OSA's Digital Library

Optics Express

Optics Express

  • Editor: C. Martijn de Sterke
  • Vol. 20, Iss. 25 — Dec. 3, 2012
  • pp: 27361–27366
« Show journal navigation

Luminescence properties, crystal structure and LED package of potential blue-emitting phosphors - Ca2BN2F:Eu2+

Yi-Chen Chiu, Wei-Ren Liu, Chien-Hao Huang, Yao-Tsung Yeh, and Shyue-Ming Jang  »View Author Affiliations


Optics Express, Vol. 20, Issue 25, pp. 27361-27366 (2012)
http://dx.doi.org/10.1364/OE.20.027361


View Full Text Article

Acrobat PDF (1107 KB)





Browse Journals / Lookup Meetings

Browse by Journal and Year


   


Lookup Conference Papers

Close Browse Journals / Lookup Meetings

Article Tools

Share
Citations

Abstract

A blue-emitting phosphor - Ca2BN2F:Eu2+ was synthesized by a solid state reaction. Ca2BN2F crystallizes in the orthorhombic system with space group Pnma (No. 62) and Z = 4. The Ca2BN2F:Eu2+ exhibites broad emission and excitation bands corresponding to the allowed fd electronic transition of Eu2+. Concentration quenching of Eu2+ emission was observed for 1 mol% due to the energy transfer between Eu2+ ions via electric multipolar interaction with the critical transfer distance of about 25.11 Å. In addition, the thermal stability and applications of blue-emitting Ca2BN2F:Eu2+ phosphors in n-UV LED have been firstly discussed in this study. The preliminary data demonstrate that the novel blue-emitting phosphor exhibits the potential to be an n-UV convertible phosphor.

© 2012 OSA

1. Introduction

Recently, there has been a dramatic proliferation in research concerned white light-emitting diodes (wLEDs) because of their merits of long operation lifetime, energy-saving feature, and environmentally friendly characteristics [1

1. S. Ye, F. Xiao, Y. X. Pan, Y. Y. Ma, and Q. Y. Zhang, “Phosphors in phosphor-converted white light-emitting diodes: recent advances in materials, techniques and properties,” Mater. Sci. Eng. Rep. 71(1), 1–34 (2010). [CrossRef]

,2

2. W. B. Im, Y. I. Kim, N. N. Fellows, H. Masui, G. A. Hirata, S. P. DenBaars, and R. Seshadri, “A yellow-emitting Ce3+ phosphor, La1−xCexSr2AlO5, for white light-emitting diodes,” Appl. Phys. Lett. 93(9), 091905 (2008). [CrossRef]

]. Consequently, these superior characteristics may lead to the replacement of as-discharge fluorescent lamps by wLEDs in the near future. In general, there are several approaches to generate white light by using of the LEDs and phosphors. The first one is to generate white light is by using blue-emitting LED chips coated with yellow-emitting phosphor Y3Al5O12:Ce3+ (YAG:Ce3+). However, this typical type of white light suffered from poor color rendering index (CRI) caused by the deficiency of red emission in the visible spectrum. During the past few years, white LEDs fabricated using a near-ultraviolet (n-UV) LED (370-420nm) coupled with red, green, and blue-emitting phosphors have attracted much attention due to excellent CRI and good color stability. Therefore, there is an urgent need to develop new phosphors that can be effectively excited in the near ultraviolet range.

Nitride/oxynitride compounds, such as M2Si5N8 (M = Ca, Sr, Ba)] [3

3. H. A. Höppe, H. Lutz, P. Morys, W. Schnick, and A. Seilmeier, “Luminescence in Eu2+-doped Ba2Si5N8: fluorescence, thermoluminescence, and upconversion,” J. Phys. Chem. Solids 61(12), 2001–2006 (2000). [CrossRef]

,4

4. Y. Q. Li, G. de With, and H. T. Hintzen, “Luminescence properties of Ce3+-activated alkaline earth silicon nitride M2Si5N8 (M = Ca, Sr, Ba) materials,” J. Lumin. 116(1-2), 107–116 (2006). [CrossRef]

], MAlSiN3 (M = Ca, Sr) [5

5. K. Uheda, N. Hirosaki, Y. Yamamoto, A. Naito, T. Nakajima, and H. Yamamotoa, “Luminescence properties of a red phosphor, CaAlSiN3:Eu2+, for white light-emitting diodes,” Electrochem. Solid-State Lett. 9(4), H22–H25 (2006). [CrossRef]

,6

6. H. Watanabe, H. Wada, K. Seki, M. Itou, and N. Kijima, “Synthetic method and luminescence properties of SrxCa1−xAlSiN3:Eu2+ mixed nitride phosphors,” J. Electrochem. Soc. 155(3), F31–F36 (2008). [CrossRef]

], and MSi2O2N2 (M = Ca, Sr, Ba) [7

7. R. S. Liu, Y. H. Liu, N. C. Bagkar, and S. F. Hua, “Enhanced luminescence of SrSi2O2N2:Eu2+ phosphors by codoping with Ce3+, Mn2+, and Dy3+ ions,” Appl. Phys. Lett. 91, 061119 (2007).

,8

8. Y. Q. Li, A. C. A. Delsing, G. de With, and H. T. Hintzen, “Luminescence properties of Eu2+-activated alkaline-earth silicon-oxynitride MSi2O2-δN2+2/3δ (M = Ca, Sr, Ba): a promising class of novel LED conversion phosphors,” Chem. Mater. 17(12), 3242–3248 (2005). [CrossRef]

], produce a strong nephelauxetic effect or large crystal-field splitting, which leads to the unique luminescence such as broad band excitation, long-wavelength emission, high quantum efficiency, and good thermal stability. However, some of these nitride phosphors are hard to synthesize in atmosphere pressure, which causing the high cost. Thus, new nitride-based phosphors for normal pressure are worth to develop. The crystal structure of Ca2BN2F was first reported by Nesper et al. [9

9. F. E. Rohrer and R. Nesper, “M2BN2X (M = Ca, Sr; X = F, Cl): New Halogenide Compounds with Isolated BN23- Units,” J. Solid State Chem. 135(2), 194–200 (1998). [CrossRef]

]. Li et al. reported the electronic structure and photoluminescence properties of Ca2BN2F:Eu2+ [10

10. Y. Q. Li, C. M. Fang, Y. Fang, A. C. A. Delsing, G. de With, and H. T. Hintzen, “Electronic structure and photoluminescence properties of Eu2+ -activated Ca2BN2F,” J. Solid State Chem. 182(12), 3299–3304 (2009). [CrossRef]

]. Nonetheless, few reports have been published on Ca2BN2F:Eu2+ being applied to n-UV LEDs as well as thermal quenching behavior for solid state lighting.

In this paper, we report on the luminescence properties, thermal stability as well as applications of blue-emitting Ca2BN2F:Eu2+ phosphors in the fabrication of a wLED by combination with an n-UV LED. High-quality white light was generated from the white LEDs fabricated from Ca2BN2F:Eu2+. Ca2BN2F:Eu2+ is thus a promising blue-emitting phosphor for n-UV LEDs.

2. Experimental

In study, powder samples of Ca2BN2F:Eu2+ were prepared by a solid-state reaction in where the constituent raw materials Ca3N2 (95%), BN (98%), EuCl2 (99.99%), CaF2(99.99%) (all from Aldrich Chemicals, Milwaukee, WI, U.S.A) were weighed in stoichiometric proportions and intimately ground in the glove box. The powder mixtures were sintered under a reducing atmosphere (15%H2/85%N2) at 1000°C for 8 h with one intermittent regrinding to prevent the possibility of incomplete reaction. The products were then cooled to room temperature in the furnace, ground, and pulverized for further measurements. The phase purity of the as-prepared samples were identified by powder X-ray diffraction (XRD) using a Bruker AXS D8 advanced automatic diffractometer with Cu-Kα radiation (λ = 1.5418 Å) operating at 40 kV and 30 mA. The XRD profiles were collected in the range of 10° < 2θ < 80°. The photoluminescence (PL) and photoluminescence excitation (PLE) spectra were measured at room temperature by a Spex Fluorolog-3 spectrofluorometer (Instruments S.A., N.J., U.S.A) equipped with a 450W Xe light source and double excitation monochromators. The powder samples were compacted and excited and emitted fluorescence was detected by a Hamamatsu Photonics R928 type photomultiplier perpendicular to the excitation beam. The spectral response of the measurement system is calibrated automatically on start up. To eliminate the second-order emission of the source radiation, a cut-off filter was used in the measurements. The Commission International de I’Eclairage (CIE) chromaticity coordinates for all samples were determined by using a Laiko DT-100 color analyzer equipped with a CCD detector (Laiko Co., Tokyo, Japan).

3. Results and discussion

3.1. XRD analysis and crystal structure of as-synthesized Ca2BN2F:Eu2+

Figure 1
Fig. 1 XRD patterns of Ca2BN2F from JCPDS 89-4591 and as-synthesized Ca2BN2F:Eu2+ sample. Inset: Crystal structure of Ca2BN2F.
shows the XRD patterns of as-synthesized Ca2BN2F:Eu2+ and JCPDS standard pattern. The XRD pattern of as-synthesized Ca2BN2F:Eu2+ agrees with that of JCPDS file No. 89-4591. The result indicates that doping of Eu2+ into Ca2BN2F does not generate any impurity phase. According to the single crystal X-ray data reported by Nesper [9

9. F. E. Rohrer and R. Nesper, “M2BN2X (M = Ca, Sr; X = F, Cl): New Halogenide Compounds with Isolated BN23- Units,” J. Solid State Chem. 135(2), 194–200 (1998). [CrossRef]

], Ca2BN2F crystallizes in the orthorhombic system with space group Pnma and with four formula units per unit cell. The dimensions of the unit cell are a = 9.182 Ǻ, b = 3.649 Ǻ, and c = 9.966 Ǻ. The crystal structure consists of tri-BN23- anions and tetra-Ca1(Ca2)3F units. There are two different crystallographic sites for the Ca2+ ions. The Ca1 site is coordinated by five nitrogen ions and one fluorine ion, and another Ca2 site is coordinated by three nitrogen and three fluorine ions. Based on the effective ionic radii (r) of cations with different coordination numbers (CN) as reported by Shannon [11

11. R. D. Shannon, “Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides,” Acta Crystallogr. A 32(5), 751–767 (1976). [CrossRef]

], the ionic radius of Eu2+ (r = 1.17 Å when CN = 6) is close to that of Ca2+ (r = 1.00 Å when CN = 6). Due to size considerations, Eu2+ was expected to occupy the Ca2+ sites and not B3+ sites, which are too small. The lattice constants of undoped Ca2BN2F and Ca2BN2F:5%Eu2+ were determined to be a = 9.15 Ǻ, b = 3.66 Ǻ, c = 9.92 Ǻ and a = 9.18 Ǻ, b = 3.67 Ǻ and c = 9.96 Ǻ, respectively. The lattice constants of a and c slight increased with the increasing the content of Eu2+ concentration.

3.2. Luminescence properties of Ca2BN2F:Eu2+ phosphors

Figure 2
Fig. 2 Excitation and emission spectra of as-synthesized Ca2BN2F:1%Eu2+ phosphor. The inset shows the phosphor under 365 nm excitation in a UV box.
shows the PL and PLE spectra of Ca2BN2F:1%Eu2+. The excitation spectrum consisted of four absorption bands peaking at 337, 352, 365, and 376 nm, which correspond to the transition from the ground state of Eu2+ to its field-splitting levels at the 5d1 state. The sample exhibited a blue-emitting band peaking at 423 nm under optimal excitation at 336 nm. The Stokes shift is the difference between positions of the band maxima of the excitation and emission spectra, and it was estimated to be 6121 cm−1 in Ca2BN2F:1%Eu2+. A broad asymmetric band was observed in the emission spectrum for the wavelength range of 390–530 nm; this can be assigned to the allowed 4f65d1 → 4f7 electronic transitions of Eu2+. Since Eu2+ ions occupied two different Ca2+ sites, the emission band deconvoluted into two individual emission bands centered at 415 nm and 435 nm, which were contributed to CaN3F3 and CaN5F, respectively. The inset of Fig. 2 demonstrates the phosphor excited at 365 nm in the UV box, which gives an intense blue color. The CIE chromaticity coordinate of the Ca2BN2F phosphor is shown in Fig. 3
Fig. 3 CIE chromaticity diagram for Ca2BN2F:1%Eu2+ excited at 336 nm.
. The chromaticity index (x, y) was found to be locate at (0.17, 0.09) for the composition with 1 mol%.

Blasse [12

12. G. Blasse, “Energy transfer in oxidic phosphors,” Philips Res. Rep. 24, 131–144 (1969).

] pointed out that the critical transfer distance (Rc) is approximately equal to twice the radius of a sphere with the volume of the unit cell:
Rc=2[3V4πxcZ]1/3
(1)
Where xc is the critical concentration, Z is the number of formula units per unit cell, and V is the volume of the unit cell. By taking the values of V = 333.9 Ǻ3, Z = 4, and xc = 0.01, the critical transfer distance Rc was found to be ~25.11 Ǻ.

Several phenomena can contribute to non-radiative energy transfer, such as exchange interaction, radiation reabsorption, or electric multipolar interaction. Exchange interaction is observed in the forbidden transitions, and it requires a large direct or indirect overlap of the wavefunctions of the donor and acceptor. The critical distance for the exchange interaction is approximately 5 Ǻ [13

13. D. L. Dexter, “A theory of sensitized luminescence in solids,” J. Chem. Phys. 21(5), 836–850 (1953). [CrossRef]

]. The exchange mechanism plays no role in the energy transfer within the Ca2BN2F:Eu2+ phosphors because the 4f7→ 4f65d1 transition of Eu2+ is allowed transition. The mechanism of radiation reabsorption is only effective when the fluorescence spectra are broadly overlapping. Therefore, radiation reabsorption does not occur in this case. The process of energy transfer between Eu2+ ions in the Ca2BN2F:Eu2+ phosphor was ascribed to the electric multipolar interaction, as suggested by Dexter [13

13. D. L. Dexter, “A theory of sensitized luminescence in solids,” J. Chem. Phys. 21(5), 836–850 (1953). [CrossRef]

].

The temperature dependence of the PL intensity of Ca2BN2F:Eu2+ under excitation at 336 nm and above room temperature is shown in Fig. 5
Fig. 5 Thermal quenching of Ca2BN2F:1%Eu2+ excited at 336 nm. Inset: Normalized PL intensity of Ca2BN2F:1%Eu2+ as a function of temperature.
. The activation energy (Ea) can be expressed by
ln(IoI)=lnAEakT,
(2)
where Io and I are the luminescence intensity of Ca2BN2F:Eu2+ at room temperature and the testing temperature, respectively; A is a constant, and k is Boltzmann’s constant (8.617 × 10−5 eV K−1). Ea was found to be 0.1201 eV. The PL intensity of Ca2BN2F:Eu2+ at 100°C and 150°C was 60% and 25% of that measured at room temperature, respectively. The thermal stability of Ca2BN2F:Eu2+ phosphor was not so good as compared to that of other nitride phosphors. The emission spectra of the phosphor do not shift as the temperature increases, indicative of its high stability of chromaticity against temperature.

3.3 LED package tests

The white LED was successfully fabricated by combining the n-UV chip (370 nm) and the Ca2BN2F:Eu2+, (Ba,Sr)2SiO4:Eu2+ and CaAlSiN3:Eu2+ phosphors. The electroluminescent (EL) spectrum and the corresponding LED image are shown in Fig. 6
Fig. 6 EL spectrum of the white LED composed of GaN-based n-UV-LED (370 nm) and Ca2BN2F:Eu2+ (blue), (Ba,Sr)2SiO4:Eu2+ (green) and CaAlSiN3:Eu2+ (red) phosphors driven by a 350-mA current.
. The CIE color coordinates and correlated color temperature (Tc) of the white LED were found to be (0.338, 0.337) and 5235 K, respectively. The average color-rendering index Ra was determined to be as high as 90.2, which was excellent for lighting applications. The inset of Fig. 6 shows the appearance of a well-packaged LED lamp in operation. Ca2BN2F:Eu2+ is a suitable blue-emitting phosphor for use in white LEDs.

4. Conclusions

In summary, a blue-emitting Ca2BN2F:Eu2+ phosphor is reported. The energy transfer between Eu2+ ions in Ca2BN2F occurred via electric multipolar interaction, and the critical transfer distance was 25.11 Å. The white LEDs fabricated with an n-UV chip, green/red phosphors and Ca2BN2F:Eu2+ generate white light with a high color rendering index (Ra = 90.2). Eu2+-activated phosphors can be used for n-UV convertible blue-emitting phosphors.

Acknowledgments

The work is financially supported from ITRI under contract no. B352A31440 and NSC contract no. 101-2218-E-033-001.

References and links

1.

S. Ye, F. Xiao, Y. X. Pan, Y. Y. Ma, and Q. Y. Zhang, “Phosphors in phosphor-converted white light-emitting diodes: recent advances in materials, techniques and properties,” Mater. Sci. Eng. Rep. 71(1), 1–34 (2010). [CrossRef]

2.

W. B. Im, Y. I. Kim, N. N. Fellows, H. Masui, G. A. Hirata, S. P. DenBaars, and R. Seshadri, “A yellow-emitting Ce3+ phosphor, La1−xCexSr2AlO5, for white light-emitting diodes,” Appl. Phys. Lett. 93(9), 091905 (2008). [CrossRef]

3.

H. A. Höppe, H. Lutz, P. Morys, W. Schnick, and A. Seilmeier, “Luminescence in Eu2+-doped Ba2Si5N8: fluorescence, thermoluminescence, and upconversion,” J. Phys. Chem. Solids 61(12), 2001–2006 (2000). [CrossRef]

4.

Y. Q. Li, G. de With, and H. T. Hintzen, “Luminescence properties of Ce3+-activated alkaline earth silicon nitride M2Si5N8 (M = Ca, Sr, Ba) materials,” J. Lumin. 116(1-2), 107–116 (2006). [CrossRef]

5.

K. Uheda, N. Hirosaki, Y. Yamamoto, A. Naito, T. Nakajima, and H. Yamamotoa, “Luminescence properties of a red phosphor, CaAlSiN3:Eu2+, for white light-emitting diodes,” Electrochem. Solid-State Lett. 9(4), H22–H25 (2006). [CrossRef]

6.

H. Watanabe, H. Wada, K. Seki, M. Itou, and N. Kijima, “Synthetic method and luminescence properties of SrxCa1−xAlSiN3:Eu2+ mixed nitride phosphors,” J. Electrochem. Soc. 155(3), F31–F36 (2008). [CrossRef]

7.

R. S. Liu, Y. H. Liu, N. C. Bagkar, and S. F. Hua, “Enhanced luminescence of SrSi2O2N2:Eu2+ phosphors by codoping with Ce3+, Mn2+, and Dy3+ ions,” Appl. Phys. Lett. 91, 061119 (2007).

8.

Y. Q. Li, A. C. A. Delsing, G. de With, and H. T. Hintzen, “Luminescence properties of Eu2+-activated alkaline-earth silicon-oxynitride MSi2O2-δN2+2/3δ (M = Ca, Sr, Ba): a promising class of novel LED conversion phosphors,” Chem. Mater. 17(12), 3242–3248 (2005). [CrossRef]

9.

F. E. Rohrer and R. Nesper, “M2BN2X (M = Ca, Sr; X = F, Cl): New Halogenide Compounds with Isolated BN23- Units,” J. Solid State Chem. 135(2), 194–200 (1998). [CrossRef]

10.

Y. Q. Li, C. M. Fang, Y. Fang, A. C. A. Delsing, G. de With, and H. T. Hintzen, “Electronic structure and photoluminescence properties of Eu2+ -activated Ca2BN2F,” J. Solid State Chem. 182(12), 3299–3304 (2009). [CrossRef]

11.

R. D. Shannon, “Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides,” Acta Crystallogr. A 32(5), 751–767 (1976). [CrossRef]

12.

G. Blasse, “Energy transfer in oxidic phosphors,” Philips Res. Rep. 24, 131–144 (1969).

13.

D. L. Dexter, “A theory of sensitized luminescence in solids,” J. Chem. Phys. 21(5), 836–850 (1953). [CrossRef]

OCIS Codes
(160.2540) Materials : Fluorescent and luminescent materials
(250.5230) Optoelectronics : Photoluminescence
(300.6280) Spectroscopy : Spectroscopy, fluorescence and luminescence

ToC Category:
Optoelectronics

History
Original Manuscript: August 16, 2012
Revised Manuscript: October 19, 2012
Manuscript Accepted: October 23, 2012
Published: November 21, 2012

Citation
Yi-Chen Chiu, Wei-Ren Liu, Chien-Hao Huang, Yao-Tsung Yeh, and Shyue-Ming Jang, "Luminescence properties, crystal structure and LED package of potential blue-emitting phosphors - Ca2BN2F:Eu2+," Opt. Express 20, 27361-27366 (2012)
http://www.opticsinfobase.org/oe/abstract.cfm?URI=oe-20-25-27361


Sort:  Author  |  Year  |  Journal  |  Reset  

References

  1. S. Ye, F. Xiao, Y. X. Pan, Y. Y. Ma, and Q. Y. Zhang, “Phosphors in phosphor-converted white light-emitting diodes: recent advances in materials, techniques and properties,” Mater. Sci. Eng. Rep.71(1), 1–34 (2010). [CrossRef]
  2. W. B. Im, Y. I. Kim, N. N. Fellows, H. Masui, G. A. Hirata, S. P. DenBaars, and R. Seshadri, “A yellow-emitting Ce3+ phosphor, La1−xCexSr2AlO5, for white light-emitting diodes,” Appl. Phys. Lett.93(9), 091905 (2008). [CrossRef]
  3. H. A. Höppe, H. Lutz, P. Morys, W. Schnick, and A. Seilmeier, “Luminescence in Eu2+-doped Ba2Si5N8: fluorescence, thermoluminescence, and upconversion,” J. Phys. Chem. Solids61(12), 2001–2006 (2000). [CrossRef]
  4. Y. Q. Li, G. de With, and H. T. Hintzen, “Luminescence properties of Ce3+-activated alkaline earth silicon nitride M2Si5N8 (M = Ca, Sr, Ba) materials,” J. Lumin.116(1-2), 107–116 (2006). [CrossRef]
  5. K. Uheda, N. Hirosaki, Y. Yamamoto, A. Naito, T. Nakajima, and H. Yamamotoa, “Luminescence properties of a red phosphor, CaAlSiN3:Eu2+, for white light-emitting diodes,” Electrochem. Solid-State Lett.9(4), H22–H25 (2006). [CrossRef]
  6. H. Watanabe, H. Wada, K. Seki, M. Itou, and N. Kijima, “Synthetic method and luminescence properties of SrxCa1−xAlSiN3:Eu2+ mixed nitride phosphors,” J. Electrochem. Soc.155(3), F31–F36 (2008). [CrossRef]
  7. R. S. Liu, Y. H. Liu, N. C. Bagkar, and S. F. Hua, “Enhanced luminescence of SrSi2O2N2:Eu2+ phosphors by codoping with Ce3+, Mn2+, and Dy3+ ions,” Appl. Phys. Lett.91, 061119 (2007).
  8. Y. Q. Li, A. C. A. Delsing, G. de With, and H. T. Hintzen, “Luminescence properties of Eu2+-activated alkaline-earth silicon-oxynitride MSi2O2-δN2+2/3δ (M = Ca, Sr, Ba): a promising class of novel LED conversion phosphors,” Chem. Mater.17(12), 3242–3248 (2005). [CrossRef]
  9. F. E. Rohrer and R. Nesper, “M2BN2X (M = Ca, Sr; X = F, Cl): New Halogenide Compounds with Isolated BN23- Units,” J. Solid State Chem.135(2), 194–200 (1998). [CrossRef]
  10. Y. Q. Li, C. M. Fang, Y. Fang, A. C. A. Delsing, G. de With, and H. T. Hintzen, “Electronic structure and photoluminescence properties of Eu2+ -activated Ca2BN2F,” J. Solid State Chem.182(12), 3299–3304 (2009). [CrossRef]
  11. R. D. Shannon, “Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides,” Acta Crystallogr. A32(5), 751–767 (1976). [CrossRef]
  12. G. Blasse, “Energy transfer in oxidic phosphors,” Philips Res. Rep.24, 131–144 (1969).
  13. D. L. Dexter, “A theory of sensitized luminescence in solids,” J. Chem. Phys.21(5), 836–850 (1953). [CrossRef]

Cited By

Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.


« Previous Article  |  Next Article »

OSA is a member of CrossRef.

CrossCheck Deposited