Sub-25-nm laboratory x-ray microscopy using a compound Fresnel zone plate
Optics Letters, Vol. 34, Issue 17, pp. 2631-2633 (2009)
http://dx.doi.org/10.1364/OL.34.002631
Enhanced HTML 
Acrobat PDF (328 KB)
Abstract
Improving the resolution in x-ray microscopes is of high priority to enable future applications in nanoscience. However, high-resolution zone-plate optics often have low efficiency, which makes implementation in laboratory microscopes difficult. We present a laboratory x-ray microscope based on a compound zone plate. The compound zone plate utilizes multiple diffraction orders to achieve high resolution while maintaining reasonable efficiency. We analyze the illumination conditions necessary for this type of optics in order to suppress stray light and demonstrate microscopic imaging resolving
© 2009 Optical Society of America
OCIS Codes
(340.0340) X-ray optics : X-ray optics
(340.7460) X-ray optics : X-ray microscopy
ToC Category:
X-ray Optics
History
Original Manuscript: April 1, 2009
Revised Manuscript: July 22, 2009
Manuscript Accepted: July 31, 2009
Published: August 25, 2009
Virtual Issues
Vol. 4, Iss. 11 Virtual Journal for Biomedical Optics
Citation
Olov von Hofsten, Michael Bertilson, Julia Reinspach, Anders Holmberg, Hans M. Hertz, and Ulrich Vogt, "Sub-25-nm laboratory x-ray microscopy using a compound Fresnel zone plate," Opt. Lett. 34, 2631-2633 (2009)
http://www.opticsinfobase.org/vjbo/abstract.cfm?URI=ol-34-17-2631
You do not have subscription access to this journal. Citation lists with outbound citation links are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Log in to access OSA Member Subscription
You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Log in to access OSA Member Subscription
You do not have subscription access to this journal. Figure files are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Log in to access OSA Member Subscription
You do not have subscription access to this journal. Article level metrics are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Log in to access OSA Member Subscription
Related Journal Articles 
- Fast Imaging of Hard X Rays with a Laboratory Microscope (AO)
- Influence of Fabrication Errors on Wölter Mirror Imaging Performance (AO)
- Refractive microlens array for wave-front analysis in the medium to hard x-ray range (OL)
- Design and Imaging Performance of Achromatic Diffractive-Refractive X-Ray and Gamma-Ray Fresnel Lenses (AO)
- Efficiency of an Elliptically Shaped X-Ray Mirror (AO)
« Previous Article | Next Article »
OSA is a member of 