OSA's Digital Library

Virtual Journal for Biomedical Optics

Virtual Journal for Biomedical Optics

| EXPLORING THE INTERFACE OF LIGHT AND BIOMEDICINE

  • Editor: Gregory W. Faris
  • Vol. 4, Iss. 2 — Feb. 10, 2009

Large enhancement of femtosecond laser micromachining speed in dye-doped hydrogel polymers

Li Ding, Dharmendra Jani, Jeffrey Linhardt, Jay F. Künzler, Siddhesh Pawar, Glen Labenski, Thomas Smith, and Wayne H. Knox  »View Author Affiliations


Optics Express, Vol. 16, Issue 26, pp. 21914-21921 (2008)
http://dx.doi.org/10.1364/OE.16.021914


View Full Text Article

Enhanced HTML    Acrobat PDF (780 KB) Open Access





Browse Journals / Lookup Meetings

Browse by Journal and Year


   


Lookup Conference Papers

Close Browse Journals / Lookup Meetings

Article Tools

Share
Citations

Abstract

Ophthalmologic hydrogel polymers are doped with Fluorescein or Coumarin dyes prior to the femtosecond laser micromachining process. We find that the achievable micromachining writing speed can be greatly increased while maintaining large refractive index changes (up to +0.08). Compared with previous results in dye-doped polymers that do not contain water such as PMMA, we obtain much larger index changes and much faster writing speeds.

© 2008 Optical Society of America

OCIS Codes
(140.3390) Lasers and laser optics : Laser materials processing
(160.5470) Materials : Polymers
(320.7110) Ultrafast optics : Ultrafast nonlinear optics

ToC Category:
Laser Micromachining

History
Original Manuscript: November 7, 2008
Revised Manuscript: December 14, 2008
Manuscript Accepted: December 15, 2008
Published: December 17, 2008

Virtual Issues
Vol. 4, Iss. 2 Virtual Journal for Biomedical Optics

Citation
Li Ding, Dharmendra Jani, Jeffrey Linhardt, Jay F. Künzler, Siddhesh Pawar, Glen Labenski, Thomas Smith, and Wayne H. Knox, "Large enhancement of femtosecond laser micromachining speed in dye-doped hydrogel polymers," Opt. Express 16, 21914-21921 (2008)
http://www.opticsinfobase.org/vjbo/abstract.cfm?URI=oe-16-26-21914


Sort:  Author  |  Year  |  Journal  |  Reset  

References

  1. K. M. Davis, K. Miura, N. Sugimoto, and K. Hirao, "Writing waveguides in glass with a femtosecond laser," Opt. Lett. 21, 1729-1731 (1996). [CrossRef] [PubMed]
  2. A. Marcinkevicius, S. Juodkazis, W. Watanabe, M. Miwa, S. Matsuo, H. Misawa, and J. Nishii, "Femtosecond laser-assisted three-dimensional microfabrication in silica," Opt. Lett. 26, 277-279 (2001). [CrossRef]
  3. Y. Nasu, M. Kohtoku, and Y. Hibino, "Low-loss waveguides written with a femtosecond laser for flexible interconnection in a planar light-wave circuit," Opt. Lett. 30, 723-725 (2005). [CrossRef] [PubMed]
  4. T. N. Kim, K. Campbell, A. Groisman, D. Kleinfeld, and C. B. Schaffer, "Femtosecond laser-drilled capillary integrated into a microfluidic device," Appl. Phys. Lett. 86, 201106 (2005). [CrossRef]
  5. E. N. Glezer, M. Milosavljevic, L. Huang, R. J. Finlay, T. H. Her, J. P. Callan, and E. Mazur, "Three-dimensional optical storage inside transparent materials," Opt. Lett. 21, 2023-2025 (1996). [CrossRef] [PubMed]
  6. B. H. Cumpston, S. P. Ananthavel, S. Barlow, D. L. Dyer, J. E. Ehrlich, L. L. Erskine, A. A. Heikal, S. M. Kuebler, I. Y. S. Lee, D. McCord-Maughon, J. Q. Qin, H. Rockel, M. Rumi, X. L. Wu, S. R. Marder, and J. W. Perry, "Two-photon polymerization initiators for three-dimensional optical data storage and microfabrication," Nature 398, 51-54 (1999). [CrossRef]
  7. J. H. Si, J. R. Qiu, J. F. Zhai, Y. Q. Shen, and K. Hirao, "Photoinduced permanent gratings inside bulk azodye-doped polymers by the coherent field of a femtosecond laser," Appl. Phys. Lett. 80, 359-361 (2002). [CrossRef]
  8. L. Ding, R. Blackwell, J. F. Künzler, and W. H. Knox, "Large refractive index change in silicone-based and non-silicone-based hydrogel polymers induced by femtosecond laser micro-machining," Opt. Express 14, 11901-11909 (2006), http://www.opticsinfobase.org/abstract.cfm?URI=oe-14-24-11901. [CrossRef] [PubMed]
  9. A. Zoubir, C. Lopez, M. Richardson, and K. Richardson, "Femtosecond laser fabrication of tubular waveguides in poly(methyl methacrylate)," Opt. Lett. 29, 1840-1842 (2004). [CrossRef] [PubMed]
  10. S. Sowa, W. Watanabe, T. Tamaki, J. Nishii, and K. Itoh, "Symmetric waveguides in poly(methyl methacrylate) fabricated by femtosecond laser pulses," Opt. Express 14, 291-297 (2006), http://www.opticsinfobase.org/abstract.cfm?URI=oe-14-1-291. [CrossRef] [PubMed]
  11. C. R. Mendonca, L. R. Cerami, T. Shih, R. W. Tilghman, T. Baldacchini, and E. Mazur, "Femtosecond laser waveguide micromachining of PMMA films with azoaromatic chromophores," Opt. Express 16, 200-206 (2008), http://www.opticsinfobase.org/abstract.cfm?URI=oe-16-1-200. [CrossRef] [PubMed]
  12. L. Ding, R. I. Blackwell, J. F. Kunzler, and W. H. Knox, "Femtosecond laser micromachining of waveguides in silicone-based hydrogel polymers," Appl. Opt. 47, 3100-3108 (2008). [CrossRef] [PubMed]
  13. M. Straub, and M. Gu, "Near-infrared photonic crystals with higher-order bandgaps generated by two-photon photopolymerization," Opt. Lett. 27, 1824-1826 (2002). [CrossRef]
  14. G. Zhou, M. J. Ventura, M. R. Vanner, and M. Gu, "Use of ultrafast-laser-driven microexplosion for fabricating three-dimensional void-based diamond-lattice photonic crystals in a solid polymer material," Opt. Lett. 29, 2240-2242 (2004). [CrossRef] [PubMed]
  15. P. Yao, G. J. Schneider, D. W. Prather, E. D. Wetzel, and D. J. O'Brien, "Fabrication of three-dimensional photonic crystals with multilayer photolithography," Opt. Express 13, 2370-2376 (2005), http://www.opticsexpress.org/abstract.cfm?URI=OPEX-13-7-2370. [CrossRef] [PubMed]
  16. N. Tetreault, G. von Freymann, M. Deubel, M. Hermatschweiler, F. Perez-Willard, S. John, M. Wegener, and G. A. Ozin, "New route to three-dimensional photonic bandgap materials: Silicon double inversion of polymer templates," Adv. Mater. 18, 457-460 (2006). [CrossRef]
  17. W. Haske, V. W. Chen, J. M. Hales, W. T. Dong, S. Barlow, S. R. Marder, and J. W. Perry, "65 nm feature sizes using visible wavelength 3-D multiphoton lithography," Opt. Express 15, 3426-3436 (2007), http://www.opticsexpress.org/abstract.cfm?URI=OPEX-15-6-3426. [CrossRef] [PubMed]
  18. D. Day, and M. Gu, "Microchannel fabrication in PMMA based on localized heating by nanojoule high repetition rate femtosecond pulses," Opt. Express 13, 5939-5946 (2005), http://www.opticsexpress.org/abstract.cfm?URI=OPEX-13-16-5939. [CrossRef] [PubMed]
  19. J. Serbin, A. Egbert, A. Ostendorf, B. N. Chichkov, R. Houbertz, G. Domann, J. Schulz, C. Cronauer, L. Frohlich, and M. Popall, "Femtosecond laser-induced two-photon polymerization of inorganic-organic hybrid materials for applications in photonics," Opt. Lett. 28, 301-303 (2003). [CrossRef] [PubMed]
  20. S. Katayama, M. Horiike, K. Hirao, and N. Tsutsumi, "Structures induced by irradiation of femto-second laser pulse in polymeric materials," J. Polym. Sci. Polym. Phys. 40, 537-544 (2002). [CrossRef]
  21. S. Katayama, M. Horiike, K. Hirao, and N. Tsutsumi, "Structure induced by irradiation of femtosecond laser pulse in dyed polymeric materials," J. Polym. Sci. Polym. Phys. 40, 2800-2806 (2002). [CrossRef]
  22. D. A. Higgins, T. A. Everett, A. F. Xie, S. M. Forman, and T. Ito, "High-resolution direct-write multiphoton photolithography in poly(methylmethacrylate) films," Appl. Phys. Lett. 88, 184101 (2006). [CrossRef]
  23. X. P. Li, J. W. M. Chon, S. H. Wu, R. A. Evans, and M. Gu, "Rewritable polarization-encoded multilayer data storage in 2,5-dimethyl-4-(p-nitrophenylazo)anisole doped polymer," Opt. Lett. 32, 277-279 (2007). [CrossRef] [PubMed]
  24. A. Baum, P. J. Scully, M. Basanta, C. L. P. Thomas, P. R. Fielden, N. J. Goddard, W. Perrie, and P. R. Chalker, "Photochemistry of refractive index structures in poly(methyl methacrylate) by femtosecond laser irradiation," Opt. Lett. 32, 190-192 (2007). [CrossRef]
  25. Y. P. Meshalkin, V. A. Svetlichnyi, A. V. Reznichenko, A. Y. Myachin, S. S. Bakhareva, S. M. Dolotov, T. N. Kopylova, and E. P. Ponomarenko, "Two-photon excitation of dyes in a polymer matrix by femtosecond pulses from a Ti:sapphire laser," Quantum Electron. 33, 803-806 (2003). [CrossRef]
  26. C. C. S. Karlgard, D. K. Sarkar, L. W. Jones, C. Moresoli, and K. T. Leung, "Drying methods for XPS analysis of PureVisionTM, Focus® Night and DayTM and conventional hydrogel contact lens," Appl. Surf. Sci. 230, 106-114 (2004). [CrossRef]
  27. C. Xu and W. W. Webb, "Measurement of two-photon excitation cross sections of molecular fluorophores with data from 690 to 1050 nm," J. Opt. Soc. Am. B 13, 481-491 (1996). [CrossRef]
  28. N. S. Makarov, M. Drobizhev, and A. Rebane, "Two-photon absorption standards in the 550-1600 nm excitation wavelength range," Opt. Express 16, 4029-4047 (2008). [CrossRef] [PubMed]
  29. L. Ding, L. G. Cancado, L. Novotny, W. H. Knox, N. Anderson, D. Jani, R. I. Blackwell, and J. F. Kunzler, "Micro-Raman spectroscopy of refractive index microstructures in silicone-based hydrogel polymers created by high-repetition-rate femtosecond laser micromachining," Submitted to J. Opt. Soc. Am. B, (2008).
  30. D. N. Nikogosyan, "Multi-photon high-excitation-energy approach to fibre grating inscription," Meas. Sci. Technol. 18, R1-R29 (2007). [CrossRef]

Cited By

Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.


« Previous Article  |  Next Article »

OSA is a member of CrossRef.

CrossCheck Deposited