OSA's Digital Library

Virtual Journal for Biomedical Optics

Virtual Journal for Biomedical Optics

| EXPLORING THE INTERFACE OF LIGHT AND BIOMEDICINE

  • Editor: Gregory W. Faris
  • Vol. 2, Iss. 3 — Mar. 7, 2007

Side-polished multimode fiber biosensor based on surface plasmon resonance with halogen light

Hong-Yu Lin, Woo-Hu Tsai, Yu-Chia Tsao, and Bor-Chiou Sheu  »View Author Affiliations


Applied Optics, Vol. 46, Issue 5, pp. 800-806 (2007)
http://dx.doi.org/10.1364/AO.46.000800


View Full Text Article

Enhanced HTML    Acrobat PDF (1626 KB)





Browse Journals / Lookup Meetings

Browse by Journal and Year


   


Lookup Conference Papers

Close Browse Journals / Lookup Meetings

Article Tools

Share
Citations

Abstract

A side-polished multimode fiber sensor based on surface plasmon resonance (SPR) as the transducing element with a halogen light source is proposed. The SPR fiber sensor is side polished until half the core is closed and coated with a 37 nm gold thin film by dc sputtering. The SPR curve on the optical spectrum is described by an optical spectrum analyzer and can sense a range of widths in wavelengths of SPR effects. The measurement system using the halogen light source is constructed for several real-time detections that are carried out for the measurement of the index liquid detections for the sensitivity analysis. The sensing fiber is demonstrated with a series of refractive index (RI) liquids and set for several experiments, including the stability, repeatability, and resolution calibration. The results for the halogen light source with the resolution of the measurement based on wavelength interrogation were 3 × 10 6 refractive index units (RIUs). The SPR dip shifted in wavelength is used as a measure of the RI change at a surface, and this RI change varies directly with the number of biomolecules at the surface. The SPR dip shift in wavelength, which was hybridized at 0.1 μ M of the target DNA to the probe DNA, was 8.66   nm . The all-fiber multimode SPR sensor, which has the advantages of being low cost, being disposable, having high stability and linearity, being free of labeling, and having potential for real-time detection, permit the sensor and system to be used in biochemical sensing and environmental monitoring.

© 2007 Optical Society of America

OCIS Codes
(060.2370) Fiber optics and optical communications : Fiber optics sensors
(170.0170) Medical optics and biotechnology : Medical optics and biotechnology
(240.6680) Optics at surfaces : Surface plasmons

ToC Category:
Fiber Optics and Optical Communications

History
Original Manuscript: March 16, 2006
Revised Manuscript: May 25, 2006
Manuscript Accepted: October 2, 2006
Published: January 25, 2007

Virtual Issues
Vol. 2, Iss. 3 Virtual Journal for Biomedical Optics

Citation
Hong-Yu Lin, Woo-Hu Tsai, Yu-Chia Tsao, and Bor-Chiou Sheu, "Side-polished multimode fiber biosensor based on surface plasmon resonance with halogen light," Appl. Opt. 46, 800-806 (2007)
http://www.opticsinfobase.org/vjbo/abstract.cfm?URI=ao-46-5-800


Sort:  Author  |  Year  |  Journal  |  Reset  

References

  1. E. Kretchmann and H. Reather, "Radiative decay of non-radiative surface plasmons excited by light," Naturforscher 23, 2135-2136 (1968).
  2. A. Otto, "Exitation of nonradiative surface plasma waves in silver by the method of frustrated total reflection," Z. Phys. 216, 398-410 (1968). [CrossRef]
  3. E. Kretchmann, "Die Bestimmung optischer Konstanten von Metallen durch Anregung von Oberflachenplasmashwingungen," Z. Phys. 241, 313-324 (1971). [CrossRef]
  4. W. P. Chen and J. M. Chen, "Use of surface plasma waves for determination of the thickness and optical constants of thin metallic films," J. Opt. Soc. Am. A 71, 189-191 (1981). [CrossRef]
  5. E. Fontana, "Analysis of optical surfaces by means of surface plasmon spectroscopy," IEEE Trans. Instrum. Meas. 45, 399-405 (1996). [CrossRef]
  6. M. T. Flanagan and R. H. Pantell, "Surface plasmon resonance and immunosensors," Electron. Lett. 20, 968-970 (1984). [CrossRef]
  7. C. Nylander, B. Liedberg, and T. Lind, "Gas detection by means of surface plasmons resonance," Sens. Actuators 3, 79-88 (1982). [CrossRef]
  8. B. Liedberg, C. Nylander, and I. Lundström, "Surface plasmon resonance for gas detection and biosensing," Sens. Actuators 4, 299-304 (1983). [CrossRef]
  9. B. Liedberg, C. Nylander, and I. Lundström, "Biosensing with surface plasmon resonance--how it all started," Biosens. Bioelectron. 10, 1-9 (1995). [CrossRef]
  10. R. J. Green, R. A. Frazier, K. M. Shakesheff, M. C. Davies, C. J. Roberts, and S. J. B. Tendler, "Surface plasmon resonance analysis of dynamic biological interactions with biomaterials," Biomaterials 21, 1823-1835 (2000). [CrossRef] [PubMed]
  11. H.-M. Haake, A. Schütz, and G. Gauglitz, "Label-free detection of biomolecular interaction by optical sensors," Fresenius' J. Anal. Chem. 366, 576-585 (2000). [CrossRef]
  12. K. Matsubara, S. Kawata, and S. Minami, "Optical chemical sensor based on surface plasmon measurement," Appl. Opt. 27, 1160-1163 (1988). [CrossRef] [PubMed]
  13. M. G. Moharam and T. K. Gaylord, "Rigorous coupled-wave analysis of metallic surface-relief gratings," J. Opt. Soc. Am. A 3, 1780-1787 (1986). [CrossRef]
  14. R. C. Jorgenson and S. S. Yee, "A fiber-optic chemical sensor based on surface plasmon resonance," Sens. Actuators B 12, 213-220 (1993). [CrossRef]
  15. R. C. Jorgenson and S. S. Yee, "Control of the dynamics range and sensitivity of a surface-plasmon resonance based fiber optics sensor," Sens. Actuators B 43, 44-48 (1994). [CrossRef]
  16. C. C. Jung, S. B. Saban, S. S. Yee, and R. B. Darling, "Chemical electrode surface plasmon resonance sensor," Sens Actuators B 32, 143-147 (1996). [CrossRef]
  17. S. Markatos, M. N. Zervas, and I. P. Giles, "Optical fiber surface-plasmon wave device," Electron. Lett. 24, 287-288 (1988). [CrossRef]
  18. N. Zervas and I. P. Giles, "Performance of surface-plasma-wave fiber-optic polarizers," Opt. Lett. 15, 513-515 (1990). [CrossRef] [PubMed]
  19. R. Willsch, "High performance metal-clad fibre-optic polarisers," Electron. Lett. 26, 1113-1115 (1990). [CrossRef]
  20. J. Homola, "Optical fiber sensor based on surface plasmon excitation, Second European Conference on Optical Chemical Sensors and Biosensors," Sens. Actuators B 29, 401-405 (1995). [CrossRef]
  21. J. Homola, R. Slavi'k, and J. Ctyroký, "Interaction between fiber modes and surface plasmon waves: spectral properties," Opt. Lett. 22, 1403-1405 (1997). [CrossRef]
  22. R. Slavi'k, J. Homola, and J. Ctyroký, "Novel surface plasmon resonance sensor based on single-mode optical fiber," in Chemical, Biochemical, and Environmental Fiber Sensors IX, Proc. SPIE 3105, 325-331 (1997). [CrossRef]
  23. R. Slavi'k, J. Homola, J. Ctyroký, and E. Brynda, "Novel spectral fiber optic sensor based on surface plasmon resonance," Sens. Actuators B 74, 106-111 (2001). [CrossRef]
  24. R. Slavi'k, J. Homola, and E. Brynda, "A miniature fiber optic surface plasmon resonance sensor for fast detection of staphylococcal enterotoxin B," Biosens. Bioelectron. 17, 591-595 (2002). [CrossRef]
  25. A. J. C. Tubb, F. P. Payne, R. B. Millington, and C. R. Lowe, "Single-mode optical fiber surface plasma wave chemical sensor," Sens. Actuators B 41, 71-79 (1997). [CrossRef]
  26. I. Garce, C. Aldea, and J. Mateo, "4-layer chemical fiber optics plasmon-based sensor," Sens. Actuators B 7, 771-774 (1993). [CrossRef]
  27. L. A. Obando and K. S. Booksh, "Tuning dynamic range and sensitivity of white-light, multimode, fiber-optic surface plasmon resonance sensors," Anal. Chem. 71, 5116-5122 (1999). [CrossRef]

Cited By

Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.


« Previous Article

OSA is a member of CrossRef.

CrossCheck Deposited