Abstract

The threshold for explosive vaporization of a liquid layer on an opaque solid surface heated by an ultraviolet excimer pulsed laser is studied by a photoacoustic probe-beam deflection method. The probe beam traverses the liquid in the vicinity of the laser-heated liquid–solid interface. Below the explosion threshold, photoacoustic generation in the solid occurs only through a thermoelastic mechanism, which results mainly in shear waves that do not couple well into the liquid. Above the explosion threshold, photoacoustic pulses in the solid are also produced by explosive recoil, hence producing longitudinal pulses in the solid that couple well into the liquid after reflections. By setting the probe-beam refraction to detect longitudinal pulse echoes coupled back into the liquid, a sensitive detection of the explosive threshold can be established.

© 1992 Optical Society of America

Delay of explosive vaporization in pulsed laser-heated droplets

Bae-Sig Park, A. Biswas, R. L. Armstrong, and R. G. Pinnick
Opt. Lett. 15(4) 206-208 (1990)

Light-beam deflection by cesium vapor in a transverse-magnetic field

R. Schlesser and A. Weis
Opt. Lett. 17(14) 1015-1017 (1992)

Experimental observation of beams’ self-deflection appearing with two-dimensional spatial soliton propagation in bulk Kerr material

A. Barthelemy, C. Froehly, S. Maneuf, and E. Reynaud
Opt. Lett. 17(12) 844-846 (1992)

Optically induced lensing effects in Nd³⁺-doped laser glass measured by photothermal beam-deflection spectroscopy

U. Hömmerich, H. Eilers, E. Strauss, and W. M. Yen
Opt. Lett. 17(3) 213-214 (1992)

Surface-stabilized holography in an azo-dye-doped liquid crystal

Alan G.-S. Chen and David J. Brady
Opt. Lett. 17(17) 1231-1233 (1992)