Multilayer aberration correction for depth-independent three-dimensional crystal growth in glass by femtosecond laser heating

• Abstract
• 

• JOSA B, Vol. 30, Issue 5, pp. 1234-1240 (May 2013)
• Adam Stone, Himanshu Jain, Volkmar Dierolf, Masaaki Sakakura, Yasuhiko Shimotsuma, Kiyotaka Miura, Kazuyuki Hirao

Horizontally progressive mirror for blind spot detection in automobiles

• Abstract
• 

• Optics Letters, Vol. 38, Issue 3, pp. 317-319 (February 2013)
• Hocheol Lee, Dohyun Kim, Sung Yi

Rapid fabrication of miniature lens arrays by four-axis single point diamond machining

• Abstract
• 

• Optics Express, Vol. 21, Issue 3, pp. 3557-3572 (February 2013)
• Brian McCall, Tomasz S. Tkaczyk

Direct laser writing of three-dimensional narrow bandgap and high refractive-index PbSe structures in a solution

• Abstract
• 

• Optics Express, Vol. 21, Issue 9, pp. 11202-11208 (May 2013)
• Zongsong Gan, Yaoyu Cao, Min Gu

Laser operation of a Tm:Y₂O₃ planar waveguide

• Abstract
• 

• Optics Express, Vol. 21, Issue 10, pp. 12460-12468 (May 2013)
• Jakub W. Szela, Katherine A. Sloyan, Tina L. Parsonage, Jacob I. Mackenzie, Robert W. Eason

Free-form optics for Fresnel-lens-based photovoltaic concentrators

• Abstract
• 

• Optics Express, Vol. 21, Issue 103, pp. A494-A502 (May 2013)
• Juan C. Miñano, Pablo Benítez, Pablo Zamora, Marina Buljan, Rubén Mohedano, Asunción Santamaría

Research on compensation of suction deformation error of potassium dihydrogen phosphate crystal

• Abstract

• Applied Optics, Vol. 52, Issue 2, pp. 110-116 (January 2013)
• Guipeng Tie, Yifan Dai, Chaoliang Guan, Dengchao Zhu, Bing Song

Construction of rugged, ultrastable optical assemblies with optical component alignment at the few microradian level

• Abstract

• Applied Optics, Vol. 52, Issue 2, pp. 177-181 (January 2013)
• Christian J. Killow, Ewan D. Fitzsimons, James Hough, Michael Perreur-Lloyd, David I. Robertson, Sheila Rowan, Henry Ward

Deterministic ion beam material adding technology for high-precision optical surfaces

• Abstract

• Applied Optics, Vol. 52, Issue 6, pp. 1302-1309 (February 2013)
• Wenlin Liao, Yifan Dai, Xuhui Xie, Lin Zhou

High-temperature sensor based on an abrupt-taper Michelson interferometer in single-mode fiber

• Abstract

• Applied Optics, Vol. 52, Issue 10, pp. 2038-2041 (April 2013)
• Le Xu, Lan Jiang, Sumei Wang, Benye Li, Yongfeng Lu

Precision absolute positional measurement of laser beams

• Abstract
• 

• Applied Optics, Vol. 52, Issue 12, pp. 2527-2530 (April 2013)
• Ewan D. Fitzsimons, Johanna Bogenstahl, James Hough, Christian J. Killow, Michael Perreur-Lloyd, David I. Robertson, Henry Ward

Peano-like paths for subaperture polishing of optical aspherical surfaces

• Abstract

• Applied Optics, Vol. 52, Issue 15, pp. 3624-3636 (May 2013)
• Hon-Yuen Tam, Haobo Cheng, Zhichao Dong

Developing and fabricating optical systems for a prospective remote-earth-probe spacecraft

• Abstract

• Journal of Optical Technology, Vol. 80, Issue 1, pp. 25-27 (January 2013)
• S. A. Arkhipov, B. N. Senik, V. I. Zavarzin

Processing heat-shrink materials with laser radiation in operations involving the assembly of optical elements

• Abstract

• Journal of Optical Technology, Vol. 80, Issue 2, pp. 101-103 (February 2013)
• E. V. Dorofeeva, P. Yu. Lobanov, I. S. Manuĭlovich, O. E. Sidoryuk

Stability of high-power laser mirrors against the thermal action of the coolant

• Abstract

• Journal of Optical Technology, Vol. 80, Issue 2, pp. 96-100 (February 2013)
• P. A. Drozdov, Ya. I. Malashko, M. B. Naumov, S. I. Prytkov

Technological features of the fabrication of the primary mirrors of telescopes

• Abstract

• Journal of Optical Technology, Vol. 80, Issue 4, pp. 207-213 (April 2013)
• A. P. Semenov, M. A. Abdulkadyrov, S. P. Belousov, A. P. Patrikeev, V. E. Patrikeev, Y. A. Sharov

Fabricating the optical elements of compound mirrors for large astronomical telescopes

• Abstract

• Journal of Optical Technology, Vol. 80, Issue 4, pp. 214-218 (April 2013)
• M. A. Abdulkadyrov, S. P. Belousov, A. P. Patrikeev, V. E. Patrikeev, A. P. Semenov

Optimizing the shaping technology and test methods for convex aspheric surfaces of large optical items

• Abstract

• Journal of Optical Technology, Vol. 80, Issue 4, pp. 219-225 (April 2013)
• M. A. Abdulkadyrov, S. P. Belousov, V. V. Pridnya, A. V. Polyanchikov, A. P. Semenov

Interference methods of testing the surface figure of large aspheric items, based on lens-type and holographic wave-front correctors

• Abstract

• Journal of Optical Technology, Vol. 80, Issue 4, pp. 226-229 (April 2013)
• A. P. Semenov, M. A. Abdulkadyrov, V. E. Patrikeev, A. S. Vorobyov, J. A. Sharov

Micron-scale copper wires printed using femtosecond laser-induced forward transfer with automated donor replenishment

• Abstract
• 

• Optical Materials Express, Vol. 3, Issue 6, pp. 747-754 (June 2013)
• James A. Grant-Jacob, Benjamin Mills, Matthias Feinaeugle, Collin L. Sones, Gerrit Oosterhuis, Marc B. Hoppenbrouwers, Robert W. Eason