|
|
High power all-fibered femtosecond master oscillator power amplifier at 1.56 μm |
Optics Letters, Vol. 37, Issue 15, pp. 3186-3188 (2012)
http://dx.doi.org/10.1364/OL.37.003186
Enhanced HTML
Acrobat PDF (395 KB)
Abstract
Direct amplification of output from chirped pulse oscillator (CPO) to 3.3 W of average power (pulse energy of 118 nJ in 20 ps pulse duration before compression) was achieved in a properly designed cladding pumped large mode area Er-doped fiber. Various configurations of CPO cavity with different FWHM of output spectrum and pulse duration were investigated. Fourier limit compression with 480 fs pulse duration and 32 kW peak power has been obtained for pulses with 14.8 nm FWHM spectrum. Subsequent nonlinear compression in a standard SMF-28 fiber yielded pulses as short as 145 fs.
© 2012 Optical Society of America
OCIS Codes
(060.2320) Fiber optics and optical communications : Fiber optics amplifiers and oscillators
(140.3510) Lasers and laser optics : Lasers, fiber
(140.4050) Lasers and laser optics : Mode-locked lasers
ToC Category:
Fiber Optics and Optical Communications
History
Original Manuscript: February 17, 2012
Revised Manuscript: June 4, 2012
Manuscript Accepted: June 22, 2012
Published: July 25, 2012
Citation
D. A. Gaponov, L. V. Kotov, M. E. Likhachev, M. M. Bubnov, A. Cabasse, J.-L. Oudar, S. Fevrier, D. S. Lipatov, N. N. Vechkanov, A. N. Guryanov, and G. Martel, "High power all-fibered femtosecond master oscillator power amplifier at 1.56 μm," Opt. Lett. 37, 3186-3188 (2012)
http://www.opticsinfobase.org/ol/abstract.cfm?URI=ol-37-15-3186
You do not have subscription access to this journal. Citation lists with outbound citation links are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Log in to access OSA Member Subscription
You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Log in to access OSA Member Subscription
You do not have subscription access to this journal. Figure files are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Log in to access OSA Member Subscription
You do not have subscription access to this journal. Article level metrics are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Log in to access OSA Member Subscription





OSA is a member of 