OSA's Digital Library

Virtual Journal for Biomedical Optics

Virtual Journal for Biomedical Optics

| EXPLORING THE INTERFACE OF LIGHT AND BIOMEDICINE

  • Editors: Andrew Dunn and Anthony Durkin
  • Vol. 8, Iss. 1 — Feb. 4, 2013

Multi-view display module employing MEMS projector array

Yasuhiro Takaki, Hiromitsu Takenaka, Yasuhiro Morimoto, Osamu Konuma, and Kenji Hirabayashi  »View Author Affiliations


Optics Express, Vol. 20, Issue 27, pp. 28257-28266 (2012)
http://dx.doi.org/10.1364/OE.20.028257


View Full Text Article

Enhanced HTML    Acrobat PDF (5314 KB) Open Access





Browse Journals / Lookup Meetings

Browse by Journal and Year


   


Lookup Conference Papers

Close Browse Journals / Lookup Meetings

Article Tools

Share
Citations

Abstract

A frameless multi-view display module that consists of an array of microelectromechanical system (MEMS) based projectors, a sparse lenticular lens, and a vertical diffuser is proposed to provide a large-screen autostereoscopic display. The projectors are positioned in a horizontal vector form or in a matrix form in front of the transfer screen in order to produce the same number of three-dimensional (3D) pixels in each cylindrical lens constituting the lenticular lens to increase the horizontal resolution of the module. The projectors generate a slanted two-dimensional array of dots on the vertical diffuser to provide a large number of viewpoints. The experimental display system was constructed using four projectors. The system had a 3D resolution of 160 × 120, and it provided 64 views. The screen size was 14.4 in.

© 2012 OSA

OCIS Codes
(110.0110) Imaging systems : Imaging systems
(120.2040) Instrumentation, measurement, and metrology : Displays
(330.1400) Vision, color, and visual optics : Vision - binocular and stereopsis

ToC Category:
Imaging Systems

History
Original Manuscript: October 17, 2012
Revised Manuscript: November 23, 2012
Manuscript Accepted: November 25, 2012
Published: December 5, 2012

Virtual Issues
Vol. 8, Iss. 1 Virtual Journal for Biomedical Optics

Citation
Yasuhiro Takaki, Hiromitsu Takenaka, Yasuhiro Morimoto, Osamu Konuma, and Kenji Hirabayashi, "Multi-view display module employing MEMS projector array," Opt. Express 20, 28257-28266 (2012)
http://www.opticsinfobase.org/vjbo/abstract.cfm?URI=oe-20-27-28257


Sort:  Author  |  Year  |  Journal  |  Reset  

References

  1. T. Okoshi, Three-Dimensional Imaging Techniques (Academic Press, New York, 1976).
  2. T. Okoshi, “Three-dimensional displays,” Proc. IEEE68(5), 548–564 (1980). [CrossRef]
  3. N. A. Dodgson, “Autostereoscopic 3D displays,” Computer38(8), 31–36 (2005). [CrossRef]
  4. J.-Y. Son and B. Javidi, “Three-dimensional imaging methods based on multiview images,” J. Disp. Technol.1(1), 125–140 (2005). [CrossRef]
  5. N. S. Holliman, N. A. Dodgson, G. E. Favalora, and L. Pockett, “Three-dimensional displays: a review and applications analysis,” IEEE Trans. Broadcast57(2), 362–371 (2011). [CrossRef]
  6. H. Urey, K. Chellappan, E. Erden, and P. Surman, “State of the art in stereoscopic and autostereoscopic displays,” Proc. IEEE99(4), 540–555 (2011). [CrossRef]
  7. T. Okoshi, A. Yano, and Y. Fukumori, “Curved triple-mirror screen for projection-type three-dimensional display,” Appl. Opt.10(3), 482–489 (1971). [CrossRef] [PubMed]
  8. Y. Takaki, “A novel 3D display using an array of LCD panels,” Proc. SPIE5003, 1–8 (2003). [CrossRef]
  9. W. Matusik and H. Pfister, “3D TV: A scalable system for real-time acquisition, transmission, and autostereoscopic display of dynamic scenes,” AMC Trans. Graph.23, 814–824 (2004). [CrossRef]
  10. T. Balogh, “The HoloVizio system,” Proc. SPIE6055, 60550U (2006).
  11. S. Iwasawa, M. Kawakita, S. Yano, and H. Ando, “Implementation of autostereoscopic HD projection display with dense horizontal parallax,” Proc. SPIE7863, 78630T (2011).
  12. W.-L. Chen, C.-H. Tsai, C.-S. Wu, C.-Y. Chen, and S.-C. Cheng, “A high-resolution autostereoscopic display system with a wide viewing angle using an LCOS projector array,” J. Soc. Inf. Disp.18(9), 647–653 (2010). [CrossRef]
  13. W.-L. Chen, H.-H. Huang, T. H. Hsu, M.-H. Kuo, and C.-H. Tsai, “Optical simulation for cross-talk evaluation and improvement of autostereoscopic 3-D displays with a projector array,” J. Soc. Inf. Disp.18(9), 662–667 (2010). [CrossRef]
  14. H. Urey and M. Sayinta, “An apparatus for displaying 3D images,” PCT WO2009/136218 A1.
  15. M. Freeman, M. Champion, and S. Madhaven, “Scanned laser pico-projectors: seeing the big picture (with a small device),” Opt. Photon. News20(5), 28–34 (2009). [CrossRef]
  16. M. Yamasaki, H. Sakai, K. Utsugi, and T. Koike, “High-density light field reproduction using overlaid multiple projection images,” Proc. SPIE7237, 723709 (2009).
  17. M. Yamasaki, H. Sakai, T. Koike, and M. Oikawa, “Full-parallax autostereoscopic display with scalable lateral resolution using overlaid multiple projection,” J. Soc. Inf. Disp.18(7), 494–500 (2010). [CrossRef]
  18. A. Said and E.-V. Talvala, “Spatial-angular analysis of displays for reproduction of light fields,” Proc. SPIE7237, 723707 (2009).

Cited By

Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.


« Previous Article  |  Next Article »

OSA is a member of CrossRef.

CrossCheck Deposited