Abstract

A new four-channel partial polarimeter was designed for use in time-resolved ellipsometry measurements. The device outputs four parallel, equispaced beams from a single input beam. By detecting and digitizing the intensities of these four beams, the intensity, as well as two of the three elements of the reduced Stokes vector can be determined. Since there are no moving parts to the polarimeter, time resolution is limited only by the response time of the photodetectors and the digitizers. The linear array of output beams is ideal for streak-camera detection, yielding a potential time resolution of ∼1 psec. A beam splitter is described that separates the input beam into two beams, which are parallel to the input beam and whose polarizations are nearly the same as the input beam. In addition, the polarimeter is achromatic, operating in the wavelength region from 220 to 1100 nm.

© 1987 Optical Society of America

Time-resolved ellipsometry

Gerald E. Jellison and Douglas H. Lowndes
Appl. Opt. 24(18) 2948-2955 (1985)

Polarization-resolved second harmonic generation microscopy with a four-channel Stokes-polarimeter

Nirmal Mazumder, Jianjun Qiu, Matthew R. Foreman, Carlos Macías Romero, Chih-Wei Hu, Han-Ruei Tsai, Peter Török, and Fu-Jen Kao
Opt. Express 20(13) 14090-14099 (2012)

Integrated polarimeters based on anisotropic photodetectors

R. M. A. Azzam
Opt. Lett. 12(8) 555-557 (1987)

Signal-to-noise ratio analysis of one- and two-channel halfwave plate polarimeters

James W. Wagner and John B. Deaton
Appl. Opt. 26(11) 2240-2244 (1987)

Spatially resolved scattering polarimeter

Thomas Kohlgraf-Owens and Aristide Dogariu
Opt. Lett. 34(9) 1321-1323 (2009)