OSA's Digital Library

Optics Express

Optics Express

  • Editor: J. H. Eberly
  • Vol. 7, Iss. 10 — Nov. 6, 2000
  • pp: 329–335
« Show journal navigation

Plasmon-polariton modes guided by a metal film of finite width bounded by different dielectrics

Pierre Berini  »View Author Affiliations


Optics Express, Vol. 7, Issue 10, pp. 329-335 (2000)
http://dx.doi.org/10.1364/OE.7.000329


View Full Text Article

Acrobat PDF (180 KB)





Browse Journals / Lookup Meetings

Browse by Journal and Year


   


Lookup Conference Papers

Close Browse Journals / Lookup Meetings

Article Tools

Share
Citations

Abstract

The properties of some purely bound plasmon-polariton modes guided by an asymmetric waveguide structure composed of a thin lossy metal film of finite width supported by a dielectric substrate and covered by a different dielectric superstrate are presented for what is believed to be the first time. The mode spectrum supported by these structures is quite different from the spectrum supported by corresponding asymmetric slab structures or similar finite-width symmetric waveguides. Unlike these limiting cases, the dispersion with film thickness exhibits an unusual oscillatory character that is explained by a “switching” of constituent interface modes. This mode switching is unique to asymmetric finite-width structures. Above a certain cut-off film thickness, the structure can support a long-ranging mode and its attenuation decreases very rapidly with decreasing film thickness, more so than the long-ranging mode in symmetric structures. Also, the cutoff thickness of the long-ranging mode is larger than the cutoff thickness of the long-ranging mode in the corresponding asymmetric slab waveguide, which implies that propagation along finite-width films is more sensitive to the asymmetry in the structure than propagation along a similar slab structure. Both of these results are potentially useful for the transmission and control of optical radiation.

© Optical Society of America

1. Introduction

It is well-known that an interface between semi-infinite materials having positive and negative dielectric constants can guide electromagnetic surface waves. In the case of a metal-dielectric interface, where the metal has an apparent negative dielectric constant at the optical free-space wavelength of interest, the waves are termed plasmon-polariton waves and propagate as electromagnetic fields coupled to surface plasmons (surface plasma oscillations) comprised of conduction electrons in the metal. A metal film of a certain thickness bounded by dielectrics above and below can serve as an optical slab (infinitely wide) waveguide. When the film is thin enough, the plasmon-polariton modes guided by the top and bottom interfaces become coupled due to field tunneling through the metal, thus creating supermodes that exhibit dispersion with metal thickness. The modes supported by infinitely wide symmetric and asymmetric metal film structures are well-known; some notable published works include references [1

1. A. D. Boardman, Editor, “Electromagnetic Surface Modes,” (Wiley Interscience, 1982).

3

3. F. Yang, J. R. Sambles, and G. W. Bradberry, “Long-Range Surface Modes Supported by Thin Films,” Phys. Rev. B 44, 5855–5872 (1991). [CrossRef]

].

Metal films of finite thickness and finite width offer 2-D field confinement in the plane transverse to the direction of propagation. These waveguides may prove to be quite useful since they can be used in principle for optical signal transmission and routing over short distances or to construct passive components such as couplers and power splitters. The purely bound mode spectrum guided by symmetric structures comprised of a thin metal film of finite width embedded in a homogeneous dielectric has recently been investigated theoretically [4

4. P. Berini, “Plasmon-Polariton Waves Guided by Thin Lossy Metal Films of Finite Width: Bound Modes of Symmetric Structures,” Phys. Rev. B 61, 10484–10503 (2000). [CrossRef]

], and results suggest that power attenuation values near 0.1 dB/cm are achievable with even lower values possible. The operation of straight waveguide segments has recently been demonstrated in an end-fire experiment [5

5. R. Charbonneau, P. Berini, E. Berolo, and E. Lisicka-Shrzek, “Experimental observation of plasmon-polariton waves supported by a thin metal film of finite width,” Opt. Lett. 25, 844–846 (2000). [CrossRef]

]. The results obtained so far suggest that finite-width structures may find widespread use as an integrated optics technology. Further research work along this direction is thus motivated.

Asymmetric structures, comprised of a metal film of finite width bounded by different substrate and superstrate dielectrics, form an important class of waveguides, yet such structures had hitherto not been studied either theoretically or experimentally. This paper reports the first set of results describing some of the waveguiding characteristics of these structures. Their operation differs significantly from the operation of corresponding asymmetric slab waveguides or similar symmetric finite-width structures.

2. Mode Dispersion and Evolution With Film Thickness

The structure of interest is shown as the inset in Figure 1 (a). It consists of a metal film of thickness t, width w and equivalent permittivity ε2, supported by a semi-infinite homogeneous dielectric substrate of permittivity ε1 and covered by a semi-infinite homogeneous dielectric superstrate of permittivity ε3. The Cartesian coordinate axes used for the analysis are also shown. The structure is invariant along the propagation axis (z axis, out of the page). The mode fields vary along this dimension according to e- γz where γ=α+jβ is the complex propagation constant of the mode, α being its attenuation constant and β its phase constant. Material parameters taken from the standard work on slab structures [2

2. J. J. Burke, G. I. Stegeman, and T. Tamir, “Surface-Polariton-Like Waves Guided by Thin, Lossy Metal Films,” Phys. Rev. B 33, 5186–5201 (1986). [CrossRef]

] were used in order to facilitate comparisons: the optical free space wavelength of analysis is set to λ0=0.633 µm, the metal film is silver, which has at the wavelength of interest a relative permittivity of εr,2=-19 - j0.53, and the relative permittivity of the bottom and top dielectric regions are set to εr,1=4 and εr,3=3.61, respectively.

The study consists of the analysis of the structure shown as the inset in Figure 1 (a) for the case w=1 µm and the material parameters given above. The dispersion with film thickness of the first 5 purely bound modes has been computed using the MoL and the resulting curves are shown in Figure 1. The dispersion curves of the ab and sb modes guided by the corresponding slab waveguide (w=∞) are given for comparison. The dispersion curve of the long-ranging ssb0 mode guided by a corresponding symmetric structure (w=1 µm, εr,1r,3=4) is also shown as the curve labeled ssb0,sym.

In asymmetric structures of the type considered in this paper, true field symmetry exists only with respect to the y axis. With respect to the horizontal dimension, the modes have a symmetric-like or asymmetric-like field distribution with field localization along either the bottom or top metal-dielectric interface. As in slab structures, the modes that have a symmetric-like distribution with respect to the horizontal dimension are localized along the metal-dielectric interface with the lowest dielectric constant, while modes that have an asymmetric-like distribution with respect to this axis are localized along the metal-dielectric interface with the highest dielectric constant.

The modes supported by finite-width structures are not TM in nature but for films where w/t>1, the Ey field component dominates. The nomenclature discussed in [4

4. P. Berini, “Plasmon-Polariton Waves Guided by Thin Lossy Metal Films of Finite Width: Bound Modes of Symmetric Structures,” Phys. Rev. B 61, 10484–10503 (2000). [CrossRef]

] to describe the modes supported by symmetric structures can be used to describe the modes guided by asymmetric structures. However, care must be taken to identify the modes when the metal film is optically thick, before significant field coupling begins to occur through the film and while the origin of the mode can be identified unambiguously. The number of extrema in the Ey field component of the mode is counted along the lateral dimension at the metal-dielectric interface where the field is localized and this number is then used in the nomenclature.

The sab0, aab0, ssb0 and asb0 modes are the fundamental modes guided by the structure shown as the inset of Figure 1 (a). The sab0 and aab0 modes are comprised of coupled corner modes, resembling the corresponding modes in a similar symmetric structure, except that the fields are localized at the substrate-metal interface. These two modes do not change in character as the thickness of the film decreases and a reduction in film width would eventually break the degeneracy shown in Figure 1. The behavior of these modes as the thickness of the film is reduced is consistent with their behavior in symmetric structures.

It was noted in [4

4. P. Berini, “Plasmon-Polariton Waves Guided by Thin Lossy Metal Films of Finite Width: Bound Modes of Symmetric Structures,” Phys. Rev. B 61, 10484–10503 (2000). [CrossRef]

] that the modes supported by a metal film of finite width are in fact supermodes created from a coupling of “edge” and “corner” modes supported by each metal-dielectric interface defining the structure. As the dimensions of the metal film change, the level of coupling between the interface modes changes, leading to dispersion and possibly a change in character of the supermode. The results of the current study further support this view. In asymmetric structures, the modes are also supermodes created in a similar manner, except that dissimilar interface modes may couple to each other to create the supermode. For instance, a mode having one field extremum along the top interface (along the metal-superstrate edge between the corners) may couple with a mode having three field extrema along the bottom interface. The selection criteria dictating which interface modes will couple to form a supermode are: a sharing of field symmetry with respect to the vertical axis and a similarity in the value of their propagation constants. As the film dimensions change, the interface modes selected can also change, leading to unexpected behavior in the supermode. This is in contrast to symmetric structures, where identical interface modes only will couple to form the supermode, and in this case, mode behavior with changing film dimensions is easily predictable.

Fig. 1. Dispersion characteristics of some purely bound modes supported by an asymmetric metal film waveguide of width w=1 µm. (a) Normalized phase constant. (b) Normalized attenuation constant.

3. Long-ranging mode

Fig. 2. Spatial distribution of the Ey field component related to the ssb0 and asb0 modes for two film thicknesses. The waveguide cross-section is located in the x-y plane and the metal region is outlined as the rectangular dashed contour. The field distributions are normalized such that max|ℜ{Ey}|=1.

Figure 3 shows contour plots of ℜ{Sz} associated with the ssb1 mode for four film thicknesses. Sz is the z-directed component of the Poynting vector and its spatial distribution is computed from the spatial distribution of the mode fields using Sz=(ExHy* - EyHx*)/2 where * denotes the complex conjugate. From this figure it is noted that the top and bottom interface modes comprising this supermode are indeed different from each other. From part (a), it is seen that the bottom interface mode has three extrema, and thus is of higher order than the top interface mode which has one extremum between the corners. In this structure, the substrate has a higher dielectric constant than the superstrate so the phase constant of a particular substrate-metal interface mode is higher than the phase constant of the same mode at the metal-superstrate interface. Higher-order modes have in general smaller values of phase constant compared to lower-order modes, so in structures having ε31, all supermodes are comprised of a bottom interface mode of the same order or higher than the top interface mode. If ε31 then the opposite situation occurs. As mentioned earlier the particular interface modes that are selected share a symmetry along the vertical axis and have similar propagation constants.

A careful inspection of the fields associated with the ssb1 mode at various film thicknesses reveals that as the thickness of the film decreases, the mode fields evolve in a smooth manner but in addition a change or “switch” of the constituent interface and/or corner modes also occurs. In all cases, such changes are consistent with the directions taken by the dispersion curve as the film thickness decreases, thus explaining the oscillations in the curve for this mode seen Figure 1. In particular, a change of the bottom edge mode occurs near t=27 nm and results in a peak in the attenuation curve of the mode near this thickness as seen in Figure 1 (b). This change of the bottom interface mode is also apparent by comparing parts (c) and (d) of Figure 3.

Though the attenuation of the ssb1 mode drops quickly near its cut-off thickness, it should be remembered that the field confinement does so as well. Part (d) of Figure 3 corresponds to a film thickness slightly above cutoff, representative of a thickness that would be used to observe this long-ranging mode experimentally. Comparing parts (a) and (d) reveals that the mode fields do indeed extend further into the background dielectrics as the thickness of the film is reduced. Furthermore, it is observed from part (d) that near cutoff the fields have strong extrema along the top and bottom interfaces. These extrema may result in increased coupling losses in an end-fire configuration compared to the ssb0 mode of a symmetric structure since field distributions would not overlap as cleanly. Also, the fact that the mode would be used near its cutoff thickness implies that very tight tolerances are required in the fabrication of structures and that all metal-dielectric interfaces should be of the highest quality. Nevertheless, it should be possible to observe propagation of this mode in a suitable structure excited in an end-fire manner.

Fig. 3. Contour plot of ℜ{Sz} associated with the long-ranging ssb1 mode as a function of film thickness. In all cases, the outline of the metal film is shown as the rectangular dashed contour.

It is also noted from Figure 1 that the cutoff thickness of the ssb1 mode (t ~22 nm) is greater than the cutoff thickness of the sb mode (t ~18 nm) supported by the corresponding slab structure. This implies that a long-ranging mode guided by a thin narrow metal film is more sensitive to differences in the superstrate and substrate permittivities than the sb mode supported by the corresponding slab structure. This is reasonable in light of the fact that in finite-width structures the mode fields tunnel through the metal as in slab structures, but in addition the fields also wrap around the metal film. This enhanced sensitivity of long-ranging modes in thin metal films of finite width to structure asymmetry is potentially useful, in that a small induced change in substrate or superstrate refractive index has a greater impact on propagation compared to corresponding slab structures.

4. Conclusion

References and Links

1.

A. D. Boardman, Editor, “Electromagnetic Surface Modes,” (Wiley Interscience, 1982).

2.

J. J. Burke, G. I. Stegeman, and T. Tamir, “Surface-Polariton-Like Waves Guided by Thin, Lossy Metal Films,” Phys. Rev. B 33, 5186–5201 (1986). [CrossRef]

3.

F. Yang, J. R. Sambles, and G. W. Bradberry, “Long-Range Surface Modes Supported by Thin Films,” Phys. Rev. B 44, 5855–5872 (1991). [CrossRef]

4.

P. Berini, “Plasmon-Polariton Waves Guided by Thin Lossy Metal Films of Finite Width: Bound Modes of Symmetric Structures,” Phys. Rev. B 61, 10484–10503 (2000). [CrossRef]

5.

R. Charbonneau, P. Berini, E. Berolo, and E. Lisicka-Shrzek, “Experimental observation of plasmon-polariton waves supported by a thin metal film of finite width,” Opt. Lett. 25, 844–846 (2000). [CrossRef]

6.

L. Wendler and R. Haupt, “Long-Range Surface Plasmon-Polaritons in Asymmetric Layer Structures,” J. Appl. Phys. 59, 3289–3291(1986). [CrossRef]

OCIS Codes
(130.2790) Integrated optics : Guided waves
(240.6680) Optics at surfaces : Surface plasmons

ToC Category:
Research Papers

History
Original Manuscript: October 4, 2000
Published: November 6, 2000

Citation
Pierre Berini, "Plasmon-polariton modes guided by a metal film of finite width bounded by different dielectrics," Opt. Express 7, 329-335 (2000)
http://www.opticsinfobase.org/oe/abstract.cfm?URI=oe-7-10-329


Sort:  Journal  |  Reset  

References

  1. A. D. Boardman, Editor, "Electromagnetic Surface Modes," (Wiley Interscience, 1982).
  2. J. J. Burke, G. I. Stegeman and T. Tamir, "Surface-Polariton-Like Waves Guided by Thin, Lossy Metal Films," Phys.Rev.B 33, 5186-5201 (1986). [CrossRef]
  3. F. Yang, J. R. Sambles and G. W. Bradberry, "Long-Range Surface Modes Supported by Thin Films," Phys.Rev.B 44, 5855-5872 (1991). [CrossRef]
  4. P. Berini, "Plasmon-Polariton Waves Guided by Thin Lossy Metal Films of Finite Width: Bound Modes of Symmetric Structures," Phys. Rev. B 61, 10484-10503 (2000). [CrossRef]
  5. R. Charbonneau, P. Berini, E. Berolo and E. Lisicka-Shrzek, "Experimental observation of plasmon-polariton waves supported by a thin metal film of finite width," Opt. Lett. 25, 844-846 (2000). [CrossRef]
  6. L. Wendler and R. Haupt, "Long-Range Surface Plasmon-Polaritons in Asymmetric Layer Structures," J. Appl. Phys. 59, 3289-3291(1986). [CrossRef]

Cited By

Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.

Figures

Fig. 1. Fig. 2. Fig. 3.
 

Next Article »

OSA is a member of CrossRef.

CrossCheck Deposited