Power-efficient III-V/Silicon external cavity DBR lasers

doi:10.1364/OE.20.023456

Power-efficient III-V/Silicon external cavity DBR lasers

A. J. Zilkie, P. Seddighian, B. J. Bijlani, W. Qian, D. C. Lee, S. Fathololoumi, J. Fong, R. Shafiiha, D. Feng, B. J. Luff, X. Zheng, J. E. Cunningham, A. V. Krishnamoorthy, and M. Asghari »View Author Affiliations

Optics Express, Vol. 20, Issue 21, pp. 23456-23462 (2012)
http://dx.doi.org/10.1364/OE.20.023456

View Full Text Article

Acrobat PDF (1183 KB)

Journal Search
Article Lookup

Article Tools

Citations

Alert me when this article is cited
Export Citation/Save

Article Navigation

▸ Article Outline
– Abstract
1. Introduction
2. Sample structures and fabrication
3. Bragg grating design
4. Experimental results and discussion
5. Conclusion
– References and links

Article Tools
Full Text
Article Info
References
Cited By
Figures
Metrics
Download PDF

Viewing Equations in the
HTML Article

Optimal Viewing Recommendations

Full Text
Article Info
References (20)
Cited By
Figures (5)
Metrics

Abstract

We report the design and characterization of external-cavity DBR lasers built with a III-V-semiconductor reflective-SOA with spot-size converter edge-coupled to SOI waveguides containing Bragg grating mirrors. The un-cooled lasers have wall-plug-efficiencies of up to 9.5% at powers of 6 mW. The lasers are suitable for making power efficient, hybrid WDM transmitters in a CMOS-compatible SOI optical platform.

1. Introduction

Silicon photonics is rapidly emerging as a key technology in the realization of low-cost, high performance components that can be used to meet the ever-increasing demands for bandwidth in optical communications systems, data center networks, and microprocessor optical interconnects [1

R. A. Soref, “The past, present, and future of silicon photonics,” IEEE J. Sel. Top. Quant. 12(6), 1678–1687 (2006). [CrossRef]

–3

A. V. Krishnamoorthy, Ron Ho, H. Xuezhe Zheng, Schwetman, P. Jon Lexau, Koka, I. GuoLiang Li, Shubin, and J. E. Cunningham, “Computer systems based on silicon photonic interconnects,” Proc. IEEE 97(7), 1337–1361 (2009). [CrossRef]

]. Wavelength-division-multiplexing (WDM) offers high-bandwidth, high-density, and inherent parallelism in these systems and therefore is of interest for scaling optical solutions to meet advanced needs. We have been engaged in the development of a complete suite of low-power-consumption and high-density WDM transceiver and transport technologies suitable for meeting these needs on a 3-micron SOI platform [4

M. Asghari and A. V. Krishnamoorthy, “Silicon photonics: Energy-efficient communication,” Nat. Photonics 5(5), 268–270 (2011). [CrossRef]

, 5

A. V. Krishnamoorthy, K. W. Goossen, W. Jan, X. Zheng, R. Ho, G. Li, R. Rozier, F. Liu, D. Patil, J. Lexau, H. Schwetman, D. Feng, M. Asghari, T. Pinguet, and J. E. Cunningham, “Progress in low-power switched optical interconnects,” IEEE J. Sel. Top. Quant. 17(2), 357–376 (2011). [CrossRef]

In the absence of practically efficient lasers achievable directly in Silicon (Si) or other group IV materials, Si-photonic transmitter sources must be made by hybrid integration with III/V gain materials. External-cavity (EC) lasers are well suited for making stable, bandwidth- and wavelength-controlled WDM lasers. Single-mode EC lasers with sufficiently narrow linewidth for a data link can be made either in distributed-feedback (DFB) or distributed-Bragg-reflector (DBR) configurations. However, the power efficiency of the laser source is now one of the key requirements driving technology selection, as it is becoming a significant portion of the energy cost-per-bit in data transmission. DBR lasers are inherently more power efficient as the optical losses within the laser cavity and the electrical resistance are inherently lower. The EC architecture using separate gain and passive chips also allows for the flexibility to optimize the grating mirror reflectance, bandwidth, and laser cavity length in the passive chip, and optimize the loss and efficiency in gain material, independently from each other.

To date, Si-photonic or PLC-based hybrid-integrated DBR lasers reported recently have had wall-plug-efficiencies (WPEs) ranging from ~1% to 6.2% [6

G. D. Maxwell, R. Kashyap, G. Sherlock, J. V. Collins, and B. J. Ainslie, “Demonstration of a semiconductor external cavity laser using a UV written grating in a planar silica waveguide,” Electron. Lett. 30(18), 1486–1487 (1994). [CrossRef]

–14

M. Lamponi, S. Keyvaninia, C. Jany, F. Poingt, F. Lelarge, G. de Valicourt, G. Roelkens, D. Van Thourhout, S. Messaoudene, J.-M. Fedeli, and G. H. Duan, “Low-threshold heterogeneously integrated InP/SOI lasers with a double adiabatic taper coupler,” IEEE Photonic Tech. L. 24(1), 76–78 (2012). [CrossRef]

]. Here, we report design and experiment details on proof-of-concept hybrid EC continuous-wave (CW) DBR lasers [15

A. J. Zilkie, B. J. Bijlani, P. Seddighian, W. Qian, D. C. Lee, R. Shafiiha, D. Feng, B. J. Luff, X. Zheng, J. E. Cunningham, A. V. Krishnamoorthy, and M. Asghari, “High-efficiency hybrid III-V/Si external cavity DBR laser for 3-µm SOI waveguides,”in IEEE 9th International Conference on Proceedings of Group IV Photonics, (IEEE, 2012), pp. 317–319.

], with up to 9.5% waveguide-coupled WPE, made by butt-coupling a III-V reflective-SOA (RSOA) chip with spot-size converter to passive 3-µm-platform silicon-on-insulator (SOI) chips containing Bragg grating mirrors of varying lengths. Flip-chip-integrated versions of these lasers are suitable for integration with our other passive and active high-speed devices built on the 3 µm SOI platform [16

N.-N. Feng, D. Feng, S. Liao, X. Wang, P. Dong, H. Liang, C.-C. Kung, W. Qian, J. Fong, R. Shafiiha, Y. Luo, J. E. Cunningham, A. V. Krishnamoorthy, and M. Asghari, “30GHz Ge electro-absorption modulator integrated with 3µm silicon waveguide,” Opt. Express 19(8), 7062–7067 (2011). [CrossRef]

,17

D. Feng, S. Liao, P. Dong, N.-N. Feng, H. Liang, D. Zheng, C.-C. Kung, J. Fong, R. Shafiiha, J. E. Cunningham, A. V. Krishnamoorthy, and M. Asghari, “High-speed Ge photodetector monolithically integrated with large cross-section silicon-on-insulator waveguide,” Appl. Phys. Lett. 95(26), 261105 (2009). [CrossRef]

] to create a power-efficient, compact Si-photonic WDM transceiver chip.

2. Sample structures and fabrication

The RSOA gain chip was a 600-µm-long buried-heterostructure (BH) bulk InGaAsP/InP amplifier with horizontal spot-size converting tapers on both ends. The tapers produce an expanded mode with an electric-field 1/e diameter of 3 µm, symmetric in both vertical and horizontal directions, which is well matched to the SOI waveguide. The back facet of the RSOA was HR coated to be 90-95% reflective. At the front facet, the BH waveguide was bent at an angle of 10 degrees to the facet normal, and the facet was AR coated, to minimize the intensity of back-reflected light. The RSOA chip was bonded to a carrier with front end protruding off of the carrier.

The Si passive chip was fabricated on a SOI platform with a 3-μm-thick Si layer and 0.4-μm-thick buried oxide layer. The waveguide height, width, and slab thickness are

H = 3

µm,

W = 2.6

µm, and

s = 1.8

µm, respectively (see Fig. 1a ). The SOI ridge waveguide was tilted 9.3 degrees with respect to the polished facet at the input (on the RSOA side), to match the emission angle of the RSOA. The SOI facet was also anti-reflection (AR) coated for the off-normal incidence angle to minimize the back reflection. The waveguide facet at the laser output side was normal to the polished chip surface and normal-incidence AR-coated. The SOI and RSOA waveguides were single-moded in all regions.

Fig. 1 Schematic of the cross section (a) and side view (b) of the gratings formed in the SOI ridge waveguide.

3. Bragg grating design

The Bragg gratings are formed by a periodic corrugation on top of the ridge waveguide (see Fig. 1b). The grating period Λ of 224.9 nm has been chosen based on the Bragg condition

Λ = λ_{0} / 2 {\bar{n}}_{e f f},

for a passband center wavelength at

λ_{0} = 1556.8

nm [18

W. Streifer, D. R. Scifres, and R. Burnham, “Coupling coefficients for distributed feedback single- and double-heterostructure diode lasers,” IEEE J. Quantum Electron. 11(11), 867–873 (1975). [CrossRef]

]. Here,

{\bar{n}}_{e f f} = (n_{1} - n_{2}) d / Λ + n_{2},

where

d

is the mark width,

n_{1}

is the effective index of the unperturbed ridge waveguide of height

H

and

n_{2}

is the effective index of the etched waveguide of height

H - t .

The duty cycle

d / Λ

of the gratings is 84%.

Coupled mode theory has been used to design the grating in terms of the length

L

and etch depth

t

for the desired bandwidth and reflectivity [18

]. The reflectance spectrum of the grating is given as:

R = \frac{{| κ |}^{2} \sin h^{2} s L}{s^{2} \cos h^{2} s L + {(Δ β / 2)}^{2} \sin h^{2} s L},

(1)

where

s = \sqrt{{| κ |}^{2} - {(β - β_{0})}^{2}},

β = 2 π {\bar{n}}_{e f f} / λ,

β_{0} = 2 π {\bar{n}}_{e f f} / λ_{0},

and

Δ β = 2 (β - β_{0}) .

The coupling coefficient in Eq. (1) can be obtained as:

κ = \frac{π}{λ_{0} {\bar{n}}_{e f f}} \frac{\int_{W a v e g u i d e}^{} \int (n_{1}^{2} - n_{2}^{2}) E^{2} d x d y}{\int_{- \infty}^{+ \infty} \int E^{2} d x d y} .

(2)

Here,

E

is the TE polarized electric field in the unperturbed waveguide. The electric field and the effective refractive indexes for our design have been calculated using RSoft BeamPROP simulation software. Higher etch depths increases the refractive index perturbation

(n_{1}^{2} - n_{2}^{2})

resulting in a stronger grating with higher reflectance and larger bandwidth.

For the laser demonstrations we have fabricated Bragg gratings of

t = 0.28

µm etch depth having three different lengths L = 0.7, 1, and 1.5 mm. The grating bandwidth decreases for larger lengths, and the maximum reflectivity increases. The 3-dB bandwidths are 0.46, 0.34, and 0.25 nm, and the maximum peak reflectances are −8.6, −5.5, and −3 dB, for gratings A, B, and C, respectively (Fig. 2 ). The Bragg gratings were located 0.24 mm from the input facet of the chip, such that when the RSOA is edge-coupled to the SOI waveguide, the effective laser cavity length is 1.4 mm, creating longitudinal modes with a free-spectral-range (FSR) of 0.25 nm.

Fig. 2 Bragg grating reflectance spectra for different grating lengths, (a) Grating A, L = 0.7 mm, (b) Grating B, L = 1 mm, and (c) Grating C, L = 1.5 mm. Solid lines: measured; dashed lines: simulated.

The grating reflectance spectra were characterized with an ASE source connected to a fiber circulator collecting back-reflected light. Figure 2 compares the measured spectra (solid lines) with the simulated spectra (dashed lines). There is a good match between measured and simulated spectra for reflectances above the −23 dB sensitivity floor of the measurement.

4. Experimental results and discussion

Lasing experiments were performed by mounting the RSOA chip-on-carrier and Si passive chips on precision 6-axis alignment stages, and edge coupling the two waveguides, as shown in Fig. 3(a) . Alignment for optimum coupling was found by maximizing the lasing power above threshold. Emission from the laser at the output of each passive chip was collected with a lensed fiber mounted on a third alignment stage. A fiber-optic isolator with isolation of >50 dB was placed between lensed fiber and detector to ensure back-reflected light from sources beyond the output of the Si passive chip are suppressed. The RSOA chip was un-cooled during the experiment. A picture of the RSOA and Si chips after alignment is shown in Fig. 3(b).

Fig. 3 (a) Side-view schematic of experimental setup (not to scale); (b) top-view photograph of experimental setup showing the RSOA gain chip edge-coupled and actively aligned to the SOI passive chip; (c) SEM picture of the grating in the SOI waveguide.

Figure 4(a) shows the light versus current (LI) and voltage versus current (VI) curves measured from the three lasers. The threshold currents were 15.3, 14.0 and 13.0 mA for the lasers with gratings A, B, and C respectively. The kinks in the LI curves are caused by mode-hops, and occur when the preferred longitudinal mode of the cavity jumps to an adjacent mode. This is caused by a cavity optical path length change due to the thermo-optic effect as the laser core temperature rises [11

A. W. Fang, B. R. Koch, R. Jones, E. Lively, Di Liang, Ying-Hao Kuo, and J. E. Bowers “A distributed Bragg reflector silicon evanescent laser,” IEEE Photonic Tech. L. 20(20), 1667–1669 (2008). [CrossRef]

Fig. 4 (a) LIV curves for lasers made with grating A (blue curves), B (green curves), and C (red curves), and (b) wall plug efficiency versus bias current for the laser made with grating A. Solid lines show the measured curves, dashed lines show fits using the model based on Eq. (3), and the dotted line shows the diode voltage.

Figure 4(b) plots the WPE defined as the output optical power divided by the electrical power injected into the RSOA, WPE = Pout/(IbiasVbias), versus bias current, for the three lasers We find that the laser with grating A, the grating with the shortest length L = 0.7 mm, having reflectance of R = 15%, and 3-dB bandwidth of 0.46 nm, produces the highest output power and achieves 9.5% efficiency, while maintaining an SMSR of > 45 dB. 9.5% WPE is achieved at 50 mA with an output power of 6 mW. To our knowledge, this is the highest WPE reported for hybrid Si/III-V guided-wave lasers, and the power level at maximum efficiency is practical for silicon photonic link budgets. The grating A laser also has the fewest and lowest-magnitude kink discontinuities.

We performed modeling of the laser LI curves to quantify the laser physical parameters and LI roll-off characteristics. The output power P_out for our EC laser is related to the RSOA-SOI-waveguide coupling efficiency η and external quantum efficiency η_ext according to [19

K. Kallimani and M. J. O’Mahony, “Calculation of optical power emitted from a fiber grating laser,” IEE Proc., Optoelectron. 145(6), 319–324 (1998). [CrossRef]

,20

M. N. Sysak, H. Park, A. W. Fang, J. E. Bowers, R. Jones, O. Cohen, O. Raday, and M. J. Paniccia, “Experimental and theoretical thermal analysis of a hybrid silicon evanescent laser,” Opt. Express 15(23), 15041–15046 (2007). [CrossRef] [PubMed]

P_{o u t} = η_{e x t} \frac{η (1 - \frac{R_{e f f}}{η^{2}}) \sqrt{R_{r}}}{(1 - R_{e f f}) \sqrt{R_{r}} + (1 - R_{r}) \sqrt{R_{e f f}}} (\frac{h f}{q_{e}}) e^{(- (Z_{T} (P_{D} - P_{o u t}) + T) / T_{1})} (I_{b i a s} - I_{t h} e^{((Z_{T} (P_{D} - P_{o u t}) + T) / T_{0})}),

(3)

where

η_{e x t} = η_{i} \frac{\ln [1 / (R_{r} R_{e f f})]}{2 α L + \ln [1 / (R_{r} R_{e f f})]} \exp (α_{g} L_{g, o u t}),

(4)

R_{e f f} = η^{2} R_{g} .

(5)

Here, R_g is the peak grating reflectance, α, L, α_g, and L_g,out are the effective waveguide scattering loss in the cavity, effective laser cavity length, grating loss, and length of the grating outside the cavity, respectively. R_r is the RSOA rear-facet reflectance, η_i is the RSOA internal quantum efficiency, h is plank's constant, q_e is the elementary charge, and f is the laser frequency. Basic thermal saturation of the laser power is modeled by the terms involving the thermal impedance Z_T and the power absorbed by the RSOA, P_D – P_out, where P_D = I_biasV_bias. The coupling efficiency η was determined to be 2 dB for all three lasers, by fitting Eq. (3) to the measured LI data for all three lasers, keeping the other physical parameters fixed near their estimated values. The saturation of the LI curves at high powers is accounted for by thermal roll-over characterized by the factor Z_T/T₁. The fits approximate well the threshold currents, slope efficiency, and thermal roll-off for the three lasers up to the first mode-hop. More detailed temperature dependence and thermal modeling will be performed on future integrated embodiments.

Figure 5(a) shows the lasing spectra measured at two bias currents for the laser A, overlaid with the grating reflectance spectrum. The spectra were collected with an Optical Spectrum Analyzer (OSA) with a 0.01 nm resolution bandwidth. Figure. 5(b) shows a contour plot of the spectra measured at currents from 20 mA to 150 mA in steps of 5 mA, with the wavelength axis aligned to Fig. 5(a). Lasing occurs between 1556.65 to 1556.9 nm, within the 1-dB passband of the grating. Jumps in the lasing longitudinal mode due to mode hops are clearly observed. The two lasing spectra shown in Fig. 5(a) are at 95 mA, before the first mode hop, and at 100 mA, after the first mode hop. The 3-dB bandwidth of the laser lines seen in Fig. 5(a) are 0.01 nm and are limited by the OSA resolution bandwidth, thus the actual line-width of the laser is expected to be much narrower than 0.01 nm. The inset in Fig. 5(a) shows a zoom-out of the 95-mA lasing spectrum over the entire wavelength range collected by the OSA (8 nm), and no additional lasing modes were observed above the −60 dBm noise floor in wider range scans. This confirms single-mode lasing with an SMSR of >45 dB.

Fig. 5 Lasing spectra versus bias current for laser made with grating A. (a) Lasing spectra collected with OSA at 95 mA (black solid line) and 100 mA (blue dotted line) overlaid with the grating spectrum (green dashed line). Inset: Zoom-out of laser spectrum at 95 mA showing single-mode lasing over 8 nm. (b) contour plot of normalised lasing spectra versus bias current and wavelength, (c) LI curve with bias current range matched to the y-axis of (b).

Figure 5(c) also shows the LI curve for the laser with bias current axis aligned to the contour plot. It can be seen that the LI curve kinks happen near 95 mA and 135 mA, approximately the same currents as the mode hops in Fig. 5(b). Small mismatches between the mode hop currents in the spectra and the kinks in the LI curves are due to the fact that the RSOA chip heats differently during the spectra measurements because they are collected over a slower timescale compared to the LI measurement. We also believe parasitic cavities from non-zero back-reflections from the SOI chip facets play a role in causing the minor LI discontinuities.

A high WPE of 9.5% is achieved in our laser by designing a low output mirror grating reflectance of R = 15% to provide a high slope efficiency, as well as by achieving a low RSOA-Si-chip coupling loss of 2 dB, low waveguide losses of < 0.3 dB/cm and grating losses of < 0.5 dB/mm which result in a low 15 mA threshold. The next-highest WPE of 6.2% (up to 7.5% at 40 mA) recently reported in [8

S. Tanaka, S.-H. Jeong, S. Sekiguchi, T. Kurahashi, Y. Tanaka, and K. Morito, “Highly-efficient, low-noise Si hybrid laser using flip-chip bonded SOA,” in IEEE Proceedings of Optical Interconnects Conference (IEEE, 2012), pp. 12–13.

] used a similar III/V-SOI flip-chip edge-copuled scheme, and also had a low 1.5 dB chip coupling loss, but used a 0.25-μm SOI platform, and required expanding the waveguide modes to 3 µm using spot-size converting tapers in the SOI chip. The slope efficiency in this report is lower compared to our slope efficiency of 0.18 W/A, and therefore their output power and WPE is reduced compared to our laser. In this scheme we believe the spot-size-converter tapers required for expanding the mode adds some inherent cavity loss. The evanescent- and vertical-taper-coupled wafer-bonded hybrid devices which have recently demonstrated WPEs of 1% to 3.5% [11

–14

] also have lower efficiencies because of inherent losses in the evanescent- and taper-coupling regions, as well as lower differential gain because i) the gain region has a lower confinement factor and ii) the full length of the gain material is not used. We thus believe our 3-µm SOI platform is inherently suited for higher efficiency hybrid lasers as no SOI spot-size converters or coupling between multiple layers is required, and the gain region efficiency can be optimized independently from the SOI chip.

5. Conclusion

We have designed and characterized actively-aligned un-cooled III/V-Si external-cavity DBR lasers. We showed single-mode lasing with an SMSR > 45 dB, a 9.5% wall plug efficiency for an output power of 6 mW, and an LI curve with small-magnitude mode-hop discontinuities. This was achieved with a low grating output mirror reflectance of 15%, low 2-dB coupling loss between the RSOA and SOI waveguide, a high RSOA gain, and low waveguide and grating losses. The lasers are suitable for flip-chip hybrid integration into a 3 µm SOI platform to create power-efficient, compact, Si-photonic WDM transceivers.

Acknowledgments

This work is supported in part by DARPA under Agreements HR0011-08-09-0001. The authors thank Dr. Jagdeep Shah of DARPA MTO for his inspiration and support of this program. The views expressed are those of the author and do not reflect the official policy or position of the Department of Defense or the U.S. Government. Approved for public release. Distribution Unlimited.

References and links

1.	R. A. Soref, “The past, present, and future of silicon photonics,” IEEE J. Sel. Top. Quant. 12(6), 1678–1687 (2006). [CrossRef]
2.	B. Jalali and S. Fathpour, “Silicon photonics,” J. Lightwave Technol. 24(12), 4600–4615 (2006). [CrossRef]
3.	A. V. Krishnamoorthy, Ron Ho, H. Xuezhe Zheng, Schwetman, P. Jon Lexau, Koka, I. GuoLiang Li, Shubin, and J. E. Cunningham, “Computer systems based on silicon photonic interconnects,” Proc. IEEE 97(7), 1337–1361 (2009). [CrossRef]
4.	M. Asghari and A. V. Krishnamoorthy, “Silicon photonics: Energy-efficient communication,” Nat. Photonics 5(5), 268–270 (2011). [CrossRef]
5.	A. V. Krishnamoorthy, K. W. Goossen, W. Jan, X. Zheng, R. Ho, G. Li, R. Rozier, F. Liu, D. Patil, J. Lexau, H. Schwetman, D. Feng, M. Asghari, T. Pinguet, and J. E. Cunningham, “Progress in low-power switched optical interconnects,” IEEE J. Sel. Top. Quant. 17(2), 357–376 (2011). [CrossRef]
6.	G. D. Maxwell, R. Kashyap, G. Sherlock, J. V. Collins, and B. J. Ainslie, “Demonstration of a semiconductor external cavity laser using a UV written grating in a planar silica waveguide,” Electron. Lett. 30(18), 1486–1487 (1994). [CrossRef]
7.	T. Tanaka, H. Takahashi, M. Oguma, T. Hashimoto, Y. Hibino, Y. Yamada, Y. Itaya, J. Albert, and K. O. Hill, “Integrated external cavity laser composed of spot-size converted LD and UV written grating in silica waveguide on Si,” Electron. Lett. 32(13), 1202–1203 (1996). [CrossRef]
8.	S. Tanaka, S.-H. Jeong, S. Sekiguchi, T. Kurahashi, Y. Tanaka, and K. Morito, “Highly-efficient, low-noise Si hybrid laser using flip-chip bonded SOA,” in IEEE Proceedings of Optical Interconnects Conference (IEEE, 2012), pp. 12–13.
9.	N. Fujioka, T. Chu, and M. Ishizaka, “Compact and low power consumption hybrid integrated wavelength tunable laser module using silicon waveguide resonators,” J. Lightwave Technol. 28, 3115–3120 (2010).
10.	J.-U. Shin, S. H. Oh, Y.-J. Park, S.-H. Park, Y.-T. Han, H. Sung, and K. R. Oh, “External cavity lasers composed of higher order gratings and SLDs integrated on PLC platform,” ETRI J. 29(4), 452–456 (2007). [CrossRef]
11.	A. W. Fang, B. R. Koch, R. Jones, E. Lively, Di Liang, Ying-Hao Kuo, and J. E. Bowers “A distributed Bragg reflector silicon evanescent laser,” IEEE Photonic Tech. L. 20(20), 1667–1669 (2008). [CrossRef]
12.	H. Park, M. N. Sysak, H.-W. Chen, A. W. Fang, D. Liang, L. Liao, B. R. Koch, J. Bovington, Y. Tang, K. Wong, M. Jacob-Mitos, R. Jones, and J. E. Bowers, “Device and integration technology for silicon photonic transmitters,” IEEE J. Sel. Top. Quant. 17(3), 671–688 (2011). [CrossRef]
13.	B. Ben Bakir, A. Descos, N. Olivier, D. Bordel, P. Grosse, J. L. Gentner, F. Lelarge, and J.-M. Fédéli, “Hybrid Si/III-V lasers with adiabatic coupling,” in Proceedings of IEEE 8th International Conference on Group IV Photonics (IEEE, 2011), pp. 169–171.
14.	M. Lamponi, S. Keyvaninia, C. Jany, F. Poingt, F. Lelarge, G. de Valicourt, G. Roelkens, D. Van Thourhout, S. Messaoudene, J.-M. Fedeli, and G. H. Duan, “Low-threshold heterogeneously integrated InP/SOI lasers with a double adiabatic taper coupler,” IEEE Photonic Tech. L. 24(1), 76–78 (2012). [CrossRef]
15.	A. J. Zilkie, B. J. Bijlani, P. Seddighian, W. Qian, D. C. Lee, R. Shafiiha, D. Feng, B. J. Luff, X. Zheng, J. E. Cunningham, A. V. Krishnamoorthy, and M. Asghari, “High-efficiency hybrid III-V/Si external cavity DBR laser for 3-µm SOI waveguides,”in IEEE 9th International Conference on Proceedings of Group IV Photonics, (IEEE, 2012), pp. 317–319.
16.	N.-N. Feng, D. Feng, S. Liao, X. Wang, P. Dong, H. Liang, C.-C. Kung, W. Qian, J. Fong, R. Shafiiha, Y. Luo, J. E. Cunningham, A. V. Krishnamoorthy, and M. Asghari, “30GHz Ge electro-absorption modulator integrated with 3µm silicon waveguide,” Opt. Express 19(8), 7062–7067 (2011). [CrossRef]
17.	D. Feng, S. Liao, P. Dong, N.-N. Feng, H. Liang, D. Zheng, C.-C. Kung, J. Fong, R. Shafiiha, J. E. Cunningham, A. V. Krishnamoorthy, and M. Asghari, “High-speed Ge photodetector monolithically integrated with large cross-section silicon-on-insulator waveguide,” Appl. Phys. Lett. 95(26), 261105 (2009). [CrossRef]
18.	W. Streifer, D. R. Scifres, and R. Burnham, “Coupling coefficients for distributed feedback single- and double-heterostructure diode lasers,” IEEE J. Quantum Electron. 11(11), 867–873 (1975). [CrossRef]
19.	K. Kallimani and M. J. O’Mahony, “Calculation of optical power emitted from a fiber grating laser,” IEE Proc., Optoelectron. 145(6), 319–324 (1998). [CrossRef]
20.	M. N. Sysak, H. Park, A. W. Fang, J. E. Bowers, R. Jones, O. Cohen, O. Raday, and M. J. Paniccia, “Experimental and theoretical thermal analysis of a hybrid silicon evanescent laser,” Opt. Express 15(23), 15041–15046 (2007). [CrossRef] [PubMed]

OCIS Codes
(060.2380) Fiber optics and optical communications : Fiber optics sources and detectors
(140.5960) Lasers and laser optics : Semiconductor lasers
(200.4650) Optics in computing : Optical interconnects
(250.3140) Optoelectronics : Integrated optoelectronic circuits

ToC Category:
Lasers and Laser Optics

History
Original Manuscript: July 30, 2012
Revised Manuscript: September 19, 2012
Manuscript Accepted: September 19, 2012
Published: September 27, 2012

Citation
A. J. Zilkie, P. Seddighian, B. J. Bijlani, W. Qian, D. C. Lee, S. Fathololoumi, J. Fong, R. Shafiiha, D. Feng, B. J. Luff, X. Zheng, J. E. Cunningham, A. V. Krishnamoorthy, and M. Asghari, "Power-efficient III-V/Silicon external cavity DBR lasers," Opt. Express 20, 23456-23462 (2012)
http://www.opticsinfobase.org/oe/abstract.cfm?URI=oe-20-21-23456

Sort: Author | Year | Journal | Reset

References

R. A. Soref, “The past, present, and future of silicon photonics,” IEEE J. Sel. Top. Quant. 12(6), 1678–1687 (2006). [CrossRef]
B. Jalali and S. Fathpour, “Silicon photonics,” J. Lightwave Technol. 24(12), 4600–4615 (2006). [CrossRef]
A. V. Krishnamoorthy, Ron Ho, H. Xuezhe Zheng, Schwetman, P. Jon Lexau, Koka, I. GuoLiang Li, Shubin, and J. E. Cunningham, “Computer systems based on silicon photonic interconnects,” Proc. IEEE 97(7), 1337–1361 (2009). [CrossRef]
M. Asghari and A. V. Krishnamoorthy, “Silicon photonics: Energy-efficient communication,” Nat. Photonics 5(5), 268–270 (2011). [CrossRef]
A. V. Krishnamoorthy, K. W. Goossen, W. Jan, X. Zheng, R. Ho, G. Li, R. Rozier, F. Liu, D. Patil, J. Lexau, H. Schwetman, D. Feng, M. Asghari, T. Pinguet, and J. E. Cunningham, “Progress in low-power switched optical interconnects,” IEEE J. Sel. Top. Quant. 17(2), 357–376 (2011). [CrossRef]
G. D. Maxwell, R. Kashyap, G. Sherlock, J. V. Collins, and B. J. Ainslie, “Demonstration of a semiconductor external cavity laser using a UV written grating in a planar silica waveguide,” Electron. Lett. 30(18), 1486–1487 (1994). [CrossRef]
T. Tanaka, H. Takahashi, M. Oguma, T. Hashimoto, Y. Hibino, Y. Yamada, Y. Itaya, J. Albert, and K. O. Hill, “Integrated external cavity laser composed of spot-size converted LD and UV written grating in silica waveguide on Si,” Electron. Lett. 32(13), 1202–1203 (1996). [CrossRef]
S. Tanaka, S.-H. Jeong, S. Sekiguchi, T. Kurahashi, Y. Tanaka, and K. Morito, “Highly-efficient, low-noise Si hybrid laser using flip-chip bonded SOA,” in IEEE Proceedings of Optical Interconnects Conference (IEEE, 2012), pp. 12–13.
N. Fujioka, T. Chu, and M. Ishizaka, “Compact and low power consumption hybrid integrated wavelength tunable laser module using silicon waveguide resonators,” J. Lightwave Technol. 28, 3115–3120 (2010).
J.-U. Shin, S. H. Oh, Y.-J. Park, S.-H. Park, Y.-T. Han, H. Sung, and K. R. Oh, “External cavity lasers composed of higher order gratings and SLDs integrated on PLC platform,” ETRI J. 29(4), 452–456 (2007). [CrossRef]
A. W. Fang, B. R. Koch, R. Jones, E. Lively, Di Liang, Ying-Hao Kuo, and J. E. Bowers “A distributed Bragg reflector silicon evanescent laser,” IEEE Photonic Tech. L. 20(20), 1667–1669 (2008). [CrossRef]
H. Park, M. N. Sysak, H.-W. Chen, A. W. Fang, D. Liang, L. Liao, B. R. Koch, J. Bovington, Y. Tang, K. Wong, M. Jacob-Mitos, R. Jones, and J. E. Bowers, “Device and integration technology for silicon photonic transmitters,” IEEE J. Sel. Top. Quant. 17(3), 671–688 (2011). [CrossRef]
B. Ben Bakir, A. Descos, N. Olivier, D. Bordel, P. Grosse, J. L. Gentner, F. Lelarge, and J.-M. Fédéli, “Hybrid Si/III-V lasers with adiabatic coupling,” in Proceedings of IEEE 8th International Conference on Group IV Photonics (IEEE, 2011), pp. 169–171.
M. Lamponi, S. Keyvaninia, C. Jany, F. Poingt, F. Lelarge, G. de Valicourt, G. Roelkens, D. Van Thourhout, S. Messaoudene, J.-M. Fedeli, and G. H. Duan, “Low-threshold heterogeneously integrated InP/SOI lasers with a double adiabatic taper coupler,” IEEE Photonic Tech. L. 24(1), 76–78 (2012). [CrossRef]
A. J. Zilkie, B. J. Bijlani, P. Seddighian, W. Qian, D. C. Lee, R. Shafiiha, D. Feng, B. J. Luff, X. Zheng, J. E. Cunningham, A. V. Krishnamoorthy, and M. Asghari, “High-efficiency hybrid III-V/Si external cavity DBR laser for 3-µm SOI waveguides,”in IEEE 9th International Conference on Proceedings of Group IV Photonics, (IEEE, 2012), pp. 317–319.
N.-N. Feng, D. Feng, S. Liao, X. Wang, P. Dong, H. Liang, C.-C. Kung, W. Qian, J. Fong, R. Shafiiha, Y. Luo, J. E. Cunningham, A. V. Krishnamoorthy, and M. Asghari, “30GHz Ge electro-absorption modulator integrated with 3µm silicon waveguide,” Opt. Express 19(8), 7062–7067 (2011). [CrossRef]
D. Feng, S. Liao, P. Dong, N.-N. Feng, H. Liang, D. Zheng, C.-C. Kung, J. Fong, R. Shafiiha, J. E. Cunningham, A. V. Krishnamoorthy, and M. Asghari, “High-speed Ge photodetector monolithically integrated with large cross-section silicon-on-insulator waveguide,” Appl. Phys. Lett. 95(26), 261105 (2009). [CrossRef]
W. Streifer, D. R. Scifres, and R. Burnham, “Coupling coefficients for distributed feedback single- and double-heterostructure diode lasers,” IEEE J. Quantum Electron. 11(11), 867–873 (1975). [CrossRef]
K. Kallimani and M. J. O’Mahony, “Calculation of optical power emitted from a fiber grating laser,” IEE Proc., Optoelectron. 145(6), 319–324 (1998). [CrossRef]
M. N. Sysak, H. Park, A. W. Fang, J. E. Bowers, R. Jones, O. Cohen, O. Raday, and M. J. Paniccia, “Experimental and theoretical thermal analysis of a hybrid silicon evanescent laser,” Opt. Express 15(23), 15041–15046 (2007). [CrossRef] [PubMed]

Appl. Phys. Lett.

D. Feng, S. Liao, P. Dong, N.-N. Feng, H. Liang, D. Zheng, C.-C. Kung, J. Fong, R. Shafiiha, J. E. Cunningham, A. V. Krishnamoorthy, and M. Asghari, “High-speed Ge photodetector monolithically integrated with large cross-section silicon-on-insulator waveguide,” Appl. Phys. Lett. 95(26), 261105 (2009). [CrossRef]

Electron. Lett.

G. D. Maxwell, R. Kashyap, G. Sherlock, J. V. Collins, and B. J. Ainslie, “Demonstration of a semiconductor external cavity laser using a UV written grating in a planar silica waveguide,” Electron. Lett. 30(18), 1486–1487 (1994). [CrossRef]
T. Tanaka, H. Takahashi, M. Oguma, T. Hashimoto, Y. Hibino, Y. Yamada, Y. Itaya, J. Albert, and K. O. Hill, “Integrated external cavity laser composed of spot-size converted LD and UV written grating in silica waveguide on Si,” Electron. Lett. 32(13), 1202–1203 (1996). [CrossRef]

ETRI J.

J.-U. Shin, S. H. Oh, Y.-J. Park, S.-H. Park, Y.-T. Han, H. Sung, and K. R. Oh, “External cavity lasers composed of higher order gratings and SLDs integrated on PLC platform,” ETRI J. 29(4), 452–456 (2007). [CrossRef]

IEE Proc., Optoelectron.

K. Kallimani and M. J. O’Mahony, “Calculation of optical power emitted from a fiber grating laser,” IEE Proc., Optoelectron. 145(6), 319–324 (1998). [CrossRef]

IEEE J. Quantum Electron.

W. Streifer, D. R. Scifres, and R. Burnham, “Coupling coefficients for distributed feedback single- and double-heterostructure diode lasers,” IEEE J. Quantum Electron. 11(11), 867–873 (1975). [CrossRef]

IEEE J. Sel. Top. Quant.

H. Park, M. N. Sysak, H.-W. Chen, A. W. Fang, D. Liang, L. Liao, B. R. Koch, J. Bovington, Y. Tang, K. Wong, M. Jacob-Mitos, R. Jones, and J. E. Bowers, “Device and integration technology for silicon photonic transmitters,” IEEE J. Sel. Top. Quant. 17(3), 671–688 (2011). [CrossRef]
R. A. Soref, “The past, present, and future of silicon photonics,” IEEE J. Sel. Top. Quant. 12(6), 1678–1687 (2006). [CrossRef]
A. V. Krishnamoorthy, K. W. Goossen, W. Jan, X. Zheng, R. Ho, G. Li, R. Rozier, F. Liu, D. Patil, J. Lexau, H. Schwetman, D. Feng, M. Asghari, T. Pinguet, and J. E. Cunningham, “Progress in low-power switched optical interconnects,” IEEE J. Sel. Top. Quant. 17(2), 357–376 (2011). [CrossRef]

IEEE Photonic Tech. L.

A. W. Fang, B. R. Koch, R. Jones, E. Lively, Di Liang, Ying-Hao Kuo, and J. E. Bowers “A distributed Bragg reflector silicon evanescent laser,” IEEE Photonic Tech. L. 20(20), 1667–1669 (2008). [CrossRef]
M. Lamponi, S. Keyvaninia, C. Jany, F. Poingt, F. Lelarge, G. de Valicourt, G. Roelkens, D. Van Thourhout, S. Messaoudene, J.-M. Fedeli, and G. H. Duan, “Low-threshold heterogeneously integrated InP/SOI lasers with a double adiabatic taper coupler,” IEEE Photonic Tech. L. 24(1), 76–78 (2012). [CrossRef]

J. Lightwave Technol.

Nat. Photonics

M. Asghari and A. V. Krishnamoorthy, “Silicon photonics: Energy-efficient communication,” Nat. Photonics 5(5), 268–270 (2011). [CrossRef]

Opt. Express

Proc. IEEE

A. V. Krishnamoorthy, Ron Ho, H. Xuezhe Zheng, Schwetman, P. Jon Lexau, Koka, I. GuoLiang Li, Shubin, and J. E. Cunningham, “Computer systems based on silicon photonic interconnects,” Proc. IEEE 97(7), 1337–1361 (2009). [CrossRef]

Other

S. Tanaka, S.-H. Jeong, S. Sekiguchi, T. Kurahashi, Y. Tanaka, and K. Morito, “Highly-efficient, low-noise Si hybrid laser using flip-chip bonded SOA,” in IEEE Proceedings of Optical Interconnects Conference (IEEE, 2012), pp. 12–13.
A. J. Zilkie, B. J. Bijlani, P. Seddighian, W. Qian, D. C. Lee, R. Shafiiha, D. Feng, B. J. Luff, X. Zheng, J. E. Cunningham, A. V. Krishnamoorthy, and M. Asghari, “High-efficiency hybrid III-V/Si external cavity DBR laser for 3-µm SOI waveguides,”in IEEE 9th International Conference on Proceedings of Group IV Photonics, (IEEE, 2012), pp. 317–319.
B. Ben Bakir, A. Descos, N. Olivier, D. Bordel, P. Grosse, J. L. Gentner, F. Lelarge, and J.-M. Fédéli, “Hybrid Si/III-V lasers with adiabatic coupling,” in Proceedings of IEEE 8th International Conference on Group IV Photonics (IEEE, 2011), pp. 169–171.

Cited By

Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.

Click here to see a list of articles that cite this paper