), 045131 (2009). [CrossRef]

33.

D. R. Smith and S. Schultz, “Determination of effective permittivity and permeability of metamaterials from reflection and transmission coefficients,” Phys. Rev. B 65(19), 195104 (2002). [CrossRef]

34.

D. R. Smith, D. C. Vier, T. Koschny, and C. M. Soukoulis, “Electromagnetic parameter retrieval from inhomogeneous metamaterials,” Phys. Rev. E Stat. Nonlin. Soft Matter Phys. 71(33 Pt 2B), 036617 (2005). [CrossRef] [PubMed]

35.

J. N. He, G. W. Cai, P. Ding, C. Z. Fan, and E. J. Liang, “Surface plasmons coupling for local field enhancement in nanoring arrays on a metallic film,” Phys. Express 2, 10 (2012).

36.

N. Liu, T. Weiss, M. Mesch, L. Langguth, U. Eigenthaler, M. Hirscher, C. Sönnichsen, and H. Giessen, “Planar metamaterial analogue of electromagnetically induced transparency for plasmonic sensing,” Nano Lett. 10(4), 1103–1107 (2010). [CrossRef] [PubMed]

OCIS Codes
(240.6680) Optics at surfaces : Surface plasmons
(260.5740) Physical optics : Resonance
(160.3918) Materials : Metamaterials

ToC Category:
Metamaterials

History
Original Manuscript: February 22, 2012
Revised Manuscript: May 16, 2012
Manuscript Accepted: May 16, 2012
Published: June 19, 2012

Citation
Junqiao Wang, Chunzhen Fan, Pei Ding, Jinna He, Yongguang Cheng, Weiqin Hu, Genwang Cai, Erjun Liang, and Qianzhong Xue, "Tunable broad-band perfect absorber by exciting of multiple plasmon resonances at optical frequency," Opt. Express 20, 14871-14878 (2012)
http://www.opticsinfobase.org/oe/abstract.cfm?URI=oe-20-14-14871


Sort:  Author  |  Year  |  Journal  |  Reset  

References

  1. N. I. Landy, S. Sajuyigbe, J. J. Mock, D. R. Smith, and W. J. Padilla, “Perfect metamaterial absorber,” Phys. Rev. Lett.100(20), 207402 (2008). [CrossRef] [PubMed]
  2. P. Ding, E. J. Liang, W. Q. Hu, Q. Zhou, L. Zhang, Y. X. Yuan, and Q. Z. Xue, “SPP-associated dual left-handed bands and field enhancement in metal-dielectric-metal metamaterial perforated by asymmetric cross hole arrays,” Opt. Express17(4), 2198–2206 (2009). [CrossRef] [PubMed]
  3. W. Cai, U. K. Chettiar, A. V. Kildishev, and V. M. Shalaev, “Optical cloaking with metamaterials,” Nat. Photonics1(4), 224–227 (2007). [CrossRef]
  4. N. Fang, H. Lee, C. Sun, and X. Zhang, “Sub-diffraction-limited optical imaging with a silver superlens,” Science308(5721), 534–537 (2005). [CrossRef] [PubMed]
  5. P. Ding, E. J. Liang, G. W. Cai, W. Q. Hu, C. Z. Fan, and Q. Z. Xue, “Dual-band perfect absorption and field enhancement by interaction between localized and propagating surface plasmons in optical metamaterials,” J. Opt.13(7), 075005 (2011). [CrossRef]
  6. V. E. Ferry, J. N. Munday, and H. A. Atwater, “Design considerations for plasmonic photovoltaics,” Adv. Mater. (Deerfield Beach Fla.)22(43), 4794–4808 (2010). [CrossRef] [PubMed]
  7. N. Liu, M. Mesch, T. Weiss, M. Hentschel, and H. Giessen, “Infrared perfect absorber and its application as plasmonic sensor,” Nano Lett.10(7), 2342–2348 (2010). [CrossRef] [PubMed]
  8. W. Q. Hu, E. J. Liang, P. Ding, G. W. Cai, and Q. Z. Xue, “Surface plasmon resonance and field enhancement in #-shaped gold wires metamaterial,” Opt. Express17(24), 21843–21849 (2009). [CrossRef] [PubMed]
  9. X. Li, L. Y. Yang, C. G. Hu, X. G. Luo, and M. H. Hong, “Tunable bandwidth of band-stop filter by metamaterial cell coupling in optical frequency,” Opt. Express19(6), 5283–5289 (2011). [CrossRef] [PubMed]
  10. N. I. Landy, C. M. Bingham, T. Tyler, N. Jokerst, D. R. Smith, and W. J. Padilla, “Design, theory, and measurement of a polarization-insensitive absorber for terahertz imaging,” Phys. Rev. B79(12), 125104 (2009). [CrossRef]
  11. X. L. Liu, T. Tyler, T. Starr, A. F. Starr, N. M. Jokerst, and W. J. Padilla, “Taming the blackbody with infrared metamaterials as selective thermal emitters,” Phys. Rev. Lett.107(4), 045901 (2011). [CrossRef] [PubMed]
  12. H. Tao, C. M. Bingham, A. C. Strikwerda, D. Pilon, D. Shrekenhamer, N. I. Landy, K. Fan, X. Zhang, W. J. Padilla, and R. D. Averitt, “Highly flexible wide angle of incidence terahertz metamaterial absorber: Design, fabrication and characterization,” Phys. Rev. B78(24), 241103 (2008). [CrossRef]
  13. X. L. Liu, T. Starr, A. F. Starr, and W. J. Padilla, “Infrared spatial and frequency selective metamaterial with near-unity absorbance,” Phys. Rev. Lett.104(20), 207403 (2010). [CrossRef] [PubMed]
  14. J. M. Hao, J. Wang, X. L. Liu, W. J. Padilla, L. Zhou, and M. Qiu, “High performance optical absorber based on a plasmonic metamaterial,” Appl. Phys. Lett.96(25), 251104 (2010). [CrossRef]
  15. Q. Y. Wen, H. W. Zhang, Y. S. Xie, Q. H. Yang, and Y. L. Liu, “Dual band terahertz metamaterial absorber: Design, fabrication and characterization,” Appl. Phys. Lett.95(24), 241111 (2009). [CrossRef]
  16. C. G. Hu, X. Li, Q. Feng, X. N. Chen, and X. G. Luo, “Investigation on the role of the dielectric loss in metamaterial absorber,” Opt. Express18(7), 6598–6603 (2010). [CrossRef] [PubMed]
  17. C. G. Hu, Z. Y. Zhao, X. N. Chen, and X. G. Luo, “Realizing near-perfect absorption at visible frequencies,” Opt. Express17(13), 11039–11044 (2009). [CrossRef] [PubMed]
  18. C. G. Hu, L. Y. Liu, Z. Y. Zhao, X. N. Chen, and X. G. Luo, “Mixed plasmons coupling for expanding the bandwidth of near-perfect absorption at visible frequencies,” Opt. Express17(19), 16745–16749 (2009). [CrossRef] [PubMed]
  19. J. P. Guo, Y. Zou, H. S. Leong, and B. Y. Zhang, “Multiplexed Nanostructure Metamaterial for Wide Spectral and Perfect Light Absorption,” in Photonic Metamaterials and Plasmonics, OSA Technical Digest (CD), paper MWB4 (2010).
  20. H. Wakatsuchi, S. Greedy, C. Christopoulos, and J. Paul, “Customised broadband metamaterial absorbers for arbitrary polarisation,” Opt. Express18(21), 22187–22198 (2010). [CrossRef] [PubMed]
  21. T. T. Yeh, S. Genovesi, A. Monorchio, E. Prati, F. Costa, T. Y. Huang, and T. J. Yen, “Ultra-broad and sharp-transition bandpass terahertz filters by hybridizing multiple resonances mode in monolithic metamaterials,” Opt. Express20(7), 7580–7589 (2012). [CrossRef] [PubMed]
  22. A. Tittl, P. Mai, R. Taubert, D. Dregely, N. Liu, and H. Giessen, “Palladium-based plasmonic perfect absorber in the visible wavelength range and its application to hydrogen sensing,” Nano Lett.11(10), 4366–4369 (2011). [CrossRef] [PubMed]
  23. C. Wu and G. Shvets, “Design of metamaterial surfaces with broadband absorbance,” Opt. Lett.37(3), 308–310 (2012). [CrossRef] [PubMed]
  24. Y. H. Liu, S. Gu, C. R. Luo, and X. P. Zhao, “Ultra-thin broadband metamaterial absorber,” Appl. Phys., A Mater. Sci. Process. (2012), doi:. [CrossRef]
  25. W. R. Zhu, Y. J. Huang, I. D. Rukhlenko, G. J. Wen, and M. Premaratne, “Configurable metamaterial absorber with pseudo wideband spectrum,” Opt. Express20(6), 6616–6621 (2012). [CrossRef] [PubMed]
  26. J. Grant, Y. Ma, S. Saha, A. Khalid, and D. R. S. Cumming, “Polarization insensitive, broadband terahertz metamaterial absorber,” Opt. Lett.36(17), 3476–3478 (2011). [CrossRef] [PubMed]
  27. J. Hendrickson, J. P. Guo, B. Y. Zhang, W. Buchwald, and R. Soref, “Wideband perfect light absorber at midwave infrared using multiplexed metal structures,” Opt. Lett.37(3), 371–373 (2012). [CrossRef] [PubMed]
  28. G. Dolling, C. Enkrich, M. Wegener, J. F. Zhou, C. M. Soukoulis, and S. Linden, “Cut-wire pairs and plate pairs as magnetic atoms for optical metamaterials,” Opt. Lett.30(23), 3198–3200 (2005). [CrossRef] [PubMed]
  29. D. A. Powell, I. V. Shadrivov, and Y. S. Kivshar, “Cut-wire-pair structures as two-dimensional magnetic metamaterials,” Opt. Express16(19), 15185–15190 (2008). [CrossRef] [PubMed]
  30. D. J. Cho, F. Wang, X. Zhang, and Y. R. Shen, “Contribution of the electric quadrupole resonance in optical metamaterials,” Phys. Rev. B78(12), 121101 (2008). [CrossRef]
  31. E. D. Palik, Handbook of Optical Constants of Solids (Academic Press, 1985).
  32. Y. Avitzour, Y. A. Urzhumov, and G. Shvets, “Wide-angle infrared absorber based on a negative-index plasmonic metamaterial,” Phys. Rev. B79(4), 045131 (2009). [CrossRef]
  33. D. R. Smith and S. Schultz, “Determination of effective permittivity and permeability of metamaterials from reflection and transmission coefficients,” Phys. Rev. B65(19), 195104 (2002). [CrossRef]
  34. D. R. Smith, D. C. Vier, T. Koschny, and C. M. Soukoulis, “Electromagnetic parameter retrieval from inhomogeneous metamaterials,” Phys. Rev. E Stat. Nonlin. Soft Matter Phys.71(33 Pt 2B), 036617 (2005). [CrossRef] [PubMed]
  35. J. N. He, G. W. Cai, P. Ding, C. Z. Fan, and E. J. Liang, “Surface plasmons coupling for local field enhancement in nanoring arrays on a metallic film,” Phys. Express2, 10 (2012).
  36. N. Liu, T. Weiss, M. Mesch, L. Langguth, U. Eigenthaler, M. Hirscher, C. Sönnichsen, and H. Giessen, “Planar metamaterial analogue of electromagnetically induced transparency for plasmonic sensing,” Nano Lett.10(4), 1103–1107 (2010). [CrossRef] [PubMed]

Cited By

Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.


« Previous Article  |  Next Article »

OSA is a member of CrossRef.

CrossCheck Deposited