OSA's Digital Library

Spotlight on Optics

Spotlight on Optics

| HIGHLIGHTED ARTICLES FROM OSA JOURNALS

  • June 2011

Optics InfoBase > Spotlight on Optics > Schwarzschild spectrometer


Schwarzschild spectrometer

Published in Applied Optics, Vol. 50 Issue 16, pp.2418-2424 (2011)
by M. Dolores Mouriz, Elena López Lago, Xesús Prieto-Blanco, Héctor González-Núñez, and Raúl de la Fuente

Source article Abstract | Full Text: XHTML | Full Text: PDF


Spotlight summary: In this work, the authors add a new design form, with a novel combination of properties, to those available to designers of imaging spectrometers. The Schwarzschild design employed here corrects astigmatism, a property required for imaging spectrometers in particular and notably does so with a planar diffraction grating rather than the curved grating required for an Offner spectrometer.


Imaging spectrometers, also referred to in some contexts as hyperspectral imagers, have found a wide range of applications, from the laboratory to industrial process control and to remote sensing and astronomy. Such instruments may be thought of either as extending the capabilities of two-dimensional imaging by adding a third—spectral—dimension or as extending spectroscopy by collecting spectra from a large number of points arranged in a spatial context. Dispersive spectrometers, which use either a prism or a grating to divert light as a function of wavelength, are a popular design basis for imaging spectrometers. In typical modern embodiments, light enters the spectrometer through a slit, after which it is collimated by an optical system before encountering a prism or grating and another optical system (or in some forms the same element used to collimate) that forms a spectrally dispersed image of the slit on a two-dimensional detector array. Thus one dimension on the detector array (perpendicular to the entrance slit) corresponds to wavelength while the other corresponds to spatial position along the slit. Front optics are often used to image the object of interest onto the slit and some mechanism or motion is then used to build up the second spatial dimension of the data set by acquiring successive exposures as the slit is scanned across the object (or vice versa). In the field of remote sensing such a device is often referred to as a “pushbroom” imaging spectrometer, with the scan motion typically provided by the platform (aircraft or spacecraft) carrying the instrument.


Imaging spectroscopy places additional demands on the design of the optics beyond the requirements of a nonimaging spectrometer, since the image quality in the direction parallel to the slit is now an important factor, a challenge that the authors address in a novel approach, adopting Schwarzschild optical systems to obtain designs that are anastigmatic at the center of the slit and for a particular wavelength. The significance of the work is admirably placed in context by the authors in their discussion of how one would modify each of four other design systems—a Czerny–Turner spectrometer, an Ebert–Fastie spectrometer, an Offner spectrometer, and a Schwarzschild imager—to obtain their Schwarzschild spectrometer. The Offner in particular is a powerful design for imaging spectrometers, one from which the authors’ approach differs by the replacement of the Offner’s convex grating by a planar grating and a convex mirror. A cited advantage of using a planar rather than convex grating is flexibility, in that the spectral range may now be tuned (shifted) by rotation of the grating. Another significant distinction is that manufacture of high-efficiency gratings on curved surfaces is currently an expensive process, perhaps making the Schwarzschild design a particularly attractive option for low-cost or high-production applications.


-- Glenn R. Sellar



Technical Division: Optical Design and Instrumentation
ToC Category: Instrumentation, Measurement, and Metrology
OCIS Codes: (120.4570) Instrumentation, measurement, and metrology : Optical design of instruments
(120.6200) Instrumentation, measurement, and metrology : Spectrometers and spectroscopic instrumentation
(220.1000) Optical design and fabrication : Aberration compensation
(300.6190) Spectroscopy : Spectrometers


Posted on June 03, 2011

Add Comment
You must log in to add comments.





Browse Journals / Lookup Meetings

Browse by Journal and Year


   


Lookup Conference Papers

Close Browse Journals / Lookup Meetings

Previous Spotlights

2014

2013

2012

2011

2010

2009