Electro-optic adiabatic wavelength shifting and <i>Q</i> switching demonstrated using a p-i-n integrated photonic crystal nanocavity

doi:10.1364/OL.35.003895

« Show journal navigation

Electro-optic adiabatic wavelength shifting and Q switching demonstrated using a p-i-n integrated photonic crystal nanocavity

Takasumi Tanabe, Eiichi Kuramochi, Hideaki Taniyama, and Masaya Notomi »View Author Affiliations

Optics Letters, Vol. 35, Issue 23, pp. 3895-3897 (2010)
http://dx.doi.org/10.1364/OL.35.003895

View Full Text Article

Acrobat PDF (393 KB)

Journal Search
Article Lookup

Article Tools

Citations

Alert me when this article is cited
Export Citation/Save

Article Navigation

▸ Article Outline
– Abstract
– References and links

Article Tools
Full Text
Article Info
References
Cited By
Figures
Metrics
Download PDF

Viewing Equations in the
HTML Article

Optimal Viewing Recommendations

Full Text
Article Info
References (15)
Cited By
Figures (3)
Metrics

Abstract

We demonstrate adiabatic wavelength shifting by electro-optic modulation, using a p-i-n integrated high-Q photonic crystal nanocavity. The wavelength of the trapped light is adiabatically shifted by modulating the resonance of the cavity faster than the photon lifetime. The cavity resonance is changed by injecting electrons through a p-i-n junction to reduce the refractive index. In addition, we employ adiabatic wavelength shifting in a demonstration of dynamic Q tuning by electro-optic modulation.

A high-Q photonic crystal (PhC) nanocavity can trap light for a very long time in a tiny space [1

T. Tanabe, M. Notomi, E. Kuramochi, A. Shinya, and H. Taniyama, Nat. Photon. 1, 49 (2007). [CrossRef]

, 2

S. Noda, M. Fujita, and T. Asano, Nat. Photon. 1, 449 (2007). [CrossRef]

]. Photons generally travel much faster than electrons, which makes the direct manipulation of photons difficult. When we can trap light in a small cavity for a period longer than the electrical modulation speed, we may be able to directly manipulate light properties, such as the wavelength. Recently, a new concept for changing the wavelength of light, which we call adiabatic wavelength shifting (AWS), was proposed [3

M. Notomi and S. Mitsugi, Phys. Rev. A 73, 051803(R) (2006). [CrossRef]

] and demonstrated [4

S. Preble, Q. Xu, and M. Lipson, Nat. Photon. 1, 293 (2007). [CrossRef]

, 5

M. McCutcheon, A. P. Abraham, G. Rieger, and J. Young, Opt. Express 15, 11472 (2007). [CrossRef] [PubMed]

, 6

T. Tanabe, M. Notomi, H. Taniyama, and E. Kuramochi, Phys. Rev. Lett. 102, 043907 (2009). [CrossRef] [PubMed]

] using high-Q micro and nanocavities. AWS can be explained by anal ogy with a guitar string. When we pluck the string and then change its tension, the pitch will change. The same phenomenon occurs with photons. When we trap photons in an ultra-high-Q cavity and rapidly change its resonance, the wavelength of the trapped light should follow the cavity resonance, because the photons cannot escape. This type of classical wavelength conversion has not been considered for optics, because it was previously impossible to change the resonant wavelength of a small cavity within the photon lifetime. Proof-of-principle demonstrations of AWS have already been performed by pumping ultra-high-Q cavities from the top of a silicon (Si) slab to change the cavity resonance by employing the carrier plasma dispersion effect.

In this Letter, we demonstrate AWS in an ultrahigh-Q cavity system but by using electro-optic (EO) modulation. EO modulation is achieved by integrating a p-i-n junction with the PhC nanocavity [7

T. Tanabe, K. Nishiguchi, E. Kuramochi, and M. Notomi, Opt. Express 17, 22505 (2009). [CrossRef]

, 8

T. Tanabe, H. Sumikura, H. Taniyama, A. Shinya, and M. Notomi, Appl. Phys. Lett. 96, 101103 (2010). [CrossRef]

]. We also discuss and demonstrate an EO Q switch with smallest size as an application of AWS. Although Q switching has been realized by optical pumping [6

T. Tanabe, M. Notomi, H. Taniyama, and E. Kuramochi, Phys. Rev. Lett. 102, 043907 (2009). [CrossRef] [PubMed]

, 9

Q. Xu, P. Dong, and M. Lipson, Nature Phys. 3, 406 (2007). [CrossRef]

, 10

Y. Tanaka, J. Upham, T. Nagashima, T. Sugiya, T. Asano, and S. Noda, Nat. Mater. 6, 862 (2007). [CrossRef] [PubMed]

], the demonstration of a p-i-n integrated EO Q-switch [11

S. Manipatruni, C. Poitras, Q. Xu, and M. Lipson, Opt. Lett. 33, 1644 (2008). [CrossRef] [PubMed]

] is essential for the future development of integrated photonic memories on chips.

Figure 1a is a schematic illustration of a fabricated

p - i - n

integrated PhC nanocavity. The fabrication process is detailed elsewhere [7

T. Tanabe, K. Nishiguchi, E. Kuramochi, and M. Notomi, Opt. Express 17, 22505 (2009). [CrossRef]

]. The PhC nanocavity consists of a width-modulated line defect [12

E. Kuramochi, M. Notomi, S. Mitsugi, A. Shinya, T. Tanabe, and T. Watanabe, Appl. Phys. Lett. 88, 041112 (2006). [CrossRef]

], and it is coupled to the input and output waveguides through barrier line defects that have a width of

0.98 a \sqrt{3}

(W0.98).[13

E. Kuramochi, H. Taniyama, T. Tanabe, A. Shinya, and M. Notomi, Appl. Phys. Lett. 93, 111112 (2008). [CrossRef]

] The input and output waveguides are slightly wider, at W1.05. Figure 1b shows the measured transmittance spectrum. It exhibits a Q of

7.5 \times 10^{5}

, which corresponds to a photon lifetime of

0.63 ns

. Figures 1c, 1d are the electrical signals that we employed for our experiments. The positive voltage signal is applied to the p junction and the negative one to the n junction. [Note that both Figs. 1c, 1d are forward bias signals.] The current is

2.8 μA

when a total of

6 V

is applied between the p and n junctions. Figure 1e shows the EO-modulated output optical waveform when a cw laser is applied at the cavity resonance. It shows that the EO modulation speed is about

\sim 0.5 ns

, which is about the same as the photon lifetime of the nanocavity, and this makes our demonstration possible. The small peak that appears at

\sim 0.4 ns

results from the EO Q switching that we describe later.

First, we performed a wavelength resolved photon lifetime measurement. It was basically the same as the measurement that we described in a previous study [6

T. Tanabe, M. Notomi, H. Taniyama, and E. Kuramochi, Phys. Rev. Lett. 102, 043907 (2009). [CrossRef] [PubMed]

]. Briefly, we input a cw laser light that was in resonance with the PhC nanocavity (

1589.78 nm

) to charge the cavity with photons. Then the input light was suddenly turned off at

t = 0 ps

to enable us to observe the emission of the caged photons from the PhC nanocavity. The input power level is kept very low in order to prevent the cavity exibiting any nonlinear effect. The output power exhibited an exponential decay, and this gave

τ_{ph}

. We placed a monochromator with a wavelength resolution of

0.04 nm

in front of the point at which we measured the waveform. A two-dimensional image was obtained by changing the wavelength of the monochromator after each waveform measurement.

The measured spectrograms from the PhC nanocavity are shown in Fig. 2. When no modulation was applied, the output light contained only the original input wavelength, as shown in Fig. 2a. We applied a forward bias voltage to the

p - i - n

junction, to inject electrons and holes. This reduced the refractive index of Si as a result of the carrier plasma dispersion effect, and the cavity resonance was modulated to a shorter wavelength. Therefore, when we apply a forward bias during the cavity decay, we should observe AWS. Figure 2b shows the output spectrogram when EO modulation was applied at

t ≃ 300 ps

. The generation of a short wavelength component is clearly visible in the spectrogram. This light wavelength did not enter the PhC nanocavity. We were able to resolve the adiabatic transition of the light wavelength in time, because the photon lifetime and the modulation speed are about the same. (In contrast, we need to inject carriers much faster than the photon lifetime if we want to achieve larger wavelength shift.) Figure 2b shows that the cavity maintains single mode throughout the process and the wavelength is shifting continuously. All of these observations are direct evidence of AWS [6

T. Tanabe, M. Notomi, H. Taniyama, and E. Kuramochi, Phys. Rev. Lett. 102, 043907 (2009). [CrossRef] [PubMed]

To study the phenomena in greater detail, we obtained a cross-sectional image along the temporal axis of the spectrograms in Figs. 2a, 2b, and plotted them in Fig. 2c. When the cavity is not modulated, the output waveform exhibits a smooth exponential decay that gives the original photon lifetime. But once the cavity is modulated, the output waveform of the original wavelength exhibits a sharp decay, and a shorter wavelength component starts to appear. The clear generation of a short wavelength component is confirmed.

It should be noted that AWS can convert a light wavelength without loss of coherence. In addition, unlike the conventional nonlinear wavelength conversion process, the conversion efficiency of the AWS does not depend on the trapped light intensity, and it can be performed on a single photon. These will be powerful features when we attempt to use this device operation for quantum optics applications.

Next, we discuss the dynamic tuning of the Q of an ultrasmall PhC nanocavity by EO modulation. Although a high-Q cavity can store photons for a long time, the high Q will limit its speed. We need a high-Q for storing photons, but we need to switch to a low-Q mode for the faster charging and release of the optical pulses. A number of groups, including ours, have already reported the successful demonstration of the dynamic tuning of the Q on a Si chip [6

T. Tanabe, M. Notomi, H. Taniyama, and E. Kuramochi, Phys. Rev. Lett. 102, 043907 (2009). [CrossRef] [PubMed]

, 9

Q. Xu, P. Dong, and M. Lipson, Nature Phys. 3, 406 (2007). [CrossRef]

, 10

Y. Tanaka, J. Upham, T. Nagashima, T. Sugiya, T. Asano, and S. Noda, Nat. Mater. 6, 862 (2007). [CrossRef] [PubMed]

]. However, in these studies, the modulation is performed by optical pumping from the top of the slab, and such a scheme does not allow chip integration. As far as we know, the

p - i - n

PhC nanocavity is the smallest EO Q switch cavity. Therefore, a demonstration of the EO Q switching of an ultrasmall PhC nanocavity will be an important step toward the development of a chip-integrated photon memory.

In a previous paper, we demonstrated the release of a short pulse from an ultra-high-Q PhC nanocavity as an application of AWS [6

T. Tanabe, M. Notomi, H. Taniyama, and E. Kuramochi, Phys. Rev. Lett. 102, 043907 (2009). [CrossRef] [PubMed]

]. The operating principle described here is the same, except that we employ electrical injection instead of optical pumping. We know that the frequency mode gap of the W0.98 line defect lies at a higher frequency than that of the width-modulated line- defect cavity. This enables the strong confinement of photons in the cavity (high-Q mode), because the cavity is isolated from the waveguides. When we shorten the wavelength (higher frequency) of the trapped light by AWS, the cavity mode becomes closer to the mode-gap frequency of the W0.98 line defect. This strengthens the coupling between the cavity and the waveguides, resulting in a low-Q mode.

To demonstrate Q switching, we performed the same experiment as in Fig. 2 but fed the output directly into the optical waveform measurement apparatus. Figure 3 shows the recorded waveform with and without EO modulation. When we modulated the device, we observed a small increase in the output light, which is the result of Q switching. It shows that the coupling between the cavity and the output waveguide became stronger owing to the AWS. The pulse readout speed to the output waveguide also became faster. Note that the modulation of the photon lifetime is produced by the modulation of the waveguide-cavity coupling and by free-carrier absorption (FCA).

Although the Q-switching contrast obtained in Fig. 3 is currently not very large, it can be improved by increasing the EO modulation speed. We found that i region was too wide and the resistance of the n junction was too high (due to an imperfect doping condition) for achieving high speed. Let us assume that we want to obtain a memory contrast time of 1 byte (8 bits). Because we need to switch the Q faster than the photon lifetime of the low-Q mode, we need a modulation speed that is at least 8 times faster than the photon lifetime in the high-Q mode. A speed higher than

10 GHz

has been achieved in Si microring

p - i - n

modulators [14

Q. Xu, S. Manipatruni, B. Schmidt, J. Shakya, and M. Lipson, Opt. Express 15, 430 (2007). [CrossRef] [PubMed]

, 15

A. Liu, L. Liao, D. Rubin, H. Nguyen, B. Ciftcioglu, Y. Chetrit, N. Izhaky, and M. Paniccia, Opt. Express 15, 660 (2007). [CrossRef] [PubMed]

], and a higher Q has been achieved in PhC nanocavities [1

T. Tanabe, M. Notomi, E. Kuramochi, A. Shinya, and H. Taniyama, Nat. Photon. 1, 49 (2007). [CrossRef]

, 2

S. Noda, M. Fujita, and T. Asano, Nat. Photon. 1, 449 (2007). [CrossRef]

], thus indicating that a memory contrast of 1 byte is within the scope of state-of-the-art technology.

Finally, we should emphasize the advantage of EO Q switching over optical pumping [6

T. Tanabe, M. Notomi, H. Taniyama, and E. Kuramochi, Phys. Rev. Lett. 102, 043907 (2009). [CrossRef] [PubMed]

, 9

Q. Xu, P. Dong, and M. Lipson, Nature Phys. 3, 406 (2007). [CrossRef]

, 10

Y. Tanaka, J. Upham, T. Nagashima, T. Sugiya, T. Asano, and S. Noda, Nat. Mater. 6, 862 (2007). [CrossRef] [PubMed]

]. It is difficult to create an ultra-high-Q mode with an optical pumping scheme. This is because the generated carriers induce FCA (which reduces the Q). We need to employ a

p - i - n

junction and reverse biasing to extract the carriers. Then we can switch the cavity to a low-Q mode by forward biasing the

p - i - n

(carrier injection) and switch to an ultra-high-Q mode by reverse biasing (carrier extraction) at an arbitrary timing. Neither the high- nor the low-Q mode is significantly affected by FCA. To demonstrate reverse biasing, we need to improve the operating speed of our

p - i - n

, which is now under investigation.

In summary, we demonstrated and observed AWS by EO modulating a

p - i - n

integrated high-Q Si PhC nanocavity. We also demonstrated EO Q switching as an application of AWS, which is essential if we want to develop photonic memories on Si chips.

Acknowledgments

We thank T. Tamamura, K. Nishiguchi, and D. Takagi for assistance with the fabrication.

References and links

1.	T. Tanabe, M. Notomi, E. Kuramochi, A. Shinya, and H. Taniyama, Nat. Photon. 1, 49 (2007). [CrossRef]
2.	S. Noda, M. Fujita, and T. Asano, Nat. Photon. 1, 449 (2007). [CrossRef]
3.	M. Notomi and S. Mitsugi, Phys. Rev. A 73, 051803(R) (2006). [CrossRef]
4.	S. Preble, Q. Xu, and M. Lipson, Nat. Photon. 1, 293 (2007). [CrossRef]
5.	M. McCutcheon, A. P. Abraham, G. Rieger, and J. Young, Opt. Express 15, 11472 (2007). [CrossRef] [PubMed]
6.	T. Tanabe, M. Notomi, H. Taniyama, and E. Kuramochi, Phys. Rev. Lett. 102, 043907 (2009). [CrossRef] [PubMed]
7.	T. Tanabe, K. Nishiguchi, E. Kuramochi, and M. Notomi, Opt. Express 17, 22505 (2009). [CrossRef]
8.	T. Tanabe, H. Sumikura, H. Taniyama, A. Shinya, and M. Notomi, Appl. Phys. Lett. 96, 101103 (2010). [CrossRef]
9.	Q. Xu, P. Dong, and M. Lipson, Nature Phys. 3, 406 (2007). [CrossRef]
10.	Y. Tanaka, J. Upham, T. Nagashima, T. Sugiya, T. Asano, and S. Noda, Nat. Mater. 6, 862 (2007). [CrossRef] [PubMed]
11.	S. Manipatruni, C. Poitras, Q. Xu, and M. Lipson, Opt. Lett. 33, 1644 (2008). [CrossRef] [PubMed]
12.	E. Kuramochi, M. Notomi, S. Mitsugi, A. Shinya, T. Tanabe, and T. Watanabe, Appl. Phys. Lett. 88, 041112 (2006). [CrossRef]
13.	E. Kuramochi, H. Taniyama, T. Tanabe, A. Shinya, and M. Notomi, Appl. Phys. Lett. 93, 111112 (2008). [CrossRef]
14.	Q. Xu, S. Manipatruni, B. Schmidt, J. Shakya, and M. Lipson, Opt. Express 15, 430 (2007). [CrossRef] [PubMed]
15.	A. Liu, L. Liao, D. Rubin, H. Nguyen, B. Ciftcioglu, Y. Chetrit, N. Izhaky, and M. Paniccia, Opt. Express 15, 660 (2007). [CrossRef] [PubMed]

Fig. 1 (a) Schematic image of a

p - i - n

integrated Si PhC nanocavity. Parameters of the PhC nanocavity are described in [8

T. Tanabe, H. Sumikura, H. Taniyama, A. Shinya, and M. Notomi, Appl. Phys. Lett. 96, 101103 (2010). [CrossRef]

]. (b) Measured transmittance spectrum. (c), (d) The input electrical signal applied to the p and n junctions, respectively. (e) The EO modulated optical signal.

Fig. 2 Spectrograms of the output light from the PhC nanocavity (a) without and (b) with modulation. A forward bias signal [shown in Figs. 1c, 1d] is applied at

t ≃ 300 ps

. (c) Spectrally resolved waveforms obtained by taking line plots along the temporal axes of (a) and (b). The top curve (labeled w/o modulation) indicates

1589.785 nm

in (a); the other curves are taken from (b).

Fig. 3 EO Q switching experiment. Forward bias Fig. 1a is applied at

t ≃ 300 ps

. To exclude the effect of residual background carriers, the black curve (labeled w/o modulation) is measured by modulating the cavity using a timing far from the recording window.

OCIS Codes
(190.4390) Nonlinear optics : Nonlinear optics, integrated optics
(230.0250) Optical devices : Optoelectronics
(230.5750) Optical devices : Resonators
(350.4238) Other areas of optics : Nanophotonics and photonic crystals
(230.5298) Optical devices : Photonic crystals
(250.4390) Optoelectronics : Nonlinear optics, integrated optics

ToC Category:
Optical Devices

History
Original Manuscript: July 16, 2010
Revised Manuscript: September 1, 2010
Manuscript Accepted: October 19, 2010
Published: November 18, 2010

Virtual Issues
January 14, 2011 Spotlight on Optics

Citation
Takasumi Tanabe, Eiichi Kuramochi, Hideaki Taniyama, and Masaya Notomi, "Electro-optic adiabatic wavelength shifting and Q switching demonstrated using a p-i-n integrated photonic crystal nanocavity," Opt. Lett. 35, 3895-3897 (2010)
http://www.opticsinfobase.org/ol/abstract.cfm?URI=ol-35-23-3895

Sort: Author | Year | Journal | Reset

References

T. Tanabe, M. Notomi, E. Kuramochi, A. Shinya, and H. Taniyama, Nat. Photon. 1, 49 (2007). [CrossRef]
S. Noda, M. Fujita, and T. Asano, Nat. Photon. 1, 449 (2007). [CrossRef]
M. Notomi and S. Mitsugi, Phys. Rev. A 73, 051803(R) (2006). [CrossRef]
S. Preble, Q. Xu, and M. Lipson, Nat. Photon. 1, 293 (2007). [CrossRef]
M. McCutcheon, A. P. Abraham, G. Rieger, and J. Young, Opt. Express 15, 11472 (2007). [CrossRef] [PubMed]
T. Tanabe, M. Notomi, H. Taniyama, and E. Kuramochi, Phys. Rev. Lett. 102, 043907 (2009). [CrossRef] [PubMed]
T. Tanabe, K. Nishiguchi, E. Kuramochi, and M. Notomi, Opt. Express 17, 22505 (2009). [CrossRef]
T. Tanabe, H. Sumikura, H. Taniyama, A. Shinya, and M. Notomi, Appl. Phys. Lett. 96, 101103 (2010). [CrossRef]
Q. Xu, P. Dong, and M. Lipson, Nature Phys. 3, 406 (2007). [CrossRef]
Y. Tanaka, J. Upham, T. Nagashima, T. Sugiya, T. Asano, and S. Noda, Nat. Mater. 6, 862 (2007). [CrossRef] [PubMed]
S. Manipatruni, C. Poitras, Q. Xu, and M. Lipson, Opt. Lett. 33, 1644 (2008). [CrossRef] [PubMed]
E. Kuramochi, M. Notomi, S. Mitsugi, A. Shinya, T. Tanabe, and T. Watanabe, Appl. Phys. Lett. 88, 041112 (2006). [CrossRef]
E. Kuramochi, H. Taniyama, T. Tanabe, A. Shinya, and M. Notomi, Appl. Phys. Lett. 93, 111112 (2008). [CrossRef]
Q. Xu, S. Manipatruni, B. Schmidt, J. Shakya, and M. Lipson, Opt. Express 15, 430 (2007). [CrossRef] [PubMed]
A. Liu, L. Liao, D. Rubin, H. Nguyen, B. Ciftcioglu, Y. Chetrit, N. Izhaky, and M. Paniccia, Opt. Express 15, 660 (2007). [CrossRef] [PubMed]

Cited By

Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.

Click here to see a list of articles that cite this paper