OSA's Digital Library

Optics Express

Optics Express

  • Editor: Andrew M. Weiner
  • Vol. 21, Iss. 3 — Feb. 11, 2013
  • pp: 2718–2726
« Show journal navigation

An ultrawide tunable range single passband microwave photonic filter based on stimulated Brillouin scattering

Yongchuan Xiao, Jing Guo, Kui Wu, Pengfei Qu, Huajuan Qi, Caixia Liu, Shengping Ruan, Weiyou Chen, and Wei Dong  »View Author Affiliations


Optics Express, Vol. 21, Issue 3, pp. 2718-2726 (2013)
http://dx.doi.org/10.1364/OE.21.002718


View Full Text Article

Acrobat PDF (1548 KB)





Browse Journals / Lookup Meetings

Browse by Journal and Year


   


Lookup Conference Papers

Close Browse Journals / Lookup Meetings

Article Tools

Share
Citations

Abstract

A single passband microwave photonic filter with ultrawide tunable range based on stimulated Brillouin scattering is theoretically analyzed. Combining the gain and loss spectrums, tuning range with 44GHz is obtained without crosstalk by introducing two pumps. Adding more pumps, Tuning range multiplying with the multiplication factor equaling to the total quantity of pump can be achieved, which has potential application in microwave and millimeter wave wireless communication systems.

© 2013 OSA

1. Introduction

Over the past decade a number of tap delay line based microwave photonics (MWP) filters have been proposed and experimentally demonstrated, such as high-order and high Q all-positive coefficients filter [5

5. R. Wu, C. M. Long, D. E. Leaird, and A. M. Weiner, “Directly generated Gaussian-shaped optical frequency comb for microwave photonic filtering and picosecond pulse generation,” IEEE Photon. Technol. Lett. 24(17), 1484–1486 (2012). [CrossRef]

,6

6. T. X. H. Huang, X. Yi, and R. A. Minasian, “A high-order FIR microwave photonic filter,” in International Topical Meeting on Microwave Photonics, 2009. MWP '09(2009), 1–4.

], and negative and complexity coefficients filters [7

7. M. Song, C. M. Long, R. Wu, D. Seo, D. E. Leaird, and A. M. Weiner, “Reconfigurable and tunable flat-top microwave photonic filters utilizing optical frequency combs,” IEEE Photon. Technol. Lett. 23(21), 1618–1620 (2011). [CrossRef]

9

9. B. Vidal, J. L. Corral, and J. Martí, “All-optical WDM multi-tap microwave filter with flat bandpass,” Opt. Express 14(2), 581–586 (2006). [CrossRef] [PubMed]

], aiming at realizing arbitrary bandpass filtering with flat top and sharp transition bands and achieving the tunability without the variation of the entire shape of the frequency response including the free spectral range (FSR) and the 3-dB bandwidth.

However, most microwave photonic filters employing optical delay line structures are limited by its intrinsic periodic spectral response. This is a significant drawback because it restricts the processing frequency to a fraction of FSR in order to avoid spectral overlapping. For wideband operation, it is important to realize microwave photonic filters which have a single passband without baseband response. Kinds of single passband filters have been reported [10

10. J. Mora, B. Ortega, A. Díez, J. L. Cruz, M. V. Andrés, J. Capmany, and D. Pastor, “Photonic microwave tunable single-bandpass filter based on a Mach-Zehnder interferometer,” J. Lightwave Technol. 24(7), 2500–2509 (2006). [CrossRef]

17

17. R. Pant, A. Byrnes, E. Li, D.-Y. Choi, C. G. Poulton, S. Fan, S. J. Madden, B. Luther-Davies, and B. J. Eggleton, “Photonic chip based tunable and dynamically reconfigurable microwave photonic filter using stimulated Brillouin scattering,” in Bragg Gratings, Photosensitivity, and Poling in Glass Waveguides(Optical Society of America, 2012).

]. Among them, the technique based on stimulated Brillouin scattering (SBS) in optical fiber is an attractive approach for implementing high-resolution and large range tuning, and combining with phase modulation (PM) both modulator bias drift problem and baseband resonance can be eliminated. However, the basic tuning range of the present SBS based filters is limited within twice the range of brillouin frequency shift of fiber.

In this paper, we propose and analyze a single-bandpass MPF based on stimulated brillouin scattering together with phase modulation. By combining two adjacent pumps with accurate space, gain and loss of different pumps will overlap to be canceled with each other, and then tuning range multiplying can be obtained by numeric simulation. Theoretically, multiplication factor is equal to the pump quantity, and the continuous tuning range will reach the millimeter wave band when the factor is greater than three, which will lead to a potential application in microwave and millimeter wave wireless communication.

2. Operational principle

The conventional single passband MPF combining PM technique and SBS process has the configuration shown in Fig. 1
Fig. 1 Conventional configuration of the tunable single passband MPF. CW: Continuous Wave, PM: Phase Modulation, EDFA: Erbium-Doped Fiber Amplifier, PC: Polarization Controller, DSF: Dispersion-Shifted Fiber, VNA: Vector Network Analyzer, PD: Photodetector.
. A continuous wave (CW) is sent to the phase modulator via polarization controller (PC). The polarization state of the light wave to the phase modulator is adjusted by the PC to minimize the polarization-dependent loss. The phase modulator is driven by a sinusoidal RF signal with a tunable angular frequency ωm generated by a vector network analyzer (VNA). After the interaction between modulated optical signal and counterpropagating pump wave, the output optical field via circulator is detected by photodetector and then translated to VNA to be analyzed

Mathematically, for small signal modulation the normalized optical field EPM(t) at the output of the phase modulator can be expressed as [18

18. F. Zeng and J. Yao, “Investigation of phase-modulator-based all-optical bandpass microwave filter,” J. Lightwave Technol. 23, 1113– 1117(2005).

]:
E(t)=J0(m)exp(j2πfct)+J1(m)exp{j[2π(fc+fm)t+π2]}J1(m)exp{j[2π(fcfm)tπ2]}
(1)
Where Jn (•) represents the nth-order Bessel function of the first kind with n = 0, 1 and m is the phase modulation index, and fc is the frequency of the laser and fm denotes the frequency of injected RF signal. Obviously, the two first-order sidebands are out of phase: denoted 0 and π in Fig. 2
Fig. 2 Phase modulation spectrum.
. If the phase-modulated signal is applied directly to the PD, no signal would be detected except dc since the beating between the optical carrier and the upper sideband will cancel completely the beating between the optical carrier and the lower sideband due to the fact that the two beat signals are out of phase with a balanced intensity. However, in Fig. 3(a)
Fig. 3 (a) RF passband generation with the SBS process for a single pump (b) RF passband broadened generation with the SBS process for two pumps.
, when introducing counterpropagating narrow linewidth pump wave launched from pump laser, the gain and loss spectrum separated by brillouin frequency shift νB respectively to pump will be generated because of SBS process, which will lead to the broken of intensity balance between two sidebands, and then the corresponding RF signal can be detected by PD. Since the gain and loss exists simultaneously, there will be two passband generated with the interval of 2νB, so the SBS loss caused passband will restrict the channel bandwidth in practical application in order to avoid crosstalk. So the tunable range of conventional SBS based MPFs are confined within 2νB. For the sake of broadening the available tuning range, a method based on loss compensation by another added pump is proposed shown in Fig. 1, where the single pump is replaced by two pumps boxed by red dotted line. When the frequency difference between the two pumps is accurately set as 2νB, the gain of the second pump will compensate the loss caused by the first pump. Therefore the upper sideband after PM will not experience any gain or loss in the overlapping area, also the passband will not be shaped, which results in a broadened tuning range of 4νB as shown in Fig. 3(b). According to this idea, more pumps can be used to increase the tuning range without limitation.

The SBS process occurs in the fiber between the upper sideband and the pump light wave causing the amplification in the gain spectrum region and the attenuation in the loss spectrum region which can be described as follows respectively [19

19. W. Zhang and R. A. Minasian, “Switchable and tunable microwave photonic Brillouin-based filter,” IEEE Photonics Journal 4(5), 1443–1455 (2012). [CrossRef]

]:
g(f)=g0Ip2(ΓB/2)2f2+(ΓB/2)2+jg0Ip4ΓBff2+(ΓB/2)2
(2)
α(f)=g0Ip2(ΓB/2)2f2+(ΓB/2)2jg0Ip4ΓBff2+(ΓB/2)2
(3)
Where g0 and ΓB represent the line-center gain factor and Brillouin linewidth of the fiber, Ip is the intensity of pump wave, and f is the frequency deviation from νB.

Then the electronic field of the output RF signal at the PD can be given as:
ERF(t)=<P>G(fm)A(fm)cos[2πfmt+π2+ϕg(fm)+ϕα(fm)]cos(2πfmt+π2)
(10)
ℜ means the responsivity of PD to the input optical power. Then, the transfer function can be simplified as:

|H(f)|2=PRFoutPRFin1+G(fm)A2(fm)22G(fm)A(fm)cos[ϕg(fm)+ϕα(fm)]
(11)

In order to enlarge the tuning range, two adjacent pumps (fp1 and fp2) are employed with a permanent frequency space with 2νB (namely fp2 -fp1 = 2νB). Then according to Eq. (4), after the SBS process, the optical power input into the PD can be rewritten as:
P2J0(m)J1(m){G1(fm)G2(fm)A1(fm)A2(fm)cos[2πfmt+π2+ϕg1(fm)+ϕα1(fm)+ϕg2(fm)+ϕα2(fm)]cos(2πfmt+π2)}
(12)
From Eq. (6)~(9)
Gk(fm)=exp(Re{g(fpkνB(fc+fm))}L)=exp{g0IpkL2(ΓB/2)2[fpkνB(fc+fm)]2+(ΓB/2)2}
(13)
Ak(fm)=exp(Re{α(fpk+νB(fc+fm))}L)=exp{g0IpkL2(ΓB/2)2[fpk+νB(fc+fm)]2+(ΓB/2)2}
(14)
ϕgk(fm)=Im[g(fpkνB(fc+fm))]L=g0IpkL4ΓB[fpkνB(fc+fm)][fpkνB(fc+fm)]2+(ΓB/2)2
(15)
ϕαk(fm)=Im[α(fpk+νB(fc+fm))]L=g0IpkL4ΓB[fpk+νB(fc+fm)][fpk+νB(fc+fm)]2+(ΓB/2)2
(16)
where k = 1、2.

According to Eq. (11), the transfer function with two pumps can be expressed as:
|H(f)|2=1+G1(fm)G22(fm)A21(fm)2A2(fm)22G1(fm)G2(fm)A1(fm)A2(fm)cos[ϕg1(fm)+ϕα1(fm)+ϕg2(fm)+ϕα2(fm)]
(17)
From Eq. (11) and Eq. (17), a general expression of transfer function with total N pumps can be derived to be:

|H(f)|2=1+k=1NGk(fm)A2k(fm)22[k=1NGk(fm)Ak(fm)]cos{k=1N[ϕgk(fm)+ϕαk(fm)]}
(18)

3. Numeric simulation and discussion

In our numeric simulation, several parameters are assumed: ︱Gmax = ︱Amax = 5dB, ΓB = 30MHz, νB = 11GHz [20

20. P. D. Dragic, “Simplified model for effect of Ge doping on silica fibre acoustic properties,” Electron. Lett. 45(5), 256–257 (2009). [CrossRef]

]. First, only one pump is considered, and the frequency space between carrier and pump is set to be 16GHz (fp-fc = 16GHz).After numeric simulation the frequency response is demonstrated in Fig. 5
Fig. 5 Comparison of frequency response in different number of pump.
as the black curve. From the figure, two passband can be obtained, and the one at the lower frequency is excited by Brillouin gain centered at f01 = 5GHz (f01 equals fp-fc-νB) and the other one excited by Brillouin loss is centered at f02 = 27GHz (f02 equals fp-fc + νB). From the idea mentioned above, when another pump wave with frequency fp1 (fp1 = fp + 2νB) is added, the central frequency f02 should move to 49GHz with passband space of 4νB, which is confirmed by the purple cure shown in Fig. 5. Compared with one pump, the tuning range has been doubled after adding another pump. Also in Fig. 0.5 the blue curve shows the tripled tuning range with 6νB with three pumps. Hence when three pumps are employed, the tunable range can reach 60GHz frequency band, which has potential application in 60GHz millimeter wave radio [21

21. N. Guo, R. C. Qiu, S. S. Mo, and K. Takahashi, “60-GHz millimeter-wave radio: principle, technology, and new Results,” EURASIP J. Wirel. Commun. Netw. 2007, 1–48 (2007). [CrossRef]

]. Therefore by adding more pumps, the tuning range can be enlarged to 2νB multiplying N, where N is equal to the total number of pump.

The tunability is a critical property for MPFs. Two pumps are used to produce 4νB of 44GHz tunable range, and then tuning the two pumps with the same pace, 44GHz continuous tunable range can be realized shown in Fig. 6
Fig. 6 Filter continuous tuning within 44GHz range.
. During this process, the space of the two pumps must be kept constant.

4. Conclusion

A single passband tunable microwave photonic filter based on stimulated brillouin scattering is analyzed numerically. Employing two pumps, 44GHz tuning range is obtained free from crosstalk and the continuous tuning is achieved by changing the frequency space between pumps and carrier. The results also demonstrate that tuning range can be enlarged to 2νB multiplying N which is the total quantity of pump. Overcoming the wavelength stability, the brillouin based filter has potential application in microwave and millimeter wave wireless communication.

Acknowledgments

The authors are grateful to Science and Technology Development Plan of Jilin Province (Grant Nos.20110314, 20120324), the National Natural Science Foundation of China (Grant Nos.61077046, 61274068, 61275035) for the support in the work, and Chinese National Programs for High Technology Research and Development (Grant No.2013AA030902).

References and links

1.

J. Capmany, B. Ortega, and D. Pastor, “A tutorial on microwave photonic filters,” J. Lightwave Technol. 24, 201–229 (2006).

2.

R. A. Minasian, “Photonic signal processing of microwave signals,” IEEE T Microw Theory 54(2), 832–846 (2006). [CrossRef]

3.

J. Yao, “Photonics for microwave signal filtering,” in IEEE Sarnoff Symposium, 2009. SARNOFF '09(2009), 1–5.

4.

V. R. Supradeepa, C. M. Long, R. Wu, F. Ferdous, E. Hamidi, D. E. Leaird, and A. M. Weiner, “Comb-based radiofrequency photonic filters with rapid tunability and high selectivity,” Nat. Photonics 6(3), 186–194 (2012). [CrossRef]

5.

R. Wu, C. M. Long, D. E. Leaird, and A. M. Weiner, “Directly generated Gaussian-shaped optical frequency comb for microwave photonic filtering and picosecond pulse generation,” IEEE Photon. Technol. Lett. 24(17), 1484–1486 (2012). [CrossRef]

6.

T. X. H. Huang, X. Yi, and R. A. Minasian, “A high-order FIR microwave photonic filter,” in International Topical Meeting on Microwave Photonics, 2009. MWP '09(2009), 1–4.

7.

M. Song, C. M. Long, R. Wu, D. Seo, D. E. Leaird, and A. M. Weiner, “Reconfigurable and tunable flat-top microwave photonic filters utilizing optical frequency combs,” IEEE Photon. Technol. Lett. 23(21), 1618–1620 (2011). [CrossRef]

8.

Y. Dai and J. Yao, “Nonuniformly-spaced photonic microwave delayline filter,” Opt. Express 16(7), 4713–4718 (2008). [CrossRef] [PubMed]

9.

B. Vidal, J. L. Corral, and J. Martí, “All-optical WDM multi-tap microwave filter with flat bandpass,” Opt. Express 14(2), 581–586 (2006). [CrossRef] [PubMed]

10.

J. Mora, B. Ortega, A. Díez, J. L. Cruz, M. V. Andrés, J. Capmany, and D. Pastor, “Photonic microwave tunable single-bandpass filter based on a Mach-Zehnder interferometer,” J. Lightwave Technol. 24(7), 2500–2509 (2006). [CrossRef]

11.

X. Yi and R. A. Minasian, “Microwave photonic filter with single bandpass response,” Electron. Lett. 45(7), 362–363 (2009). [CrossRef]

12.

W. Zhang and R. A. Minasian, “Widely Tunable Single-Passband Microwave Photonic Filter Based on Stimulated Brillouin Scattering,” IEEE Photon. Technol. Lett. 23(23), 1775–1777 (2011). [CrossRef]

13.

W. Li, M. Li, and J. Yao, “A narrow-passband and frequency-tunable microwave photonic filter based on phase-modulation to intensity-modulation conversion using a phase-shifted Fiber Bragg Grating,” IEEE T Microw Theory 60(5), 1287–1296 (2012). [CrossRef]

14.

M. Bolea, J. Mora, B. Ortega, and J. Capmany, “Highly chirped single-bandpass microwave photonic filter with reconfiguration capabilities,” Opt. Express 19(5), 4566–4576 (2011). [CrossRef] [PubMed]

15.

T. X. H. Huang, X. Yi, and R. A. Minasian, “Single passband microwave photonic filter using continuous-time impulse response,” Opt. Express 19(7), 6231–6242 (2011). [CrossRef] [PubMed]

16.

Y. M. Chang and J. H. Lee, “Tunable, single passband photonic microwave filter based on stimulated Brillouin scattering in nonlinear fiber,” in IEEE LEOS Annual Meeting Conference Proceedings, 2009. LEOS '09(2009), 654–655.

17.

R. Pant, A. Byrnes, E. Li, D.-Y. Choi, C. G. Poulton, S. Fan, S. J. Madden, B. Luther-Davies, and B. J. Eggleton, “Photonic chip based tunable and dynamically reconfigurable microwave photonic filter using stimulated Brillouin scattering,” in Bragg Gratings, Photosensitivity, and Poling in Glass Waveguides(Optical Society of America, 2012).

18.

F. Zeng and J. Yao, “Investigation of phase-modulator-based all-optical bandpass microwave filter,” J. Lightwave Technol. 23, 1113– 1117(2005).

19.

W. Zhang and R. A. Minasian, “Switchable and tunable microwave photonic Brillouin-based filter,” IEEE Photonics Journal 4(5), 1443–1455 (2012). [CrossRef]

20.

P. D. Dragic, “Simplified model for effect of Ge doping on silica fibre acoustic properties,” Electron. Lett. 45(5), 256–257 (2009). [CrossRef]

21.

N. Guo, R. C. Qiu, S. S. Mo, and K. Takahashi, “60-GHz millimeter-wave radio: principle, technology, and new Results,” EURASIP J. Wirel. Commun. Netw. 2007, 1–48 (2007). [CrossRef]

22.

A. Loayssa, D. Benito, and M. José Garde, “Applications of optical carrier Brillouin processing to microwave photonics,” Opt. Fiber Technol. 8(1), 24–42 (2002). [CrossRef]

OCIS Codes
(070.0070) Fourier optics and signal processing : Fourier optics and signal processing
(290.5900) Scattering : Scattering, stimulated Brillouin
(070.2615) Fourier optics and signal processing : Frequency filtering

ToC Category:
Optical Devices

History
Original Manuscript: December 7, 2012
Revised Manuscript: January 17, 2013
Manuscript Accepted: January 17, 2013
Published: January 28, 2013

Citation
Yongchuan Xiao, Jing Guo, Kui Wu, Pengfei Qu, Huajuan Qi, Caixia Liu, Shengping Ruan, Weiyou Chen, and Wei Dong, "An ultrawide tunable range single passband microwave photonic filter based on stimulated Brillouin scattering," Opt. Express 21, 2718-2726 (2013)
http://www.opticsinfobase.org/oe/abstract.cfm?URI=oe-21-3-2718


Sort:  Author  |  Year  |  Journal  |  Reset  

References

  1. J. Capmany, B. Ortega, and D. Pastor, “A tutorial on microwave photonic filters,” J. Lightwave Technol.24, 201–229 (2006).
  2. R. A. Minasian, “Photonic signal processing of microwave signals,” IEEE T Microw Theory54(2), 832–846 (2006). [CrossRef]
  3. J. Yao, “Photonics for microwave signal filtering,” in IEEE Sarnoff Symposium, 2009. SARNOFF '09(2009), 1–5.
  4. V. R. Supradeepa, C. M. Long, R. Wu, F. Ferdous, E. Hamidi, D. E. Leaird, and A. M. Weiner, “Comb-based radiofrequency photonic filters with rapid tunability and high selectivity,” Nat. Photonics6(3), 186–194 (2012). [CrossRef]
  5. R. Wu, C. M. Long, D. E. Leaird, and A. M. Weiner, “Directly generated Gaussian-shaped optical frequency comb for microwave photonic filtering and picosecond pulse generation,” IEEE Photon. Technol. Lett.24(17), 1484–1486 (2012). [CrossRef]
  6. T. X. H. Huang, X. Yi, and R. A. Minasian, “A high-order FIR microwave photonic filter,” in International Topical Meeting on Microwave Photonics, 2009. MWP '09(2009), 1–4.
  7. M. Song, C. M. Long, R. Wu, D. Seo, D. E. Leaird, and A. M. Weiner, “Reconfigurable and tunable flat-top microwave photonic filters utilizing optical frequency combs,” IEEE Photon. Technol. Lett.23(21), 1618–1620 (2011). [CrossRef]
  8. Y. Dai and J. Yao, “Nonuniformly-spaced photonic microwave delayline filter,” Opt. Express16(7), 4713–4718 (2008). [CrossRef] [PubMed]
  9. B. Vidal, J. L. Corral, and J. Martí, “All-optical WDM multi-tap microwave filter with flat bandpass,” Opt. Express14(2), 581–586 (2006). [CrossRef] [PubMed]
  10. J. Mora, B. Ortega, A. Díez, J. L. Cruz, M. V. Andrés, J. Capmany, and D. Pastor, “Photonic microwave tunable single-bandpass filter based on a Mach-Zehnder interferometer,” J. Lightwave Technol.24(7), 2500–2509 (2006). [CrossRef]
  11. X. Yi and R. A. Minasian, “Microwave photonic filter with single bandpass response,” Electron. Lett.45(7), 362–363 (2009). [CrossRef]
  12. W. Zhang and R. A. Minasian, “Widely Tunable Single-Passband Microwave Photonic Filter Based on Stimulated Brillouin Scattering,” IEEE Photon. Technol. Lett.23(23), 1775–1777 (2011). [CrossRef]
  13. W. Li, M. Li, and J. Yao, “A narrow-passband and frequency-tunable microwave photonic filter based on phase-modulation to intensity-modulation conversion using a phase-shifted Fiber Bragg Grating,” IEEE T Microw Theory60(5), 1287–1296 (2012). [CrossRef]
  14. M. Bolea, J. Mora, B. Ortega, and J. Capmany, “Highly chirped single-bandpass microwave photonic filter with reconfiguration capabilities,” Opt. Express19(5), 4566–4576 (2011). [CrossRef] [PubMed]
  15. T. X. H. Huang, X. Yi, and R. A. Minasian, “Single passband microwave photonic filter using continuous-time impulse response,” Opt. Express19(7), 6231–6242 (2011). [CrossRef] [PubMed]
  16. Y. M. Chang and J. H. Lee, “Tunable, single passband photonic microwave filter based on stimulated Brillouin scattering in nonlinear fiber,” in IEEE LEOS Annual Meeting Conference Proceedings, 2009. LEOS '09(2009), 654–655.
  17. R. Pant, A. Byrnes, E. Li, D.-Y. Choi, C. G. Poulton, S. Fan, S. J. Madden, B. Luther-Davies, and B. J. Eggleton, “Photonic chip based tunable and dynamically reconfigurable microwave photonic filter using stimulated Brillouin scattering,” in Bragg Gratings, Photosensitivity, and Poling in Glass Waveguides(Optical Society of America, 2012).
  18. F. Zeng and J. Yao, “Investigation of phase-modulator-based all-optical bandpass microwave filter,” J. Lightwave Technol.23, 1113– 1117(2005).
  19. W. Zhang and R. A. Minasian, “Switchable and tunable microwave photonic Brillouin-based filter,” IEEE Photonics Journal4(5), 1443–1455 (2012). [CrossRef]
  20. P. D. Dragic, “Simplified model for effect of Ge doping on silica fibre acoustic properties,” Electron. Lett.45(5), 256–257 (2009). [CrossRef]
  21. N. Guo, R. C. Qiu, S. S. Mo, and K. Takahashi, “60-GHz millimeter-wave radio: principle, technology, and new Results,” EURASIP J. Wirel. Commun. Netw.2007, 1–48 (2007). [CrossRef]
  22. A. Loayssa, D. Benito, and M. José Garde, “Applications of optical carrier Brillouin processing to microwave photonics,” Opt. Fiber Technol.8(1), 24–42 (2002). [CrossRef]

Cited By

Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.


« Previous Article  |  Next Article »

OSA is a member of CrossRef.

CrossCheck Deposited