High-efficiency terahertz pulse generation via optical rectification by suppressing stimulated Raman scattering process

doi:10.1364/OE.20.006509

« Show journal navigation

High-efficiency terahertz pulse generation via optical rectification by suppressing stimulated Raman scattering process

Masaya Nagai, Eiichi Matsubara, and Masaaki Ashida »View Author Affiliations

Optics Express, Vol. 20, Issue 6, pp. 6509-6514 (2012)
http://dx.doi.org/10.1364/OE.20.006509

View Full Text Article

Acrobat PDF (697 KB)

Journal Search
Article Lookup

Article Tools

Citations

Alert me when this article is cited
Export Citation/Save

Article Navigation

▸ Article Outline
– Abstract
1. Introduction
2. Experimental setup
3. Experiments and discussions
4. Conclusions
– References and links

Article Tools
Full Text
Article Info
References
Cited By
Figures
Metrics
Download PDF

Viewing Equations in the
HTML Article

Optimal Viewing Recommendations

Full Text
Article Info
References (30)
Cited By
Figures (3)
Metrics

Abstract

We experimentally demonstrate high-efficiency terahertz pulse generation via optical rectification in LiNbO₃. The spectral broadening of an excitation pulse via the stimulated Raman scattering process coincides with high-efficiency terahertz pulse generation, which enhances undesired stretching of the excitation pulse owing to the very high group velocity dispersion in LiNbO₃. We avoid this by the bandwidth control of the excitation pulse and achieve the highest reported efficiency of 0.21% for energy conversion into a THz pulse.

1. Introduction

Coherent few-cycle terahertz (THz) pulses have various potential uses in a range of applications in the fields of physics, chemistry, and biology [1

K. Sakai, ed., Terahertz Optoelectronics (Springer, Berlin, 2005).

, 2

M. Tonouchi, “Cutting-edge terahertz technology,” Nat. Photonics 1(2), 97–105 (2007). [CrossRef]

]. Recently, the generation of extremely intense THz pulses has been achieved via the nonresonant optical rectification process. Quadric χ⁽²⁾ materials satisfying the phase-matching condition enable intense THz pulse generation even with intense optical excitation [3

A. Rice, Y. Jin, X. F. Ma, X.-C. Zhang, D. Bliss, J. Larkin, and M. Alexander, “Terahertz optical rectification from 110 zinc-blende crystals,” Appl. Phys. Lett. 64(11), 1324–1326 (1994). [CrossRef]

–5

F. Blanchard, L. Razzari, H. C. Bandulet, G. Sharma, R. Morandotti, J. C. Kieffer, T. Ozaki, M. Reid, H. F. Tiedje, H. K. Haugen, and F. A. Hegmann, “Generation of 1.5 µJ single-cycle terahertz pulses by optical rectification from a large aperture ZnTe crystal,” Opt. Express 15(20), 13212–13220 (2007). [CrossRef] [PubMed]

]. In particular, the tilted pulse front excitation of high-χ⁽²⁾ media such as LiNbO₃ enables very efficient THz pulse generation, in which the pulse satisfies the phase matching condition in a non-collinear geometry. This technique was proposed by Hebling and associates [6

J. Hebling, G. Almási, I. Kozma, and J. Kuhl, “Velocity matching by pulse front tilting for large area THz-pulse generation,” Opt. Express 10(21), 1161–1166 (2002). [PubMed]

, 7

J. Hebling, A. G. Stepanov, G. Almási, B. Bartal, and J. Kuhl, “Tunable THz pulse generation by optical rectification of ultrashort laser pulses with tilted pulse fronts,” Appl. Phys. B 78, 593–599 (2004). [CrossRef]

] and has been experimentally demonstrated by many researchers [8

A. Stepanov, J. Kuhl, I. Kozma, E. Riedle, G. Almási, and J. Hebling, “Scaling up the energy of THz pulses created by optical rectification,” Opt. Express 13(15), 5762–5768 (2005). [CrossRef] [PubMed]

–10

J. Hebling, K.-L. Yeh, M. C. Hoffmann, B. Bartal, and K. A. Nelson, “Generation of high-power terahertz pulses by tilted-pulse-front excitation and their application possibilities,” J. Opt. Soc. Am. B 25(7), B6–B19 (2008). [CrossRef]

]. The highest reported output pulse energy is 50 μJ [11

A. G. Stepanov, S. Henin, Y. Petit, L. Bonacina, J. Kasparian, and J.-P. Wolf, “Mobile source of high-energy single-cycle terahertz pulses,” Appl. Phys. B 101(1-2), 11–14 (2010). [CrossRef]

] and the highest reported electric field exceeds 1 MV/cm [12

H. Hirori, A. Doi, F. Blanchard, and K. Tanaka, “Single-cycle terahertz pulses with amplitudes exceeding 1 MV/cm generated by optical rectification in LiNbO₃,” Appl. Phys. Lett. 98(9), 091106 (2011). [CrossRef]

]. These THz sources are expected to enable rapid imaging [13

E. Abraham, Y. Ohgi, M. A. Minami, M. Jewariya, M. Nagai, T. Araki, and T. Yasui, “Real-time line projection for fast terahertz spectral computed tomography,” Opt. Lett. 36(11), 2119–2121 (2011). [CrossRef] [PubMed]

, 14

F. Blanchard, A. Doi, T. Tanaka, H. Hirori, H. Tanaka, Y. Kadoya, and K. Tanaka, “Real-time terahertz near-field microscope,” Opt. Express 19(9), 8277–8284 (2011). [CrossRef] [PubMed]

] and lead to new methods of nonlinear spectroscopy in the THz frequency region [15

K. Tanaka, H. Hirori, and M. Nagai, “THz nonlinear spectroscopy of solids,” IEEE Trans. Terahertz Sci. Technol. 1(1), 301–312 (2011). [CrossRef]

, 16

S. Fleischer, Y. Zhou, R. W. Field, and K. A. Nelson, “Molecular orientation and alignment by intense single-cycle THz pulses,” Phys. Rev. Lett. 107(16), 163603 (2011). [CrossRef] [PubMed]

The advantage of this THz pulse generation technique is its high efficiency. Since the output pulse energy of a THz pulse via the χ⁽²⁾ process is proportional to the square of the input pulse energy, the intense optical excitation pulse and long interaction length in a χ⁽²⁾ crystal can enhance the conversion efficiency. The input pulse energy and interaction length are practically limited by multiphoton absorption and group velocity dispersion (GVD), respectively. Numerical simulations indicate energy conversion efficiency approaching a few percent [17

J. A. Fülöp, L. Pálfalvi, G. Almási, and J. Hebling, “Design of high-energy terahertz sources based on optical rectification,” Opt. Express 18(12), 12311–12327 (2010). [CrossRef] [PubMed]

, 18

J. A. Fülöp, L. Pálfalvi, Z Ollmann, and J. Hebling, “Towards generation of mJ-level ultrashort THz pulses by optical rectification,” Opt. Express 19(16), 15090–15097 (2011). [CrossRef] [PubMed]

]. However, the experimentally reported energy conversion efficiency has been less than 0.1% (10⁻³), even using an intense pulse from a Ti:sapphire amplifier system [10

, 12

]. Here, we propose that instantaneous χ⁽³⁾ nonlinear processes, including the stimulated Raman scattering (SRS) process, coinciding with the χ⁽²⁾ process, reduce the efficiency of THz pulse generation. In general, an efficient cascaded χ⁽²⁾ process is equivalent to an effective χ⁽³⁾ process and has been used for ultrashort pulse shaping in a periodic-poled LiNbO₃ waveguide via second harmonic generation [19

C. Langrock, M. M. Fejer, I. Hartl, and M. E. Fermann, “Generation of octave-spanning spectra inside reverse-photon-exchanged periodically poled lithium niobate waveguides,” Opt. Lett. 32(17), 2478–2480 (2007). [CrossRef] [PubMed]

]. In this case, the cascaded χ⁽²⁾ and χ⁽³⁾ phase modulations are of opposite sign and have a comparable magnitude, and another third-order nonlinearity originating from SRS affects the spectral modulation of a broadband excitation pulse [20

C. R. Phillips, C. Langrock, J. S. Pelc, M. M. Fejer, I. Hartl, and M. E. Fermann, “Supercontinuum generation in quasi-phasematched waveguides,” Opt. Express 19(20), 18754–18773 (2011). [CrossRef] [PubMed]

]. For optical rectification, SRS may coincide with the χ⁽²⁾ process when using a conventional Ti:sapphire laser with < 100 fs pulse duration whose bandwidth covers the lowest TO₁ (A) phonon frequency (7.6 THz) [21

A. Ridah, M. D. Fontana, and P. Bourson, “Temperature dependence of the Raman modes in LiNbO₃ and mechanism of the phase transition,” Phys. Rev. B 56(10), 5967–5973 (1997). [CrossRef]

]. Actually the spectral broadening of an excitation pulse via SRS has been reported in LiNbO₃ [22

E. Matsubara, T. Sekikawa, and M. Yamashita, “Generation of ultrashort optical pulses using multiple coherent anti-Stokes Raman scattering in a crystal at room temperature,” Appl. Phys. Lett. 92(7), 071104 (2008). [CrossRef]

], as well as undesired energy dissipation. This may cause the temporal stretching of an excitation pulse due to the very high GVD in LiNbO₃, which reduces the efficiency of THz pulse generation. In this study, we control the spectral width of excitation pulses to less than the frequency of the Raman-active phonon mode to suppress the SRS process. As a result, we achieved the highest ever reported conversion efficiency of 0.21% for THz pulse generation.

2. Experimental setup

The experimental setup is almost the same as that in ref [23

M. Jewariya, M. Nagai, and K. Tanaka, “Enhancement of terahertz wave generation by cascaded χ⁽²⁾ processes in LiNbO₃,” J. Opt. Soc. Am. B 26(9), A101–A106 (2009). [CrossRef]

]. We use optical pulses from an amplified laser system with a repetition rate of 1 kHz, an average power of 580 mW, and a center wavelength of 780 nm (a weighted center frequency of 383.8 THz). We previously demonstrated THz pulse generation using this excitation laser with 150 fs pulse duration and reported a saturated conversion efficiency of 0.08% [23

M. Jewariya, M. Nagai, and K. Tanaka, “Enhancement of terahertz wave generation by cascaded χ⁽²⁾ processes in LiNbO₃,” J. Opt. Soc. Am. B 26(9), A101–A106 (2009). [CrossRef]

]. In the present study, we tuned the Pockels cell in the cavity of the Ti:sapphire regenerative amplifier for the selective amplification of high-frequency components of the seed laser (femtolite, IMRA America Inc.) and reduced the bandwidth of the amplified pulse to 3.3 THz. This frequency is less than the TO₁ phonon frequency (7.6 THz). The full width at half maximum of the autocorrelation signal is 280 fs, corresponding to a net pulse duration of ~200 fs. This optical beam is split into two for THz pulse generation and detection. We control the excitation pulse front using an gold-coated 2000 lines/mm holographic grating and two lenses, and we inject it onto an emitter with a spot size of 1.5 × 1 mm², smaller than that in ref [23

M. Jewariya, M. Nagai, and K. Tanaka, “Enhancement of terahertz wave generation by cascaded χ⁽²⁾ processes in LiNbO₃,” J. Opt. Soc. Am. B 26(9), A101–A106 (2009). [CrossRef]

], without any damage to the emitter. Such a small spot size suppresses the effect of tilted pulse front distortion [12

]. The emitter is a stoichiometric LiNbO₃ crystal with a Mg concentration of 1.5%. One surface is cut with an angle of 62° and is antireflection-coated for near-infrared wavelengths. The generated THz pulse is guided using two off-axis parabolic mirrors (50 mm diameter and 50 mm focal length) and the emitter image is transferred onto the detector.

We evaluated the electric field amplitude using an electrooptic (EO) sampling technique. As the EO crystal we used a (110)-oriented GaP crystal with a thickness of L = 0.3 mm. The low EO coefficient (r₄₁ = 1 pm/V) and high phonon frequency in GaP enabled the detection of intense and broadband THz radiation. The EO signal caused by a phase shift θ can be easily calibrated using the formula ΔI/I = sin θ = 2π/λ n_opt³ r₄₁ E_THzL, where n_opt = 3.2 is the refractive index of GaP at λ = 780 nm [24

Q. Wu and X.-C. Zhang, “Ultrafast electro-optic field sensors,” Appl. Phys. Lett. 68(12), 1604–1606 (1996). [CrossRef]

]. To prevent the saturation of sensitivity, we placed six Si plates in the path of the THz radiation, which acted as attenuation filters with a large reflection loss. We divided the Fourier components of the THz pulse by 2/(n_THz-1) (e^iΔkL-1)/iΔk to compensate for the Frenel loss and phase mismatch Δk in GaP, and obtain the true time evolution of the electric field from the Fourier components below 3.5 THz.

3. Experiments and discussions

Figure 1(a) shows the temporal evolution of the electric field evaluated from the EO signal. The observed electric field is as high as 380 kV/cm. In this measurement, although we used a sampling pulse with a duration of 200 fs, the delay time between the maximum and minimum electric field is only 300 fs. This implies that the temporal profile of the electric field becomes dull. By deconvoluting the sampling pulse, we found that the prospective electric field exceeds 500 kV/cm. Figure 1(b) shows the power spectrum corresponding to Fig. 1(a). In this figure, we show the Fourier components before dividing by the sensitivity factor 2/(n_THz-1) (e^iΔkL-1)/iΔk. The weighted center frequency of the emitted THz pulse is estimated to be 1.09 THz. In spite of the longer pulse duration of 200 fs, the spectral bandwidth of the emitted THz pulse is similar to that obtained using a 100 fs excitation pulse.

Fig. 1 (a) Temporal profile of THz pulse emitted from Mg-doped LiNbO₃ using excitation pulse with duration of 200 fs and pulse energy of 520 μJ. (b) Power spectrum of THz pulse evaluated from temporal profile.

We also evaluated the output pulse energy to be 1.1 μJ using a conventional thermal sensor (PM30, Coherent Inc.). In this measurement, we removed the entire optical component using an optical diffusion filter (a thick Teflon plate) and an optical absorption filter (a thin black polypropylene film). The input pulse energy was measured to be 520 μJ using the same sensor, meaning that the conversion efficiency from these pulse energies reached 0.21%. This value is higher than the previous reported values of less than 0.1% [10

, 15

K. Tanaka, H. Hirori, and M. Nagai, “THz nonlinear spectroscopy of solids,” IEEE Trans. Terahertz Sci. Technol. 1(1), 301–312 (2011). [CrossRef]

Fülöp et al. carried out simulations to obtain the THz pulse generation efficiency under various excitation conditions while taking into account the linear dispersion of LiNbO₃ and the multiphoton absorption of the excitation pulse [18

, 19

]. They pointed out that the effective THz generation length which is determined by the stretching of the excitation pulse due to the large GVD in LiNbO₃, strongly affects the conversion efficiency, and concluded that the generation efficiency increases when the excitation pulse duration increases to several hundred fs. Their conclusions appear to support our results. However, such a large improvement of the generation efficiency from 0.08% to 0.21% by changing the excitation pulse duration from 150 fs to 200 fs cannot be reproduced by their numerical simulations.

To elucidate the origin of this discrepancy, we measured the spectra of the excitation pulses passing through the LiNbO₃ crystal. Figure 2(a) shows the spectra of the excitation pulse before and after passing through the LiNbO₃ crystal. The incident pulse energies are 30 μJ (dotted curve) and 520 μJ (solid curve). The weighted center frequency of the original excitation pulse is 383.8 THz. However, the spectrum of the transmitted excitation pulse is shifted to a lower weighted center frequency of 382.1 (374.5) THz for the incident energy of 30 (520) μJ. Such a spectral shift has already been reported in several papers [23

M. Jewariya, M. Nagai, and K. Tanaka, “Enhancement of terahertz wave generation by cascaded χ⁽²⁾ processes in LiNbO₃,” J. Opt. Soc. Am. B 26(9), A101–A106 (2009). [CrossRef]

, 25

A. G. Stepanov, A. A. Mel’nikov, V. O. Kompanets, and S. V. Chekalin, “Spectral modification of femtosecond laser pulses in the process of highly efficient generation of terahertz radiation via optical rectification,” JETP Lett. 85(5), 227–230 (2007). [CrossRef]

, 26

M. Nagai, M. Jewariya, Y. Ichikawa, H. Ohtake, T. Sugiura, Y. Uehara, and K. Tanaka, “Broadband and high power terahertz pulse generation beyond excitation bandwidth limitation via χ² cascaded processes in LiNbO3,” Opt. Express 17(14), 11543–11549 (2009). [CrossRef] [PubMed]

] and has been considered as evidence of efficient THz pulse generation; assuming an excitation pulse emitting an intense THz pulse in a lossless nonlinear medium, its frequency shift corresponds to the generation efficiency. Now, let us examine the spectra in Fig. 2 more closely. One can see several characteristic structures in the spectra. In the case of 30 μJ pulse energy, a peak appears at a frequency 7.0 THz lower than the peak frequency of the incident excitation pulse, whereas for 520 μJ pulse energy, one broad peak appears at a center frequency 8.0 THz lower than the peak frequency for the 30 μJ pulse. Such peaks cannot be explained by considering only the χ⁽²⁾ processes obtained from numerical simulation even for a lossy nonlinear medium [23

M. Jewariya, M. Nagai, and K. Tanaka, “Enhancement of terahertz wave generation by cascaded χ⁽²⁾ processes in LiNbO₃,” J. Opt. Soc. Am. B 26(9), A101–A106 (2009). [CrossRef]

Fig. 2 (a) Optical spectra of excitation pulse (blue curve) and transmitted excitation pulses after passing through LiNbO₃ (black curves) when the incident pulse energy is 30 μJ (dotted curve) and 520 μJ (solid curve). These spectra are normalized by their area. (b) Raman intensity I_R of LiNbO₃ at room temperature in the X(ZZ)Y configuration. The dashed curve is the fitting with four Lorentz functions. (c) Complex Raman tensor evaluated from Raman spectrum, which originates from the four phonon modes in (b).

We postulate that such peaks are due to the SRS process. Figure 2(b) shows the Raman intensity I_R of LiNbO₃ at room temperature. The configuration X(ZZ)Y is almost the same as that for THz pulse generation. Four characteristic Raman modes appear at 252, 275, 332, and 632 cm⁻¹, denoted as the A₁ (TO₁), A₁ (TO₂), A₁ (TO₃), and A₁ (TO₄) modes, respectively [21

A. Ridah, M. D. Fontana, and P. Bourson, “Temperature dependence of the Raman modes in LiNbO₃ and mechanism of the phase transition,” Phys. Rev. B 56(10), 5967–5973 (1997). [CrossRef]

]. We evaluate the complex Raman tensor χ^R, shown in Fig. 2(c), from the Raman spectrum using the relation I_R ∝ ωIm[χ^R], assuming the superposition of four Lorentz functions. Since the value of χ⁽³⁾ for SRS is partially related to the value of χ^R, Fig. 2(c) implies enhanced SRS for the TO₁ (7.4 THz) and TO₄ (19 THz) modes. The frequency shifts in Fig. 2(a) are almost the same as the frequencies of the TO₁ Raman mode, as shown in Fig. 2(c). Since the energy of the incident excitation pulse is sufficiently large to cause SRS, we consider that the peak for 30 μJ pulse energy originates from the SRS of the TO₁ mode. For the 520 μJ pulse energy, the spectral shape satisfies the complex nonlinear propagation equation including χ⁽³⁾ for SRS as shown in Fig. 2(c).

The above spectral peaks in the transmitted excitation pulse were more apparent when using a broader-band excitation pulse with 150 fs duration [23

M. Jewariya, M. Nagai, and K. Tanaka, “Enhancement of terahertz wave generation by cascaded χ⁽²⁾ processes in LiNbO₃,” J. Opt. Soc. Am. B 26(9), A101–A106 (2009). [CrossRef]

]. A sharp peak initially appears at the lowest frequency of the incident pulse spectrum. This behavior is characteristic of spectral modulation via SRS, which greatly reduces the generation efficiency. In the present experiment, the bandwidth of the excitation pulse does not cover the phonon frequency, and the peaks in Fig. 2(a) appear to be outside the spectrum of the incident excitation pulse. To achieve SRS with a narrow-bandwidth excitation pulse, spectral broadening with a different mechanism such as a cascaded χ⁽²⁾ process is necessary.

From these findings, we consider the following mechanism for high-efficiency THz pulse generation. Immediately after the excitation pulse is incident to the LiNbO₃ crystal, a THz pulse is efficiently generated via optical rectification. The emitted intense THz pulse modulates the phase of the optical excitation pulse, causing a Stokes shift of the excitation pulse with spectral broadening via the cascaded χ⁽²⁾ process. This provides a new generation channel for higher-frequency THz components, and further frequency conversion is possible [26

]. When the spectral width of the excitation pulse reaches 7.4 THz, it starts to be accompanied by SRS, causing the spectral broadening of the excitation pulse to be accelerated. Such spectral broadening above 7.4 THz does not provide a new generation channel for the THz component, and results in energy loss of the excitation pulse. Furthermore, the very high GVD of 360 fs²/mm at 780 nm in LiNbO₃ [27

E. D. Palik, ed., Handbook of Optical Constants of Solids (Academic Press, New York, 1985)

] causes optical pulse stretching with a short propagation distance. Consequently, the generation efficiency of the THz pulse becomes saturated. This mechanism is schematically shown in Fig. 3 .

Fig. 3 THz pulse generation coinciding with cascaded χ⁽²⁾ process and SRS.

According to our new consideration of the THz generation efficiency, there is another unavoidable factor limiting the efficiency, the SRS process, in addition to the factors considered by Fülöp et al. [18

, 19

]. Since calibrating the χ⁽³⁾ value in LiNbO₃ may be challenging [20

], there may be considerable uncertainty even if we take into account the SRS effect when numerically simulating the THz generation efficiency. Instead, we propose a new maximum efficiency as follows. The spectral frequency shift of an excitation pulse is reflected in the generation efficiency of a THz pulse that obeys the energy conservation rule in the χ⁽²⁾ process. Because this frequency shift results in the spectral broadening of the excitation pulse, the SRS process starts to be enhanced when the spectral shift of the excitation pulse approaches the lowest A-mode phonon frequency of 7.4 THz. Once the SRS process becomes dominant, THz pulse generation through optical rectification becomes greatly suppressed owing to the very large GVD in LiNbO₃. Then the maximum energy conversion efficiency can be considered to be (frequency of phonon) / (frequency of excitation pulse) = 1.9% in the case of 780 nm optical excitation. In this context, a laser with lower frequency, such as an Yb-doped laser, may realize more efficient optical rectification. This will also reduce the effect of GVD, meaning that the excitation pulse will be less stretched, resulting in enhanced efficiency. THz pulse generation using an Yb-doped laser has already been demonstrated [26

, 28

M. C. Hoffmann, K.-L. Yeh, J. Hebling, and K. A. Nelson, “Efficient terahertz generation by optical rectification at 1035 nm,” Opt. Express 15(18), 11706–11713 (2007). [CrossRef] [PubMed]

, 29

M. C. Hoffmann, K.-L. Yeh, H. Y. Hwang, T. S. Sosnowski, B. S. Prall, J. Hebling, and K. A. Nelson, “Fiber laser pumped high average power single-cycle terahertz pulse source,” Appl. Phys. Lett. 93(14), 141107 (2008). [CrossRef]

], in which the amount of spectral modulation via the SRS process was found to be small. Very recently, a conversion efficiency of 0.28% has been experimentally demonstrated using intense Yb:YAG lasers with 1.3 ps pulse duration [30

J. A. Fülöp, L. Pálfalvi, S. Klingebiel, G. Almási, F. Krausz, S. Karsch, and J. Hebling, “Generation of sub-mJ terahertz pulses by optical rectification,” Opt. Lett. 37(4), 557–559 (2012). [CrossRef] [PubMed]

4. Conclusions

We experimentally demonstrated intense THz electric pulse generation with optical rectification in LiNbO₃ with the highest ever reported energy conversion efficiency of 0.21%. Bandwidth control of the optical excitation pulse suppresses the SRS process, leading to efficient THz pulse generation without the undesired energy dissipation of the excitation pulse. This is expected to provide new optimized conditions for extremely intense and high-efficiency THz pulse generation.

Acknowledgments

This work was supported by Industry-Academia Collaborative R&D from Japan Science and Technology Agency (JST) and a Grant-in-Aid for Scientific Research on Innovative Areas (No. 2210901 and No. 20104007) from the Ministry of Education, Culture, Sports, Science and Technology (MEXT) of Japan.

References and links

1.	K. Sakai, ed., Terahertz Optoelectronics (Springer, Berlin, 2005).
2.	M. Tonouchi, “Cutting-edge terahertz technology,” Nat. Photonics 1(2), 97–105 (2007). [CrossRef]
3.	A. Rice, Y. Jin, X. F. Ma, X.-C. Zhang, D. Bliss, J. Larkin, and M. Alexander, “Terahertz optical rectification from 110 zinc-blende crystals,” Appl. Phys. Lett. 64(11), 1324–1326 (1994). [CrossRef]
4.	M. Nagai, K. Tanaka, H. Ohtake, T. Bessho, T. Sugiura, T. Hirosumi, and M. Yoshida, “Generation and detection of terahertz radiation by electro-optical process in GaAs using 1.56μm fiber laser pulses,” Appl. Phys. Lett. 85(18), 3974–3976 (2004). [CrossRef]
5.	F. Blanchard, L. Razzari, H. C. Bandulet, G. Sharma, R. Morandotti, J. C. Kieffer, T. Ozaki, M. Reid, H. F. Tiedje, H. K. Haugen, and F. A. Hegmann, “Generation of 1.5 µJ single-cycle terahertz pulses by optical rectification from a large aperture ZnTe crystal,” Opt. Express 15(20), 13212–13220 (2007). [CrossRef] [PubMed]
6.	J. Hebling, G. Almási, I. Kozma, and J. Kuhl, “Velocity matching by pulse front tilting for large area THz-pulse generation,” Opt. Express 10(21), 1161–1166 (2002). [PubMed]
7.	J. Hebling, A. G. Stepanov, G. Almási, B. Bartal, and J. Kuhl, “Tunable THz pulse generation by optical rectification of ultrashort laser pulses with tilted pulse fronts,” Appl. Phys. B 78, 593–599 (2004). [CrossRef]
8.	A. Stepanov, J. Kuhl, I. Kozma, E. Riedle, G. Almási, and J. Hebling, “Scaling up the energy of THz pulses created by optical rectification,” Opt. Express 13(15), 5762–5768 (2005). [CrossRef] [PubMed]
9.	K.-L. Yeh, M. C. Hoffmann, J. Hebling, and K. A. Nelson, “Generation of 10μJ ultrashort terahertz pulses by optical rectification,” Appl. Phys. Lett. 90(17), 171121 (2007). [CrossRef]
10.	J. Hebling, K.-L. Yeh, M. C. Hoffmann, B. Bartal, and K. A. Nelson, “Generation of high-power terahertz pulses by tilted-pulse-front excitation and their application possibilities,” J. Opt. Soc. Am. B 25(7), B6–B19 (2008). [CrossRef]
11.	A. G. Stepanov, S. Henin, Y. Petit, L. Bonacina, J. Kasparian, and J.-P. Wolf, “Mobile source of high-energy single-cycle terahertz pulses,” Appl. Phys. B 101(1-2), 11–14 (2010). [CrossRef]
12.	H. Hirori, A. Doi, F. Blanchard, and K. Tanaka, “Single-cycle terahertz pulses with amplitudes exceeding 1 MV/cm generated by optical rectification in LiNbO₃,” Appl. Phys. Lett. 98(9), 091106 (2011). [CrossRef]
13.	E. Abraham, Y. Ohgi, M. A. Minami, M. Jewariya, M. Nagai, T. Araki, and T. Yasui, “Real-time line projection for fast terahertz spectral computed tomography,” Opt. Lett. 36(11), 2119–2121 (2011). [CrossRef] [PubMed]
14.	F. Blanchard, A. Doi, T. Tanaka, H. Hirori, H. Tanaka, Y. Kadoya, and K. Tanaka, “Real-time terahertz near-field microscope,” Opt. Express 19(9), 8277–8284 (2011). [CrossRef] [PubMed]
15.	K. Tanaka, H. Hirori, and M. Nagai, “THz nonlinear spectroscopy of solids,” IEEE Trans. Terahertz Sci. Technol. 1(1), 301–312 (2011). [CrossRef]
16.	S. Fleischer, Y. Zhou, R. W. Field, and K. A. Nelson, “Molecular orientation and alignment by intense single-cycle THz pulses,” Phys. Rev. Lett. 107(16), 163603 (2011). [CrossRef] [PubMed]
17.	J. A. Fülöp, L. Pálfalvi, G. Almási, and J. Hebling, “Design of high-energy terahertz sources based on optical rectification,” Opt. Express 18(12), 12311–12327 (2010). [CrossRef] [PubMed]
18.	J. A. Fülöp, L. Pálfalvi, Z Ollmann, and J. Hebling, “Towards generation of mJ-level ultrashort THz pulses by optical rectification,” Opt. Express 19(16), 15090–15097 (2011). [CrossRef] [PubMed]
19.	C. Langrock, M. M. Fejer, I. Hartl, and M. E. Fermann, “Generation of octave-spanning spectra inside reverse-photon-exchanged periodically poled lithium niobate waveguides,” Opt. Lett. 32(17), 2478–2480 (2007). [CrossRef] [PubMed]
20.	C. R. Phillips, C. Langrock, J. S. Pelc, M. M. Fejer, I. Hartl, and M. E. Fermann, “Supercontinuum generation in quasi-phasematched waveguides,” Opt. Express 19(20), 18754–18773 (2011). [CrossRef] [PubMed]
21.	A. Ridah, M. D. Fontana, and P. Bourson, “Temperature dependence of the Raman modes in LiNbO₃ and mechanism of the phase transition,” Phys. Rev. B 56(10), 5967–5973 (1997). [CrossRef]
22.	E. Matsubara, T. Sekikawa, and M. Yamashita, “Generation of ultrashort optical pulses using multiple coherent anti-Stokes Raman scattering in a crystal at room temperature,” Appl. Phys. Lett. 92(7), 071104 (2008). [CrossRef]
23.	M. Jewariya, M. Nagai, and K. Tanaka, “Enhancement of terahertz wave generation by cascaded χ⁽²⁾ processes in LiNbO₃,” J. Opt. Soc. Am. B 26(9), A101–A106 (2009). [CrossRef]
24.	Q. Wu and X.-C. Zhang, “Ultrafast electro-optic field sensors,” Appl. Phys. Lett. 68(12), 1604–1606 (1996). [CrossRef]
25.	A. G. Stepanov, A. A. Mel’nikov, V. O. Kompanets, and S. V. Chekalin, “Spectral modification of femtosecond laser pulses in the process of highly efficient generation of terahertz radiation via optical rectification,” JETP Lett. 85(5), 227–230 (2007). [CrossRef]
26.	M. Nagai, M. Jewariya, Y. Ichikawa, H. Ohtake, T. Sugiura, Y. Uehara, and K. Tanaka, “Broadband and high power terahertz pulse generation beyond excitation bandwidth limitation via χ² cascaded processes in LiNbO3,” Opt. Express 17(14), 11543–11549 (2009). [CrossRef] [PubMed]
27.	E. D. Palik, ed., Handbook of Optical Constants of Solids (Academic Press, New York, 1985)
28.	M. C. Hoffmann, K.-L. Yeh, J. Hebling, and K. A. Nelson, “Efficient terahertz generation by optical rectification at 1035 nm,” Opt. Express 15(18), 11706–11713 (2007). [CrossRef] [PubMed]
29.	M. C. Hoffmann, K.-L. Yeh, H. Y. Hwang, T. S. Sosnowski, B. S. Prall, J. Hebling, and K. A. Nelson, “Fiber laser pumped high average power single-cycle terahertz pulse source,” Appl. Phys. Lett. 93(14), 141107 (2008). [CrossRef]
30.	J. A. Fülöp, L. Pálfalvi, S. Klingebiel, G. Almási, F. Krausz, S. Karsch, and J. Hebling, “Generation of sub-mJ terahertz pulses by optical rectification,” Opt. Lett. 37(4), 557–559 (2012). [CrossRef] [PubMed]

OCIS Codes
(190.4410) Nonlinear optics : Nonlinear optics, parametric processes
(190.7110) Nonlinear optics : Ultrafast nonlinear optics
(300.6495) Spectroscopy : Spectroscopy, teraherz

ToC Category:
Nonlinear Optics

History
Original Manuscript: February 2, 2012
Revised Manuscript: March 1, 2012
Manuscript Accepted: March 1, 2012
Published: March 5, 2012

Citation
Masaya Nagai, Eiichi Matsubara, and Masaaki Ashida, "High-efficiency terahertz pulse generation via optical rectification by suppressing stimulated Raman scattering process," Opt. Express 20, 6509-6514 (2012)
http://www.opticsinfobase.org/oe/abstract.cfm?URI=oe-20-6-6509

Sort: Author | Year | Journal | Reset

References

K. Sakai, ed., Terahertz Optoelectronics (Springer, Berlin, 2005).
M. Tonouchi, “Cutting-edge terahertz technology,” Nat. Photonics1(2), 97–105 (2007). [CrossRef]
A. Rice, Y. Jin, X. F. Ma, X.-C. Zhang, D. Bliss, J. Larkin, and M. Alexander, “Terahertz optical rectification from 110 zinc-blende crystals,” Appl. Phys. Lett.64(11), 1324–1326 (1994). [CrossRef]
M. Nagai, K. Tanaka, H. Ohtake, T. Bessho, T. Sugiura, T. Hirosumi, and M. Yoshida, “Generation and detection of terahertz radiation by electro-optical process in GaAs using 1.56μm fiber laser pulses,” Appl. Phys. Lett.85(18), 3974–3976 (2004). [CrossRef]
F. Blanchard, L. Razzari, H. C. Bandulet, G. Sharma, R. Morandotti, J. C. Kieffer, T. Ozaki, M. Reid, H. F. Tiedje, H. K. Haugen, and F. A. Hegmann, “Generation of 1.5 µJ single-cycle terahertz pulses by optical rectification from a large aperture ZnTe crystal,” Opt. Express15(20), 13212–13220 (2007). [CrossRef] [PubMed]
J. Hebling, G. Almási, I. Kozma, and J. Kuhl, “Velocity matching by pulse front tilting for large area THz-pulse generation,” Opt. Express10(21), 1161–1166 (2002). [PubMed]
J. Hebling, A. G. Stepanov, G. Almási, B. Bartal, and J. Kuhl, “Tunable THz pulse generation by optical rectification of ultrashort laser pulses with tilted pulse fronts,” Appl. Phys. B78, 593–599 (2004). [CrossRef]
A. Stepanov, J. Kuhl, I. Kozma, E. Riedle, G. Almási, and J. Hebling, “Scaling up the energy of THz pulses created by optical rectification,” Opt. Express13(15), 5762–5768 (2005). [CrossRef] [PubMed]
K.-L. Yeh, M. C. Hoffmann, J. Hebling, and K. A. Nelson, “Generation of 10μJ ultrashort terahertz pulses by optical rectification,” Appl. Phys. Lett.90(17), 171121 (2007). [CrossRef]
J. Hebling, K.-L. Yeh, M. C. Hoffmann, B. Bartal, and K. A. Nelson, “Generation of high-power terahertz pulses by tilted-pulse-front excitation and their application possibilities,” J. Opt. Soc. Am. B25(7), B6–B19 (2008). [CrossRef]
A. G. Stepanov, S. Henin, Y. Petit, L. Bonacina, J. Kasparian, and J.-P. Wolf, “Mobile source of high-energy single-cycle terahertz pulses,” Appl. Phys. B101(1-2), 11–14 (2010). [CrossRef]
H. Hirori, A. Doi, F. Blanchard, and K. Tanaka, “Single-cycle terahertz pulses with amplitudes exceeding 1 MV/cm generated by optical rectification in LiNbO3,” Appl. Phys. Lett.98(9), 091106 (2011). [CrossRef]
E. Abraham, Y. Ohgi, M. A. Minami, M. Jewariya, M. Nagai, T. Araki, and T. Yasui, “Real-time line projection for fast terahertz spectral computed tomography,” Opt. Lett.36(11), 2119–2121 (2011). [CrossRef] [PubMed]
F. Blanchard, A. Doi, T. Tanaka, H. Hirori, H. Tanaka, Y. Kadoya, and K. Tanaka, “Real-time terahertz near-field microscope,” Opt. Express19(9), 8277–8284 (2011). [CrossRef] [PubMed]
K. Tanaka, H. Hirori, and M. Nagai, “THz nonlinear spectroscopy of solids,” IEEE Trans. Terahertz Sci. Technol.1(1), 301–312 (2011). [CrossRef]
S. Fleischer, Y. Zhou, R. W. Field, and K. A. Nelson, “Molecular orientation and alignment by intense single-cycle THz pulses,” Phys. Rev. Lett.107(16), 163603 (2011). [CrossRef] [PubMed]
J. A. Fülöp, L. Pálfalvi, G. Almási, and J. Hebling, “Design of high-energy terahertz sources based on optical rectification,” Opt. Express18(12), 12311–12327 (2010). [CrossRef] [PubMed]
J. A. Fülöp, L. Pálfalvi, Z Ollmann, and J. Hebling, “Towards generation of mJ-level ultrashort THz pulses by optical rectification,” Opt. Express19(16), 15090–15097 (2011). [CrossRef] [PubMed]
C. Langrock, M. M. Fejer, I. Hartl, and M. E. Fermann, “Generation of octave-spanning spectra inside reverse-photon-exchanged periodically poled lithium niobate waveguides,” Opt. Lett.32(17), 2478–2480 (2007). [CrossRef] [PubMed]
C. R. Phillips, C. Langrock, J. S. Pelc, M. M. Fejer, I. Hartl, and M. E. Fermann, “Supercontinuum generation in quasi-phasematched waveguides,” Opt. Express19(20), 18754–18773 (2011). [CrossRef] [PubMed]
A. Ridah, M. D. Fontana, and P. Bourson, “Temperature dependence of the Raman modes in LiNbO3 and mechanism of the phase transition,” Phys. Rev. B56(10), 5967–5973 (1997). [CrossRef]
E. Matsubara, T. Sekikawa, and M. Yamashita, “Generation of ultrashort optical pulses using multiple coherent anti-Stokes Raman scattering in a crystal at room temperature,” Appl. Phys. Lett.92(7), 071104 (2008). [CrossRef]
M. Jewariya, M. Nagai, and K. Tanaka, “Enhancement of terahertz wave generation by cascaded χ(2) processes in LiNbO3,” J. Opt. Soc. Am. B26(9), A101–A106 (2009). [CrossRef]
Q. Wu and X.-C. Zhang, “Ultrafast electro-optic field sensors,” Appl. Phys. Lett.68(12), 1604–1606 (1996). [CrossRef]
A. G. Stepanov, A. A. Mel’nikov, V. O. Kompanets, and S. V. Chekalin, “Spectral modification of femtosecond laser pulses in the process of highly efficient generation of terahertz radiation via optical rectification,” JETP Lett.85(5), 227–230 (2007). [CrossRef]
M. Nagai, M. Jewariya, Y. Ichikawa, H. Ohtake, T. Sugiura, Y. Uehara, and K. Tanaka, “Broadband and high power terahertz pulse generation beyond excitation bandwidth limitation via χ2 cascaded processes in LiNbO3,” Opt. Express17(14), 11543–11549 (2009). [CrossRef] [PubMed]
E. D. Palik, ed., Handbook of Optical Constants of Solids (Academic Press, New York, 1985)
M. C. Hoffmann, K.-L. Yeh, J. Hebling, and K. A. Nelson, “Efficient terahertz generation by optical rectification at 1035 nm,” Opt. Express15(18), 11706–11713 (2007). [CrossRef] [PubMed]
M. C. Hoffmann, K.-L. Yeh, H. Y. Hwang, T. S. Sosnowski, B. S. Prall, J. Hebling, and K. A. Nelson, “Fiber laser pumped high average power single-cycle terahertz pulse source,” Appl. Phys. Lett.93(14), 141107 (2008). [CrossRef]
J. A. Fülöp, L. Pálfalvi, S. Klingebiel, G. Almási, F. Krausz, S. Karsch, and J. Hebling, “Generation of sub-mJ terahertz pulses by optical rectification,” Opt. Lett.37(4), 557–559 (2012). [CrossRef] [PubMed]

Cited By

Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.

Click here to see a list of articles that cite this paper