|
Simple, flexible calibration of phase calculation-based three-dimensional imaging system |
Optics Letters, Vol. 36, Issue 7, pp. 1257-1259 (2011)
http://dx.doi.org/10.1364/OL.36.001257
Enhanced HTML 
Acrobat PDF (362 KB)
Abstract
One important step of phase-based three-dimensional imaging system is calibration, which defines the relationship between phase and depth data. Existing calibration methods are complicated and hard to carry out because of using a translation stage or gauge block in a laboratory environment. This Letter introduces a new simple, flexible calibration method by using a checkerboard and a white plate having discrete markers with known separation. The checkerboard determines the internal parameters of a CCD camera. The plate gives phase and depth data of each pixel to establish their relationship. Experimental results and performance evaluation show that the proposed calibration method can reliably build up the accurate relationship between phase map and depth data in a simple, flexible way.
© 2011 Optical Society of America
OCIS Codes
(110.6880) Imaging systems : Three-dimensional image acquisition
(120.2830) Instrumentation, measurement, and metrology : Height measurements
(150.6910) Machine vision : Three-dimensional sensing
(150.1488) Machine vision : Calibration
ToC Category:
Machine Vision
History
Original Manuscript: February 14, 2011
Revised Manuscript: March 3, 2011
Manuscript Accepted: March 4, 2011
Published: March 30, 2011
Virtual Issues
Vol. 6, Iss. 5 Virtual Journal for Biomedical Optics
Citation
Zonghua Zhang, Haiyan Ma, Tong Guo, Sixiang Zhang, and Jinping Chen, "Simple, flexible calibration of phase calculation-based three-dimensional imaging system," Opt. Lett. 36, 1257-1259 (2011)
http://www.opticsinfobase.org/ol/abstract.cfm?URI=ol-36-7-1257
You do not have subscription access to this journal. Citation lists with outbound citation links are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Log in to access OSA Member Subscription
You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Log in to access OSA Member Subscription
You do not have subscription access to this journal. Figure files are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Log in to access OSA Member Subscription
You do not have subscription access to this journal. Article level metrics are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Log in to access OSA Member Subscription
Related Journal Articles 
- Non-laser-based scanner for three-dimensional digitization of historical artifacts (AO)
- Multiple-step triangular-pattern phase shifting and the influence of number of steps and pitch on measurement accuracy (AO)
- Intensity-ratio error compensation for triangular-pattern phase-shifting profilometry (JOSAA)
- Three-dimensional shape measurement with a fast and accurate approach (AO)
- Simple calibration of a phase-based 3D imaging system based on uneven fringe projection (OL)
Related Conference Papers
- View Point Tracking for Autostereoscopic Displays Using a Low Cost 3D CMOS Imager
- Accuracy Enhancement of Fringe-Projection Based 3-D Imaging
- Accuracy Enhancement of Fringe-Projection Based 3-D Imaging
- Stand-off Biometric Identification using Fourier Transform Profilometry for 2D+3D Face Imaging
- 2D+3D Face Imaging for Stand-off Biometric Identification
« Previous Article | Next Article »
OSA is a member of 