OSA's Digital Library

Virtual Journal for Biomedical Optics

Virtual Journal for Biomedical Optics

| EXPLORING THE INTERFACE OF LIGHT AND BIOMEDICINE

  • Editors: Andrew Dunn and Anthony Durkin
  • Vol. 9, Iss. 3 — Mar. 6, 2014
« Show journal navigation

Compact suspended silicon microring resonators with ultrahigh quality

Wei C. Jiang, Jidong Zhang, and Qiang Lin  »View Author Affiliations


Optics Express, Vol. 22, Issue 1, pp. 1187-1192 (2014)
http://dx.doi.org/10.1364/OE.22.001187


View Full Text Article

Acrobat PDF (8504 KB)





Browse Journals / Lookup Meetings

Browse by Journal and Year


   


Lookup Conference Papers

Close Browse Journals / Lookup Meetings

Article Tools

Share
Citations

Abstract

We propose and demonstrate compact suspended silicon microring resonators with ultra-high optical quality. We achieve an intrinsic quality factor of 9.2 × 105 for the resonator with a radius of 9 μm. The high optical quality factor, high optical confinement together with the suspended structure of our device enable great potential for broad applications in biosensing, quantum photonics, nonlinear photonics, cavity optomechanics, and optical signal processing.

© 2014 Optical Society of America

The significant advance of silicon photonics in recent years have found very broad applications ranging from signal processing [1

1. G. T. Reed, G. Mashanovich, F. Y. Gardes, and D. J. Thomson, “Silicon optical modulators,” Nat. Photonics 4, 518–526 (2010). [CrossRef]

], nonlinear photonics [2

2. J. Leuthold, C. Koos, and W. Freude, “Nonlinear silicon photonics,” Nat. Photonics 4, 535–544 (2010). [CrossRef]

], biosensing [3

3. F. Dell’Olio and V. M. N. Passaro, “Optical sensing by optimized silicon slot waveguides,” Opt. Express 15, 4977–4993 (2007). [CrossRef]

, 4

4. K. De Vos, I. Bartolozzi, E. Schacht, P. Bienstman, and R. Baets, “Silicon-on-insulator microring resonator for sensitive and label-free biosensing,” Opt. Express 15, 7610–7615 (2007). [CrossRef] [PubMed]

], quantum photonics [5

5. S. Clemmen, K. Phan Huy, W. Bogaerts, R. G. Baets, Ph. Emplit, and S. Massar, “Coutinuous wave photon pair generation in silicon-on-insulator waveguides and ring resonators,” Opt. Express 17, 16558–16570 (2009). [CrossRef] [PubMed]

7

7. W. C. Jiang, X. Lu, J. Zhang, O. Painter, and Q. Lin, “A silicon-chip source of bright photon-pair comb,” arXiv:1210.4455v1 (2012).

], to cavity optomechanics [8

8. M. Li, W. H. P. Pernice, C. Xiong, T. Baehr-Jones, M. Hochberg, and H. X. Tang, “Harnessing optical forces in integrated photonic circuits,” Nature 456, 480–484 (2008). [CrossRef] [PubMed]

]. An essential underlying component is silicon wire waveguide (SWW) [9

9. K. Yamada, “Silicon photonic wire waveguides: fundamental and applications,” in Silicon Photonics II, Vol. 119 in Topics in Applied Physics, D. J. Lockwood and L. Pavesi, eds. (Springer, 2011), pp. 1–29. [CrossRef]

, 10

10. W. Bogaerts, P. De Heyn, T. Van Vaerenbergh, K. De Vos, S. K. Selvaraja, T. Claes, P. Dumon, P. Bienstman, D. Van Thourhout, and R. Baets, “Silicon microring resonators,” Laser & Photon. Rev. 6, 47–73 (2012). [CrossRef]

] which provides strong mode confinement for light guidance. However, with a high index contrast, SWWs are very sensitive to waveguide sidewall roughness introduced by fabrication imperfection, resulting in significant scattering losses. In recent years, tremendous efforts have been devoted to improve the quality of silicon photonic waveguides [11

11. Y. A. Vlasov and S. J. McNab, “Losses in single-mode silicon-on-insulator strip waveguides and bends,” Opt. Express 12, 1622–1631 (2004). [CrossRef] [PubMed]

21

21. A. Griffith, J. Cardenas, C. B. Poitras, and M. Lipson, “High quality factor and high confinement silicon resonators using etchless process,” Opt. Express 20, 21341–21345 (2012). [CrossRef] [PubMed]

].

In general, a SWW is fabricated on a silicon-on-insulator (SOI) platform, with the silicon core sitting on top of a buried-oxide layer [11

11. Y. A. Vlasov and S. J. McNab, “Losses in single-mode silicon-on-insulator strip waveguides and bends,” Opt. Express 12, 1622–1631 (2004). [CrossRef] [PubMed]

,12

12. J. Niehusmann, A. Vörckel, P. H. Bolivar, T. Wahlbrink, W. Henschel, and Heinrich Kurz, “Ultrahigh-quality-factor silicon-on-insulator microring resonator,” Opt. Lett. 29, 2861–2863 (2004). [CrossRef]

,14

14. S. Xiao, M. H. Khan, H. Shen, and M. Qi, “Compact silicon microring resonators with ultra-low propagation lass in the C band,” Opt. Express 15, 14467–14475 (2007). [CrossRef] [PubMed]

17

17. R. Guider, N. Daldosso, A. Pitanti, E. Jordana, J. M. Fedeli, and L. Pavesi, “NanoSi low loss horizontal slot waveguides coupled to high Q ring resonators,” Opt. Express 17, 20762–20770 (2009). [CrossRef] [PubMed]

], or embedded inside an oxide cladding for reducing scattering loss [18

18. P. Dong, W. Qian, S. Liao, H. Liang, C.-C. Kung, N.-N. Feng, R. Shafiiha, J. Fong, D. Feng, A. V. Krishnamoorthy, and M. Asghari, “Low loss shallow-ridge silicon waveguides,” Opt. Express 18, 14474–14479 (2010). [CrossRef] [PubMed]

21

21. A. Griffith, J. Cardenas, C. B. Poitras, and M. Lipson, “High quality factor and high confinement silicon resonators using etchless process,” Opt. Express 20, 21341–21345 (2012). [CrossRef] [PubMed]

]. However, a SWW with a complete air cladding is more favorable for many applications. For example, a complete air cladding increases the exposure of optical guided modes to the ambient medium, leading to an improved sensitivity for sensing application. On the other hand, it dramatically reduces the clamping loss of the waveguide structure, with a greatly improved mechanical Q for optomechanical applications. Moreover, it eliminates any potential impact of the oxide layer, particularly suitable for mid-infrared photonics where silica exhibits significant absorption [22

22. R. A. Soref, S. J. Emelett, and W. R. Buchwald, “Silicon waveguided componenets for the long-wave infrared region,” J. Opt. A 8, 840–848 (2006). [CrossRef]

24

24. Y. Xia, C. Qiu, X. Zhang, W. Gao, J. Shu, and Q. Xu, “Suspended Si ring resonator for mid-IR application,” Opt. Lett. 38, 1122–1124 (2013). [CrossRef] [PubMed]

].

In this paper, we propose and demonstrate a unique waveguide structure to realize compact high quality silicon microring resonators suspended in the air. For a bending radius of 9 μm, our suspended microrings can achieve an intrinsic optical Q of Qi = 9.2 × 105 in the telecom band. To the best of our knowledge, it is the highest value for silicon microring resonators with such a small radius reported to date [10

10. W. Bogaerts, P. De Heyn, T. Van Vaerenbergh, K. De Vos, S. K. Selvaraja, T. Claes, P. Dumon, P. Bienstman, D. Van Thourhout, and R. Baets, “Silicon microring resonators,” Laser & Photon. Rev. 6, 47–73 (2012). [CrossRef]

,12

12. J. Niehusmann, A. Vörckel, P. H. Bolivar, T. Wahlbrink, W. Henschel, and Heinrich Kurz, “Ultrahigh-quality-factor silicon-on-insulator microring resonator,” Opt. Lett. 29, 2861–2863 (2004). [CrossRef]

14

14. S. Xiao, M. H. Khan, H. Shen, and M. Qi, “Compact silicon microring resonators with ultra-low propagation lass in the C band,” Opt. Express 15, 14467–14475 (2007). [CrossRef] [PubMed]

,20

20. M. P. Nezhad, O. Bondarenko, M. Khajavikhan, A. Simic, and Y. Fainman, “Etch-free low loss silicon waveguides using hydrogen silsesquioxane oxidation masks,” Opt. Express 19, 18827–18832 (2011). [CrossRef] [PubMed]

,21

21. A. Griffith, J. Cardenas, C. B. Poitras, and M. Lipson, “High quality factor and high confinement silicon resonators using etchless process,” Opt. Express 20, 21341–21345 (2012). [CrossRef] [PubMed]

], even without any post-etching processing for surface passivation [25

25. M. Borselli, T. J. Johnson, and O. Painter, “Beyond the Rayleigh scattering limit in high-Q silicon microdisks: theory and experiment,” Opt. Express 13, 1515–1530 (2005). [CrossRef] [PubMed]

].

Our proposed devices were fabricated using two-step electron beam lithography (EBL) and inductively-coupled-plasma (ICP) reactive-ion-etching (RIE) on an SOI wafer, with a top silicon layer thickness of 260 nm and a buried oxide thickness of 2 μm. The detailed processing procedure is shown in Fig. 1. First, the inner circle of the suspended microring was patterned with ZEP-520A positive resist by EBL system. In order to reduce the sidewall roughness, a post exposure bake was employed to reflow the resist. The silicon layer was then partially etched by fluorine-based ICP RIE using C4F8/SF6 chemistry. The etching time was precisely controlled, resulting in a thin slab layer of silicon with a thickness of about 60 nm. The etching parameters were optimized to achieve a smooth waveguide sidewall. Subsequently, the outer circle of the microring was patterned by second EBL with high-precision alignment, of which the overlay accuracy is less than 25 nm. After the resist reflow, the silicon layer was thoroughly etched by the fluorine-based ICP. Finally, the buried oxide layer was isotropically etched by a low-pressure vapor hydrogen fluoride (HF) etcher, resulting in a suspended silicon microring supported by a thin silicon slab on an oxide pedestal.

Fig. 1 Schematic of the fabrication process flow for the suspended silicon microrings. (a) EBL patterning for the inner circle of the microring using ZEP-520A resist. (b) ICP partial etching of silicon. (c) Second EBL patterning with high-precision alignment for the outer circle of the microring. (d) Thorough ICP etching of silicon. (e) Isotropic etching of oxide by HF gas to form the pedestal.

We designed and fabricated two sets of microring resonators with a waveguide core width w = 750 nm but different radii of 9 and 4.5 μm. Figure 2(b) shows a scanning-electron microscopic (SEM) image of the fabricated device with radius of 4.5 μm, showing a suspended waveguide structure sitting on a silica pedestal. The zoom-in image of the device sidewall in Fig. 2(c) clearly shows a very smooth waveguide sidewall, resulting from the optimization of dry-etching process. To characterize the optical quality of the devices, we launched a continuous-wave tunable laser into the devices by near-field evanescent coupling via a tapered optical fiber (typical diameter is ∼ 1 μm) and recorded the cavity transmission as a function of laser wavelength which is calibrated by a Mach-Zehnder interferometer (Fig. 3(a)).

Fig. 2 (a) Optical field profile of the fundamental quasi-TE mode, showing the electric field component lying in the device plane. It is simulated by the finite-element method, with waveguide width w = 750 nm, height h = 260 nm, and slab thickness t = 60 nm. (b) SEM image of a suspended silicon microring with a radius of 4.5 μm. (c) SEM image of the device sidewall.
Fig. 3 (a) Schematic of the experimental setup. VOA: variable optical attenuator; MZI: Mach-Zehnder interferometer. (b) and (c) Recorded cavity transmissions (blue) of the suspended silicon microrings with a radius of 9 and 4.5 μm, respectively, for resonance wavelengths at 1504 and 1524 nm. The theoretical fittings are shown in red.

Figure 3(b) and 3(c) show the recorded cavity transmission spectra of a fundamental quasi-transverse electric (quasi-TE) mode for the devices with radii of 9 and 4.5 μm, respectively. By fitting the transmission spectrum (Fig. 3(b)), we obtain an intrinsic quality factor of Qi = 9.2 × 105 for the microring with a radius of 9 μm, which is the highest optical Q for such compact silicon microring resonators, to the best of our knowledge [10

10. W. Bogaerts, P. De Heyn, T. Van Vaerenbergh, K. De Vos, S. K. Selvaraja, T. Claes, P. Dumon, P. Bienstman, D. Van Thourhout, and R. Baets, “Silicon microring resonators,” Laser & Photon. Rev. 6, 47–73 (2012). [CrossRef]

, 12

12. J. Niehusmann, A. Vörckel, P. H. Bolivar, T. Wahlbrink, W. Henschel, and Heinrich Kurz, “Ultrahigh-quality-factor silicon-on-insulator microring resonator,” Opt. Lett. 29, 2861–2863 (2004). [CrossRef]

14

14. S. Xiao, M. H. Khan, H. Shen, and M. Qi, “Compact silicon microring resonators with ultra-low propagation lass in the C band,” Opt. Express 15, 14467–14475 (2007). [CrossRef] [PubMed]

, 20

20. M. P. Nezhad, O. Bondarenko, M. Khajavikhan, A. Simic, and Y. Fainman, “Etch-free low loss silicon waveguides using hydrogen silsesquioxane oxidation masks,” Opt. Express 19, 18827–18832 (2011). [CrossRef] [PubMed]

, 21

21. A. Griffith, J. Cardenas, C. B. Poitras, and M. Lipson, “High quality factor and high confinement silicon resonators using etchless process,” Opt. Express 20, 21341–21345 (2012). [CrossRef] [PubMed]

]. The corresponding propagation loss [26

26. P. Rabiei, W. H. Steier, C. Zhang, and L. R. Dalton, “Polymer micro-ring filters and modulators,” J. Lightwave Technol. 20, 1968–1975 (2002). [CrossRef]

] is 0.76 dB/cm. The microring with a radius of 4.5 μm (Fig. 3(c)) also exhibits a high intrinsic optical Q of Qi = 3.5 × 105, which is very attractive for such a small footprint. Its lower Q compared with the 9-μm device is primarily due to its higher sensitivity to the device outer sidewall, as inferred by its doublet feature which originates from the coupling between the degenerate clockwise and counter-clockwise cavity modes introduced by light scattering from outer sidewall roughness.

The demonstrated high-Q suspended silicon microring resonators exhibit great potential for a variety of applications. One example is to produce high-purity photon pairs through cavity-enhanced four-wave mixing [5

5. S. Clemmen, K. Phan Huy, W. Bogaerts, R. G. Baets, Ph. Emplit, and S. Massar, “Coutinuous wave photon pair generation in silicon-on-insulator waveguides and ring resonators,” Opt. Express 17, 16558–16570 (2009). [CrossRef] [PubMed]

7

7. W. C. Jiang, X. Lu, J. Zhang, O. Painter, and Q. Lin, “A silicon-chip source of bright photon-pair comb,” arXiv:1210.4455v1 (2012).

]. The high optical Q introduces significant Purcell effect on all cavity modes to drastically enhance the photon generation efficiency and the quantum-state purity [7

7. W. C. Jiang, X. Lu, J. Zhang, O. Painter, and Q. Lin, “A silicon-chip source of bright photon-pair comb,” arXiv:1210.4455v1 (2012).

]. The complete air cladding of the microring eliminates any potential noise from the cladding material [7

7. W. C. Jiang, X. Lu, J. Zhang, O. Painter, and Q. Lin, “A silicon-chip source of bright photon-pair comb,” arXiv:1210.4455v1 (2012).

], e.g., the Raman noise photons from the oxide substrate. In particular, the suspended microring allows very flexible engineering of waveguide dispersion which is crucial for the underlying four-wave mixing process. The group-velocity dispersion (GVD) can be controlled through both the thickness of the thin supporting slab (t, see Fig. 2(a)) and the size of the waveguide core. As shown in Fig. 4(a), for a suspended silicon waveguide with a core area of 800 nm × 260 nm, the zero-dispersion wavelength (ZDWL) of the fundamental quasi-TE mode can be tailored by 70 nm within the telecom band as t varies from 50 nm to 90 nm. Figure 4(b) shows that ZDWL can be tailored with a tuning range of larger than 200 nm by adjusting the waveguide width and/or slab thickness.

Fig. 4 (a) Simulated group-velocity dispersion for the fundamental quasi-TE mode (see Fig. 2(a)) of a suspended waveguide by varying the slab thickness t, assuming w = 800 nm and h = 260 nm. (b) Simulated zero-dispersion wavelength for the same mode as a function of the waveguide width and slab thickness. The waveguide height is fixed at h = 260 nm.

Fig. 5 (a) Schematic of a suspended silicon waveguide and (b) Schematic of a conventional SOI wire waveguide for sensing the refractive index variation in the cladding medium. (c) Simulated BWS, for the fundamental quasi-TM mode (red) of the suspended silicon waveguide with h = 250 nm and t = 50 nm, fundamental quasi-TM (green) and quasi-TE (blue) modes of the SOI wire waveguide with a same height of h = 250 nm. The insets show the corresponding Ex component for quasi-TE and Ey component for quasi-TM mode.

Figure 5 compares the simulated BWS of a suspended silicon waveguide with a conventional SWW, with the same dimension, sitting on top of an oxide layer (Fig. 5(a) and 5(b)). For both cases, we assume that the devices are immersed in an aqueous solution with nc = 1.333, with a probing laser wavelength at 1550 nm. Figure 5 shows clearly that the quasi-TM mode of the suspended waveguide exhibits a BWS much higher than a conventional SOI wire waveguide. In particular, when the waveguide width is smaller than 350 nm, the field-analyte interaction becomes so strong that the BWS of the suspended waveguide is even greater than unity. Among all other dielectric waveguides, this magnitude of BWS can only be achieved with optimized SOI slot waveguides [3

3. F. Dell’Olio and V. M. N. Passaro, “Optical sensing by optimized silicon slot waveguides,” Opt. Express 15, 4977–4993 (2007). [CrossRef]

]. However, our proposed suspended structure exhibits a significant structure simplicity and is much easier to fabricate in practice, compared with a slot waveguide which requires extremely critical control of the subwavelength-size air slot and generally suffers from serious scattering losses due to surface roughness on multiple interfaces. Therefore, our proposed device can offer a much higher optical quality, thus implying a better detection limit [27

27. I. M. White and X. Fan, “On the performance quantification of resonant refractive index sensors,” Opt. Express 16, 1020–1028 (2008). [CrossRef] [PubMed]

].

In summary, we have demonstrated high-quality compact suspended silicon microring resonators with an intrinsic Q factor of 9.2 × 105 for a bending radius of 9 μm, the highest Q reported to date for such compact silicon ring resonators. It corresponds to a propagation loss as low as 0.76 dB/cm. Our simulations show that the proposed waveguide structure has great capability of dispersion engineering for nonlinear photonic and quantum photonic applications. In particular, it is ideal for biological and chemical sensing, with excellent combination of high sensitivity and low detection limit. Although we demonstrate the suspended microring structure on silicon, the same idea can readily be applied for other material platforms such as silica, silicon nitride, etc. We expect that the proposed suspended microring resonators would become an ideal device platform for broad applications in biosensing, quantum photonics, nonlinear photonics, cavity optomechanics, and optical signal processing.

Acknowledgments

This work was supported by the National Science Foundation (NSF) under grant ECCS-1351697, and was performed in part at the Cornell NanoScale Facility, a member of the National Nanotechnology Infrastructure Network, which is supported by NSF (Grant ECS-0335765).

References and links

1.

G. T. Reed, G. Mashanovich, F. Y. Gardes, and D. J. Thomson, “Silicon optical modulators,” Nat. Photonics 4, 518–526 (2010). [CrossRef]

2.

J. Leuthold, C. Koos, and W. Freude, “Nonlinear silicon photonics,” Nat. Photonics 4, 535–544 (2010). [CrossRef]

3.

F. Dell’Olio and V. M. N. Passaro, “Optical sensing by optimized silicon slot waveguides,” Opt. Express 15, 4977–4993 (2007). [CrossRef]

4.

K. De Vos, I. Bartolozzi, E. Schacht, P. Bienstman, and R. Baets, “Silicon-on-insulator microring resonator for sensitive and label-free biosensing,” Opt. Express 15, 7610–7615 (2007). [CrossRef] [PubMed]

5.

S. Clemmen, K. Phan Huy, W. Bogaerts, R. G. Baets, Ph. Emplit, and S. Massar, “Coutinuous wave photon pair generation in silicon-on-insulator waveguides and ring resonators,” Opt. Express 17, 16558–16570 (2009). [CrossRef] [PubMed]

6.

S. Azzini, D. Grassani, M. J. Strain, M. Sorel, L. G. Helt, J. E. Sipe, M. Liscidini, M. Galli, and D. Bajoni, “Ultra-low power generation of twin photons in a compact silicon ring resonator,” Opt. Express 20, 23100–23107 (2012). [CrossRef] [PubMed]

7.

W. C. Jiang, X. Lu, J. Zhang, O. Painter, and Q. Lin, “A silicon-chip source of bright photon-pair comb,” arXiv:1210.4455v1 (2012).

8.

M. Li, W. H. P. Pernice, C. Xiong, T. Baehr-Jones, M. Hochberg, and H. X. Tang, “Harnessing optical forces in integrated photonic circuits,” Nature 456, 480–484 (2008). [CrossRef] [PubMed]

9.

K. Yamada, “Silicon photonic wire waveguides: fundamental and applications,” in Silicon Photonics II, Vol. 119 in Topics in Applied Physics, D. J. Lockwood and L. Pavesi, eds. (Springer, 2011), pp. 1–29. [CrossRef]

10.

W. Bogaerts, P. De Heyn, T. Van Vaerenbergh, K. De Vos, S. K. Selvaraja, T. Claes, P. Dumon, P. Bienstman, D. Van Thourhout, and R. Baets, “Silicon microring resonators,” Laser & Photon. Rev. 6, 47–73 (2012). [CrossRef]

11.

Y. A. Vlasov and S. J. McNab, “Losses in single-mode silicon-on-insulator strip waveguides and bends,” Opt. Express 12, 1622–1631 (2004). [CrossRef] [PubMed]

12.

J. Niehusmann, A. Vörckel, P. H. Bolivar, T. Wahlbrink, W. Henschel, and Heinrich Kurz, “Ultrahigh-quality-factor silicon-on-insulator microring resonator,” Opt. Lett. 29, 2861–2863 (2004). [CrossRef]

13.

J. Yao, D. Leuenberger, M.-C. M. Lee, and M. C. Wu, “Silicon microtoroidal resonators with integrated MEMS tunable coupler,” IEEE J. Sel. Top. Quant. Electron. 13, 202–208 (2007). [CrossRef]

14.

S. Xiao, M. H. Khan, H. Shen, and M. Qi, “Compact silicon microring resonators with ultra-low propagation lass in the C band,” Opt. Express 15, 14467–14475 (2007). [CrossRef] [PubMed]

15.

S. K. Selvaraja, P. Jaenen, W. Bogaerts, D. Van Thourhout, P. Dumon, and R. Baets, “Fabrication of photonic wire and crystal circuits in silicon-on-insulator using 193-nm optical lithography,” J. Lightwave Technol. 27, 4076–4083 (2009). [CrossRef]

16.

R. Pafchek, R. Tummidi, J. Li, M. A. Webster, E. Chen, and T. L. Koch, “Low-loss silicon-on-insulator shallow-ridge TE and TM waveguides formed using thermal oxidation,” Appl. Opt. 48, 958–963 (2009). [CrossRef] [PubMed]

17.

R. Guider, N. Daldosso, A. Pitanti, E. Jordana, J. M. Fedeli, and L. Pavesi, “NanoSi low loss horizontal slot waveguides coupled to high Q ring resonators,” Opt. Express 17, 20762–20770 (2009). [CrossRef] [PubMed]

18.

P. Dong, W. Qian, S. Liao, H. Liang, C.-C. Kung, N.-N. Feng, R. Shafiiha, J. Fong, D. Feng, A. V. Krishnamoorthy, and M. Asghari, “Low loss shallow-ridge silicon waveguides,” Opt. Express 18, 14474–14479 (2010). [CrossRef] [PubMed]

19.

S. Y. Zhu, G. Q. Lo, and D. L. Kwong, “Low-loss amorphous silicon wire waveguide for integrated photonics: effect of fabrication process and the thermal stability,” Opt. Express 18, 25283–25291 (2010). [CrossRef] [PubMed]

20.

M. P. Nezhad, O. Bondarenko, M. Khajavikhan, A. Simic, and Y. Fainman, “Etch-free low loss silicon waveguides using hydrogen silsesquioxane oxidation masks,” Opt. Express 19, 18827–18832 (2011). [CrossRef] [PubMed]

21.

A. Griffith, J. Cardenas, C. B. Poitras, and M. Lipson, “High quality factor and high confinement silicon resonators using etchless process,” Opt. Express 20, 21341–21345 (2012). [CrossRef] [PubMed]

22.

R. A. Soref, S. J. Emelett, and W. R. Buchwald, “Silicon waveguided componenets for the long-wave infrared region,” J. Opt. A 8, 840–848 (2006). [CrossRef]

23.

P. T. Lin, V. Singh, Y. Cai, L. C. Kimerling, and A. Agarwal, “Air-clad silicon pedestal structures for broadband mid-infrared microphotonics,” Opt. Lett. 38, 1031–1033 (2013). [CrossRef] [PubMed]

24.

Y. Xia, C. Qiu, X. Zhang, W. Gao, J. Shu, and Q. Xu, “Suspended Si ring resonator for mid-IR application,” Opt. Lett. 38, 1122–1124 (2013). [CrossRef] [PubMed]

25.

M. Borselli, T. J. Johnson, and O. Painter, “Beyond the Rayleigh scattering limit in high-Q silicon microdisks: theory and experiment,” Opt. Express 13, 1515–1530 (2005). [CrossRef] [PubMed]

26.

P. Rabiei, W. H. Steier, C. Zhang, and L. R. Dalton, “Polymer micro-ring filters and modulators,” J. Lightwave Technol. 20, 1968–1975 (2002). [CrossRef]

27.

I. M. White and X. Fan, “On the performance quantification of resonant refractive index sensors,” Opt. Express 16, 1020–1028 (2008). [CrossRef] [PubMed]

OCIS Codes
(130.3120) Integrated optics : Integrated optics devices
(230.4000) Optical devices : Microstructure fabrication
(230.5750) Optical devices : Resonators
(260.2030) Physical optics : Dispersion

ToC Category:
Integrated Optics

History
Original Manuscript: October 23, 2013
Revised Manuscript: December 20, 2013
Manuscript Accepted: December 27, 2013
Published: January 10, 2014

Virtual Issues
Vol. 9, Iss. 3 Virtual Journal for Biomedical Optics

Citation
Wei C. Jiang, Jidong Zhang, and Qiang Lin, "Compact suspended silicon microring resonators with ultrahigh quality," Opt. Express 22, 1187-1192 (2014)
http://www.opticsinfobase.org/vjbo/abstract.cfm?URI=oe-22-1-1187


Sort:  Author  |  Year  |  Journal  |  Reset  

References

  1. G. T. Reed, G. Mashanovich, F. Y. Gardes, D. J. Thomson, “Silicon optical modulators,” Nat. Photonics 4, 518–526 (2010). [CrossRef]
  2. J. Leuthold, C. Koos, W. Freude, “Nonlinear silicon photonics,” Nat. Photonics 4, 535–544 (2010). [CrossRef]
  3. F. Dell’Olio, V. M. N. Passaro, “Optical sensing by optimized silicon slot waveguides,” Opt. Express 15, 4977–4993 (2007). [CrossRef]
  4. K. De Vos, I. Bartolozzi, E. Schacht, P. Bienstman, R. Baets, “Silicon-on-insulator microring resonator for sensitive and label-free biosensing,” Opt. Express 15, 7610–7615 (2007). [CrossRef] [PubMed]
  5. S. Clemmen, K. Phan Huy, W. Bogaerts, R. G. Baets, Ph. Emplit, S. Massar, “Coutinuous wave photon pair generation in silicon-on-insulator waveguides and ring resonators,” Opt. Express 17, 16558–16570 (2009). [CrossRef] [PubMed]
  6. S. Azzini, D. Grassani, M. J. Strain, M. Sorel, L. G. Helt, J. E. Sipe, M. Liscidini, M. Galli, D. Bajoni, “Ultra-low power generation of twin photons in a compact silicon ring resonator,” Opt. Express 20, 23100–23107 (2012). [CrossRef] [PubMed]
  7. W. C. Jiang, X. Lu, J. Zhang, O. Painter, Q. Lin, “A silicon-chip source of bright photon-pair comb,” arXiv:1210.4455v1 (2012).
  8. M. Li, W. H. P. Pernice, C. Xiong, T. Baehr-Jones, M. Hochberg, H. X. Tang, “Harnessing optical forces in integrated photonic circuits,” Nature 456, 480–484 (2008). [CrossRef] [PubMed]
  9. K. Yamada, “Silicon photonic wire waveguides: fundamental and applications,” in Silicon Photonics II, Vol. 119 in Topics in Applied Physics, D. J. Lockwood, L. Pavesi, eds. (Springer, 2011), pp. 1–29. [CrossRef]
  10. W. Bogaerts, P. De Heyn, T. Van Vaerenbergh, K. De Vos, S. K. Selvaraja, T. Claes, P. Dumon, P. Bienstman, D. Van Thourhout, R. Baets, “Silicon microring resonators,” Laser & Photon. Rev. 6, 47–73 (2012). [CrossRef]
  11. Y. A. Vlasov, S. J. McNab, “Losses in single-mode silicon-on-insulator strip waveguides and bends,” Opt. Express 12, 1622–1631 (2004). [CrossRef] [PubMed]
  12. J. Niehusmann, A. Vörckel, P. H. Bolivar, T. Wahlbrink, W. Henschel, Heinrich Kurz, “Ultrahigh-quality-factor silicon-on-insulator microring resonator,” Opt. Lett. 29, 2861–2863 (2004). [CrossRef]
  13. J. Yao, D. Leuenberger, M.-C. M. Lee, M. C. Wu, “Silicon microtoroidal resonators with integrated MEMS tunable coupler,” IEEE J. Sel. Top. Quant. Electron. 13, 202–208 (2007). [CrossRef]
  14. S. Xiao, M. H. Khan, H. Shen, M. Qi, “Compact silicon microring resonators with ultra-low propagation lass in the C band,” Opt. Express 15, 14467–14475 (2007). [CrossRef] [PubMed]
  15. S. K. Selvaraja, P. Jaenen, W. Bogaerts, D. Van Thourhout, P. Dumon, R. Baets, “Fabrication of photonic wire and crystal circuits in silicon-on-insulator using 193-nm optical lithography,” J. Lightwave Technol. 27, 4076–4083 (2009). [CrossRef]
  16. R. Pafchek, R. Tummidi, J. Li, M. A. Webster, E. Chen, T. L. Koch, “Low-loss silicon-on-insulator shallow-ridge TE and TM waveguides formed using thermal oxidation,” Appl. Opt. 48, 958–963 (2009). [CrossRef] [PubMed]
  17. R. Guider, N. Daldosso, A. Pitanti, E. Jordana, J. M. Fedeli, L. Pavesi, “NanoSi low loss horizontal slot waveguides coupled to high Q ring resonators,” Opt. Express 17, 20762–20770 (2009). [CrossRef] [PubMed]
  18. P. Dong, W. Qian, S. Liao, H. Liang, C.-C. Kung, N.-N. Feng, R. Shafiiha, J. Fong, D. Feng, A. V. Krishnamoorthy, M. Asghari, “Low loss shallow-ridge silicon waveguides,” Opt. Express 18, 14474–14479 (2010). [CrossRef] [PubMed]
  19. S. Y. Zhu, G. Q. Lo, D. L. Kwong, “Low-loss amorphous silicon wire waveguide for integrated photonics: effect of fabrication process and the thermal stability,” Opt. Express 18, 25283–25291 (2010). [CrossRef] [PubMed]
  20. M. P. Nezhad, O. Bondarenko, M. Khajavikhan, A. Simic, Y. Fainman, “Etch-free low loss silicon waveguides using hydrogen silsesquioxane oxidation masks,” Opt. Express 19, 18827–18832 (2011). [CrossRef] [PubMed]
  21. A. Griffith, J. Cardenas, C. B. Poitras, M. Lipson, “High quality factor and high confinement silicon resonators using etchless process,” Opt. Express 20, 21341–21345 (2012). [CrossRef] [PubMed]
  22. R. A. Soref, S. J. Emelett, W. R. Buchwald, “Silicon waveguided componenets for the long-wave infrared region,” J. Opt. A 8, 840–848 (2006). [CrossRef]
  23. P. T. Lin, V. Singh, Y. Cai, L. C. Kimerling, A. Agarwal, “Air-clad silicon pedestal structures for broadband mid-infrared microphotonics,” Opt. Lett. 38, 1031–1033 (2013). [CrossRef] [PubMed]
  24. Y. Xia, C. Qiu, X. Zhang, W. Gao, J. Shu, Q. Xu, “Suspended Si ring resonator for mid-IR application,” Opt. Lett. 38, 1122–1124 (2013). [CrossRef] [PubMed]
  25. M. Borselli, T. J. Johnson, O. Painter, “Beyond the Rayleigh scattering limit in high-Q silicon microdisks: theory and experiment,” Opt. Express 13, 1515–1530 (2005). [CrossRef] [PubMed]
  26. P. Rabiei, W. H. Steier, C. Zhang, L. R. Dalton, “Polymer micro-ring filters and modulators,” J. Lightwave Technol. 20, 1968–1975 (2002). [CrossRef]
  27. I. M. White, X. Fan, “On the performance quantification of resonant refractive index sensors,” Opt. Express 16, 1020–1028 (2008). [CrossRef] [PubMed]

Cited By

Alert me when this paper is cited

OSA is able to provide readers links to articles that cite this paper by participating in CrossRef's Cited-By Linking service. CrossRef includes content from more than 3000 publishers and societies. In addition to listing OSA journal articles that cite this paper, citing articles from other participating publishers will also be listed.

Figures

Fig. 1 Fig. 2 Fig. 3
 
Fig. 4 Fig. 5
 

« Previous Article  |  Next Article »

OSA is a member of CrossRef.

CrossCheck Deposited