OSA's Digital Library

Virtual Journal for Biomedical Optics

Virtual Journal for Biomedical Optics

| EXPLORING THE INTERFACE OF LIGHT AND BIOMEDICINE

  • Editors: Andrew Dunn and Anthony Durkin
  • Vol. 8, Iss. 8 — Sep. 4, 2013

Graded-index fiber tip optical tweezers: Numerical simulation and trapping experiment

Yuan Gong, Ai-Yan Ye, Yu Wu, Yun-Jiang Rao, Yao Yao, and Song Xiao  »View Author Affiliations


Optics Express, Vol. 21, Issue 13, pp. 16181-16190 (2013)
http://dx.doi.org/10.1364/OE.21.016181


View Full Text Article

Enhanced HTML    Acrobat PDF (1638 KB) Open Access





Browse Journals / Lookup Meetings

Browse by Journal and Year


   


Lookup Conference Papers

Close Browse Journals / Lookup Meetings

Article Tools

Share
Citations

Abstract

Optical fiber tweezers based on a graded-index multimode fiber (GIMMF) tip is proposed. Light propagation characteristics and gradient force distribution near the GIMMF tip are numerically investigated, which are further compared with that of optical fiber tips based on conventional single mode fibers. The simulated results indicated that by selecting optimal GIMMF length, the gradient force of the GIMMF tip tweezers is about 4 times higher than that of the SMF tip tweezers with a same shape. To prove the feasibility of such a new concept, optical trapping of yeast cells with a diameter of ~5 μm using the chemically-etched GIMMF tip is experimentally demonstrated and the trapping force is also calculated.

© 2013 OSA

OCIS Codes
(060.2280) Fiber optics and optical communications : Fiber design and fabrication
(140.7010) Lasers and laser optics : Laser trapping
(350.4855) Other areas of optics : Optical tweezers or optical manipulation

ToC Category:
Optical Trapping and Manipulation

History
Original Manuscript: June 6, 2013
Manuscript Accepted: June 18, 2013
Published: June 28, 2013

Virtual Issues
Vol. 8, Iss. 8 Virtual Journal for Biomedical Optics

Citation
Yuan Gong, Ai-Yan Ye, Yu Wu, Yun-Jiang Rao, Yao Yao, and Song Xiao, "Graded-index fiber tip optical tweezers: Numerical simulation and trapping experiment," Opt. Express 21, 16181-16190 (2013)
http://www.opticsinfobase.org/vjbo/abstract.cfm?URI=oe-21-13-16181


Sort:  Author  |  Year  |  Journal  |  Reset  

References

  1. A. Ashkin, J. M. Dziedzic, J. E. Bjorkholm, and S. Chu, “Observation of a single-beam gradient force optical trap for dielectric particles,” Opt. Lett.11(5), 288–290 (1986). [CrossRef] [PubMed]
  2. K. C. Neuman and S. M. Block, “Optical trapping,” Rev. Sci. Instrum.75(9), 2787–2809 (2004). [CrossRef] [PubMed]
  3. D. G. Grier, “A revolution in optical manipulation,” Nature424(6950), 810–816 (2003). [CrossRef] [PubMed]
  4. Z. Liu, C. Guo, J. Yang, and L. Yuan, “Tapered fiber optical tweezers for microscopic particle trapping: fabrication and application,” Opt. Express14(25), 12510–12516 (2006). [CrossRef] [PubMed]
  5. L. Yuan, Z. Liu, and J. Yang, “Measurement approach of Brownian motion force by an abrupt tapered fiber optic tweezers,” Appl. Phys. Lett.91(5), 054101 (2007). [CrossRef]
  6. L. Yuan, Z. Liu, J. Yang, and C. Guan, “Twin-core fiber optical tweezers,” Opt. Express16(7), 4559–4566 (2008). [CrossRef] [PubMed]
  7. G. Brambilla and F. Xu, “Adiabatic submicrometric tapers for optical tweezers,” Electron. Lett.43(4), 204–205 (2007). [CrossRef]
  8. S. K. Mohanty, K. S. Mohanty, and M. W. Berns, “Manipulation of mammalian cells using a single-fiber optical microbeam,” J. Biomed. Opt.13(5), 054049 (2008). [CrossRef] [PubMed]
  9. S. K. Mohanty, K. S. Mohanty, and M. W. Berns, “Organization of microscale objects using a microfabricated optical fiber,” Opt. Lett.33(18), 2155–2157 (2008). [CrossRef] [PubMed]
  10. K. S. Mohanty, C. Liberale, S. K. Mohanty, and V. Degiorgio, “In depth fiber optic trapping of low-index microscopic objects,” Appl. Phys. Lett.92(15), 151113 (2008). [CrossRef]
  11. Z. Hu, J. Wang, and J. Liang, “Manipulation and arrangement of biological and dielectric particles by a lensed fiber probe,” Opt. Express12(17), 4123–4128 (2004). [CrossRef] [PubMed]
  12. J. Guck, R. Ananthakrishnan, H. Mahmood, T. J. Moon, C. C. Cunningham, and J. Käs, “The optical stretcher: a novel laser tool to micromanipulate cells,” Biophys. J.81(2), 767–784 (2001). [CrossRef] [PubMed]
  13. P. B. Bareil, Y. Sheng, Y. Q. Chen, and A. Chiou, “Calculation of spherical red blood cell deformation in a dual-beam optical stretcher,” Opt. Express15(24), 16029–16034 (2007). [CrossRef] [PubMed]
  14. J. M. Tam, I. Biran, and D. R. Walt, “An imaging fiber-based optical tweezer array for microparticle array assembly,” Appl. Phys. Lett.84(21), 4289–4291 (2004). [CrossRef]
  15. J. M. Tam, I. Biran, and D. R. Walt, “Parallel microparticle manipulation using an imaging fiber-bundle-based optical tweezer array and a digital micromirror device,” Appl. Phys. Lett.89(19), 194101 (2006). [CrossRef]
  16. C. Liberale, P. Minzioni, F. Bragheri, F. de Angelis, E. di Fabrizio, and I. Cristiani, “Miniaturized all-fibre probe for three-dimensional optical trapping and manipulation,” Nat. Photonics1(12), 723–727 (2007). [CrossRef]
  17. F. Bragheri, P. Minzioni, C. Liberale, E. Di Fabrizio, and I. Cristiani, “Design and optimization of a reflection-based fiber-optic tweezers,” Opt. Express16(22), 17647–17653 (2008). [CrossRef] [PubMed]
  18. C. Youngchul and D. Nadr, “An assessment of finite difference beam propagation method,” IEEE J. Quantum Electron.26(8), 1335–1339 (1990). [CrossRef]
  19. M. Ohtsu, “Progress of high-resolution photon scanning tunneling microscopy due to a nanometric fiber probe,” IEEE/OSA J. Lightw. Tech.13(7), 1200–1221 (1995). [CrossRef]
  20. A. Klini, T. David, E. Bourillot, S. Emonin, P. Papadopoulos, J. P. Goudonnet, and G. Kotrotsios, “Reproducible optical fiber tips for photon scanning tunneling microscopy with very small (<5°) cone angle,” IEEE/OSA J. Lightw. Tech.16(7), 1220–1227 (1998). [CrossRef]
  21. S. Mononobe, R. U. Maheswari, and M. Ohtsu, “Fabrication of a pencil-shaped fiber probe with a nanometric protrusion from a metal film for near-field optical microscopy,” Opt. Express1(8), 229–233 (1997). [CrossRef] [PubMed]
  22. Y. H. Chuang, K. G. Sun, C. J. Wang, J. Y. Huang, and C. L. Pan, “A simple chemical etching technique for reproducible fabrication of robust scanning near-field fiber probes,” Rev. Sci. Instrum.69(2), 437–439 (1998). [CrossRef]
  23. P. Hoffmann, B. Dutoit, and R. P. Salathe, “Comparison of mechanically drawn and protection layer chemically etched optical fiber tips,” Ultramicroscopy61(1-4), 165–170 (1995). [CrossRef]
  24. Y. Gong, T. Zhao, Y. J. Rao, Y. Wu, and Y. Guo, “A ray-transfer-matrix model for hybrid fiber Fabry-Perot sensor based on graded-index multimode fiber,” Opt. Express18(15), 15844–15852 (2010). [CrossRef] [PubMed]

Cited By

Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.

Multimedia

Multimedia FilesRecommended Software
» Media 1: MOV (5587 KB)     

« Previous Article  |  Next Article »

OSA is a member of CrossRef.

CrossCheck Deposited